包含体内重组蛋白质的复性

具有临床、工业生产、药用功能的真核生物蛋白质的供给常常受到其天然来源的限制。可喜的是基因工程技术的发展使许多真核生物蛋白质能在细菌细胞中进行表达[1] 。大肠杆菌由于培养和基因操作容易而成为最受欢迎的表达系统 ,但是重组蛋白质在大肠杆菌中的高水平表达常常导致以包含体形式存在的胞內聚集的变性蛋白质的形成。这种变性蛋白质的量可高达总的重组蛋白质量的95%。由于以包含体形式存在的聚集蛋白质分子不具有正确的三维结构 (天然结构 ) ,它们在水溶液中通常不溶解且没有活性 ,因此大肠杆菌中包含体的形成就意味着可溶性重组蛋白…     

包涵体蛋白体外复性的研究进展

外源基因在大肠杆菌中高水平表达时 ,通常会形成无活性的蛋白聚集体即包涵体。包涵体富含表达的重组蛋白 ,经分离、变性溶解后须再经过一个合适的复性过程实现变性蛋白的重折叠 ,才能够得到生物活性蛋白。近年来 ,发展了许多特异的策略和方法来从包涵体中复性重组蛋白。最近的进展包括固定化复性以及用一些低分子量的添加剂等来减少复性过程中蛋白质的聚集 ,提高活性蛋白的产率。     

蒙古黄芪病程相关蛋白AmPR-10于大肠杆菌不同载体的可溶性表达策略研究

蒙古黄芪病程相关蛋白（Astragalus membranaceus pathogenesis-related protein-10, AmPR-10）具有核酸酶活性,对黄芪生长发育及抗病机制具有重要意义。但从天然黄芪中提取蛋白质的传统方法成本较高,蛋白得率较少。研究首次利用大肠杆菌表达体系对AmPR-10进行可溶性外源表达,构建了3种重组子：①以pET28a为载体构建pET28a-AmPR-10;②以pET30a为载体构建pET30a-AmPR-10;③以pET30a为载体、大肠杆菌分子伴侣skp修饰构建pET30a-skp-AmPR-10。通过SDS-PAGE分析,目的蛋白可溶性表达量比较结果是：pET30a-skp-AmPR-10 > pET30a-AmPR-10 > pET28a-AmPR-10。由蛋白质三级结构模拟分析发现,载体pET-30a上的标签S-tag通过影响AmPR-10局部α螺旋构象而提高目标蛋白的可溶性表达,分子伴侣skp通过提高融合蛋白整体α螺旋比例进一步提升目标蛋白可溶性表达量。研究解决了目前从天然黄芪中提取蛋白操作复杂、提取量小的问题。同时,经测定,目的蛋白具有核酸酶活性,为外源AmPR-10相关活性研究提供了依据。     

重组蛋白质在大肠杆菌体系中的可溶性表达策略

大肠杆菌表达体系因其表达量高、周期短、成本低等诸多优势特征而被广泛用作重组异源蛋白质的表达宿主。据统计超过30%的重组蛋白质药物和50%重组蛋白质的制备是使用大肠杆菌作为表达宿主。蛋白质错误折叠或未折叠以及包涵体形成是大肠杆菌表达体系更广泛应用的主要阻碍。因此,重组蛋白质在大肠杆菌体系中可溶性表达策略探索意义重大。综述了重组蛋白质在大肠杆菌表达系统中不可溶性表达的原因、机制以及影响大肠杆菌表达系统重组蛋白质可溶性的一些关键因素,并基于外源蛋白质在大肠杆菌中表达的各个步骤,总结了目前促进蛋白质在大肠杆菌表达系统中高效、可溶性表达的策略,为进一步拓展大肠杆菌表达体系在重组异源蛋白质可溶性表达中的应用提供参考。     

大肠杆菌I型分泌表达系统研究进展及提高蛋白表达量的策略

大肠杆菌是表达重组蛋白最常用的宿主之一。利用大肠杆菌分泌途径胞外表达重组蛋白具有可促进蛋白正确折叠,有效减少包涵体形成,简化纯化工序等诸多优势,近年来备受关注。其中,大肠杆菌I型分泌途径具有分泌表达速度快,蛋白活性高,对宿主代谢无影响等特点,是目前应用最广泛的分泌途径之一。综述了大肠杆菌I型分泌系统的元件组成和分泌机理及提高I型分泌系统蛋白表达量的有效策略,为重组蛋白生产应用提供了理论依据。     

大肠杆菌Ⅰ型分泌表达系统研究进展及提高蛋白表达量的策略

大肠杆菌是表达重组蛋白最常用的宿主之一。利用大肠杆菌分泌途径胞外表达重组蛋白具有可促进蛋白正确折叠,有效减少包涵体形成,简化纯化工序等诸多优势,近年来备受关注。其中,大肠杆菌Ⅰ型分泌途径具有分泌表达速度快,蛋白活性高,对宿主代谢无影响等特点,是目前应用最广泛的分泌途径之一。综述了大肠杆菌Ⅰ型分泌系统的元件组成和分泌机理及提高Ⅰ型分泌系统蛋白表达量的有效策略,为重组蛋白生产应用提供了理论依据。     

重组大肠杆菌不耐热肠毒素B亚单位的中试发酵及纯化工艺

重组基因工程菌经中试发酵后,诱导表达出以包涵体形式存在的重组大肠杆菌不耐热肠毒素B亚单位(LTB)蛋白。采用Q Sepharose High Perfomance阴离子交换层析,将洗涤、裂解后得到的可溶性蛋白进行纯化,得到纯度高达98%的重组LTB蛋白。利用Sephadex G-25分子筛层析法将重组LTB蛋白中的盐和尿素脱去,使蛋白复性,最终获得目的蛋白纯度为95%。将得到的重组LTB蛋白进行免疫双扩散实验,结果表明此蛋白具有良好的生物学活性。通过高效表达重组LTB蛋白的大肠杆菌发酵,确定了其中试发酵工艺,并建立了Q柱一步纯化即可获得目的蛋白的方法,该工艺简捷、高效、易于工业化生产,为重组LTB蛋白的生产和应用奠定了基础。     

提高重组TRAIL表达产率的优化策略

肿瘤坏死因子相关凋亡诱导配体（Apo2L/TRAIL）是一种新型的抗肿瘤蛋白。针对缩短发酵周期,提高生产效率这一目标,首先在摇瓶中利用响应面设计优化发酵表达条件,总TRAIL蛋白的表达量提高到25.7%。在此基础上研究了发酵条件对可溶性TRAIL蛋白表达量的影响。于3.7L发酵罐放大进行补料-分批发酵实验时,单位菌体可溶性TRAIL蛋白的表达量提高了67%,实现了在大肠杆菌高密度培养过程中单位细胞重组TRAIL蛋白的可溶性表达和体积生产率的提高。     

人纤溶酶原饼环区5(hPK5)基因的分泌型表达

构建人纤溶酶原饼环区5(hPK5)基因的原核可溶性表达载体并进行表达和纯化,获取大量高纯度、具有生物活性的hPK5蛋白。以纤溶酶原cDNA为模板,PCR扩增了hPK5基因,经过适当酶切后构建表达载体pET22b(+)hPK5,转入大肠杆菌BL21(DE3)进行表达并经组氨酸亲和层析获得纯化。带有重组质粒pET22b(+)hPK5的大肠杆菌经IPTG诱导后以可溶性形式表达16kDa的蛋白,其表达量占菌体总蛋白的30%以上,纯化后目的蛋白纯度达95%以上,Western印迹表明重组蛋白具有Histag抗原活性。构建了pET22b(+)hPK5重组质粒并成功地在大肠杆菌中获得可溶性表达,为获得大量hPK5基因工程产品奠定了实验基础。     

一种低温表达型T载体及其应用

在现代生物学和生物技术研究中,通过基因重组表达获得目标蛋白已成为常规技术。因其培养简单、操作方便、遗传背景清楚、克隆表达技术成熟,大肠杆菌表达系统通常是人们表达重组蛋白的首选。但是在常规温度下进行基因的重组表达,动、植物和常温微生物的基因产物多数在数小时内变性沉淀;还有一些重组蛋白对宿主具有细胞毒性,难以得到重组表达。因此,我们构建了1种新型T载体——pEXC-T;它结合TA克隆技术和低温诱导表达功能,具有表达水平高、操作方便、目标蛋白得到分子伴侣保护和低温保存等特点。采用构建和优化的pEXC载体,P1抗原蛋白、溶血素PLO两种不稳定性蛋白在pEXC中都实现了高效的可溶性表达。低温表达系统p EXC的建立和发展为蛋白质的结构与功能的研究,以及抗原和药用蛋白的制备提供了便利的途径。     

pCold-GST vector: a novel cold-shock vector containing GST tag for soluble protein production

The production of recombinant protein in Escherichia coli is often hampered by low expression levels and low solubility. A variety of methodologies have been developed including protein production at low temperature, and fusion protein expression using soluble protein tags. Here, we present the novel cold-shock vector pCold-GST for high-level expression of soluble proteins in E. coli. This vector is a modified pCold I cold-shock vector that includes the glutathione S-transferase (GST) tag. The pCold-GST expression system developed was applied to 10 proteins that could not be expressed using conventional E. coli expression methodologies, and nine of these proteins were successfully obtained in the soluble fraction. The expression and purification of two unstable protein fragments were also demonstrated by employing a C-terminal hexa-histidine tag for purification purposes. The purified proteins were amenable to NMR analyses. These data suggest that the pCold-GST expression system can be utilized to improve the expression and purification of various proteins.     

Advanced genetic strategies for recombinant protein expression in Escherichia coli

Preparations enriched by a specific protein are rarely easily obtained from natural host cells. Hence, recombinant protein production is frequently the sole applicable procedure. The ribosomal machinery, located in the cytoplasm is an outstanding catalyst of recombinant protein biosynthesis. Escherichia coli facilitates protein expression by its relative simplicity, its inexpensive and fast high-density cultivation, the well-known genetics and the large number of compatible tools available for biotechnology. Especially the variety of available plasmids, recombinant fusion partners and mutant strains have advanced the possibilities with E. coli. Although often simple for soluble proteins, major obstacles are encountered in the expression of many heterologous proteins and proteins lacking relevant interaction partners in the E. coli cytoplasm. Here we review the current most important strategies for recombinant expression in E. coli. Issues addressed include expression systems in general, selection of host strain, mRNA stability, codon bias, inclusion body formation and prevention, fusion protein technology and site-specific proteolysis, compartment directed secretion and finally co-overexpression technology. The macromolecular background for a variety of obstacles and genetic state-of-the-art solutions are presented.     

Overproduction of anti-Tn antibody MLS128 single-chain Fv fragment in Escherichia coli cytoplasm using a novel pCold-PDI vector

Overproduction of recombinant proteins in Escherichia coli is often hampered by their failure to fold correctly, leading to their accumulation within inclusion bodies. To overcome the problem, a variety of techniques aimed at soluble expression have been developed including low temperature expression and/or fusion of soluble tags and chaperones. However, a general protocol for bacterial expression of disulfide bond-containing proteins has hitherto not been established. Single chain Fv fragments (scFvs) are disulfide bond-containing proteins often difficult to express in soluble forms in E. coli. We here examine in detail the E. coli expression of a scFv originating from an anti-carbohydrate MLS128 antibody as a model system. We combine three techniques: (1) tagging scFv with thioredoxin, DsbC and protein disulfide isomerase (PDI), (2) expressing the proteins at low temperature using the pCold vector system, and (3) using Origami E. coli strains with mutations in the thioredoxin reductase and glutathione reductase genes. We observed a high expression level of soluble MLS128-scFv in the Origami strain only when PDI is used as a tag. The recombinant protein retains full binding activity towards synthetic carbohydrate antigens. The developed "pCold-PDI" vector has potential for overproduction of other scFvs and disulfide-containing proteins in the Origami strains.     

A new Gateway vector and expression protocol for fast and efficient recombinant protein expression in Mycobacterium smegmatis

A major obstacle associated with recombinant protein over-expression in Escherichia coli is the production of insoluble inclusion bodies, a problem particularly pronounced with Mycobacterium tuberculosis proteins. One strategy to overcome the formation of inclusion bodies is to use an expression host that is more closely related to the organism from which the proteins are derived. Here we describe methods for efficiently identifying M. tuberculosis proteins that express in soluble form in Mycobacterium smegmatis. We have adapted the M. smegmatis expression vector pYUB1049 to the Gateway cloning system by the addition of att recombination recognition sequences. The resulting vector, designated pDESTsmg, is compatible with our in-house Gateway methods for E. coli expression. A target can be subcloned into pDESTsmg by a simple LR reaction using an entry clone generated for E. coli expression, removing the need to design new primers and re-clone target DNA. Proteins are expressed by culturing the M. smegmatis strain mc(2)4517 in autoinduction media supplemented with Tween 80. The media used are the same as those used for expression of proteins in E. coli, simplifying and reducing the cost of the switch to an alternative host. The methods have been applied to a set of M. tuberculosis proteins that form inclusion bodies when expressed in E. coli. We found that five of eight of these previously insoluble proteins become soluble when expressed in M. smegmatis, demonstrating that this is an efficient salvage strategy.     

Increasing the yield of soluble recombinant protein expressed in E. coli by induction during late log phase

Recombinant mammalian proteins expressed in E. coli can be difficult to purify in high yield in a soluble and functional form. Various techniques have been described to prevent proteolysis of expressed proteins and/or their sequestering as insoluble aggregates within inclusion bodies. We report conditions for expressing recombinant proteins from E. coli that significantly enhanced the yield of soluble and functional protein. We demonstrate high-yield recovery of a native, high-molecular-weight RNA binding protein without the aid of fusion protein sequence. The principle factor that increased protein yield was the induction of protein expression in a late log phase culture, although reduced temperature during the induction and a low IPTG concentration also contributed to a higher yield.     

Cultivation at 6-10°C is an effective strategy to overcome the insolubility of recombinant proteins in Escherichia coli

Protein expression in Escherichia coli at 15-25°C is widely used to increase the solubility of recombinant proteins. However, many recombinant proteins are insolubly expressed even at those low temperatures. Here, we show that recombinant proteins can be expressed as soluble forms by simply lowering temperature to 6-10°C without cold adapted chaperon systems. By using E. coli Rosetta-gami2(DE3), we obtained 1.8 and 0.9mg of Cryptopygus antarticus mannanase (CaMan) and cellulase (CaCel) from 1l culture grown at 6 and 10°C, respectively. Cultivation at 10°C also led to successful expression of EM3L7 (a lipase isolated from a metagenomic library) in a soluble form in E. coli BL21(DE3). Consequently, E. coli cultivation at 6-10°C is an effective strategy for overcoming a major hurdle of the inclusion body formation.     

Enabling high-throughput ligation-independent cloning and protein expression for the family of ubiquitin specific proteases

High-throughput methods to produce a large number of soluble recombinant protein variants are particularly important in the process of determining the three-dimensional structure of proteins and their complexes. Here, we describe a collection of protein expression vectors for ligation-independent cloning, which allow co-expression strategies by implementing different affinity tags and antibiotic resistances. Since the same PCR product can be inserted in all but one of the vectors, this allows efficiency in versatility while screening for optimal expression strategies. We first demonstrate the use of these vectors for protein expression in Escherichia coli, on a set of proteins belonging to the ubiquitin specific protease (USP) Family. We have selected 35 USPs, created 145 different expression constructs into the pETNKI-His-3C-LIC-kan vector, and obtained 38 soluble recombinant proteins for 21 different USPs. Finally, we exemplify the use of our vectors for bacterial co-expression and for expression in insect cells, with USP4 and USP7 respectively. We conclude that our ligation-independent cloning strategy allows for high-throughput screening for the expression of soluble proteins in a variety of vectors in E. coli and in insect cells. In addition, the same vectors can be used for co-expression studies, at least for simple binary complexes. Application in the family of ubiquitin specific proteases led to a number of soluble USPs that are used for functional and crystallization studies.     

Removal of DnaK contamination during fusion protein purifications

The use of fusion proteins for recombinant protein expression in Escherichia coli has become popular because the carrier increases protein solubility, standardizes expression levels, and facilitates purification of the fusion products. However, we have observed that the peptide regions that fuse the carrier to the protein of interest bind E. coli Hsp70 molecular chaperones (DnaK) depending on their amino acid composition, resulting in an unwanted contamination during protein purification. Here we describe an approach that helps to circumvent this unwanted contamination. First, the appropriate amino acids surrounding and comprising the cloning site are chosen by using a software based on an algorithm already developed to decrease to a minimum the propensity of the fusion protein to bind DnaK. Second, DnaK contamination is significantly reduced by washing the fusion protein bound to the purification resin with MgATP plus soluble denatured E. coli proteins before elution. The approach can also be applied to eliminate other molecular chaperones.     

A comparison of inoculation methods to simplify recombinant protein expression screening in Escherichia coli

In the past five years, Structural Genomics (SG) initiatives have established an automated pipeline for protein production in Escherichia coli to rapidly screen various conditions, resulting in soluble expression of recombinant proteins to aid in carrying out structural studies. However, some steps of the procedure are still extensive and require manual handling. Here, we present a comparative study of one step of the process, E. coli cultivation, using a set of 12 expression vectors encoding for fusion proteins of seven independent target proteins. First, we show that performing E. coli growth in auto-inducible medium (ZYM-5052) results in a comparable protein expression/solubility profile to that obtained when growing cells in classical Luria-Bertani (LB) medium. Second, we show that the transformation mix can be used directly to inoculate a culture, saving time and circumventing the error-prone step of colony picking, without impairing cell growth and the protein expression/solubility profile. Thus, we show that a basic, but nevertheless essential, step of a protein production pipeline, E. coli cultivation, can be simplified to a single event that is fully compatible with complete automation.     

Affinity purification of insoluble recombinant fusion proteins containing glutathione-S-transferase

Prokaryotic expression of polypeptides as fusion proteins with glutathione-S-transferase has recently been reported as a one-step means of purifying recombinant protein. The usefulness of the glutathione-S-transferase/glutathioneagarose system, however, is significantly limited by the frequent synthesis of recombinant proteins in insuluble form by Escherichia coli. We have found that for 5 separate fusion proteins containing glutathione-S-transferase and different domains of the large cystic fibrosis transmembrane conductance regulator, all were packaged in insoluble form by E. coli. Insolubility of these products made them inaccessible to one-step purification utilizing this scheme requires proper folding of recombinant glutathione-S-transferase to allow recognition on glutathione affinity agarose, we investigated the suitability of several alternative approaches for converting insoluble recombinant fusion proteins to a soluble form amenable to glutathione-agarose affinity purification. Low-temperature induction of fusion protein synthesis, but not incubation with anion-exchange resins, led to improved one-step purification of glutathione-S-transferase fusion proteins from E. coli cell lysate using mild, nondenaturing conditions. Solubilization in 8 mol/L urea, but not with other chaotropic agents or detergents, also allowed preparative yields of affinity-purified fusion protein. These techniques increase the usefulness of this recombinant protein purification scheme, and should be broadly applicable to diverse polypeptides synthesized as fusions with glutathione-S-transferase.