长双歧杆菌NCC2705高效转化系统的建立及GFP表达

目的:建立长双歧杆菌NCC2705高效稳定的电转化系统,并以其为宿主表达绿色荧光蛋白(GFP),构建一个稳定的带报告基因的表达载体。方法:从双歧杆菌克隆载体pDG7中切取其在双歧杆菌中复制所必需的pMB1复制子插入质粒pUC19的多克隆位点区,并将gfp基因在双歧杆菌中进行表达;设计双歧杆菌电击转化体系,研究在不同电击电压条件下的电转效率。结果:首先构建了大肠杆菌-长双歧杆菌穿梭质粒pUB1和带有gfp基因的表达质粒pUB2,用电击法将之转化至双歧杆菌,当细菌生长到D600nm约为0.5时制备感受态细胞,在电容25μF、电阻200Ω、电压12.5 kV/cm的电击条件下进行完整质粒转化,可得到较高的转化率。结论:构建了以长双歧杆菌NCC2705为宿主的高效稳定的表达系统,为进一步研究益生菌的分子生物学和功能特性提供了基础。     

大肠杆菌-长双歧杆菌穿梭载体的构建及PTEN在长双歧杆菌中的表达

长双歧杆菌可特异地定植于实体瘤低氧区,可用做肿瘤靶向性基因治疗的载体,而构建大肠杆菌-长双歧杆菌穿梭质粒则被证明是外源基因在长双歧杆菌中稳定表达的有效途径。为了构建能在长双歧杆菌中稳定表达外源基因的穿梭质粒并检测携带抑癌基因的工程菌对小鼠实体瘤的抑制效果,利用软件设计并合成了48条部分序列相互重叠的引物,通过PCR合成了长双歧杆菌质粒pMB1序列及长双歧杆菌HU启动子区序列,插入克隆载体pMD18-T,构建穿梭载体pMB-HU,该载体可在大肠杆菌DH5α及长双歧杆菌L17中稳定复制。PTEN基因编码具有蛋白质和酯类双重特异性磷酸酶活性的抑癌因子。将PTEN基因cDNA序列插入载体pMB-HU中HU启动子下游,构建重组质粒pMB-HU-PTEN,电击转化长双歧杆菌后,Western blot检测表明,表达产物中存在55kDa的PTEN蛋白特异条带。抑癌试验表明:与对照组相比,携带PTEN基因的长双歧杆菌可显著抑制小鼠实体瘤的生长。上述结果为以长双歧杆菌为载体的实体瘤靶向性基因治疗研究奠定了基础。     

大肠杆菌-双歧杆菌穿梭表达载体的构建及内皮抑素基因的表达

目的:构建大肠杆菌-长双歧杆菌穿梭表达载体,并通过此载体使人内皮抑素基因在大肠杆菌和长双歧杆菌中得到表达。方法:以质粒pDG7、pBCSK( )、pET-9C为基础,构建大肠杆菌-长双歧杆菌穿梭表达载体pET-1128,并将人内皮抑素基因插入到新构建的表达载体中,分别转化大肠杆菌BL21(DE3)和长双歧杆菌NQ-1501。诱导表达,表达产物经SDS-PAGE和WesternBlot鉴定。结果:成功构建了大肠杆菌-双歧杆菌穿梭载体,人内皮抑素基因在大肠杆菌和长双歧杆菌中均可表达。结论:构建的穿梭载体为今后用双歧杆菌作为生理菌载体进行肿瘤的基因治疗奠定了基础。     

大肠埃希菌—双歧杆菌穿梭表达载体的构建及白介素-10基因的表达

目的构建能够在大肠埃希菌和双歧杆菌中穿梭表达目的基因的载体,并用此载体在大肠埃希菌和双歧杆菌中表达人白介素-10基因（hIL-10）的蛋白产物;为hIL-10基因重组双歧杆菌治疗炎症性肠病做前期准备。方法以质粒pDG7为模板扩增pMB1片段,构建表达质粒pET28B1。用PCR法扩增hIL-10基因,将此目的基因以及pET28B1经酶切后用连接酶连接,形成重组质粒pET28B1-hIL10。pET28B1-IL10转染大肠埃希菌BL21和长双歧杆菌。最后用Western blot检测hIL-10基因在大肠埃希菌和长双歧杆菌中的表达情况。结果pET28B1-hIL10阳性克隆扩增后提取质粒并进行基因测序,结果显示插入片段为hIL-10,序列正确且无突变。hIL-10基因在大肠埃希菌、长双歧杆菌中的诱导表达产物通过Western blot检测验证为IL-10蛋白,显示该hIL-10表达载体在大肠埃希菌阳性克隆中经诱导可高量表达,在长双歧杆菌体中有少量表达。结论成功构建质粒pET28B1,该质粒能够在大肠埃希菌和双歧杆菌中穿梭表达目的基因hIL-10。     

副干酪乳酪杆菌ZY-1内源性质粒分析及其表达系统的构建与应用

高效稳定的乳杆菌表达载体的构建是实现其菌种改良和个性化菌株开发的关键。本研究从副干酪乳酪杆菌(Lacticaseibacillus paracasei) ZY-1中分离出4个内源性质粒并进行功能分析。通过将pLPZ3与pLPZ4的复制子rep,与pNZ5319质粒的氯霉素乙酰转移酶报告基因cat、pUC19的复制子ori构建大肠杆菌-乳酸菌穿梭载体pLPZ3N与pLPZ4N,进一步加上启动子Pldh3和mCherry红色荧光蛋白,获得表达载体pLPZ3E与pLPZ4E。pLPZ3与pLPZ4质粒大小分别为6 289 bp和5 087 bp,GC含量分别为40.94%和39.51%。2个穿梭载体可成功转化至乳酪杆菌属中,pLPZ4N的转化效率(5.23×10²-8.93×10²CFU/μg)略高于pLPZ3N。乳酸菌表达载体pLPZ3E与pLPZ4E转化至副干酪乳酪杆菌S-NB后,成功获得了mCherry红色荧光蛋白的表达。以P_ldh3为启动子构建的重组表达载体pLPZ4E-lacG转化得到的重组菌,其β-半乳糖苷酶酶活性...     

双歧杆菌质粒聚合酶基因表达系统的构建及其鉴定

目的构建可以在双歧杆菌表达外源性基因的系统。方法PCR扩增双歧杆菌质粒聚合酶基因（BPP）并连接至质粒pBS—T以形成重组质粒pBS—BPP。PCR扩增双歧杆菌内源性阿拉伯糖苷酶的启动子及分泌性信号肽DNA序列（ara）并连接至质粒pBAD—A以形成重组质粒pBAD—ara,然后将增强绿色荧光蛋白（eGFP）基因连接至质粒pBAD—ara以形成重组质粒pBAD—ara—GFP。采用基因重组技术重组含有ara、BPP、eGFP基因序列并可将外源性基因分泌表达于菌体外及锚定表达于细胞壁的质粒pBS—BPP—ara—GFP,激光共聚焦显微镜下观察含有pBS—BPP—ara—GFP质粒及对照质粒的E．coli,验证eGFP定位表达情况。结果所构建的表达系统可以在E．coli中表达eGFP基因。结论通过基因重组方法成功构建了双歧杆菌表达系统,其可将外源基因分泌表达于菌体外。     

一株双歧杆菌质粒聚合酶基因的PCR扩增和鉴定

目的PCR扩增人双歧杆菌天然质粒的聚合酶基因。方法用改良型MRS双歧杆菌选择培养基,从人新鲜粪便分离长双歧杆菌,PCR扩增长双歧杆菌质粒聚合酶(Bifidobacterium plasmid polymerase,BPP)基因,对BPP基因检测阳性的PCR产物通过序列分析,进行鉴定。结果人长双歧杆菌天然质粒的聚合酶基因PCR扩增后,经1.0%琼脂糖凝胶电泳,测得BPP基因的相对分子质量约为1.9 kb。通过BLAST序列比对分析与GenBank中相应基因同源性为96%。结论成功克隆了1株双歧杆菌天然质粒的聚合酶基因,为构建与双歧杆菌宿主质粒相适应的载体奠定了基础。     

以β-半乳糖苷酶为报告基因的原核启动子检测体系构建

目的:以β-半乳糖苷酶为报告基因构建原核启动子检测体系.方法:以由质粒 pDL 扩增获得的 bgaB 基因为报告基因,将其克隆到大肠杆菌-枯草杆菌穿梭载体 pBE2,构建成一个具有启动子活性检测功能的重组质粒pBEB.将组成型启动子P43和诱导型启动子Pcpac克隆入 pBEB,得到重组表达载体 pBEBP43 和 pBEBPapac,转化至大肠杆菌和枯草芽孢杆菌.结果:两种不同类型的启动子均能在大肠杆菌 BL21 和枯草芽孢杆菌 1A751 中启动 bgaB 基因的表达.结论:成功构建具有较为广泛适用性的原核启动子检测体系.     

长双歧杆菌分泌型表达载体的构建及Tum-5基因的表达

摘要：目的 构建能在双歧杆菌内稳定存在并高效分泌表达外源基因的长双歧杆菌质粒表达载体。方法 以质粒pBAD/glll为基础,以双歧杆菌内源性阿拉伯糖苷酶的分泌性信号肽取代质粒原有的分泌性信号肽,并将双歧杆菌天然质粒的聚合酶基因克隆入载体中,构建表达载体pBBADs。将人Tum-5基因克隆入载体中,构建质粒pBBADs-Tum-5,电转化长双歧杆菌NCC2705,L-阿拉伯糖诱导表达后,Western Blot鉴定基因表达。结果 成功的构建了长双歧杆菌分泌型质粒表达载体,Tum-5基因在双歧杆菌内可以表达。结论 构建的表达载体为双歧杆菌用于肿瘤靶向基因治疗奠定了基础。     

双歧杆菌质粒聚合酶基因对质粒载体稳定性的影响

目的探讨双歧杆菌天然质粒的聚合酶基因（Bifidobacterium plasmid polymerase,BPP）对人工构建的大肠埃希菌～双歧杆菌穿梭质粒载体（shuttle vector）在长双歧杆菌中稳定性的影响。方法首先电转化质粒pBADs—A和pBADs-BPP至长双歧杆菌,培养鉴定后,接种含质粒pBADs—A和pBADs-BPP的双歧杆菌于AMP^-和AMP^＋的MRS培养液中。厌氧培养后,将样品涂布于AMP^＋的MRS固体培养板上计数菌落数。结果相同条件下质粒pBADs·BPP组菌落数高于质粒pBADs—A组（P〈0．05）。结论BPP可以增加质粒载体的稳定性。     

Improved cloning vectors for Bifidobacterium spp.

The recombinant plasmids pDLI41, pDGA7 and pDCO7 were constructed by cloning in pDG7, a vector based on Bifidobacterium longum replicon pMB1, the following heterologous genes: Pseudomonas fluorescens lipase, Bacillus licheniformis α-amylase and Streptomyces sp. cholesterol oxidase. The hybrid plasmids efficiently transformed Bifidobacterium belonging to five different species. A novel Escherichia coli-Bifidobacterium set of shuttle vectors based on the replicon pMB1 (pLF5, pCLJ15, pSPEC1) featuring chloramphenicol, erythromycin and spectinomycin resistance genetic determinants as selection marker for bifidobacteria, was developed. The plasmid pTRE3, a derivative of pLF5, was the smallest (2·8 kb) Bifidobacterium vector, possessed a convenient multicloning site and presented high structural and segregational stability.     

Sequence analysis of two cryptic plasmids from Bifidobacterium longum DJO10A and construction of a shuttle cloning vector

Bifidobacterium longum DJO10A is a recent human isolate with probiotic characteristics and contains two plasmids, designated pDOJH10L and pDOJH10S. The complete sequences of both these plasmids have now been determined and consist of two circular DNA molecules of 10,073 and 3,661 bp, with G+C contents of 62.2% and 66.2%, respectively. Plasmid pDOJH10L is a cointegrate plasmid consisting of DNA regions exhibiting very high sequence identity to two other B. longum plasmids, pNAC2 (98%) and pKJ50 (96%), together with another region. Interestingly, the rolling circular replication (RCR) regions of both the pNAC2- and pKJ50-like plasmids were disrupted during the recombination event leading to a further recombination event to acquire a functional replicon. This consists of a new fused rep gene and an RCR-type ori consisting of a conserved DnaA box in an AT-rich region followed by four contiguous repeated sequences consistent with an iteron structure and an inverted repeat. The smaller pDOJH10S had no sequence similarity to any other characterized plasmid from bifidobacteria. In addition, it did not contain any features consistent with RCR, which is the replication mechanism proposed for all the bifidobacteria plasmids characterized to date. It did exhibit sequence similarity with several theta replication-related replication proteins from other gram-positive, high-G+C bacteria, with the closest match from a Rhodococcus rhodochrous plasmid, suggesting a theta mechanism of replication. S1 nuclease analysis of both plasmids in B. longum DJO10A revealed single-strand DNA intermediates for pDOJH10L, which is consistent for RCR, but none were detected for pDOJH10S. As the G+C content of pDOJH10S is similar to that of Rhodococcus rhodochrous (67%) and significantly higher than that of B. longum (60.1%), it may have been acquired through horizontal gene transfer from a Rhodococcus species, as both genera are members of the Actinomycetes and are intestinal inhabitants. An Escherichia coli-B. longum shuttle cloning vector was constructed from pDOJH10S and the E. coli ori region of p15A, a lacZ gene with a multiple cloning site of pUC18, and a chloramphenicol resistance gene (CAT) of pCI372 and was transformed successfully into E. coli and B. longum. It could not be introduced into lactic acid bacteria (Lactococcus and Lactobacillus), showing it was not very promiscuous. It was stably maintained in B. longum in the absence of antibiotic pressure for 92 generations, which is consistent with the segregational stability of theta-replicating plasmids in gram-positive bacteria. This is the first cloning vector for bifidobacteria that does not utilize RCR and should be useful for the stable introduction of heterologous genes into these dominant inhabitants of the large intestine.     

Construction of a novel shuttle vector based on an RCR-plasmid from a haloalkaliphilic archaeon and transformation into other haloarchaea

The pNB101 is the first plasmid to be isolated from an haloalkaliphilic archaea. With insertion of the ColE1 replicon of Escherichia coli, as well as two antibiotic resistance genes at its unique Hin dIII site, a novel shuttle vector between haloarchaea and E. coli was developed. This vector, named pNB102, was successfully transformed into two non-alkaliphilic haloarchaea, Halobacterium salinarum SNOB and Haloarcula hispanica ATCC33960. The presence and stability of pNB102 in the transformants were confirmed by PCR identification, Southern blotting and restriction endonuclease digestion. Results also indicated that the presence of restriction-modification (R-M) systems in some Halobacterium species prevented this transformation. It is the first report that the replicon of pNB101 has such a wide host range, and has taken the first step for construction of the vector/host system in haloalkaliphilic archaea.     

Characterization of plasmids from human infant Bifidobacterium strains: sequence analysis and construction of E. coli-Bifidobacterium shuttle vectors

A survey of infant fecal Bifidobacterium isolates for plasmid DNA revealed that a significant portion of the strains, 17.6%, carry small plasmids. The majority of plasmid-harboring strains belonged to the Bifidobacterium longum/infantis group. Most of the plasmids could be assigned into two groups based on their sizes and the restriction profiles. Three plasmids, pB44 (3.6 kb) from B. longum, pB80 (4.9 kb) from Bifidobacterium bifidum, and pB21a (5.2kb) from Bifidobacterium breve were sequenced. While the former two plasmids were found to be highly similar to previously characterized rolling-circle replicating pKJ36 and pKJ56, respectively, the third plasmid, pB21a, does not share significant nucleotide homology with known plasmids. However, it might be placed into the pCIBb1-like group of bifidobacterial rolling-plasmids based on the homology of its Rep protein and the overall molecular organization. Two sets of Escherichia coli-Bifidobacterium shuttle vectors constructed based on pB44 and pB80 replicons were capable of transforming B. bifidum and B. breve strains with efficiency up to 3x10(4)cfu/microg DNA. Additionally, an attempt was made to employ a broad host range conjugation element, RP4, in developing of E. coli-Bifidobacterium gene transfer system.     

Transformation of Mycoplasma pulmonis: demonstration of homologous recombination, introduction of cloned genes, and preliminary description of an integrating shuttle system

The transposons Tn916 and Tn4001 and a series of integrating plasmids derived from their antibiotic resistance genes were used to examine polyethylene glycol-mediated transformation of Mycoplasma pulmonis. Under optimal conditions, Tn916 and Tn4001 could be introduced into M. pulmonis at frequencies of 1 x 10(-6) and 5 x 10(-5) per CFU, respectively. Integrating plasmids were constructed with the cloned antibiotic resistance determinants of Tn916 and Tn4001, a pMB1-derived plasmid replicon, and mycoplasmal chromosomal DNA and were used to examine recombinational events after transformation into M. pulmonis. Under optimal conditions, chromosomal integrations could be recovered at a frequency of 1 x 10(-4) to 1 x 10(-6) per CFU, depending on the size and nature of the chromosomal insert and the parental plasmid. Integrated plasmids were stable in the absence of selection and could be rescued in Escherichia coli along with adjacent mycoplasma DNA. These studies provide the first direct evidence of a recombination system in the Mollicutes and describe the first E. coli-M. pulmonis shuttle vectors.