新型α-芋螺毒素基因克隆的引物筛选

目的:优化PCR条件,建立能特异扩增出α-芋螺毒素基因片段的最理想PCR条件.方法:根据α-芋螺毒素基因保守的信号肽或内含子序列和非翻译区保守核苷酸序列设计了多组特异引物,并对引物浓度和退火温度等影响因素进行优化.结果:根据α-芋螺毒素基因保守的内含子序列为引物、引物浓度为0.1 μmol/L、退火温度为50℃时,能特异的扩增出α-芋螺毒素基因片段,分子量大约分别为180bp和300bp.结论:采用优化的PCR条件,能筛选出克隆新型的α--芋螺毒素基因片段的最理想引物,为α-芋螺毒素的化学合成、活性研究和应用提供基础.     

长片段融合PCR在构建烟曲霉rho1基因回补株中的应用

目的融合PCR是一种常用的构建重组片段或重组质粒的手段,但长片段融合PCR的难度较大。文中将探讨长片段融合PCR过程中引物设计及扩增条件对产物的影响。方法以构建烟曲霉rho 1基因回补株为例,采用融合PCR的方法扩增重组片段(长达6.5 kb),在引物设计时引入不同大小的同源区,并设置不同的扩增体系。结果当设计引物的同源区为35 bp,选用具有高扩增效率、高保真性的DNA聚合酶,以及各片段在融合PCR反应体系中的浓度为15 ng/μL时,实现了长达6.5 kb的片段扩增并完成了烟曲霉rho 1回补株的构建。结论在合适的PCR引物设计、片段浓度配比及聚合酶条件下,长片段融合PCR在丝状真菌的基因敲除及回补株的构建中是一种非常有效的工具。     

利用PCR技术构建体外高效转录系统

设计并合成了一对 PCR 反应引物,其5′端引物除含有目的基因5′端序列外,还外加 T7 RNA 聚合酶启动子的17个核苷酸.3′端引物则按常规设计.以染色体 DNA为模板,通过 PCR,可扩增出带有 T7 RNA 聚合酶启动子的目的基因 DNA 片段.以此 PCR 产物为模板,在体外成功实现了高效转录.这是一种快速、简便构建体外高效转录系统的好方法.     

用两步PCR法克隆全长cDNA

采用两步 PCR法成功地克隆了一个全长的 c DNA.首先 ,用差式分析法克隆得到差别表达的 c DNA片段 ,再分别用这些片段内部的特异序列及 c DNA两端不同接头的序列为引物进行第一步 PCR扩增 ,得到差别 c DNA片段的上游和下游序列 .然后 ,根据第一步 PCR扩增得到的上游和下游序列设计基因特异的引物进行第二步 PCR,从而得到全长的 c DNA.     

采用苯酚羟化酶基因特异引物检测苯酚降解菌

根据苯酚羟化酶基因高度保守序列设计了一对该基因的特异PCR引物。采用该特异引物从苯酚降解菌醋酸钙不动杆菌 (Acinetobactercalcoaceticus)PHEA 2的总DNA中扩增到唯一一条大小为 684bp的片段。该DNA片段与已知的A .calcoaceticusNCIB82 50的苯酚羟化酶基因具有高度的同源性 ,其核苷酸序列的同源性为 84% ,推导的氨基酸序列的同源性为 98%。对苯酚和非苯酚降解菌株的PCR扩增结果表明 :所有苯酚降解菌均能扩增出 684bp的特征片段 ,而非苯酚降解菌则无PCR条带。对炼焦废水中的细菌群落进行PCR扩增和生化特性检测表明 :显示 684bp特征片段的菌株均具有苯酚降解特性。上述结果表明 ,利用苯酚羟化酶基因的特异引物可对环境中的苯酚降解菌株进行准确快速的PCR检测。     

雄牛特异的SRY同源序列的扩增和分析

利用人、兔、鼠SRY序列设计引物,应用PCR扩增牛的SRY序列,获得200bp的雄牛特异的扩增片段。克隆该扩增片段,获得重组质粒pCH21,进行序列分析,并与人、兔和鼠SRY的对应区域比较,具有高度同源性。用pCH21 DNA作探针与牛的基因组DNA酶切图谱杂交,显示了雄牛特异的I．7kb的杂交带。分析200bp的PCR扩增片段是牛的SRY基因片段。用同一对引物扩增人和山羊的DNA样品,也获得雄性特异的200bp的扩增片段。     

基因结构分析软件对实时定量PCR引物进行设计和筛选

目的：以人丝裂原活化蛋白激酶3(mitogen-activated protein kinase 3, ) 基因结构为例,利用不同生物相关软件分析、 设计和筛选合适的定量PCR 引物。方法：利用NCBI 的Gene 数据库查找人基因的参考序列、UniGene 数据库查找标准 参考序列;并用在线软件如Spidey, UCSC, Ensembl 等分析基因结构;利用Primer3,Oligo6,IDT 等软件进行引物设计;用MFOLD 程序分析基因二级结构后,选择引物可定位的外显子位置;利用电子PCR进行引物扩增特异性的检验;最后通过实验检验引物的 扩增效果。结果：从程序软件推荐的引物列表中筛选出一对能特异扩增人基因的引物。结论：基因结构分析软件有助于定 量PCR 引物的设计。     

简并PCR结合RACE技术克隆申克孢子丝菌未知过氧化氢酶基因

目的 克隆孢子丝菌未知过氧化氢酶基因,命名为Sscat基因.方法 根据生物信息库中7种已知真菌过氧化氢酶氨基酸序列的高度保守区域设计简并引物,PCR扩增获得部分Sscat基因cDNA片段,随后应用RACE技术分别扩增其3’端和5’端未知序列.结果 Sscat基因cDNA序列全长1746 bp,其中包括5’端121 b...     

转基因大豆非同源对照模板QC-PCR检测方法的建立

建立了转基因大豆CP4EPSPS基因的非同源对照模板QC-PCR检测方法。非同源竞争对照构建方法如下:利用CP4EPSPS基因特异引物,以大肠杆菌基因组DNA为异源模板,在低严谨度PCR扩增,回收适宜DNA片段并克隆到pMD-8载体上。该片段与CP4EPSPS基因相应序列除两端引物序列完全相同外,其他部分没有同源性。     

两种缢蛏线粒体基因全序列扩增方法的比较

介绍了应用长PCR技术扩增缢蛏线粒体全序列的两种方法,并进行了比较.一种方法是使用通用引物扩增COI基因和16S基因并测序后,在两基因的两端分别设计两对引物扩增两基因中间的大片段,分别得到了9.7 kb和7.3 kb的扩增产物.另一种方法是在COI基因序列两端设计一对引物,扩增整个线粒体全序列,得到了17.1 kb的扩增产物.两种方法在缢蛏的研究中进行比较后发现,前一种方法在操作实用性和后期测序方面都比后者好.     

PCR引物特异性核查系统(PSC)的构建与应用

聚合酶链式反应(PCR)虽已广泛用于分子生物学研究中,然而PCR实验中的非特异性产物问题将直接影响PCR的效率,在多重PCR实验中更是如此。为了最大限度地降低非特异性产物的出现率,同时避免用户频繁使用Blast比对检查非特异性,我们开发了基于NCBI-Blast的引物评估和模板DNA特异性结合能力评估的核查系统PSC(Primer Specificity Checking,http://biocompute.bmi.ac.cn/PSC),并基于虚拟PCR实验确定了用于引物质量核查计算的多种参数,能够在线提供多个物种的引物特异性核查结果。该系统可以有效地对引物序列可能产生的所有非特异性扩增进行预测,有助于实验前引物优化或者对非特异扩增结果进行解释,最终达到提高PCR效率的目的。     

Detection and differentiation of Colletotrichum gloeosporioides isolates using PCR

An oligonucleotide primer (CgInt), synthesised from the variable internally transcribed spacer (ITS) 1 region of ribosomal DNA (rDNA) of Collectotrichum gloeosporioides was used for PCR with primer ITS4 (from a conserved sequence of the rDNA) to amplify a 450-bp fragment from the 25 C. gloeosporioides isolates tested. This specific fragment was amplified from as little as 10 fg of fungal DNA. A similar sized fragment was amplified from DNA extracted from C. gloeosporioides-infected tomato tissue. RAPD analysis divided 39 C. gloeosporioides isolates into more than 12 groups linked to host source and geographic origin. Based on the results obtained, the potential of PCR for detection and differentiation of C. gloeosporioides is discussed.     

Methodology for using a universal primer to label amplified DNA segments for molecular analysis

Detection of human DNA polymorphisms using high throughput methods often relies on generating a labeled DNA fraament which is generated by PCR using sequence-specific primers with an end labeled tag to detect a variant. The disadvantage of the synthesis of an end-labeled, sequence-specific primer to assay each DNA variant lies in the costs and time consume. In this report, we have demonstrated a methodology that can generate labeled DNA fragments using a labeled universal primer instead of requiring sequence-specific primers for each DNA variant.     

MethyScan：一种甲基化特异性PCR引物设计及评估工具

DNA甲基化是重要的表观遗传现象,对基因表达发挥重要调控功能.大量研究表明,基因DNA甲基化是重要的临床诊断生物标志物.在临床上,实施快速、准确的DNA甲基化状态检测是诊断应用的前提和关键.甲基化特异性PCR(methylation specific PCR,MSP)通过将两种引物与甲基化、非甲基化模板各自特异性结合和扩增,实现基因甲基化状态的区分,是切实可行、简单便捷的临床诊断实验技术.但是,不同于常规PCR,MSP主要存在如何强化引物-甲基化/非甲基化模板特异性结合、降低引物序列Tm值差异、去除假阳性扩增及提高敏感性等四大难点.尽管大多数MSP引物设计软件对上述难题都提出了各自解决办法,但在引物设计影响因素考虑、设计与评估并行处理及特异性扩增预测等方面仍然存在较大缺陷.为此,本研究通过对MethPrimer、MSPPrimer、MethBlast、BiSearch等现有MSP引物设计软件原理的深入探究,以及对Bowtie、SAMtools和BEDTools等工具的有效综合整合,基于图形库Matplotlib和第三方Python功能库BioPython与Primer3-py实现了具有系列优点的甲基化特异性PCR引物设计与评估可视化工具MethyScan.它具有引物设计、基因组索引、引物评估等三大完整功能模块,不仅可快速进行MSP引物设计,实现巢式(Nested)引物适配,还可基于4种基因组碱基转换模板分析引物结合信息,图形化展示非特异性扩增与目的片段差异,从而综合评估引物特异性-非特异性扩增.同时,对食管癌、结直肠癌等多种恶性肿瘤中6个潜在生物标志物TFPI-2、NDRG4、CDKN2A、CD44、CASP8和SDHD的甲基化引物设计对比结果表明,MethyScan不仅可获得更多CpG位点的检测引物,而且所获得MSP引物位置与其他软件结果相同或相近,且引物间Tm值差值更小.总之,作为首个图形化展示特异性-非特异性扩增差异MSP引物设计工具,MethyScan可有效提高甲基化引物设计准确性,为临床DNA甲基化检测项目开展、检测试验实施及诊断试剂盒研发提供有力支撑.MethyScan工具下载地址:https://github.com/bioinfo-ibms-pumc/MethyScan.     

ITS primers with enhanced specificity for basidiomycetes - application to the identification of mycorrhizae and rusts

We have designed two taxon-selective primers for the internal transcribed spacer (ITS) region in the nuclear ribosomal repeat unit. These primers, ITS1-F and ITS4-B, were intended to be specific to fungi and basidiomycetes, respectively. We have tested the specificity of these primers against 13 species of ascomycetes, 14 of basidiomycetes, and 15 of plants. Our results showed that ITS4-B, when paired with either a 'universal' primer ITS1 or the fungal-specific primer ITS1-F, efficiently amplified DNA from all basidiomycetes and discriminated against ascomycete DNAs. The results with plants were not as clearcut. The ITS1-F/ITS4-B primer pair produced a small amount of PCR product for certain plant species, but the quantity was in most cases less than that produced by the 'universal' ITS primers. However, under conditions where both plant and fungal DNAs were present, the fungal DNA was amplified to the apparent exclusion of plant DNA. ITS1-F/ITS4-B preferential amplification was shown to be particularly useful for detection and analysis of the basidiomycete component in ectomycorrhizae and in rust-infected tissues. These primers can be used to study the structure of ectomycorrhizal communities or the distribution of rusts on alternate hosts.     

裸子植物DNA条形码ITS2高通用性引物的筛选

DNA条形码技术是利用标准DNA片段进行准确快速鉴定物种的一种方法,理想的DNA条形码片段应具有高通用性。虽然核糖体DNA内部转录间隔区II（ITS2）被建议作为种子植物有效的DNA条形码,但目前裸子植物还没有通用性高的引物可用。为获得高通用性的ITS2引物,本研究基于裸子植物55个属的5．8S基因的保守序列区设计了3个正向引物,与已有的ITS反向引物组合,组成了7对ITS2引物进行通用性的评价。选取了裸子植物8目、12科和40属的56个种用于本文的研究。引物组合5．8SR／ITS4、5．8SRa／ITS4和5．8SF2／S3R因为在科水平评价中通用性低或者产生的PCR产物有双带,因而排除在全部物种水平上进一步评价。其余4对引物（GYM-5．8SF1／ITS4、GYM-5．8SFl／S3R、GYM-5．8SF2／ITS4和S2F／S3R）在56个物种的PCR检测中,均有100％的扩增率。基于PCR产物的亮度、序列质量和正反向引物覆盖率的综合评价,建议引物GYM_5．8SF2／ITS4作为裸子植物条形码片段ITS2最好的通用引物。     

Presymptomatic and quantitative detection of Mycosphaerella graminicola development in wheat using a real-time PCR assay

Presymptomatic and accurate diagnosis of Mycosphaerella graminicola leaf blotch is desirable for the disease prediction and the timely application of fungicides. To develop a sensitive PCR assay, four specific primer pairs were designed. They were more specific than three known specific primer pairs. Three of them could detect as little as 0.5 pg M. graminicola DNA in a conventional PCR. A real-time PCR assay was applied for monitoring the disease progression in both inoculated and naturally infected wheat plants using the primer pair ST-rRNA F/R. In inoculated plants, M. graminicola DNA could be detected immediately after inoculation and a steady increase was detected before visible symptoms appeared at 8 days. The rapid growth period took place between 6 and 16 days postinoculation. In the field, the disease progression in the top three leaf layers was followed during the epidemic period. The results were significantly correlated to the disease indices (R=0.8986) and also to the number of pycnidia per leaf (R=0.9227). These suggest that the real-time PCR assay is a reliable approach for the presymptomatic and accurate detection of M. graminicola development in the field.     

随机引物在分子生物学研究中的应用

随机引物指非特异序列的寡聚核苷酸作为DNA合成过程中的引物, 是相对于特异引物的概念.90年代它与PCR技术结合衍生了几项新技术:采用不同长度随机引物进行DNA指纹分析而衍生出的RAPD、AP-PCR及DAF方法; 进行mRNA多态分析的“差异显示”; 以及rPCR, T-PCR等技术. 以RAPD为例介绍了随机引物PCR的技术特点及其在分子生物学研究中的应用.     

MethPrimer: designing primers for methylation PCRs

MOTIVATION: DNA methylation is an epigenetic mechanism of gene regulation. Bisulfite- conversion-based PCR methods, such as bisulfite sequencing PCR (BSP) and methylation specific PCR (MSP), remain the most commonly used techniques for methylation mapping. Existing primer design programs developed for standard PCR cannot handle primer design for bisulfite-conversion-based PCRs due to changes in DNA sequence context caused by bisulfite treatment and many special constraints both on the primers and the region to be amplified for such experiments. Therefore, the present study was designed to develop a program for such applications. RESULTS: MethPrimer, based on Primer 3, is a program for designing PCR primers for methylation mapping. It first takes a DNA sequence as its input and searches the sequence for potential CpG islands. Primers are then picked around the predicted CpG islands or around regions specified by users. MethPrimer can design primers for BSP and MSP. Results of primer selection are delivered through a web browser in text and in graphic view.