猴泡沫病毒（SFV）RT-nestedPCR检测方法的建立及初步应用

目的建立实验猴群及相关生物制品猴泡沫病毒（SFV）的PCR检测方法。方法选择SFV-1、SFV-3、SFVCPZ前病毒序列的pol基因同源性较高的区域设计嵌套引物对SFV-1毒种进行RT-nestedPCR扩增并克隆测序,以确定其准确性,通过验证方法的特异性和敏感性,初步应用该方法对恒河猴外周血淋巴细胞（PBLs）,常用猴肾传代细胞及猴源性生物制品进行检测。结果经RT-nestedPCR扩增出的片断与SFV-1 cDNA序列同源性达到99%,对10只恒河猴的检测结果为5只阳性,5只阴性,对常用猴肾传代细胞及脊髓灰质炎疫苗的检测结果均为阴性。结论所建立的SFV RT-nestedPCR检测方法能准确的检测出恒河猴SFV的感染情况,对控制实验猴群的质量具有重要意义。该方法可用于检测猴源性生物制品中SFV的污染情况,为保证生物制品应用的安全性提供一定依据。     

猴血中SFV病毒基因PCR检测方法的建立及应用

针对猴泡沫病毒SFV(Simian FoamyVirus)多聚酶区(pol区)设计两对引物,以猴血DNA为模板进行嵌套式PCR扩增,得到500bp左右基因片段,克隆进入pUC-19载体,经测序鉴定为SFV465bp的pol区基因片段。将此段序列与SFV各型425bp的pol区基因片段进行同源性比较,它与SFV-1型的同源性最高,为92.00%。在此基础上,用这两对引物对158例猴血DNA进行检测,阳性54例,阳性率为34.2%。发现在猴群中有较高的SFV病毒的感染。     

猴血中SFV病毒基因PCR检测方法的建立及应用

针对猴泡沫病毒SFV（Simian Foany Virus）多聚酶区（pol区）设计两对引物,以猴血DNA为模板者嵌套式PCR扩增,得到500bp左右基因片段,克隆进入pUC-19载体,经测序鉴定为SFV465bp的pol区基因片段,将此段序列与SFV各型425bp的pol区基因片段进行同源性比较,它与SFV－1型的同源性最高,为92.00%。在此基础上,用这两对引物对158例猴血DNA进行检测,阳性54例,阳性率为34.2%,发现猴群中有较高的SFV病毒的感染。     

SPF鸡胚中内源性白血病病毒全基因序列鉴定与分析

摘要:以国内某3家SPF鸡场的SPF鸡胚成纤维细胞提取的基因组DNA为模板,参照已发表的序列,设计合成了4对检测内源性白血病病毒引物,分别检测gag基因、pol基因、env基因和LTR片段,结果显示4者检出阳性率很高(gag,29/46;pol,27/46;env,24/46;LTR,31/46).设计合成了8对引物,选取4片段检测均为阳性的样品之一,经PCR成功扩增出了8段连续的、相互部分重叠的目的DNA片段,分别连接入T载体进行克隆测序.用DNAstar软件对测序结果进行拼接,从一个鸡胚得到了内源性白血病病毒前病毒全基因组序列.比较分析发现,该序列env基因与已知的E亚群内源性病毒代表株env基因的核苷酸序列同源性在98.5%以上,全基因组序列同源性在99.1%以上,而与其他亚群代表株同源性相对较低,env基因同源性仅为56.3%～91.5%.     

Nested-PCR检测恒河猴泡沫病毒

目的用nested-PCR检测恒河猴泡沫病毒SFV的前病毒形式。方法从SFV-1的pol区域选择两对引物分别对原代猴肾细胞（rhesus monkey kidney,RMK）及猴外周血淋巴细胞（peripheral blood lymphocytes,PBLs）进行体外扩增,扩增产物经1.0%的琼脂糖凝胶电泳,证实其特异性。阳性对照使用具有典型泡沫样病变的RMK377细胞株的前病毒DNA,阳性对照的PCR扩增产物经测序证实,阴性对照为恒河猴的SRV-1cDNA。结果nested-PCR能快速灵敏的直接从猴外周血淋巴细胞检出SFV的前病毒形式,与RMK细胞培养结果基本相一致。结论本实验所建立的检测SFV的nested-PCR法能快速准确的检测猴群中的SFV的带毒情况,对于提高实验猴的质量具有重要意义。     

一株H3N2亚型猪流感病毒广东分离株的基因组序列分析

从广东省疑似流感发病猪分离到1株H3N2亚型猪流感病毒(A/Swine/Guangdong/01/2005(H3N2)),对其各个基因进行克隆与测序,并与GenBank中收录的其它猪流感、禽流感和人流感的相关基因进行比较,结果表明,HA全基因与广东2003~2004年分离的H3N2猪流感毒株的核苷酸序列同源性在99%以上,与纽约90年代末分离的H3N2人流感毒株同源性在98.5%以上;NA基因与纽约1998~2000年分离的H3N2人流感毒株的核苷酸序列同源性在99%以上;NS基因、M基因的核苷酸序列与H1N1亚型猪流感毒株A/swine/HongKong/273/1994(H1N1)的核苷酸序列同源性较高,分别为97.9%、98.4%,与美洲A/swine/Iowa/17672/1988(H1N1)的核苷酸序列同源性分别为96.7%、97.1%;其他基因的核苷酸序列与H3N2人流感毒株具有很高的同源性。因此,推测其M和NS基因来源于H1N1亚型猪流感病毒,HA、NA及其他基因均来源于H3N2亚型人流感病毒。表明此H3N2亚型猪流感病毒为H3N2亚型人流感病毒和H1N1亚型猪流感病毒经基因重排而得到的重组病毒。     

狂犬病病毒aG株全基因组序列测定及遗传稳定性分析

目的探究狂犬病病毒(Rabies virus,RV)aG株全基因组序列特征及遗传稳定性。方法严格按疫苗生产工艺进行传代,提取主种子批、工作种子批及疫苗原液病毒RNA,通过RT-PCR技术扩增全基因组各片段基因,然后分别将其克隆到p GEM-T载体中,并进行序列测定;采用DNAStar软件包对aG株与Gen Bank中4aGV参考株(JN234411)以及18株基因1型RV参考株进行同源性分析。结果 aG株全基因组由11 925个核苷酸组成,共编码3 600个氨基酸。疫苗原液与主种子批全基因组核苷酸和氨基酸同源性均为100%,而工作种子批与主种子批的核苷酸与氨基酸同源性分别为99.97%和99.92%;aG株与4aGV参考株全基因组核苷酸与推导的氨基酸同源性均为99.9%,其与18株基因1型参考株核苷酸与氨基酸序列同源性分别为84.2%~97.6%和93.7%~98.3%;aG株传代病毒与4aGV参考株全基因组氨基酸序列高度保守,且各主要功能区未发生变异。结论狂犬病病毒aG株在实验室长期生产传代过程中,全基因组遗传特性稳定。     

蓝舌病毒血清5型毒株S7基因编码区的分子克隆与序列分析

目的:对蓝舌病毒(BTV)血清5型毒株(BTV-5)的S7基因编码区(ORF)进行克隆和序列分析。方法:用TRIzol LS试剂提取病毒总RNA,经反转录-聚合酶链反应(RT-PCR)扩增BTV-5型毒株S7基因的编码区,将扩增片段克隆到pGEM-T Easy载体上,对阳性克隆进行核苷酸序列测定;采用DNAStar和DNASIS v2.5软件对环状病毒属不同种群的S7基因ORF序列及其推导的氨基酸序列进行同源性及系统进化树分析。结果:克隆的基因片段长1050bp,为S7基因开放性读码框的全长序列,编码349个氨基酸残基;与环状病毒属不同血清型毒株比较,核酸序列同源性范围为42.2%～96.6%,推导的氨基酸序列同源性范围为40.4%～99.7%。结论:蓝舌病毒与非洲马瘟病毒、鹿流行性出血热病毒分属于不同种群,群内不同血清型的S7基因ORF序列及其推导的氨基酸序列显示出很高的同源性,而不同种群之间的同源性很低。     

J亚群禽白血病病毒蛋鸡分离株SD07LK1全基因组核苷酸序列的比较分析

[目的]分析我国ALV-J蛋鸡分离株的来源和进一步演变趋势.[方法]以J亚群禽白血病病毒(ALV-J)蛋鸡分离株SD07LK1感染的鸡胚成纤维细胞(CEF)基因组:DNA作为其前病毒基因组模板,根据已发表序列设计合成9对引物,经PCR扩增出9段连续的、相互部分重叠的DNA片段和闭合环形前病毒两末端LTR的连接区段,并分别连入T载体进行克隆、测序.[结果]用:DNAstar软件对测序结果进行剪辑和拼接,首次完成了ALV-J蛋鸡分离株SD07LK1的前病毒全基因组核苷酸序列.[结论]将该序列与另外已完成的全基因组序列的比较表明,ALV-J的整个基因组gag和pol基因相对保守,各毒株间对应基因的同源性分别在95.O%以上,env基因的同源性仅为88.6%～94.0%.     

PCR在猴B病毒与猴病毒8型鉴别中的应用

目的为了使BV147与SA8相区别,并进一步分析BV147基因结构特点.方法用PCR方法扩增BV147DNA,并对扩增片段进行克隆测序.结果该序列与美国BVE2490株部分基因(UL27)相对应位置的核苷酸同源性为99.54%,与SA8相对应位置的核苷酸同源性为89.91%.结论进一步证明了新分离物为B病毒.     

Relationship of the env genes and the endonuclease domain of the pol genes of simian foamy virus type 1 and human foamy virus.

We have molecularly cloned and sequenced a portion of the simian foamy virus type 1 (SFV-1); open reading frames representing the endonuclease domain of the polymerase (pol) and the envelope (env) genes were identified by comparison with the human foamy virus (HFV). Unlike the HFV genomic organization, the SFV-1 pol gene overlaps the env gene; thus, the open reading frames reported for HFV between pol and env is not present in SFV-1. Comparisons of predicted amino acid sequences of HFV and SFV-1 reveal that the endonuclease domains of the pol genes are about 84% related. The region predicted to encode the SFV-1 extracellular env domain is 569 codons; SFV-1 and HFV have 64% amino acid similarity in this env domain. The predicted hydrophobic transmembrane env proteins of both HFV and SFV-1 show about 73% similarity. A total of 16 potential glycosylation sites are found in SFV-1 env, and 15 are found in HFV; 11 are shared. SFV-1 has 25 cysteine residues, and HFV has 23 residues; all 23 cysteine residues of HFV are conserved in SFV-1. This sequence analysis reveals that the human and simian foamy viruses are highly related.     

Packaging cell lines for simian foamy virus type 1 vectors

Foamy viruses are nonpathogenic retroviruses that offer several unique opportunities for gene transfer in various cell types from different species. We have previously demonstrated the utility of simian foamy virus type 1 (SFV-1) as a vector system by transient expression assay (M. Wu et al., J. Virol. 72:3451-3454, 1998). In this report, we describe the first stable packaging cell lines for foamy virus vectors based on SFV-1. We developed two packaging cell lines in which the helper DNA is placed under the control of either a constitutive cytomegalovirus (CMV) immediate-early gene or inducible tetracycline promoter for expression. Although the constitutive packaging expressing cell line had a higher copy number of packaging DNA, the inducible packaging cell line produced four times more vector particles. This result suggested that the structural gene products in the constitutively expressing packaging cell line were expressed at a level that is not toxic to the cells, and thus vector production was reduced. The SFV-1 vector in the presence of vesicular stomatitis virus envelope protein G (VSV-G) produced an insignificant level of transduction, indicating that foamy viruses could not be pseudotyped with VSV-G to generate high-titer vectors. The availability of stable packaging cell lines represents a step toward the use of an SFV-1 vector delivery system that will allow scaled-up production of vector stocks for gene therapy.     

cis-Acting Sequences Required for Simian Foamy Virus Type 1 Vectors

We have constructed a series of vectors based on simian foamy virus type 1 (SFV-1) to define the minimum cis-acting elements required for gene transfer. To characterize these vectors, we inserted the coding sequence of the bacterial lacZ gene linked to the cytomegalovirus immediate-early gene promoter. Introduction of a deletion mutation in the leader region between the 5′ long terminal repeat and the start of the gag gene at position 1659 to 1694 completely abrogated gene transfer by the SFV-1 vector. Deletion of 39 nucleotides from position 1692 to 1731 in the leader region resulted in a significant reduction in the transducing-particle titer. Furthermore, we have identified a second cis-acting element located at the 3′ end of the pol gene between position 6486 and 6975 to be critical for SFV-1 vector transduction. These results identify the two important cis-acting elements required for SFV-1 vector construction, and the finding of a cis-acting element in the pol gene is unique among retroviruses.