烟草多酚氧化酶的分离与固定化技术研究

多酚氧化酶属于氧化还原酶类,国际酶学委员会推荐名为儿茶酚氧化酶（ＥＣ１．１０．３．１ｐｏｌｙｐｈｅｎｏｌｏｘｉｄａｓｅ,ＰＰＯ）．该酶与食品工业、三废处理、医药卫生关系较为密切,因而研究较多．如近年来鸭梨［１］、蘑菇［２］、香蕉果肉组织［３］、荔枝果皮［４］等等中的多酚氧化酶均有研究报道．目前研究用固定化多酚氧化酶检测废水中酚类物质含量,进行环境检测;及其从工业废水中除去酚类,达到治理三废的目的．Ｍｏｓｂａｃｎ［５］（１９７６）研制成多酚氧化酶固定化酶柱,与氧电极检测器组合联用,可检测水中２０…     

Immobilization of Aspergillus oryzae β-galactosidase in ion exchange resins by combined ionic-binding method and cross-linking

The main objective of the present work is to study the immobilization process of Aspergillus oryzae β-galactosidase using the ionic exchange resin Duolite A568 as carrier. Initially, the immobilization process by ionic binding was studied through a central composite design (CCD), by analyzing the simultaneous influences of the enzyme concentration and pH on the immobilization medium. The results indicate that the retention of enzymatic activity during the immobilization process was strongly dependant of those variables, being maximized at pH 4.5 and enzyme concentration of 16 g/L. The immobilized enzyme obtained under the previous conditions was subjected to a cross-linking process with glutaraldehyde and the conditions that maximized the activity were a glutaraldehyde concentration of 3.83 g/L and cross-linking time of 1.87 h. The residual activity of the immobilized enzyme without glutaraldehyde cross-linking was 51% of the initial activity after 30 uses, while the enzyme with cross-linking immobilization was retained 90% of its initial activity. The simultaneous influence of pH and temperature on the immobilized β-galactosidase activity was also studied through a central composite design (CCD). The results indicate a greater stability on pH variations when using the cross-linking process.     

Optimization of isolation conditions for three types of pigment protein-lipid complexes from chloroplasts during solubilization with Triton X-100]

The maximal total release of pigment protein-lipid complexes (PPLC) during their isolation from pea chloroplasts was achieved by 1-hr solubilization with Triton X-100, the Triton:chlorophyll (T/Chl) ratio being 50 mg/mg/ml. The total yield of the reaction center complexes (sigma PPLC RC) was 22,3%, whereas that of the auxiliary light-accumulating complex (ALA-PPLC) was approximately 32% with respect to Chl. An increase in the solubilization time and of the T/Chl ratio resulted in dissociation of ALA-PPLC. On the contrary, the reaction center complexes steadily maintained their composition and high photochemical activity within a wide range of T/Chl during 24--28 hrs of solubilization. The purest preparations of PPLC RC of phostosystem I (PS-I) were obtained by 24 hr-incubation (T/Chl = 80); their Chl/P700 ratio after a single fractionation on DEAE-cellulose was equal to 36. A considerable increase of T/Chl and of the solubilization time hampered the chromatographical separation of PPLC RC of PS-I and PPLC RC of PS-II. The optimal conditions for isolation of PPLC RC of PS-I and PPLC RC of PS-II were: solubilization at T/Chl 80--120 and prolongation of incubation time from 5 to 7 hrs. The photochemical activity of the complexes obtained was maximal and correlated with the minimal content of admixture P700 (1 molecule of P700 per 450--500 molecules of Chl.).     

Preparative-scale kinetic resolution of racemic styrene oxide by immobilized epoxide hydrolase

Epoxide hydrolase from Aspergillus niger was immobilized onto the modified Eupergit C 250 L through a Schiff base formation. Eupergit C 250 L was treated with ethylenediamine to introduce primary amine groups which were subsequently activated with glutaraldehyde. The amount of introduced primary amine groups was 220 μmol/g of the support after ethylenediamine treatment, and 90% of these groups were activated with glutaraldehyde. Maximum immobilization of 80% was obtained with modified Eupergit C 250 L under the optimized conditions. The optimum pH was 7.0 for the free epoxide hydrolase and 6.5 for the immobilized epoxide hydrolase. The optimum temperature for both free and immobilized epoxide hydrolase was 40 °C. The free epoxide hydrolase retained 52 and 33% of its maximum activity at 40 and 60 °C, respectively after 24 h preincubation time whereas the retained activities of immobilized epoxide hydrolase at the same conditions were 90 and 75%, respectively. Immobilized epoxide hydrolase showed about 2.5-fold higher enantioselectivity than that of free epoxide hydrolase. A preparative-scale (120 g/L) kinetic resolution of racemic styrene oxide using immobilized preparation was performed in a batch reactor and (S)-styrene oxide and (R)-1-phenyl-1,2-ethanediol were both obtained with about 50% yield and 99% enantiomeric excess. The immobilized epoxide hydrolase was retained 90% of its initial activity after 5 reuses.     

The study on microwave assisted enzymatic digestion of ginkgo protein

Microwave-assisted enzymatic digestion (MAED) technique was applied for ginkgo protein digestion with both free and immobilized enzyme. Under the optimized conditions of MAED (0.01 g/mL substrate concentration of bromelain, 4500 U/g enzyme/ginkgo protein, 30 min, 300 W microwave power), a higher digestion rate (7.50%) and a significant increase in antioxidant activity (72.7 mg/g) were obtained in contrast with the conventional methods. With the optimized digestion conditions (0.625% glutaraldehyde (v/v), 0.4 mg/mL initial concentration of bromelain and 4 h of immobilization), the activity and effectiveness factor of immobilized bromelain were respectively 86 U and 81.6%. The results of ginkgo digestion by applying MAED indicated that the digestion rate of immobilized bromelain obtained by MAED method (6.41%) was comparable to that of free bromelain in the conventional digestion (8.13%). In both case with immobilized and free bromelain while applying MAED, a homogeneously abundant distribution of peptide fragments (from 7.863 Da to 5856 Da) and a few different peptide profiles were found. This report brings in conclusion that applying MAED with immobilized enzyme has the potential to obtain the highest number of antioxidant activity peptides.     

Improved esterification activity of Candida rugosa lipase in organic solvent by immobilization as Cross-linked enzyme aggregates (CLEAs)

Cross-linked enzyme aggregates (CLEA^®s) were prepared from Candida rugosa lipase (CrL) using glutaraldehyde as the cross-linker. The optimum conditions of the immobilization process were determined (precipitant: ethanol, crosslinker concentration: 25 mM, enzyme concentration: 50 mg/ml, crosslinking time: 45 min.). CLEAs were shown to have several advantages compared to the free enzyme. They were more stable at 50 °C and 60 °C and had good reusability; retaining 40% of their initial activity after 15 recycles in aqueous media and remaining constant at that level thereafter, suggesting some initial leaching in water. The CLEAs catalyzed esterification reactions in cyclohexane, affording higher conversions than with the free enzyme, especially when longer fatty acids and alcohols were used as substrates.     

氨基化硅胶载体固定化纤维素酶的研究

用硅胶作载体,戊二醛作交联剂,制备了固定化的纤维素酶。对制备固定化纤维素酶的偶联剂浓度、pH、给酶量3个影响因素进行了研究,通过正交试验优化得出最佳的固定化条件:交联剂戊二醛浓度为1%,固定化pH值为5,固载量为每克载体100mg纤维素酶。     

米曲霉F-81产中性蛋白酶的固定化条件及其特性

以海藻酸钠为载体,戊二醛为交联剂固定化米曲霉F-81产中性蛋白酶,研究了固定化条件及固定化酶的性质。结果表明,固定化的最佳条件为:固定化时间1 h、海澡酸钠浓度4%、戊二醛浓度9%、CaCl2浓度0.7 mol/L。在此条件下固定化的中性蛋白酶活力为游离酶活力的68%。固定化酶的最适作用温度为65℃,最适作用pH值为7.0。60℃下酶稳定性较好,80℃下处理60 min,粗酶中几乎检测不到酶活力;中性蛋白酶pH稳定范围为6.5-9.5。Km值为24.83 mg/mL,最大反应速率Vmax为0.043 12 mg/min。     

α-Amylase immobilization on gelatin: Optimization of process variables

α-Amylase was extracted and purified from soybean seeds to apparent homogeneity by affinity precipitation. The homogeneous enzyme preparation was immobilized on gelatin matrix using glutaraldehyde as an organic hardener. Response surface methodology (RSM) and 3-level-3-factor Box–Behnken design was employed to evaluate the effects of immobilization parameters, such as gelatin concentration, glutaraldehyde concentration and hardening time on the activity of immobilized α-amylase. The results showed that 20% gelatin (w/v), 10% glutaraldehyde (v/v) and 1 h hardening time yielded an optimum immobilization of 82.5%.     

Immobilization of the cross-linked para-nitrobenzyl esterase of Bacillus subtilis aggregates onto magnetic beads

The para-nitrobenzyl esterase (PNBE), which was encoded by pnbA gene from Bacillus subtilis, was immobilized on amino-functionalized magnetic supports as cross-linked enzyme aggregates (CLEA). The maximum amount of PNBE-CLEA immobilized on the magnetic beads using glutaraldehyde as a coupling agent was 31.4 mg/g of beads with a 78% activity recovery after the immobilization. The performance of immobilized PNBE-CLEA was evaluated under various conditions. As compared to its free form, the optimal pH and temperature of PNBE-CLEA were 1 unit (pH 8.0) and 5 °C higher (45 °C), respectively. Under different temperature settings, the residual enzyme activity was highest for the PNBE-CLEA, followed by covalently fixed PNBE without further cross-linking and the free PNBE. During 40 days of storage pried, the PNBE-CLEA maintained more than 90% of its initial activity while the free PNBE maintained about 60% under the same condition. PNBE-CLEA also retained more than 80% activity after 30 reuses with 30 min of each reaction time, indicating stable reusability under aqueous medium.     

壳聚糖载体的改性及其用于固定化漆酶的研究

利用有机酸改性壳聚糖,并用交联法制备酸化的壳聚糖载体,然后用改性壳聚糖载体固定漆酶。甲酸、乙酸改性壳聚糖的最适条件:壳聚糖与甲酸、乙酸的质量摩尔比(g/mol)分别为100∶1、100∶1.5,戊二醛的质量分数为1%,缓冲溶液的pH分别是4.4、5.0,反应时间为3h;壳聚糖与酒石酸、草酸的质量摩尔比(g/mol)分别为100∶0.5、100∶2,戊二醛的质量分数为2%,缓冲溶液的pH分别是3.6、4.2,反应时间为4.5h。不同有机酸改性的壳聚糖用于漆酶的固定,其酶活都有不同程度的提高,尤其用酒石酸改性的壳聚糖载体效果最好,其酶活提高了57%。     

Optimization of immobilization conditions of Thermomyces lanuginosus lipase on styrene–divinylbenzene copolymer using response surface methodology

Microbial lipase from Thermomyces lanuginosus (formerly Humicola lanuginosa) was immobilized by covalent binding on a novel microporous styrene–divinylbenzene polyglutaraldehyde copolymer (STY–DVB–PGA). The response surface methodology (RSM) was used to optimize the conditions for the maximum activity and to understand the significance and interaction of the factors affecting the specific activity of immobilized lipase. The central composite design was employed to evaluate the effects of enzyme concentration (4–16%, v/v), pH (6.0–8.0), buffer concentration (20–100 mM) and immobilization time (8–40 h) on the specific activity. The results indicated that enzyme concentration, pH and buffer concentration were the significant factors on the specific activity of immobilized lipase and quadratic polynomial equation was obtained for specific activity. The predicted specific activity was 8.78 μmol p-NP/mg enzyme min under the optimal conditions and the subsequent verification experiment with the specific activity of 8.41 μmol p-NP/mg enzyme min confirmed the validity of the predicted model. The lipase loading capacity was obtained as 5.71 mg/g support at the optimum conditions. Operational stability was determined with immobilized lipase and it indicated that a small enzyme deactivation (12%) occurred after being used repeatedly for 10 consecutive batches with each of 24 h. The effect of methanol and tert-butanol on the specific activity of immobilized lipase was investigated. The immobilized lipase was almost stable in tert-butanol (92%) whereas it lost most of its activity in methanol (80%) after 15 min incubation.     

壳聚糖固定化木瓜蛋白酶的研究

以壳聚糖为载体,成二醛为交联剂将木瓜蛋白酶固定化。5％戊二醛在4-6℃下处理载体5h,加酶液(3.5mg/mL蛋白,pH7.2)固定12h,活力回收达32％,作用于酪蛋白的半衰期为36天,其表观K_m(酪蛋白)值为0.075％(W/V),溶液酶的K_m值为0.086％;最适pH7.0～7.5,溶液酶为7.0～8.5。固定化酶在pH8.5以下,溶液酶在9.0以下活力稳定。固定化酶在45℃以下,溶液酶在75℃以下稳定。用6mol/L脲洗脱固定化酶4次(5.5h)活力仍有54.5％。用固定化酶处理啤酒浊度比对照下降了1.5-3.7倍,蛋白质含量下降了44％,冷藏(4℃)120天无冷混浊现象发生并保持了啤酒原有风味和理化性状。     

Immobilization of a keratinolytic protease from Purpureocillium lilacinum on genipin activated-chitosan beads

Keratinase from Purpureocillium lilacinum LPSC # 876 was immobilized on chitosan beads using two different cross-linking agents: glutaraldehyde and genipin. For its immobilization certain parameters were optimized such as cross-linker concentration, activation time and activation temperature. Under optimum conditions, enzyme immobilization resulted to be 96 and 92.8% for glutaraldehyde and genipin, respectively, with an activity recovery reaching up to 81% when genipin was used. The immobilized keratinase showed better thermal and pH stabilities compared to the soluble form, retaining more than 85% of its activity at pH 11 and 74% at 50 °C after 1 h of incubation. The residual activity of immobilized keratinase remained more than 60% of its initial value after five hydrolytic cycles. The results in this study support that glutaraldehyde could be replaced by genipin as an alternative cross-linking eco-friendly agent for enzyme immobilization.     

The slow-down of the CALB immobilization rate permits to control the inter and intra molecular modification produced by glutaraldehyde

Lipase B from Candida antarctica (CALB) has been immobilized on octyl-agarose in two ways: rapidly, in 5 mM sodium phosphate (85% immobilization yield after 30 min), or slowly, in the presence of 30% (v/v) ethanol (40% immobilization yield after 30 min). Both biocatalysts were treated with glutaraldehyde in order to obtain different modification degrees on their amino groups (25, 50 and 100% modification). SDS-PAGE and detergent desorption experiments showed that, when the immobilization was performed in absence of ethanol, very large aggregates were formed by intermolecular crosslinking, while when 30% ethanol was added during immobilization, almost 90% of the enzyme remained as a monomer. The stability of both derivatives improved upon modification, both in thermal inactivation experiments (at pHs 5, 7 and 9) or in the presence of 50% (v/v) dimethylsulfoxide, achieving stabilization values ranging between 5 and 20 depending on the inactivation conditions. The stability increased proportionally with the modification degree, and was also higher when intermolecular bonds were performed (by a 2–4 factor). Moreover, the activity/pH profile was completely altered after enzyme modification, and, under certain conditions, the activity of the modified biocatalysts doubled that of the non-modified immobilized CALB. Results show that the addition of ethanol permits to have a distance between enzyme molecules that did not allow intermolecular crosslinking, and this has permitted to distinguish between the effects of intramolecular glutaraldehyde modifications and intermolecular glutaraldehyde crosslinking. The simple and controlled treatment of CALB-octyl with glutaraldehyde has proved to be an effective way to obtain a biocatalyst with improved activity and stability under different conditions.     

Growth Stimulation of Microorganisms by Pyrroloquinoline Quinone

Yeast alcohol dehydrogenase (ADH), diaphorase (DI) and NAD were co-immobilized on Sepharose that had been repeatedly modified with hexamethylenediamine and glutaraldehyde. The activity and re-usability of the gel were investigated with changing the immobilization conditions of the enzymes and the reaction conditions of the glutaraldehyde used in the modification. The results suggested that the immobilization temperature and the immobilization time of the enzymes mainly had an effect on the stability and activity, respectively. The degree of polymerization of the glutaraldehyde affected both the activity and the re-usability, and A₂₃₅/A_2S0 was used as an index of the degree of polymerization. The optimum conditions were as follows: a temperature and reaction time in the immobilization of the enzymes of 20°C and 7 hr, respectively, and a degree of polymerization of the glutaraldehyde used in the modification of A₂₃₅/A_2S0 = 20. The gel prepared under these optimum conditions was applied to a flow injection analytical system for ethanol. A good linear relationship between the concentration and the response was observed in the range of 20 ~ 80 mm, suggesting that the gel would be applicable to ethanol analysis.     

蒜氨酸酶的固定化及其酶学性质研究

为了提高蒜氨酸酶的稳定性并实现酶的反复利用,研究了影响蒜氨酸酶固定化的因素及固定化蒜氨酸酶的酶学性质。蒜氨酸酶的固定化以壳聚糖微球为载体,戊二醛为交联剂,固定化的最适条件为：戊二醛浓度4%,给酶量20.2U,交联时间2h。固定化蒜氨酸酶的最适pH值7.0,最适温度35℃,米氏常数Km 7.9 mmol/L,操作稳定性比较好,连续使用10次后酶活力损失低于10%。     

Enzymatic transformation of 2-O-α-d-glucopyranosyl-l-ascorbic acid (AA-2G) by immobilized α-cyclodextrin glucanotransferase from recombinant Escherichia coli

This work aims to produce 2-O-α-d-glucopyranosyl-l-ascorbic acid (AA-2G) from ascorbic acid and β-cyclodextrin with immobilized α-cyclodextrin glucanotransferase (α-CGTase) from recombinant Escherichia coli. Molecular sieve (SBA-15) was used as an adsorbent, and sodium alginate was used as a carrier, and glutaraldehyde (GA) was used as a cross-linker. The effects of several key variables on α-CGTase immobilization were examined, and optimal immobilization conditions were determined as the following: glutaraldehyde (GA, cross-linker) 0.01% (v/v), SBA-15 (adsorbent) 2 g/L, CaCl₂ 3 g/L, sodium alginate 20 g/L, adsorption time 3 h, and immobilization time 1 h. In comparison with free α-CGTase, immobilized α-CGTase had a similar optimal pH (5.5) and a higher optimal temperature (45 °C). The continuous production of AA-2G from ascorbic acid and β-cyclodextrin in the presence of immobilized α-CGTase was carried out, and the highest AA-2G production reached 21 g/L, which was 2-fold of that with free α-CGTase. The immobilization procedure developed here was efficient for α-CGTase immobilization, which was proved to be a prospective approach for the enzymatic production of AA-2G.     

Integrated enzyme purification and immobilization processes with immobilized metal affinity adsorbents

Silica-based immobilized metal affinity chromatography adsorbents with various ligand densities were prepared for the purification and immobilization of poly(His)-tagged d-hydantoinase (DHTase). An adsorbent with a ligand density of 13.0 μmol Cu²⁺/g gel exhibiting the optimal selectivity and a capacity of 1.4 mg/g gel toward the poly(His)-tagged enzyme was identified. The adsorbent was used for the one-step purification of His-tagged enzymes from crude cell lysate with a purity above 90%. The silica-based affinity adsorbents are particularly well suited for industrial scale operations due to their robustness. A packed-bed bioreactor with the DHTase-loaded adsorbents was used for the continuous conversion of d,l-p-hydroxyphenylhydantoin (d,l-HPH) to N-carbamoyl-d-hydroxyphenylglycine, an intermediate for the production of d-hydroxylphenylglycine. Under optimal conditions, 60 °C and pH 8.0, a conversion of 60% was obtained at a residence time of 30 min. Upon extended operation, the catalytic activity of the biocatalysts declined significantly due to enzyme leakage and enzyme denaturation. The extent of enzyme leakage can be attenuated by crosslinking with glutaraldehyde. In this study, we successfully demonstrate that a packed-bed bioreactor containing silica-based IMAC adsorbents can be used for the direct purification and immobilization of poly(His)-tagged enzymes for biotransformation.     

壳聚糖固定化木瓜蛋白酶的研究

以自制的壳聚糖作为载体,用戊二醛作交联剂,优化了固定化条件,研制成壳聚糖固定化木瓜蛋白酶。其活性回收率达到42—53％,操作半衰期达到一个月以上,对热、乙醇以及尿素的稳定性有很大的提高,Km值为0.67×10~2mg/mL,最适温度65—70℃,最适pH8.0,能使啤酒中的蛋白质浓度从56.5mg/L减少到2.7mg/L,可以消除啤酒的低温混浊现象。