脊髓灰质炎病毒C3表位和C-myc十肽表位在细菌表面的表达

为了进一步验证载体pCSB136和pCSX72作为表面呈现载体的可行性 ,化学合成脊髓灰质炎病毒C3表位和C myc十肽表位的基因片段 ,并插入到上述载体的相应位点间 ,采用全菌PCR筛选到正向插入的重组子 ,全细胞ELISA和电镜观察显示 ,重组蛋白以杂和菌毛的形式得到了表达 ,并保持CS3和外源表位的抗原性 ,表明脊髓灰质炎病毒C3表位和C myc十肽表位在细菌表面得到了表达 ,证实载体pCSB136和pCSX72可用于外源表位的呈现 ,为构建基因工程活菌疫苗奠定了基础     

脊髓灰质炎病毒C3表位和C—myc＋肽表位在细菌表面的表达

为了进一步验证载体pCSB136和pCSX72作为表面呈现载体的可行性,化学合成脊髓灰质炎病毒C3表位和C-myc十肽有位的基因片段,并插入到上述载体的相应位点间,采用全菌PCR筛选到正向插入的重组子,全细胞ELISA和电镜观察显示,重组蛋白以杂和菌毛的形式得到了表达,并保持CS3和外源位的抗原性,表明脊髓灰质炎病毒C3表位和C-myc十肽捕位在细菌表面得到了表达,证实载体pCSB136和pCSX72可用于外源表位的呈现,为构建基因工程活苗疫苗奠定了基础。     

SEF14菌毛基因操纵子在肠炎沙门氏菌和D-群沙门氏菌的变异分析

【目的】本文旨在探索SEF14菌毛特异性表达于D-群沙门氏菌,特别是肠炎沙门氏菌以及都柏林沙门氏菌的原因。【方法】应用PCR扩增以及序列测定检测了18株鸡白痢沙门氏菌,11株肠炎沙门氏菌以及1株都柏林沙门氏菌标准株中sefA,sefD和sefR基因序列,并分析比对其序列变异。【结果】以11株肠炎沙门氏菌以及1株都柏林沙门氏菌染色体DNA为模板能成功扩增sefA,sefD以及sefR基因;从18株鸡白痢沙门氏菌中均能成功扩增sefA基因,但只有分离于1980年之前的7株分离菌能成功扩增sefD和sefR基因,而另11株1980年后分离菌PCR扩增sefD和sefR基因却无任何产物。比对PCR扩增产物测序结果发现,11株肠炎沙门氏菌以及1株都柏林沙门氏菌株中sefA,sefD以及sefR基因序列和已发表的序列(GenBank登录号为L11008,U07129和AF233854)100%同源;7株鸡白痢沙门氏菌sefD基因测序结果表明,在196位点处发生碱基缺失,造成移码突变,提前于氨基酸残基71位点处产生终止密码子。优化菌毛表达条件,体外抽提和纯化菌毛并进一步试验证明:肠炎沙门氏菌以及都柏林沙门氏菌体外能很好表达SEF14菌毛,但鸡白痢沙门氏菌在相同培养条件下却无任何表达迹象。【结论】SEF14菌毛操纵子亚单位基因sefA,sefD以及调节基因sefR在不同沙门氏菌中的变异情况可能是SEF14菌毛局限性表达的原因之一。     

转基因水稻BPL9K-2事件特异性检测方法的建立

利用hiTAIL-PCR(high efficient thermal asymmetric interlaced PCR)法扩增获得了转基因水稻BPL9K-2的外源基因插入位点的左旁侧序列450bp,与水稻参考基因组数据比对发现其左边界插入在水稻基因组第10号染色体短臂的1 037 765位核苷酸残基之后。根据水稻参考基因组序列和外源基因右边界序列,设计引物扩增得到485bp的特异片段,通过数据库比对发现其右边界插入在水稻基因组第10号染色体短臂的1 037 825位核苷酸残基之前。因为外源基因插入和非正常重组,水稻基因组上缺失了59个核苷酸。基于左右旁侧序列,建立了转基因水稻BPL9K-2的事件特异性定性PCR检测方法,可以分别扩增到片段大小为449bp和485bp的特异条带。该方法特异性好,灵敏度高,能够在BPL9K-2基因组DNA相对含量为0. 1%的模板中检测出转基因成分。依据旁侧序列,建立了快速鉴定转基因后代植株外源基因型的三引物PCR检测方法。这些方法的建立,为转基因水稻BPL9K-2的应用和检测提供了技术支持。     

抗除草剂转基因大豆插入拷贝数及其旁侧序列分析

目的:确定抗除草剂转基因大豆外源基因拷贝数和其插入位点侧翼序列.方法:采用绝对定量PCR法测定转EPSPS基因大豆中外源基因拷贝数,内参照基因标准曲线选用大豆凝集素(Lectin)基因为标准品,外源基因标准曲线以含EPSPS基因的阳性质粒为标准品.采用基因组步移技术和巢式PCR方法确定抗除草剂转基因大豆插入位点旁侧序列.结果:抗除草剂转基因大豆外源基因的拷贝数为1.CaMV35S上游扩增887bp,NOS下游扩增1 340bp.结论:明确了EPSPS外源基因在转基因大豆中为单拷贝,转基因大豆插入位点附近大豆基因组发生了DNA重排.     

用人源肠毒素性大肠杆菌CS3菌毛构建新型呈现载体

根据对人源大肠杆菌菌毛CS3亚单位亲水性、表位、二级结构和柔韧性计算机预测结果,以CS3亚单位第72位氨基酸残基之后作为外源表位的插入位点,构建了一种新的表面呈现载体pCSX72。用该载体分别表达口蹄疫病毒（FMDV）的VP1表位和C-myc的十肽表位（410-419aa）。SDS-PAGE结果以及电镜和免疫电镜观察证明,插入的外源表位和CS3亚单位以杂合菌毛的形式呈现在菌体表面。ELISA检测结果表明,pCSX72表达的杂合蛋白的抗原性较之其他插入位点的载体要高得多。用重组细菌腹腔免疫小鼠,能够诱发机体对杂合蛋白的双重免疫应答。构建的表面呈现载体可望成为构建多价疫苗的有力工具。     

外源表位在Salmonella菌毛上的表达

过去的20年中,在细菌表面展示外源多肽的表达系统的研究取得了重要进展。而其中相当一部分是以细菌菌毛作为表达载体用于表达外源多肽或蛋白。本文将详述一种特殊的利用基因置换构建的沙门菌菌毛外源多肽展示系统,同时介绍一些其他的菌毛展示系统并探讨他们的优劣性。     

拟康氏木霉eg1基因的克隆及在酿酒酵母中的分泌表达

从拟康氏木霉3.3002基因组中克隆了内切葡聚糖酶EGI基因,该基因全长1566 bp,由3个外显子2个内含子组成,编码461个氨基酸.编码蛋白EGI的N端为22aa组成的信号肽,其后依次为催化结构域、连接肽和结合结构域.采用重叠PCR法获得无内含子的内切葡聚糖酶基因eg1,并将其成熟肽编码序列插入酿酒酵母分泌型表达载体pYEα中,构建成pYEα-Peg1重组质粒,转化酿酒酵母.重组转化子经β-半乳糖诱导,检测表达产物的分子大小以及酶活,结果表明,转化子在刚果红平板上可产生明显的水解圈;酶活检测显示该基因能在酿酒酵母中表达有生物活性的EG I并分泌到胞外;SDS-PAGE电泳显示EGI蛋白分子量比预期目的蛋白稍偏大.     

南极深海底泥色盐杆菌属NJS-2 ectABC基因克隆及二氨基丁酸转氨酶ectA基因的表达

从南极深海底泥中分离筛选得到一株中性嗜盐菌Chromhalobacter sp.NJS-2,以该菌株基因组为模板,利用PCR技术扩增出ectABC基因,基因全序列大小为2378bp。OMIGA软件分析该基因序列上含有三个阅读框,大小分别为576bp、1272bp和393bp,预测其分别编码二氨基丁酸乙酰转移酶（EctA）、二氨基丁乙酸转氨酶（EctB）和四氢嘧啶合酶(EctC)。将二氨基丁酸乙酰转移酶ectA基因的PCR扩增产物克隆至表达载体pET-his, 构建重组表达载体pET-his-ectA,并经酶切、PCR鉴定和测序验证,结果表明其目的基因的插入位置、大小和读码框均正确。SDS-PAGE分析,出现大小约21kDa的目的蛋白条带。     

伤寒沙门菌bcfD基因敲除突变株的构建

目的:构建伤寒沙门菌Ty2菌株菌毛亚单位bcfD基因敲除突变株.方法:利用交错PCR得到bcfD基因缺失且含其两侧翼序列的片段,将该片段与pMD 18-T连接,亚克隆到pYG4,电转入大肠埃希菌S17-1/λpir菌株,阳性菌株与受体菌伤寒沙门氏菌Ty2进行固相杂交后筛选.结果:成功获得敲除bcfD基因序列954bp的敲除突变株.结论:交错PCR有利于细菌基因精确敲除突变株的构建,bcfD基因敲除株的构建将为进一步研究该基因在伤寒沙门菌中的功能奠定了基础.     

Salmonella enteritidis fimbriae displaying a heterologous epitope reveal a uniquely flexible structure and assembly mechanism

Two distinct Salmonella fimbrins, AgfA and SefA, comprising thin aggregative fimbriae SEF17 and SEF14, respectively, were each genetically engineered to carry PT3, an alpha-helical 16-amino acid Leishmania T-cell epitope derived from the metalloprotease gp63. To identify regions within AgfA and SefA fimbrins amenable to replacement with this epitope, PCR-generated chimeric fimbrin genes were constructed and used to replace the native chromosomal agfA and sefA genes in Salmonella enteritidis. Immunoblot analysis using anti-SEF17 and anti-PT3 sera demonstrated that all ten AgfA chimeric fimbrin proteins were expressed by S. enteritidis under normal growth conditions. Immunoelectron microscopy confirmed that eight of the AgfA::PT3 proteins were effectively assembled into cell surface-exposed fimbriae. The PT3 replacements in AgfA altered Congo red (CR) binding, cell-cell adhesion and cell surface properties of S. enteritidis to varying degrees. However, these chimeric fimbriae were still highly stable, being resistant to proteinase K digestion and requiring harsh formic acid treatment for depolymerization. In marked contrast to AgfA, none of the chimeric SefA proteins were expressed or assembled into fimbriae. Since each PT3 replacement constituted over 10% of the AgfA amino acid sequence and all ten replacements collectively represented greater than 75% of the entire AgfA primary sequence, the ability of AgfA to accept large sequence substitutions and still assemble into fibers is unique among fimbriae and other structural proteins. This structural flexibility may be related to the novel fivefold repeating sequence of AgfA and its recently proposed structure Proper formation of chimeric fimbrial fibers suggests an unusual assembly mechanism for thin aggregative fimbriae which tolerates aberrant structures. This study opens a range of possibilities for Salmonella thin aggregative fimbriae as a carrier of heterologous epitopes and as an experimental model for studies of protein structure.     

Identification and sequence analysis of lpfABCDE, a putative fimbrial operon of Salmonella typhimurium.

A chromosomal region present in Salmonella typhimurium but absent from related species was identified by hybridization. A DNA probe originating from 78 min on the S. typhimurium chromosome hybridized with DNA from Salmonella enteritidis, Salmonella heidelberg, and Salmonella dublin but not with DNA from Salmonella typhi, Salmonella arizonae, Escherichia coli, and Shigella serotypes. Cloning and sequence analysis revealed that the corresponding region of the S. typhimurium chromosome encodes a fimbrial operon. Long fimbriae inserted at the poles of the bacterium were observed by electron microscopy when this fimbrial operon was introduced into a nonpiliated E. coli strain. The genes encoding these fimbriae were therefore termed lpfABCDE, for long polar fimbriae. Genetically, the lpf operon was found to be most closely related to the fim operon of S. typhimurium, both in gene order and in conservation of the deduced amino acid sequences.     

Structure and characterization of AgfB from Salmonella enteritidis thin aggregative fimbriae

The agfBAC operon of Salmonella enteritidis encodes thin aggregative fimbriae, fibrous, polymeric structures primarily composed of AgfA fimbrins. Although uncharacterized, AgfB shows a 51 % overall amino acid sequence similarity to AgfA. Using AgfB epitope-specific antiserum, AgfB was detected as a minor component of whole, purified fimbriae. Like AgfA, AgfB was released from purified fimbriae by >70 % formic acid, whereupon both AgfA-AgfA and AgfA-AgfB dimers as well as monomers were detected. This suggested that AgfB may form specific, highly stable, structural associations with AgfA in native fimbrial filaments, associations that were weakened in structurally unstable fibers derived from AgfA chimeric fimbrial mutants. Detailed sequence comparisons between AgfA and AgfB showed that AgfB harbored a similar fivefold repeated sequence pattern (x(6)QxGx(2)NxAx(3)Q), and contained structural motifs similar to the parallel beta helix model proposed for AgfA. Molecular modeling of AgfB revealed a 3D structure remarkably similar to that of AgfA, the structures differing principally in the surface disposition of non-conserved, basic, acidic and non-polar residues. Thus AgfB is a fimbrin-like structural homologue of AgfA and an integral, minor component of native thin aggregative fimbrial fibers. AgfB from an agfA deletion strain was detected as a non-fimbrial, SDS-insoluble form in the supernatant and was purified. AgfA from an agfB deletion strain was found in both SDS-soluble and insoluble, non-fimbrial forms. No AgfA-AgfA dimers were detected in the absence of AgfB. Fimbriae formation by intercellular complementation between agfB and agfA deletion strains could not be shown under a variety of conditions, indicating that AgfA and AgfB are not freely diffusible in S. enteritidis. This has important implications on the current assembly hypothesis for thin aggregative fimbriae.     

Overproduction of AgfA subunit of Salmonella enteritidis as a MBP-fusion protein in E. coli

To study the characteristics of recombinant thin aggregative fimbriae of salmonella and to develop a vaccine for salmonella infections, the AgfA subunit gene was amplified from Salmonella entiritidis using PCR. Maltose binding protein (MBP)-AgfA fusion protein was over-produced in E. coli and purified. Antibody against MBP-AgfA was prepared and its immunogenicity was studied.     

Genetics of Sensitivity of Salmonella Species to Colicin M and Bacteriophages T5, T1, and ES18

Nearly all of 62 strains of Salmonella paratyphi B were sensitive to colicin M and phage T5 but resistant to phages T1 and ES18 and to colicin B. All tested S. typhimurium strains were resistant to colicin M and phage T5, and many were sensitive to phage ES18. A rough S. typhimurium LT2 strain given the tonA region of Escherichia coli or S. paratyphi B became sensitive to colicin M and phage T5. We infer that the tonA allele of S. paratyphi B, like that of E. coli, determines an outer membrane protein that adsorbs T5 and colicin M but not phage ES18, whereas the S. typhimurium allele determines a protein able to adsorb only ES18. The partial T1 sensitivity of a rough LT2 strain with a tonA allele from E. coli or S. paratyphi B and also the tonB(+) phentotype of an E. coli B trp-tonB Delta mutant carrying an F' trp of LT2 origin showed that S. typhimurium LT2 has a tonB allele like that of E. coli with respect to determination of sensitivity to colicins and phage T1. Rough S. paratyphi B, although T5 sensitive, remained resistant to T1 even when given F' tonB(+) of E. coli origin. Classes of Salmonella mutants selected as resistant to colicin M included: T5-resistant mutants, probably tonA(-); mutants unchanged except for M resistance, perhaps tolerant; and Exb(+) mutants, producing a colicin inhibitor (presumably enterochelin). Some Exb(+) mutants were resistant to a bacteriocin inactive on E. coli but active on all tested S. paratyphi B and S. typhimurium strains (and on nearly all other tested Salmonella). A survey showed sensitivity to colicin M in several other species of Salmonella.     

Structural characterization of the Salmonella typhimurium LT2 umu operon.

The umuDC operon of Escherichia coli encodes functions required for mutagenesis induced by radiation and a wide variety of chemicals. The closely related organism Salmonella typhimurium is markedly less mutable than E. coli, but a umu homolog has recently been identified and cloned from the LT2 subline. In this study the nucleotide sequence and structure of the S. typhimurium LT2 umu operon have been determined and its gene products have been identified so that the molecular basis of umu activity might be understood more fully. S. typhimurium LT2 umu consists of a smaller 417-base-pair (bp) umuD gene ending 2 bp upstream of a larger 1,266-bp umuC gene. The only apparent structural difference between the two operons is the lack of gene overlap. An SOS box identical to that found in E. coli is present in the promoter region upstream of umuD. The calculated molecular masses of the umuD and umuC gene products were 15.3 and 47.8 kilodaltons, respectively, which agree with figures determined by transpositional disruption and maxicell analysis. The S. typhimurium and E. coli umuD sequences were 68% homologous and encoded products with 71% amino acid identity; the umuC sequences were 71% homologous and encoded products with 83% amino acid identity. Furthermore, the potential UmuD cleavage site and associated catalytic sites could be identified. Thus the very different mutagenic responses of S. typhimurium LT2 and E. coli cannot be accounted for by gross differences in operon structure or gene products. Rather, the ability of the cloned S. typhimurium umuD gene to give stronger complementation of E. coli umuD77 mutants in the absence of a functional umuC gene suggests that Salmonella UmuC protein normally constrains UmuD protein activity.     

Isolation and characterization of conditional adherent and non-type 1 fimbriated Salmonella typhimurium mutants

Mutations in the genes encoding the type 1 fimbriae of Salmonella typhimurium were isolated by selecting for the deletion of Tn10 inserted adjacent to the chromosomal fim+ genes and screening for the loss of mannose-sensitive haemagglutination (HA) activity. S. typhimurium strains with Tn10 insertions in ahp were hypersensitive to peroxides, and tetracycline-sensitive derivatives of ahp::Tn10 mutants displayed two fim mutant phenotypes. The predominant class of fim mutants did not synthesize type 1 fimbriae. A second type of fim mutant synthesized type 1 fimbriae and exhibited a conditional lipoic acid requirement for HA. A fim-lip conditional mutant synthesized type 1 fimbriae when grown in Mueller-Hinton broth but the haemagglutinating activity of the fimbriae was dependent upon the addition of lipoic acid to the growth medium. Independently isolated lip mutations did not demonstrate a similar pleiotropic effect on HA. Western blots of fimbriae extracted from a fim-lip conditional mutant that was grown under permissive and restrictive conditions indicated the presence of 33 and 36.6 kDa proteins in HA+ fimbriae that were absent in HA- fimbriae. The HA+ phenotype of both conditional and non-fimbriated mutants was restored by transformation with cloned genes encoding S. typhimurium type 1 fimbriae.     

Structural predictions of AgfA, the insoluble fimbrial subunit of Salmonella thin aggregative fimbriae.

The unusually stable and multifunctional, thin aggregative fimbriae common to all Salmonella spp. are principally polymers of the fimbrin subunit, AgfA. AgfA of Salmonella enteritidis consists of two domains: a protease-sensitive, 22 amino acid residue N-terminal region and a protease-resistant, 109 residue C-terminal core. The unusual amino acid sequence of the AgfA core region comprises two-, five- and tenfold internal sequence homology patterns reflected in five conserved, 18-residue tandem repeats. These repeats have the consensus sequence, Sx5QxGx2NxAx3Q and are linked together by four or five residues, (x)xAx2. The predicted secondary structure for this unusual arrangement of tandem repeats in AgfA indicates mainly extended conformation with the beta strands linked by four to six residues. Candidate proteins of known structure with motifs of alternating beta strands and short loops were selected from folds described in SCOP as a source of coordinates for AgfA model construction. Three all-beta class motifs selected from the Serratia marcescens metalloprotease, myelin P2 protein or vitelline membrane outer protein I were used for initial AgfA homology build-up procedures ultimately resulting in three structural models; beta barrel, beta prism and parallel beta helix. The beta barrel model is a compact, albeit irregular structure, with the beta strands arranged in two antiparallel beta sheet faces. The beta prism model does not reflect the 5 or 10-fold symmetry of the AgfA primary sequence. However, the favored, parallel beta helix model is a compact coil of ten helically arranged beta strands forming two parallel beta sheet faces. This arrangement predicts a regular, potentially stable, C-terminal core region consistent with the observed tandem repeat sequences, protease-resistance and strong tendency of this fimbrin to oligomerize and aggregate. Positional conservation of amino acid residues in AgfA and the Escherichia coli AgfA homologue, CsgA, provides strong support for this model. The parallel beta helix model of AgfA offers an interesting solution to a multifunctional fimbrin molecular surface having solvent exposed areas, regions for major and minor subunit interactions as well as fiber-fiber interactions common to many bacterial fimbriae.     

Analysis of the Salmonella fim gene cluster: Identification of a new gene (fimI) encoding a fimbrin-like protein and located downstream from the fimA gene

Abstract The fimA gene coding for the major component (fimbrin) of type 1 fimbriae was mapped within the Salmonella typhi fim gene cluster, and its nucleotide sequence determined. The deduced amino acid sequence of S. typhi fimbrin is highly homologous to that of S. typhimurium type 1 fimbrin and showed similarity to that of other enterobacterial type 1 fimbrins. Downstream of fimA , an open reading frame was found, named fimI , able to encode a fimbrin-like protein. The fimI product could represent the counterpart, in type 1 fimbriae, of the PapH protein involved in cell anchoring and length modulation of Escherichia coli Pap pili. This genetic organization was found to be common to other Salmonella serovars, including S. typhimurium and S. choleraesuis .