Genetic mapping and quantitative trait locus analysis of fiber quality traits using a three-parent composite population in upland cotton (Gossypium hirsutum L.)

Composite cross populations (CP) developed from three or more cultivars/lines are frequently used to improve agronomic and economic traits in crop cultivar development programs. Employing CP in linkage map construction and quantitative trait locus (QTL) mapping may increase the marker density of upland cotton (Gossypium hirsutum L.) genetic maps, exploit more adequate gene resources and facilitate marker-assisted selection (MAS). To construct a relatively high-density map and identify QTL associated with fiber quality traits in upland cotton, three elite upland cultivars/lines, Yumian 1, CRI 35 and 7,235, were used to obtain the segregating population, Yumian 1/CRI 35//Yumian 1/7,235. A genetic map containing 978 simple sequence repeat (SSR) loci and 69 linkage groups was constructed; the map spanned 4,184.4 cM, covering approximately 94.1% of the entire tetraploid cotton genome. A total of 63 QTL were detected, explaining 8.1–55.8% of the total phenotypic variance: 11 QTL for fiber elongation, 16 QTL for fiber length, 9 QTL for fiber micronaire reading, 10 QTL for fiber strength and 17 QTL for fiber length uniformity. The genetic map and QTL detected for fiber quality traits are promising for further breeding programs of upland cotton with improved fiber quality.     

Construction of a comprehensive PCR-based marker linkage map and QTL mapping for fiber quality traits in upland cotton (Gossypium hirsutum L.)

To facilitate marker assisted selection, there is an urgent need to construct a saturated genetic map of upland cotton (Gossypium hirsutum L.). Four types of markers including SSR, SRAP, morphological marker, and intron targeted intron–exon splice junction (IT-ISJ) marker were used to construct a linkage map with 270 F_2:7 recombinant inbred lines derived from an upland cotton cross (T586 × Yumian 1). A total of 7,508 SSR, 740 IT-ISJ and 384 SRAP primer pairs/combinations were used to screen for polymorphism between the two mapping parents, and the average polymorphisms of three types of molecular markers represented 6.8, 6.6 and 7.0%, respectively. The polymorphic primer pairs/combinations and morphological markers were used to genotype 270 recombinant inbred lines, and a map including 604 loci (509 SSR, 58 IT-ISJ, 29 SRAP and 8 morphological loci) and 60 linkage groups was constructed. The map spanned 3,140.9 cM with an average interval of 5.2 cM between two markers, approximately accounting for 70.6% of the cotton genome. Fifty-four of 60 linkage groups were ordered into 26 chromosomes. Multiple QTL mapping was used to identify QTL for fiber quality traits in five environments, and thirteen QTL were detected. These QTL included four for fiber length (FL), two for fiber strength (FS), two for fiber fineness (FF), three for fiber length uniformity (FU), and two for fiber elongation (FE), respectively. Each QTL explained between 7.4 and 43.1% of phenotypic variance. Five out of thirteen QTL (FL1 and FU1 on chromosome 6, FL2, FU2 and FF1 on chromosome7) were detected in five environments, and they explained more than 20% of the phenotypic variance. Eleven QTL were distributed on A genome, while the other two on D genome.     

四倍体栽培棉种产量和纤维品质性状的QTL定位

陆地棉和海岛棉是两个不同的四倍体栽培种 ,但在生产上各有其特点 ,陆地棉丰产性强 ,海岛棉纤维品质优良 ,利用其种间杂交群体定位产量和品质性状的QTL ,对于分子标记辅助的海岛棉优质纤维向陆地棉转移很有意义。以SSR和RAPD为分子标记 ,陆地棉与海岛棉杂种 (邯郸 2 0 8×Pima90 )F2 群体为作图群体 ,构建了一张含 12 6个标记的遗传图谱 ,包括 6 8个SSR标记和 5 8个RAPD标记 ,可分为 2 9个连锁群 ,标记间平均距离为 13 7cM ,总长1717 0cM ,覆盖棉花总基因组约 34 34% ;以遗传图 12 6个标记为基础 ,对F2 :3 家系符合正态分布的 10个农艺性状及纤维品质性状进行全基因组QTL扫描 ,结果发现 2 9个QTL分别与产量和品质性状有关。其中与衣指、籽指、皮棉产量、子棉产量、衣分等产量性状相关的QTL分别有 1、3、5、6和 1个 ,与纤维长度、整齐度、强度、伸长率和马克隆值等品质性状相关的QTL分别有 2、4、2、4和 1个。各QTL解释的变异量在 12 4 2 %～ 47 0 1%之间。其中比强度有关的 2个QTL能够解释的表型变异率分别为 34 15 %和 13 86 %。     

Mapping quantitative trait loci for lint yield and fiber quality across environments in a Gossypium hirsutum × Gossypium barbadense backcross inbred line population

Identification of stable quantitative trait loci (QTLs) across different environments and mapping populations is a prerequisite for marker-assisted selection (MAS) for cotton yield and fiber quality. To construct a genetic linkage map and to identify QTLs for fiber quality and yield traits, a backcross inbred line (BIL) population of 146 lines was developed from a cross between Upland cotton (Gossypium hirsutum) and Egyptian cotton (Gossypium barbadense) through two generations of backcrossing using Upland cotton as the recurrent parent followed by four generations of self pollination. The BIL population together with its two parents was tested in five environments representing three major cotton production regions in China. The genetic map spanned a total genetic distance of 2,895 cM and contained 392 polymorphic SSR loci with an average genetic distance of 7.4 cM per marker. A total of 67 QTLs including 28 for fiber quality and 39 for yield and its components were detected on 23 chromosomes, each of which explained 6.65–25.27 % of the phenotypic variation. Twenty-nine QTLs were located on the At subgenome originated from a cultivated diploid cotton, while 38 were on the Dt subgenome from an ancestor that does not produce spinnable fibers. Of the eight common QTLs (12 %) detected in more than two environments, two were for fiber quality traits including one for fiber strength and one for uniformity, and six for yield and its components including three for lint yield, one for seedcotton yield, one for lint percentage and one for boll weight. QTL clusters for the same traits or different traits were also identified. This research represents one of the first reports using a permanent advanced backcross inbred population of an interspecific hybrid population to identify QTLs for fiber quality and yield traits in cotton across diverse environments. It provides useful information for transferring desirable genes from G. barbadense to G. hirsutum using MAS.     

Quantitative trait loci mapping for yield and its components by using two immortalized populations of a heterotic hybrid in Gossypium hirsutum L.

Quantitative trait loci (QTL) mapping provides a powerful tool for unraveling the genetic basis of yield and yield components as well as heterosis in upland cotton. In this research, a molecular linkage map of Xiangzamian 2 (Gossypium hirsutum L.)-derived recombinant inbred lines (RILs) was reconstructed based on increased expressed sequence tag–simple sequence repeat markers. Both the RILs and immortalized F2s (IF2) developed through intermating between RILs were grown under multiple environments. Yield and yield components including seed-cotton yield, lint yield, bolls/plant, boll weight, lint percentage, seed index, lint index and fruit branch number were measured and their QTL were repeatedly identified across environments by the composite interval mapping (CIM) method. From a total of 111 non-redundant QTL, 23 were detected in both two populations. In the meantime, multi-marker joint analyses showed that 16 of these QTL had significant environmental interaction. QTL for correlated traits tended to be collocated and most of the QTL for seed-cotton yield and lint yield were associated with QTL for at least one yield component, consistent with the results observed in correlation analyses. For many QTL with significant additive effects, positive alleles from CRI12, the inferior parent with lower yield performance, were associated with trait improvement. Trait performance of IF2s and the large number of QTL with positive dominant effects implied that dominance plays an important role in the genetic basis of heterosis in Xiangzamian 2 and that non-additive inheritance is also an important genetic mode for lint percentage in the population. These QTL can provide the bases for marker-assisted breeding programs of upland cotton.     

QTL Mapping for Fiber and Yield Traits in Upland Cotton under Multiple Environments

A population of 178 recombinant inbred lines (RILs) was developed using a single seed descendant from a cross between G. hirsutum. acc DH962 and G. hirsutum. cv Jimian5, was used to construct a genetic map and to map QTL for fiber and yield traits. A total of 644 polymorphic loci were used to construct a final genetic map, containing 616 loci and spanning 2016.44 cM, with an average of 3.27 cM between adjacent markers. Statistical analysis revealed that segregation distortion in the intraspecific population was more serious than that in the interspecific population. The RIL population and the two parents were phenotyped under 8 environments (two locations, six years), revealing a total of 134 QTL, including 64 for fiber qualities and 70 for yield components, independently detected in seven environments, explaining 4.40–15.28% of phenotypic variation (PV). Among the 134 QTL, 9 common QTL were detected in more than one environment, and 22 QTL and 19 new QTL were detected in combined analysis (E9). A total of 26 QTL hotspot regions were observed on 13 chromosomes and 2 larger linkage groups, and some QTL clusters related to fiber qualities or yield components were also observed. The results obtained in the present study suggested that to map accurate QTL in crops with larger plant types, such as cotton, phenotyping under multiple environments is necessary to effectively apply the obtained results in molecular marker-assisted selection breeding and QTL cloning.     

Meta-analysis of quantitative trait loci for grain yield and component traits under reproductive-stage drought stress in an upland rice population

A recombinant inbred population developed from a cross between high-yielding lowland rice (Oryza sativa L.) subspecies indica cv. IR64 and upland tropical rice subspecies japonica cv. Cabacu was used to identify quantitative trait loci (QTLs) for grain yield (GY) and component traits under reproductive-stage drought stress. One hundred fifty-four lines were grown in field trials in Indonesia under aerobic conditions by giving surface irrigation to field capacity every 4 days. Water stress was imposed for a period of 15 days during pre-flowering by withholding irrigation at 65 days after seeding. Leaf rolling was scored at the end of the stress period and eight agronomic traits were evaluated after recovery. The population was also evaluated for root pulling force, and a total of 201 single nucleotide polymorphism markers were used to construct the molecular genetic linkage map and QTL mapping. A QTL for GY under drought stress was identified in a region close to the sd1 locus on chromosome 1. QTL meta-analysis across diverse populations showed that this QTL was conserved across genetic backgrounds and co-localized with QTLs for leaf rolling and osmotic adjustment (OA). A QTL for percent seed set and grains per panicle under drought stress was identified on chromosome 8 in the same region as a QTL for OA previously identified in three different populations.     

QTL mapping for fiber quality traits across multiple generations and environments in upland cotton

Identification of quantitative trait loci (QTL) for fiber quality traits that are stable across multiple generations and environments could facilitate marker-assisted selection for improving cotton strains. In the present study, F₂, F_2:3, and recombinant inbred lines (RILs, F _6:8 ) populations derived from an upland cotton (Gossypium hirsutum L.) cross between strain 0-153, which has excellent fiber quality, and strain sGK9708, a commercial transgenic cultivar, were constructed for QTL tagging of fiber quality. We used 5,742 simple sequence repeat primer pairs to screen for polymorphisms between the two parent strains. Linkage maps of F₂ and RILs were constructed, containing 155 and 190 loci and with a total map distance of 959.4 centimorgans (cM) and 700.9?cM, respectively. We screened fiber quality QTL across multiple generations and environments through composite interval mapping of fiber quality data. Specifically, we studied F₂ and F_2:3 family lines from Anyang (Henan Province) in 2003 and 2004 and RILs in Anyang in 2007 and Anyang, Quzhou (Hebei Province), and Linqing (Shandong Province) in 2008. We identified 50 QTL for fiber quality: 10 for fiber strength, 10 for fiber length, 10 for micronaire, eight for fiber uniformity, and 12 for fiber elongation. Nine of these fiber quality QTL were identified in F₂, F_2:3 and RILs simultaneously. Two QTL for fiber strength on chromosomes C7 and C25 were detected in all three generations and all four environments and explained 16.67?C27.86% and 9.43?C21.36% of the phenotypic variation, respectively. These stable QTL for fiber quality traits could be used for marker assisted selection.     

Variations and Transmission of QTL Alleles for Yield and Fiber Qualities in Upland Cotton Cultivars Developed in China

Cotton is the world’s leading cash crop, and genetic improvement of fiber yield and quality is the primary objective of cotton breeding program. In this study, we used various approaches to identify QTLs related to fiber yield and quality. Firstly, we constructed a four-way cross (4WC) mapping population with four base core cultivars, Stoneville 2B, Foster 6, Deltapine 15 and Zhongmiansuo No.7 (CRI 7), as parents in Chinese cotton breeding history and identified 83 QTLs for 11 agronomic and fiber quality traits. Secondly, association mapping of agronomical and fiber quality traits was based on 121 simple sequence repeat (SSR) markers using a general linear model (GLM). For this, 81 Gossypium hirsutum L. accessions including the four core parents and their derived cultivars were grown in seven diverse environments. Using these approaches, we successfully identified 180 QTLs significantly associated with agronomic and fiber quality traits. Among them were 66 QTLs that were identified via linkage disequilibrium (LD) and 4WC family-based linkage (FBL) mapping and by previously published family-based linkage (FBL) mapping in modern Chinese cotton cultivars. Twenty eight and 44 consistent QTLs were identified by 4WC and LD mapping, and by FBL and LD mapping methods, respectively. Furthermore, transmission and variation of QTL-alleles mapped by LD association in the three breeding periods revealed that some could be detected in almost all Chinese cotton cultivars, suggesting their stable transmission and some identified only in the four base cultivars and not in the modern cultivars, suggesting they were missed in conventional breeding. These results will be useful to conduct genomics-assisted breeding effectively using these existing and novel QTL alleles to improve yield and fiber qualities in cotton.     

海岛棉产量和早熟性相关性状的QTLs定位

对海岛棉产量和早熟性状进行QTL初步定位,为分子标记辅助育种提供依据。利用5200多对SSR引物筛选海岛棉品种新海3号和Giza82间的多态性引物,获得107对。以多态性引物检测新海3号×Giza82的190个F2:3家系,获得120个多态性位点。利用JoinMap3.0分析软件构建了一个包含22个连锁群,74个标记,标记间平均距离12.06 cM,全长893 cM,覆盖海岛棉基因组20.12%的分子标记遗传连锁图谱。采用复合区间作图法检测到21个与海岛棉产量性状和早熟性状有关的QTL,其中早熟性状检测到12个QTL,分别位于1、3、5、6、11、17、22共7个连锁群上;产量性状检测到9个QTL,分别位于1、4、5、6、7、16、22共7个连锁群上。研究结果为海岛棉产量性状和早熟性状的分子设计育种提供了有用的信息。     

High Resolution Consensus Mapping of Quantitative Trait Loci for Fiber Strength,Length and Micronaire on Chromosome 25 of the Upland Cotton (Gossypium hirsutum L.)

Cotton (Gossypium hirsutum L.) is an important agricultural crop that provides renewable natural fiber resources for the global textile industry. Technological developments in the textile industry and improvements in human living standards have increased the requirement for supplies and better quality cotton. Upland cotton 0–153 is an elite cultivar harboring strong fiber strength genes. To conduct quantitative trait locus (QTL) mapping for fiber quality in 0–153, we developed a population of 196 recombinant inbred lines (RILs) from a cross between 0–153 and sGK9708. The fiber quality traits in 11 environments were measured and a genetic linkage map of chromosome 25 comprising 210 loci was constructed using this RIL population, mainly using simple sequence repeat markers and single nucleotide polymorphism markers. QTLs were identified across diverse environments using the composite interval mapping method. A total of 37 QTLs for fiber quality traits were identified on chromosome 25, of which 17 were stably expressed in at least in two environments. A stable fiber strength QTL, qFS-chr25-4, which was detected in seven environments and was located in the marker interval between CRI-SNP120491 and BNL2572, could explain 6.53%–11.83% of the observed phenotypic variations. Meta-analysis also confirmed the above QTLs with previous reports. Application of these QTLs could contribute to improving fiber quality and provide information for marker-assisted selection.     

Interval mapping of QTLs controlling yield-related traits and seed protein content in Pisum sativum

A linkage map of garden pea was constructed on the basis of 114 plants (F2 generation) derived from a cross combination Wt10245 x Wt11238. The map, consisting of 204 morphological, isozyme, AFLP, ISSR, STS, CAPS and RAPD markers, was used for interval mapping of quantitative trait loci (QTLs) controlling seed number, pod number, 1000-seed weight, 1000-yield, and seed protein content. Characterization of each QTL included identification of QTL position with reference to the flanking markers, estimation of the part of variance explained by this QTL, and determination of its gene action. The yield-related traits were measured in F2 plants and in F4 recombinant inbred lines (RILs). The interval mapping revealed two to six QTLs per trait, demonstrating linkage to seven pea chromosomes. A total of 37 detected QTLs accounted for 9.1-55.9% of the trait's phenotypic variation and showed different types of gene action. As many as eight and ten QTLs influencing the analysed traits were mapped in linkage groups III and V, respectively, indicating an important role of these regions of the pea genome in the control of yield and seed protein content.     

Mapping of epistatic quantitative trait loci in four-way crosses

Four-way crosses (4WC) involving four different inbred lines often appear in plant and animal commercial breeding programs. Direct mapping of quantitative trait loci (QTL) in these commercial populations is both economical and practical. However, the existing statistical methods for mapping QTL in a 4WC population are built on the single-QTL genetic model. This simple genetic model fails to take into account QTL interactions, which play an important role in the genetic architecture of complex traits. In this paper, therefore, we attempted to develop a statistical method to detect epistatic QTL in 4WC population. Conditional probabilities of QTL genotypes, computed by the multi-point single locus method, were used to sample the genotypes of all putative QTL in the entire genome. The sampled genotypes were used to construct the design matrix for QTL effects. All QTL effects, including main and epistatic effects, were simultaneously estimated by the penalized maximum likelihood method. The proposed method was confirmed by a series of Monte Carlo simulation studies and real data analysis of cotton. The new method will provide novel tools for the genetic dissection of complex traits, construction of QTL networks, and analysis of heterosis.     

Characterization of variation and quantitative trait loci related to terpenoid indole alkaloid yield in a recombinant inbred line mapping population of <Emphasis Type="Italic">Catharanthus roseus</Emphasis>

Improved Catharanthus roseus cultivars are required for high yields of vinblastine, vindoline and catharanthine and/or serpentine and ajmalicine, the pharmaceutical terpenoid indole alkaloids. An approach to derive them is to map QTL for terpenoid indole alkaloids yields, identify DNA markers tightly linked to the QTL and apply marker assisted selection. Towards the end, 197 recombinant inbred lines from a cross were grown over two seasons to characterize variability for seven biomass and 23 terpenoid indole alkaloids content-traits and yield-traits. The recombinant inbred lines were genotyped for 178 DNA markers which formed a framework genetic map of eight linkage groups (LG), spanning 1786.5 cM, with 10.0 cM average intermarker distance. Estimates of correlations between traits allowed selection of seven relatively more important traits for terpenoid indole alkaloids yields. QTL analysis was performed on them using single marker (regression) analysis, simple interval mapping and composite interval mapping procedures. A total of 20 QTL were detected on five of eight LG, 10 for five traits on LG1, five for four traits on LG2, three for one trait on LG3 and one each for different traits on LG three and four. QTL for the same or different traits were found clustered on three LG. Co-location of two QTL for biomass traits was in accord of correlation between them. The QTL were validated for use in marker assisted selection by the recombinant inbred line which transgressively expressed 16 traits contributory to the yield vinblastine, vindoline and catharanthine from leaves and roots that possessed favourable alleles of 13 relevant QTL.     

玉米杂交种掖单13号的SSR连锁图谱构建与叶夹角和叶向值的QTL定位与分析

为了增加单位面积产量, 玉米育种者已经开始了更密植更紧凑株型的选育。叶夹角和叶向值是评价玉米株型的重要指标。本研究以掖478×丹340的500个F2单株为作图群体, 构建了具有138个位点的SSR标记连锁图谱, 图谱总长度为1 394.9 cM, 平均间距10.1 cM。利用397个F2：3家系对叶夹角和叶向值进行QTL定位分析, 结果表明: 叶夹角和叶向值分别检测到6和8个QTL, 累计解释表型变异41.0%和60.8%, 单个QTL的贡献率在2.9%~13.6%之间。与叶夹角和叶向值有关的基因主要作用方式为加性和部分显性。此外两个性状共检测到9对上位性互作位点, 表明上位性互作在叶夹角和叶向值的遗传中也起较重要的作用。     

Molecular diversity, genomic constitution, and QTL mapping of fiber quality by mapped SSRs in introgression lines derived from Gossypium hirsutum?×?G. darwinii Watt

Because the genetic basis of current upland cotton cultivars is narrow, exploring new germplasm resources and discovering novel alleles relevant to important agronomic traits have become two of the most important themes in the field of cotton research. In this study, G. darwinii Watt, a wild cotton species, was crossed with four upland cotton cultivars with desirable traits. A total of 105 introgression lines (ILs) were successfully obtained. By using 310 mapped SSRs evenly distributed across the interspecific linkage map of G. hirsutum?×?G. barbadense, these 105 ILs and their corresponding parents were analyzed. A total of 278 polymorphic loci were detected among the 105 ILs, and the average length of introgression segments accumulated to 333.5?cM, accounting for 6.7?% of the whole genome. These lines included many variations. However, high similarity coefficients existed between lines, even between those derived from different parents. Finally, all the ILs and their upland cotton parents were used for association mapping of fiber quality in three environments. A total of 40 SSRs were found to be associated with five fiber quality indexes (P?相似文献   

Genome‐wide quantitative trait loci reveal the genetic basis of cotton fibre quality and yield‐related traits in a Gossypium hirsutum recombinant inbred line population

Cotton is widely cultivated globally because it provides natural fibre for the textile industry and human use. To identify quantitative trait loci (QTLs)/genes associated with fibre quality and yield, a recombinant inbred line (RIL) population was developed in upland cotton. A consensus map covering the whole genome was constructed with three types of markers (8295 markers, 5197.17 centimorgans (cM)). Six fibre yield and quality traits were evaluated in 17 environments, and 983 QTLs were identified, 198 of which were stable and mainly distributed on chromosomes 4, 6, 7, 13, 21 and 25. Thirty‐seven QTL clusters were identified, in which 92.8% of paired traits with significant medium or high positive correlations had the same QTL additive effect directions, and all of the paired traits with significant medium or high negative correlations had opposite additive effect directions. In total, 1297 genes were discovered in the QTL clusters, 414 of which were expressed in two RNA‐Seq data sets. Many genes were discovered, 23 of which were promising candidates. Six important QTL clusters that included both fibre quality and yield traits were identified with opposite additive effect directions, and those on chromosome 13 (qClu‐chr13‐2) could increase fibre quality but reduce yield; this result was validated in a natural population using three markers. These data could provide information about the genetic basis of cotton fibre quality and yield and help cotton breeders to improve fibre quality and yield simultaneously.     

Genetic basis of drought resistance at reproductive stage in rice: separation of drought tolerance from drought avoidance

Drought tolerance (DT) and drought avoidance (DA) are two major mechanisms in drought resistance of higher plants. In this study, the genetic bases of DT and DA at reproductive stage in rice were analyzed using a recombinant inbred line population from a cross between an indica lowland and a tropical japonica upland cultivar. The plants were grown individually in PVC pipes and two cycles of drought stress were applied to individual plants with unstressed plants as the control. A total of 21 traits measuring fitness, yield, and the root system were investigated. Little correlation of relative yield traits with potential yield, plant size, and root traits was detected, suggesting that DT and DA were well separated in the experiment. A genetic linkage map consisting of 245 SSR markers was constructed for mapping QTL for these traits. A total of 27 QTL were resolved for 7 traits of relative performance of fitness and yield, 36 QTL for 5 root traits under control, and 38 for 7 root traits under drought stress conditions, suggesting the complexity of the genetic bases of both DT and DA. Only a small portion of QTL for fitness- and yield-related traits overlapped with QTL for root traits, indicating that DT and DA had distinct genetic bases.     

大白菜部分形态性状的QTL定位与分析

应用352个标记位点的大白菜AFLP和RAPD图谱和一套栽培品种间杂交获得的重组自交系群体,采用复合区间作图的方法对大白菜9个形态性状进行QTL定位及遗传效应研究。在14个连锁群上检测到50个QTL:其中控制株型的QTL有5个;控制株高的QTL有6个;控制开展度的QTL有5个;控制最大叶长的QTL有7个;控制最大叶宽的QTL有4个;控制叶形指数的QTL有6个;控制中肋长的QTL有7个;控制中肋宽的QTL有4个;控制抽苔的QTL有6个。另外,估算了单个QTL的遗传贡献率和加性效应。这将为大白菜品种改良中形态性状的分子标记辅助选择提供理论依据。     

A BIL Population Derived from G. hirsutum and G. barbadense Provides a Resource for Cotton Genetics and Breeding

To provide a resource for cotton genetics and breeding, an interspecific hybridization between Gossypium hirsutum cv. Emian22 and G. barbadense acc. 3–79 was made. A population of 54 BILs (backcross inbred lines, BC₁F₈) was developed with the aim of transferring G. barbadense genes into G. hirsutum in order to genetically analyze these genes’ function in a G. hirsutum background and create new germplasms for breeding. Preliminary investigation of the morphological traits showed that the BILs had diverse variations in plant architecture, seed size, and fuzz color; the related traits of yield and fiber quality evaluated in 4 environments also showed abundant phenotypic variation. In order to explore the molecular diversity of the BIL population, 446 SSR markers selected at an average genetic distance of 10 cM from our interspecific linkage map were used to genotype the BIL population. A total of 393 polymorphic loci accounting for 84.4% MAF (major allele frequency) > 0.05 and 922 allele loci were detected, and the Shannon diversity index (I) was 0.417 per locus. The average introgression segment length was 16.24 cM, and an average of 29.53 segments were introgressed in each BIL line with an average background recovery of 79.8%. QTL mapping revealed 58 QTL associated with fiber quality and yield traits, and 47 favored alleles derived from the donor parent were discovered. This study demonstrated that the interspecific BIL population was enriched with much phenotypic and molecular variation which could be a resource for cotton genetics and breeding.