QTL mapping of yield and fiber traits based on a four-way cross population in <Emphasis Type="Italic">Gossypium hirsutum</Emphasis> L.

Four-way cross (4WC) involving four different inbred lines frequently appears in the cotton breeding programs. However, linkage analysis and quantitative trait loci (QTL) mapping with molecular markers in cotton has largely been applied to populations derived from a cross between two inbred lines, and few results of QTL dissection were conducted in a 4WC population. In this study, an attempt was made to construct a linkage map and identify QTL for yield and fiber quality traits in 4WC derived from four different inbred lines in Gossypium hirsutum L. A linkage map was constructed with 285 SSR loci and one morphological locus, covering 2113.3 cM, approximately 42% of the total recombination length of the cotton genome. A total of 31 QTL with 5.1–25.8% of the total phenotypic variance explained were detected. Twenty-four common QTL across environments showed high stability, and six QTL were environment-specific. Several genomic segments affecting multiple traits were identified. The advantage of QTL mapping using a 4WC were discussed. This study presents the first example of QTL mapping using a 4WC population in upland cotton. The results presented here will enhance the understanding of the genetic basis of yield and fiber quality traits and enable further marker-assisted selection in cultivar populations in upland cotton.     

Identification of Associated SSR Markers for Yield Component and Fiber Quality Traits Based on Frame Map and Upland Cotton Collections

Detecting QTLs (quantitative trait loci) that enhance cotton yield and fiber quality traits and accelerate breeding has been the focus of many cotton breeders. In the present study, 359 SSR (simple sequence repeat) markers were used for the association mapping of 241 Upland cotton collections. A total of 333 markers, representing 733 polymorphic loci, were detected. The average linkage disequilibrium (LD) decay distances were 8.58 cM (r² > 0.1) and 5.76 cM (r² > 0.2). 241 collections were arranged into two subgroups using STRUCTURE software. Mixed linear modeling (MLM) methods (with population structure (Q) and relative kinship matrix (K)) were applied to analyze four phenotypic datasets obtained from four environments (two different locations and two years). Forty-six markers associated with the number of bolls per plant (NB), boll weight (BW), lint percentage (LP), fiber length (FL), fiber strength (FS) and fiber micornaire value (FM) were repeatedly detected in at least two environments. Of 46 associated markers, 32 were identified as new association markers, and 14 had been previously reported in the literature. Nine association markers were near QTLs (at a distance of less than 1–2 LD decay on the reference map) that had been previously described. These results provide new useful markers for marker-assisted selection in breeding programs and new insights for understanding the genetic basis of Upland cotton yields and fiber quality traits at the whole-genome level.     

Mapping quantitative trait loci for lint yield and fiber quality across environments in a Gossypium hirsutum × Gossypium barbadense backcross inbred line population

Identification of stable quantitative trait loci (QTLs) across different environments and mapping populations is a prerequisite for marker-assisted selection (MAS) for cotton yield and fiber quality. To construct a genetic linkage map and to identify QTLs for fiber quality and yield traits, a backcross inbred line (BIL) population of 146 lines was developed from a cross between Upland cotton (Gossypium hirsutum) and Egyptian cotton (Gossypium barbadense) through two generations of backcrossing using Upland cotton as the recurrent parent followed by four generations of self pollination. The BIL population together with its two parents was tested in five environments representing three major cotton production regions in China. The genetic map spanned a total genetic distance of 2,895 cM and contained 392 polymorphic SSR loci with an average genetic distance of 7.4 cM per marker. A total of 67 QTLs including 28 for fiber quality and 39 for yield and its components were detected on 23 chromosomes, each of which explained 6.65–25.27 % of the phenotypic variation. Twenty-nine QTLs were located on the At subgenome originated from a cultivated diploid cotton, while 38 were on the Dt subgenome from an ancestor that does not produce spinnable fibers. Of the eight common QTLs (12 %) detected in more than two environments, two were for fiber quality traits including one for fiber strength and one for uniformity, and six for yield and its components including three for lint yield, one for seedcotton yield, one for lint percentage and one for boll weight. QTL clusters for the same traits or different traits were also identified. This research represents one of the first reports using a permanent advanced backcross inbred population of an interspecific hybrid population to identify QTLs for fiber quality and yield traits in cotton across diverse environments. It provides useful information for transferring desirable genes from G. barbadense to G. hirsutum using MAS.     

Favorable QTL Alleles for Yield and Its Components Identified by Association Mapping in Chinese Upland Cotton Cultivars

Linkage disequilibrium based association mapping is a powerful tool for dissecting the genetic basis underlying complex traits. In this study, an association mapping panel consisting of 356 representative Upland cotton cultivars was constructed, evaluated in three environments and genotyped using 381 SSRs to detect molecular markers associated with lint yield and its components. The results showed that abundant phenotypic and moderate genetic diversities existed within this germplasm panel. The population could be divided into two subpopulations, and weak relatedness was detected between pair-wise accessions. LD decayed to the background (r ² = 0.1182, P≤0.01), r ² = 0.1 and r ² = 0.2 level within 12–13 cM, 17–18 cM and 3–4 cM, respectively, providing the potential for association mapping of agronomically important traits in Chinese Upland cotton. A total of 55 marker-trait associations were detected between 26 SSRs and seven lint yield traits, based on a mixed linear model (MLM) and Bonferroni correction (P≤0.05/145, −log₁₀ P≥3.46). Of which 41 could be detected in more than one environment and 17 markers were simultaneously associated with two or more traits. Many associations were consistent with QTLs identified by linkage mapping in previous reports. Phenotypic values of alleles of each loci in 41 stably detected associations were compared, and 23 favorable alleles were identified. Population frequency of each favorable allele in historically released cultivar groups was also evaluated. The QTLs detected in this study will be helpful in further understanding the genetic basis of lint yield and its components, and the favorable alleles may facilitate future high-yield breeding by genomic selection in Upland cotton.     

Linkage and Association Mapping for Two Major Traits Used in the Maritime Pine Breeding Program: Height Growth and Stem Straightness

BackgroundIncreasing our understanding of the genetic architecture of complex traits, through analyses of genotype-phenotype associations and of the genes/polymorphisms accounting for trait variation, is crucial, to improve the integration of molecular markers into forest tree breeding. In this study, two full-sib families and one breeding population of maritime pine were used to identify quantitative trait loci (QTLs) for height growth and stem straightness, through linkage analysis (LA) and linkage disequilibrium (LD) mapping approaches.ResultsThe populations used for LA consisted of two unrelated three-generation full-sib families (n = 197 and n = 477). These populations were assessed for height growth or stem straightness and genotyped for 248 and 217 markers, respectively. The population used for LD mapping consisted of 661 founders of the first and second generations of the breeding program. This population was phenotyped for the same traits and genotyped for 2,498 single-nucleotide polymorphism (SNP) markers corresponding to 1,652 gene loci. The gene-based reference genetic map of maritime pine was used to localize and compare the QTLs detected by the two approaches, for both traits. LA identified three QTLs for stem straightness and two QTLs for height growth. The LD study yielded seven significant associations (P ≤ 0.001): four for stem straightness and three for height growth. No colocalisation was found between QTLs identified by LA and SNPs detected by LD mapping for the same trait.ConclusionsThis study provides the first comparison of LA and LD mapping approaches in maritime pine, highlighting the complementary nature of these two approaches for deciphering the genetic architecture of two mandatory traits of the breeding program.     

Genetic mapping and quantitative trait locus analysis of fiber quality traits using a three-parent composite population in upland cotton (Gossypium hirsutum L.)

Composite cross populations (CP) developed from three or more cultivars/lines are frequently used to improve agronomic and economic traits in crop cultivar development programs. Employing CP in linkage map construction and quantitative trait locus (QTL) mapping may increase the marker density of upland cotton (Gossypium hirsutum L.) genetic maps, exploit more adequate gene resources and facilitate marker-assisted selection (MAS). To construct a relatively high-density map and identify QTL associated with fiber quality traits in upland cotton, three elite upland cultivars/lines, Yumian 1, CRI 35 and 7,235, were used to obtain the segregating population, Yumian 1/CRI 35//Yumian 1/7,235. A genetic map containing 978 simple sequence repeat (SSR) loci and 69 linkage groups was constructed; the map spanned 4,184.4 cM, covering approximately 94.1% of the entire tetraploid cotton genome. A total of 63 QTL were detected, explaining 8.1–55.8% of the total phenotypic variance: 11 QTL for fiber elongation, 16 QTL for fiber length, 9 QTL for fiber micronaire reading, 10 QTL for fiber strength and 17 QTL for fiber length uniformity. The genetic map and QTL detected for fiber quality traits are promising for further breeding programs of upland cotton with improved fiber quality.     

四倍体栽培棉种产量和纤维品质性状的QTL定位

陆地棉和海岛棉是两个不同的四倍体栽培种 ,但在生产上各有其特点 ,陆地棉丰产性强 ,海岛棉纤维品质优良 ,利用其种间杂交群体定位产量和品质性状的QTL ,对于分子标记辅助的海岛棉优质纤维向陆地棉转移很有意义。以SSR和RAPD为分子标记 ,陆地棉与海岛棉杂种 (邯郸 2 0 8×Pima90 )F2 群体为作图群体 ,构建了一张含 12 6个标记的遗传图谱 ,包括 6 8个SSR标记和 5 8个RAPD标记 ,可分为 2 9个连锁群 ,标记间平均距离为 13 7cM ,总长1717 0cM ,覆盖棉花总基因组约 34 34% ;以遗传图 12 6个标记为基础 ,对F2 :3 家系符合正态分布的 10个农艺性状及纤维品质性状进行全基因组QTL扫描 ,结果发现 2 9个QTL分别与产量和品质性状有关。其中与衣指、籽指、皮棉产量、子棉产量、衣分等产量性状相关的QTL分别有 1、3、5、6和 1个 ,与纤维长度、整齐度、强度、伸长率和马克隆值等品质性状相关的QTL分别有 2、4、2、4和 1个。各QTL解释的变异量在 12 4 2 %～ 47 0 1%之间。其中比强度有关的 2个QTL能够解释的表型变异率分别为 34 15 %和 13 86 %。     

Quantitative trait loci analysis of fiber quality traits using a random-mated recombinant inbred population in Upland cotton (Gossypium hirsutum L.)

Background

Upland cotton (Gossypium hirsutum L.) accounts for about 95% of world cotton production. Improving Upland cotton cultivars has been the focus of world-wide cotton breeding programs. Negative correlation between yield and fiber quality is an obstacle for cotton improvement. Random-mating provides a potential methodology to break this correlation. The suite of fiber quality traits that affect the yarn quality includes the length, strength, maturity, fineness, elongation, uniformity and color. Identification of stable fiber quantitative trait loci (QTL) in Upland cotton is essential in order to improve cotton cultivars with superior quality using marker-assisted selection (MAS) strategy.

Results

Using 11 diverse Upland cotton cultivars as parents, a random-mated recombinant inbred (RI) population consisting of 550 RI lines was developed after 6 cycles of random-mating and 6 generations of self-pollination. The 550 RILs were planted in triplicates for two years in Mississippi State, MS, USA to obtain fiber quality data. After screening 15538 simple sequence repeat (SSR) markers, 2132 were polymorphic among the 11 parents. One thousand five hundred eighty-two markers covering 83% of cotton genome were used to genotype 275 RILs (Set 1). The marker-trait associations were analyzed using the software program TASSEL. At p < 0.01, 131 fiber QTLs and 37 QTL clusters were identified. These QTLs were responsible for the combined phenotypic variance ranging from 62.3% for short fiber content to 82.8% for elongation. The other 275 RILs (Set 2) were analyzed using a subset of 270 SSR markers, and the QTLs were confirmed. Two major QTL clusters were observed on chromosomes 7 and 16. Comparison of these 131 QTLs with the previously published QTLs indicated that 77 were identified before, and 54 appeared novel.

Conclusions

The 11 parents used in this study represent a diverse genetic pool of the US cultivated cotton, and 10 of them were elite commercial cultivars. The fiber QTLs, especially QTL clusters reported herein can be readily implemented in a cotton breeding program to improve fiber quality via MAS strategy. The consensus QTL regions warrant further investigation to better understand the genetics and molecular mechanisms underlying fiber development.

Electronic supplementary material

The online version of this article (doi:10.1186/1471-2164-15-397) contains supplementary material, which is available to authorized users.     

Identification of QTLs for seed and pod traits in soybean and analysis for additive effects and epistatic effects of QTLs among multiple environments

Soybean seed and pod traits are important yield components. Selection for high yield style in seed and pod along with agronomic traits is a goal of many soybean breeders. The intention of this study was to identify quantitative trait loci (QTL) underlying seed and pod traits in soybean among eleven environments in China. 147 recombinant inbred lines were advanced through single-seed-descent method. The population was derived from a cross between Charleston (an American high yield soybean cultivar) and DongNong594 (a Chinese high yield soybean cultivar). A total of 157 polymorphic simple sequence repeat markers were used to construct a genetic linkage map. The phenotypic data of seed and pod traits [number of one-seed pod, number of two-seed pod, number of three-seed pod, number of four-seed pod, number of (two plus three)-seed pod, number of (three plus four)-seed pod, seed weight per plant, number of pod per plant] were recorded in eleven environments. In the analysis of single environment, fourteen main effect QTLs were identified. In the conjoint analysis of multiple environments, twenty-four additive QTLs were identified, and additive QTLs by environments interactions (AE) were evaluated and analyzed at the same time among eleven environments; twenty-three pairs of epistatic QTLs were identified, and epistasis (additive by additive) by environments interactions (AAE) were also analyzed and evaluated among eleven environments. Comparing the results of identification between single environment mapping and multiple environments conjoint mapping, three main effect QTLs with positive additive values and another three main effect QTLs with negative additive values, had no interactions with all environments, supported that these QTLs could be used in molecular assistant breeding in the future. These different effect QTLs could supply a good foundation to the gene clone and molecular asisstant breeding of soybean seed and pod traits.     

Chromosomal assignment of RFLP linkage groups harboring important QTLs on an intraspecific cotton (Gossypium hirsutum L.) Joinmap

Chromosome identities were assigned to 15 linkage groups of the RFLP joinmap developed from four intraspecific cotton (Gossypium hirsutum L.) populations with different genetic backgrounds (Acala, Delta, and Texas Plains). The linkage groups were assigned to chromosomes by deficiency analysis of probes in the previously published joinmap, based on genomic DNA from hypoaneuploid chromosome substitution lines. These findings were integrated with QTL identification for multiple fiber and yield traits. Overall results revealed the presence of 63 QTLs on five different chromosomes of the A subgenome (chromosomes-03, -07, -09, -10, and -12) and 29 QTLs on the three different D subgenome (chromosomes-14 Lo, -20, and the long arm of -26). Linkage group-1 (chromosome-03) harbored 26 QTLs, covering 117 cM with 54 RFLP loci. Linkage group-2, (the long arm of chromosome-26) harbored 19 QTLs, covering 77.6 cM with 27 RFLP loci. Approximately 49% of the putative 92 QTLs for agronomic and fiber quality traits were placed on the above two major joinmap linkage groups, which correspond to just two different chromosomes, indicating that cotton chromosomes may have islands of high and low meiotic recombination like some other eukaryotic organisms. In addition, it reveals highly recombined and putative gene abundant regions in the cotton genome. QTLs for fiber quality traits in certain regions are located between two RFLP markers with an average of less than one cM (approximately 0.4-0.6 Mb) and possibly represent targets for map-based cloning. Identification of chromosomal location of RFLP markers common to different intra- and interspecific-populations will facilitate development of portable framework markers, as well as genetic and physical mapping of the cotton genome.     

Molecular diversity, genomic constitution, and QTL mapping of fiber quality by mapped SSRs in introgression lines derived from Gossypium hirsutum?×?G. darwinii Watt

Because the genetic basis of current upland cotton cultivars is narrow, exploring new germplasm resources and discovering novel alleles relevant to important agronomic traits have become two of the most important themes in the field of cotton research. In this study, G. darwinii Watt, a wild cotton species, was crossed with four upland cotton cultivars with desirable traits. A total of 105 introgression lines (ILs) were successfully obtained. By using 310 mapped SSRs evenly distributed across the interspecific linkage map of G. hirsutum?×?G. barbadense, these 105 ILs and their corresponding parents were analyzed. A total of 278 polymorphic loci were detected among the 105 ILs, and the average length of introgression segments accumulated to 333.5?cM, accounting for 6.7?% of the whole genome. These lines included many variations. However, high similarity coefficients existed between lines, even between those derived from different parents. Finally, all the ILs and their upland cotton parents were used for association mapping of fiber quality in three environments. A total of 40 SSRs were found to be associated with five fiber quality indexes (P?相似文献   

Genetic dissection of the introgressive genomic components from Gossypium barbadense L. that contribute to improved fiber quality in Gossypium hirsutum L.

We crossed Luyuan343, containing the Gossypium barbadense (GB) genomic component, with Lumianyan22, a high-yielding Gossypium hirsutum (GH) variety, to evaluate the introgressive exogenous genomic components that contribute to fiber quality in upland cotton. A total of 158 of 334 mapping simple sequence repeats (SSR) loci screened from 18,467 SSR primer pairs were identified as putative GB introgression loci. Twenty-four quantitative trait loci (QTLs) for fiber quality and lint percentage were detected by WinQTLCart 2.5 based on three phenotypic datasets collected over 2 years in two different locations. Of these QTLs, 20 were mapped in the introgression chromosomal regions; the GB alleles contributed to improved fiber quality at eight loci, which were located in the introgression segments of chromosome (Chr.) 3, Chr.7 and Chr.25. A total of eight digenic epistasis and nine significant QTL × environment (QE) interactions were identified by QTLNetwork-2.2. Fiber elongation was found to be most easily influenced by environment since all QTLs for this trait showed significant QE interaction with large effects. Fiber length, fiber strength, and lint percentage were scarcely affected by environment as no or minor QE interaction effects for these traits were detected. Genome-wide identification of the introgressive GB components and mapping of the fiber-related QTLs indentified in this study will be beneficial for the simultaneous marker-assistant selection of improved fiber quality and lint yield in upland cotton breeding.     

Quantitative trait loci for yield and related traits in the wheat population Ning7840 × Clark

Grain yield and associated agronomic traits are important factors in wheat (Triticum aestivum L.) improvement. Knowledge regarding the number, genomic location, and effect of quantitative trait loci (QTL) would facilitate marker-assisted selection and the development of cultivars with desirable characteristics. Our objectives were to identify QTLs directly and indirectly affecting grain yield expression. A population of 132 F₁₂ recombinant inbred lines (RILs) was derived by single-seed descent from a cross between the Chinese facultative wheat Ning7840 and the US soft red winter wheat Clark. Phenotypic data were collected for 15 yield and other agronomic traits in the RILs and parental lines from three locations in Oklahoma from 2001 to 2003. Twenty-nine linkage groups, consisting of 363 AFLP and 47 SSR markers, were identified. Using composite interval mapping (CIM) analysis, 10, 16, 30, and 14 QTLs were detected for yield, yield components, plant adaptation (shattering and lodging resistance, heading date, and plant height), and spike morphology traits, respectively. The QTL effects ranged from 7 to 23%. Marker alleles from Clark were associated with a positive effect for the majority of QTLs for yield and yield components, but gene dispersion was the rule rather than the exception for this RIL population. Often, QTLs were detected in proximal positions for different traits. Consistent, co-localized QTLs were identified in linkage groups 1AL, 1B, 4B, 5A, 6A, and 7A, and less consistent but unique QTLs were identified on 2BL, 2BS, 2DL, and 6B. Results of this study provide a benchmark for future efforts on QTL identification for yield traits.     

Improving the quality of African robustas: QTLs for yield- and quality-related traits in Coffea canephora

Coffea canephora breeding requires combining sustainable productivity with improved technological and cup quality characteristics. Beverage quality is a complex and subjective trait, and breeding for this trait is time consuming and depends on knowledge of the genetics of its components. A highly variable C. canephora progeny resulting from an intraspecific cross was assessed for 63 traits over 5?years. To identify quantitative trait loci (QTLs) controlling agronomic, technological, and quality-related traits, a genetic map comprising 236 molecular markers was constructed, and composite interval mapping was performed. Beverage quality was evaluated in relation to biochemical and cup tasting traits. QTLs were identified for almost half of the traits evaluated, with effects ranging from 6% to 80% of phenotypic variation. Most of them present a consistent detection over years. The strongest QTLs explained a high percentage of the variation for yield in 2006 (34% to 57%), bean size (25% to 35%), content of chlorogenic acids (22% to 35%), sucrose and trigonelline content (29% to 81%), and acidity and bitterness of coffee beverages (30% to 55%). Regions of the C. canephora genome influencing beverage quality were identified. Five QTL zones were co-localized with candidate genes related to the biosynthesis of the analyzed traits: two genes coding for caffeine biosynthesis, one gene implicated in the biosynthesis of chlorogenic acids, and two genes implicated in sugar metabolism. This is one of the first studies on the identification of QTLs combining agronomic and quality traits in coffee. The high variability of quality traits within C. canephora and the presence of consistent QTLs offer breeders a promising tool to improve coffee cup quality.     

SSR marker-assisted improvement of fiber qualities in Gossypium hirsutum using G. barbadense introgression lines

Key message

This study demonstrates the first practical use of CSILs for the transfer of fiber quality QTLs into Upland cotton cultivars using SSR markers without detrimentally affecting desirable agronomic characteristics.

Abstract

Gossypium hirsutum is characterized by its high lint production and medium fiber quality compared to extra-long staple cotton G. barbadense. Transferring valuable traits or genes from G. barbadense into G. hirsutum is a promising but challenging approach through a traditional interspecific introgression strategy. We developed one set of chromosome segment introgression lines (CSILs), where TM-1, the genetic standard in G. hirsutum, was used as the recipient parent and the long staple cotton G. barbadense cv. Hai7124 was used as the donor parent by molecular marker-assisted selection (MAS). Among them, four CSILs, IL040-A4-1, IL080-D6-1, IL088-A7-3 and IL019-A2-6, found to be associated with superior fiber qualities including fiber length, strength and fineness QTL in Xinjiang were selected and backcrossed, and transferred these QTLs into three commercial Upland cotton cultivars such as Xinluzao (XLZ) 26, 41 and 42 grown in Xinjiang. By backcrossing and self-pollinating twice, five improved lines (3262-4, 3389-2, 3326-3, 3380-4 and 3426-5) were developed by MAS of background and introgressed segments. In diverse field trials, these QTLs consistently and significantly offered additive effects on the target phenotype. Furthermore, we also pyramided two segments from different CSILs (IL080-D6-1 and IL019-A2-6) into cultivar 0768 to accelerate breeding process purposefully with MAS. The improved lines pyramided by these two introgressed segments showed significant additive epistatic effects in four separate field trials. No significant alteration in yield components was observed in these modified lines. In summary, we first report that these CSILs have great potential to improve fiber qualities in Upland cotton MAS breeding programs.     

High Resolution Consensus Mapping of Quantitative Trait Loci for Fiber Strength,Length and Micronaire on Chromosome 25 of the Upland Cotton (Gossypium hirsutum L.)

Cotton (Gossypium hirsutum L.) is an important agricultural crop that provides renewable natural fiber resources for the global textile industry. Technological developments in the textile industry and improvements in human living standards have increased the requirement for supplies and better quality cotton. Upland cotton 0–153 is an elite cultivar harboring strong fiber strength genes. To conduct quantitative trait locus (QTL) mapping for fiber quality in 0–153, we developed a population of 196 recombinant inbred lines (RILs) from a cross between 0–153 and sGK9708. The fiber quality traits in 11 environments were measured and a genetic linkage map of chromosome 25 comprising 210 loci was constructed using this RIL population, mainly using simple sequence repeat markers and single nucleotide polymorphism markers. QTLs were identified across diverse environments using the composite interval mapping method. A total of 37 QTLs for fiber quality traits were identified on chromosome 25, of which 17 were stably expressed in at least in two environments. A stable fiber strength QTL, qFS-chr25-4, which was detected in seven environments and was located in the marker interval between CRI-SNP120491 and BNL2572, could explain 6.53%–11.83% of the observed phenotypic variations. Meta-analysis also confirmed the above QTLs with previous reports. Application of these QTLs could contribute to improving fiber quality and provide information for marker-assisted selection.     

QTL mapping of yield, agronomic and quality traits in tetraploid potato (Solanum tuberosum subsp. tuberosum)

Interval mapping of quantitative trait loci (QTL) for 16 yield, agronomic and quality traits in potato was performed on a tetraploid full-sib family comprising 227 clones from a cross between processing clone 12601ab1 and table cultivar Stirling. Thirty-eight AFLP primer combinations and six SSRs provided 514 informative markers which formed a molecular marker map comprising 12 linkage groups (LGs) in 12601ab1 (nine with four homologous chromosomes) which were aligned with 12 in Stirling (11 with four homologous chromosomes), with four partial groups remaining in 12601ab1. Two LGs were identified unequivocally as chromosomes IV and V and eight others were tentatively assigned with chromosomes VII and X unidentified. All of the traits scored had moderately high heritabilities with 54–92% of the variation in clone means over 3 years and two replicates being due to genetic differences. A total of 39 QTLs were identified. A QTL for maturity was identified on chromosome V which explained 56% of the phenotypic variance, whereas the other QTLs individually explained between 5.4 and 16.5%. However, six QTLs were detected for after-cooking blackening and four for each of regularity of tuber shape, fry colour both after storage at 4 and 10°C and sprouting. Just two QTLs were found for each of yield, the two ‘overall’ scores, crop emergence, tuber size and common scab and just one QTL was detected for each of dry matter content, keeping quality, growth cracks and internal condition. The implications for practical potato breeding and for practical linkage and QTL analysis in autotetraploids are discussed.     

大豆重要农艺性状的QTL分析

应用栽培大豆科丰1号（♀）和南农1138-2（♂）杂交得到的F9代重组自交系（RILs）群体（201个家系）,构建了含302遗传标记、覆盖2363.8cM、由22个连锁群组成的遗传连锁图谱。采用区间作图法,对该群体的主要农艺性状的调查数据进行QTL分析,表明与开花期、成熟期、株高、主茎节数、每节荚数、倒状性、种子重、产量、蛋白质和含油量等10个重要农艺性状连锁的QTL位点34个,每个数量性状的遗传变异是由多个QTL位点决定的。与产量有关的农艺性状的一些QTL集中在几个连锁群上。     

Genome-wide association mapping of yield components and drought tolerance-related traits in cotton

Drought causes serious yield losses in cotton production throughout the world. Association mapping allows identification and localization of the genes controlling drought-related traits which will be helpful in cotton breeding. In the present study, genetic diversity analysis and association mapping of yield and drought traits were performed on a panel of 99 upland cotton genotypes using 177 SSR (simple sequence repeat) markers. Yield parameters and drought tolerance-related traits were evaluated for two seasons under two watering regimes: water-stressed and well-watered. The traits included seed cotton yield (SCY), lint yield (LY), lint percentage (LP), water-use efficiency (WUE), yield potential (YP), yield reduction (YR), yield index (YI), drought sensitivity index (DSI), stress tolerance index (STI), harmonic mean (HM), and geometric mean productivity (GMP). The genotypes with the least change in seed cotton yield under drought stress were Zeta 2, Delcerro, Nazilli 87, and DAK 66/3 which were also the most water-use efficient cultivars. The average genetic diversity of the panel was 0.38. The linkage disequilibrium decayed relatively rapidly at 20–30 cM (r²?≥?0.5). We identified 30 different SSR markers associated with the traits. Fifteen and 23 SSR markers were linked to the traits under well-watered and water-stress conditions, respectively. To our knowledge, most of these quantitative yield and drought tolerance-associated loci were newly identified. The genetic diversity and association mapping results should facilitate the development of drought-tolerant cotton lines with high yield in molecular breeding programs.     

Quantitative trait loci for agronomic traits in an elite barley population for Mediterranean conditions

Advances in plant breeding through marker-assisted selection (MAS) are only possible when genes or quantitative trait loci (QTLs) can contribute to the improvement of elite germplasm. A population of recombinant inbred lines (RILs) was developed for one of the best crosses of the Spanish National Barley Breeding Program, between two six-row winter barley cultivars Orria and Plaisant. The objective of this study was to identify favourable QTLs for agronomic traits in this population, which may help to optimise breeding strategies for these and other elite materials for the Mediterranean region. A genetic linkage map was developed for 217 RILs, using 382 single nucleotide polymorphism markers, selected from the barley oligonucleotide pool assay BOPA1 and two genes. A subset of 112 RILs was evaluated for several agronomic traits over a period of 2 years at three locations, Lleida and Zaragoza (Spain) and Fiorenzuola d’Arda (Italy), for a total of five field trials. An important segregation distortion occurred during population development in the region surrounding the VrnH1 locus. A QTL for grain yield and length of growth cycle was also found at this locus, apparently linked to a differential response of the VrnH1 alleles to temperature. A total of 33 QTLs was detected, most of them for important breeding targets such as plant height and thousand-grain weight. QTL × environment interactions were prevalent for most of the QTLs detected, although most interactions were of a quantitative nature. Therefore, QTLs suitable for MAS for most traits were identified.