Modification of cellulosic fabric using polyvinyl alcohol, part-II: Colorfastness properties

A series of aqueous solutions of poly(vinyl alcohol) of various commercial products were prepared and applied onto the surfaces of cotton and blends of cotton/polyester fabrics. Fourier transform infrared spectrophotometer was used to confirm the molecular structure of the polyvinyl alcohol used. Performance tests such as colorfastness to rubbing (dry and wet) and colorfastness to washing were determined. The controlling variables affecting the performance properties of the finished substrate such as post-treatment with poly(vinyl alcohol) of various commercial trades, concentration and dilutions were studied. Crocking, washing and hue change of the treated dyed and printed fabrics is accompanied by the formation of semi-inter-penetrated network structure due to the presence of the hydroxyl (-OH) groups which make feasible to a number of grafting and physical cross linking reactions of polymer backbone.     

Modification of chitosan membrane with poly(vinyl alcohol) and biocompatibility evaluation

This work aimed to overcome chitosan (CS) membrane' drawbacks: mainly stiffness and hydrophobic surface by adding poly(vinyl alcohol) (PVA) and evaluate their biocompatibility. The chemical structure, crystalline and thermal properties were studied by FT-IR, XRD and DSC. The mechanical properties and wettability of CS/PVA membranes were studied by tensile test and static contact angle measurement. In vitro biocompatibility was also evaluated by MTS cytotoxicity assay and SEM examination. The results suggest that adding PVA into CS membrane could greatly improve CS membrane's flexibility and wettability. All the membranes prepared were biocompatible and have potential applications in GTR technology.     

Endotoxin removal with poly(ethyleneimine)-immobilized adsorbers: Sepharose 4B versus flat sheet and hollow fibre membranes

Poly(ethyleneimine) was immobilized on poly(vinyl alcohol)-coated nylon flat sheet membranes, poly(vinyl alcohol) and poly(ethylenevinyl alcohol) hollow fibre membranes as well as Sepharose 4B. The resulting poly(ethyleneimine)-immobilized adsorbers were used for removal of E. coli derived endotoxin from buffers and bovine serum albumin solutions. The efficiency of poly(ethyleneimine) proved to be constant over a wide pH range, including phosphate buffered saline. The performance depended upon the matrix type employed: endotoxin clearance factors varied from 100 to 120 000 in protein-free solutions and 40 to 33 000 in solutions of bovine serum albumin using 6000 EU/ml as feed concentration. The best adsorber was the flat sheet membrane-immobilized poly(ethyleneimine), followed by the hollow fibre-immobilized poly(ethyleneimine) and poly(ethyleneimine)-Sepharose. The factors influencing endotoxin clearance were the mass transport (convective systems were superior to the diffusive system), the chemical composition and the surface structure of the underlying matrix.     

Preparation of rich handles soft cellulosic fabric using amino silicone based softener. Part-I: Surface smoothness and softness properties

A series of amino silicone based softeners with different emulsifiers were prepared and adsorbed onto the surfaces of cotton and blends of cotton/polyester fabrics. Factors affecting the performance properties of the finished substrate such as post-treatment with amino functional silicone based softener varying different emulsifiers in their formulations and its concentration on different processed fabrics were studied. Fixation of the amino-functional silicone softener onto/or within the cellulose structure is accompanied by the formation of semi-inter-penetrated network structure thereby enhancing both the extent of crosslinking and networking as well as providing very high softness. The results of the experiments indicate that the amino silicone can form a hydrophobic film on both cotton and blends of cotton/polyester fabrics and its coating reduces the surface roughness significantly. Furthermore, the roughness becomes lesser with an increase in the applied strength of amino silicone based softener.     

Synthesis of antibacterial PVA/CM-chitosan blend hydrogels with electron beam irradiation

A series of excellent hydrogels were prepared from poly(vinyl alcohol) (PVA) and carboxymethylated chitosan (CM-chitosan) with electron beam irradiation (EB) at room temperature. Electron spectroscopy analysis of the blend hydrogels revealed that good miscibility was sustained between CM-chitosan and PVA. The properties of the prepared hydrogels, such as the mechanical properties, gel fraction and swelling behavior were investigated. The mechanical properties and equilibrium degree of swelling improved obviously after adding CM-chitosan into PVA hydrogels. The gel fraction determined gravimetrically showed that a part of CM-chitosan was immobilized onto PVA hydrogel. The further analyses of FTIR and DSC spectra of the prepared gels after extracting sol manifested that there was a grafting interaction between PVA and CM-chitosan molecules under irradiation. The antibacterial activity of the hydrogels against Escherichia coli was also measured via optical density method. The blend hydrogels exhibited satisfying antibacterial activity against E. coli, even when the CM-chitosan concentration was only 3 wt%.     

Preparation and characterization of wet spun silk fibroin/poly(vinyl alcohol) blend filaments

Silk fibroin (SF)/poly(vinyl alcohol) (PVA) blend filaments were prepared by a wet spinning process. Regenerated SF and PVA were dissolved in formic acid and the dope solution exhibited good fiber formation in a methanol coagulation bath. Due to the miscibility of SF/PVA in formic acid, the filament had a smooth surface and dense structure with a circular cross-section. The crystalline structure and thermal properties were varied with different SF/PVA ratios. The mechanical properties of the filament were also controlled by blending PVA with SF. Especially, the knot strength of the SF filament, which is a very important suture property, could be significantly improved by blending with PVA.     

Non-mulberry silk sericin/poly (vinyl alcohol) hydrogel matrices for potential biotechnological applications

This study reports a novel biopolymeric matrix fabricated by chemically cross-linking poly (vinyl alcohol) with silk sericin protein obtained from cocoons of the tropical tasar silkworm Antheraea mylitta. Glutaraldehyde was used as a cross-linking agent with hydrochloric acid acting as an initiator. The matrices were biophysically characterized and the cytocompatibility of the matrices was evaluated for their suitability as biomaterials. The surface morphology was assessed using atomic force microscopy while the changes taking place after cross-linking were confirmed by Fourier transform infrared spectroscopy. The enhanced thermal stability of the constructs was assessed by thermogravimetric and differential scanning calorimetry. Fourier transform infrared spectroscopy analysis showed that sericin was chemically cross-linked with poly (vinyl alcohol) using glutaraldehyde. Silk sericin protein demonstrated a favorable effect on animal cell culture by successfully improving the adhering and spreading of cells on the poorly adhering surface of poly (vinyl alcohol). Confocal microscopy revealed cell spreading and actin filament development in sericin/poly (vinyl alcohol) hydrogel matrices. These findings prove the potential of non-mulberry silk sericin/poly (vinyl alcohol) hydrogel matrices to be used as biocompatible and biopolymeric material for tissue-engineering and biotechnological applications.     

Activity and Stability of Native and Modified Subtilisins in Various Media

The activity and stability of native subtilisin 72, its complex with poly(acrylic acid), and subtilisin covalently attached to poly(vinyl alcohol) cryogel were studied in aqueous and organic media by hydrolysis of specific chromogenic peptide substrates. Kinetic parameters of the hydrolysis of Glp-Ala-Ala-Leu-pNA by native subtilisin and its complex with poly(acrylic acid) were determined. Based on the comparative study of stability of native and modified subtilisins in media of various compositions, it was established that covalent immobilization of subtilisin on poly(vinyl alcohol) cryogel is the most effective approach to improve enzyme stability in water as well as in mixtures with low water content.     

Preparation, characterization, and properties of chitosan-g-poly(vinyl alcohol) copolymer

The graft copolymer chitosan-g-poly(vinyl alcohol), with nontoxicity, biodegradability, and biocompatibility, was prepared by a novel method. The copolymer with porous net structure was observed by scanning electron microscopy (SEM). It is a potential method to combine chitosan with the synthetic polymers. The grafting reactions were conducted with various poly(vinyl alcohol) (PVA)/6-O-succinate-N-phthaloyl-chitosan (PHCSSA) feed ratios to obtain chitosan-g-poly(vinyl alcohol) copolymers with various PVA contents. The chemical structure of the chitosan-g-poly(vinyl alcohol) was characterized by Fourier transform infrared and nuclear magnetic resonance (NMR) spectroscopy. Differential scanning calorimetry (DSC), X-ray diffraction (XRD), and SEM were also detected to characterize the copolymer.     

Hydrogels for an accommodating intraocular lens. An explorative study

In this study it was investigated whether hydrogels could be used for an accommodating lens. The requirements of such a hydrogels are a low modulus, high refractive index, transparency, and strength. Since conventional hydrogels do not possess this combination of properties, a novel preparation method and new polymers are introduced. As starting materials poly(1-hydroxy-1,3-propanediyl), poly(ethylene-co-vinyl alcohol), poly(vinyl alcohol), and poly(allyl alcohol) were used. The first three were cross-linked with a number of diisocyanate compounds. Network formation was performed at low concentrations in a good solvent. Mixing of the polymer solution and cross-linker appeared to be crucial for transparency. Poly(1-hydroxy-1,3-propanediyl), cross-linked with a slow reacting diisocyanate block, shows the most promising properties with respect to refractive index, transparency, tensile strength, and modulus. Poly(allyl alcohol) hydrogel was made by compression molding. The hydrogel was transparent and had a high refractive index and low modulus. It was concluded that hydrogels could be used as accommodating lens material.     

Preparation and evaluation of polyvinyl alcohol-co-oleylvinyl ether derivatives as tumor-specific cytotoxic systems

A series of poly(vinyl alcohol) amphiphilic derivatives have been prepared to obtain polymeric aggregates in aqueous phase holding thermodynamic instability. The aim was to evaluate their ability to interact with tumor cells eliciting selective cytotoxicity. The poly(vinyl alcohol) derivatives were prepared by partial substitution of poly(vinyl alcohol) (MW 10 kDa) with both oleyl chains and poly(ethylene glycol) monoethyl ethers (PEGMEE) of different molecular weights. The substitution degree was 1.5% for the oleyl chains and 1% for the PEGMEE chains (moles of substituent per 100 mol of hydroxyvinyl monomer). The polyvinyl derivatives obtained easily dissolved in water. Dynamic and static light scattering measurements on the polymer aqueous solutions indicated the formation of polymeric aggregates characterized by low polydispersity (0.232-0.299) and mean size (218-382 nm) in the range suitable for intravenous administration. Moreover, they were characterized by different packing densities and thermodynamic instabilities driving the polymers to interact with hydrophobic membranes. Among the analyzed polymers, the poly(vinyl alcohol)-co-oleylvinyl ether substituted with triethylene glycol monoethyl ether (P10(4)) provided in solution the highest affinity for hydrophobic membranes. P10(4), moreover, was the most cytotoxic toward the tumor cell lines analyzed (neuroblastoma: SH-SY5Y, IMR-32, HTLA-230. melanoma: MZ2-MEL, RPMI7932.), while it did not appreciably alter the viability of the normal resting lymphocytes. The peculiar behavior of the P10(4) aggregates has been correlated to their high thermodynamic instability in solution due to the high packing density that triggers the polymeric aggregates to interact with hydrophobic membranes such as the tumor cell membranes, thus eliciting cytotoxicity.     

Purification and Characterization of an Esterase Involved in Poly(vinyl alcohol) Degradation by Pseudomonas vesicularis PD

An esterase catalyzing the hydrolysis of acetyl ester moieties in poly(vinyl alcohol) was purified 400-fold to electrophoretic homogeneity from the cytoplasmic fraction of Pseudomonas vesicularis PD, which was capable of assimilating poly(vinyl alcohol) as the sole carbon and energy source. The purified enzyme was a homodimeric protein with a molecular mass of 80 kDa and the isoelectric point was 6.8. The pH and temperature optima of the enzyme were 8.0 and 45°C. The enzyme catalyzed the hydrolysis of side chains of poly(vinyl alcohol), short-chain p-nitrophenyl esters, 2-naphthyl acetate, and phenyl acetate, and was slightly active toward aliphatic esters. The enzyme was also active toward the enzymatic degradation products, acetoxy hydroxy fatty acids, of poly(vinyl alcohol). The K _m and V _max of poly(vinyl alcohol) (degree of polymerization, 500; saponification degree, 86.5-89.0 mol%) and p-nitrophenyl acetate were 0.381% (10.6 mM as acetyl content in the polymer) and 2.56 μM, and 6.52 and 12.6 μmol/min/mg, respectively. The enzyme was strongly inhibited by phenylmethylsulfonyl fluoride and diisopropyl fluorophosphate at a concentration of 5 mM, which indicated that the enzyme was a serine esterase. The pathway for the metabolism of poly(vinyl alcohol) is also discussed.     

Influence of the backbone structure on the release of bioactive volatiles from maleic acid-based polymer conjugates

Poly(maleic acid monoester)-based β-mercapto ketones were synthesized and investigated as potential delivery systems for the controlled release of bioactive, volatile, α,β-unsaturated enones (such as damascones and damascenones) by retro 1,4-addition. The bioconjugates were prepared in a one-pot synthesis using 2-mercaptoethanol as a linker. The thiol group of 2-mercaptoethanol adds to the double bond of the enone to form a β-mercapto ketone, which was then grafted via nucleophilic ring-opening of the remaining alcohol function onto a series of alternating copolymers of maleic anhydride and 1-octadecene, ethylene, isobutylene, and methyl vinyl ether. The influence of copolymer backbones on the release of δ-damascone was investigated in buffered aqueous solution as a function of pH and time. In the presence of a cationic surfactant, the polymer conjugates were transferred from an aqueous medium to a cotton surface. The deposition and the release of δ-damascone from the cotton surface as a function of the polymer backbone structure were measured by fluorescence spectroscopy and dynamic headspace analysis, respectively. All polymer conjugates were found to deliver higher amounts of the volatile into the headspace than the reference consisting of unmodified δ-damascone. Polymers with a hydrophobic backbone were generally efficiently deposited on the cotton surface, but released δ-damascone only moderately in solution. Conjugates with a more hydrophilic backbone release the active compound more efficiently in water, but are deposited to a lower extent onto the target surface. A good balance of the hydrophobicity and hydrophilicity of the polymer backbone is the key factor to maximize the deposition of the conjugates on the target surface and to optimize the release of the bioactive volatiles.     

Compatible ternary blends of chitosan/poly(vinyl alcohol)/poly(lactic acid) produced by oil-in-water emulsion processing

Ternary compatible blends of chitosan, poly(vinyl alcohol), and poly(lactic acid) were prepared by an oil-in-water (O/W) emulsion process. Solutions of chitosan in aqueous acetic acid, poly(vinyl alcohol) (PVA) in water, and poly(lactic acid) (PLA) in chloroform were blended with a high-shear mixer. PVA was used as an emulsifier to stabilize the emulsion and to reduce the interfacial tension between the solid polymers in the blends produced. It proved to work very well because the emulsions were stable for periods of days or weeks and compatible blends were obtained when PVA was added. This effect was attributed to a synergistic effect of PVA and chitosan because the binary blends PVA/PLA and chitosan/PLA were completely incompatible. The blends were characterized by scanning electron microscopy (SEM), differential scanning calorimetry (DSC), thermal mechanical analysis (TMA), stress-strain tests, and Fourier transform infrared spectroscopy (FTIR). The results indicated that despite the fact that the system contained distinct phases some degree of molecular miscibility occurred when the three components were present in the blend.     

Preparation of single or double-network chitosan/poly(vinyl alcohol) gel films through selectively cross-linking method

A selectively cross-linking method, which is based on the “di–diol” interaction between poly(vinyl alcohol) and borate and the strong electrostatic interaction between chitosan and tripolyphosphate, was developed. Chitosan/poly(vinyl alcohol) films cross-linked separately with borate, tripolyphosphate and borate/tripolyphosphate were then prepared in terms of this method. Water vapor permeation, mechanical strength, surface morphology and molecular interactions of the films were studied by water permeation test, texture test, atomic force microscopy and ATR-FTIR spectroscopy. With the introduction of cross-linking structure, there is a large improvement in elastic modulus from 271 ± 14.2 to 551 ± 14.7 MPa and a large decrease in water vapor permeability from (5.41 ± 0.21) × 10⁻⁷ g/m h Pa to (3.12 ± 0.24) × 10⁻⁷ g/m h Pa of chitosan/poly(vinyl alcohol) films. The surface morphology of the cross-linked films exhibits a nanoparticle aggregation structure. The size and aggregation behavior of these nanoparticles are strongly related to the type of cross-linker. Furthermore, ATR-FTIR results indicate that strong interaction between polymer matrix and cross-linker exists in our system. This work provides a simple and efficient way to prepare chitosan/poly(vinyl alcohol) films with controllable network structure.     

Transparent cellulose films with high gas barrier properties fabricated from aqueous alkali/urea solutions

Transparent and bendable regenerated cellulose films prepared from aqueous alkali (NaOH or LiOH)/urea (AU) solutions exhibit high oxygen barrier properties, which are superior to those of conventional cellophane, poly(vinylidene chloride), and poly(vinyl alcohol). Series of AU cellulose films are prepared from different cellulose sources (cotton linters, microcrystalline cellulose powder, and softwood bleached kraft pulp) for different dissolution and regeneration conditions. The oxygen permeabilities of these AU cellulose films vary widely from 0.003 to 0.03 mL μm m(-2) day(-1) kPa(-1) at 0% relative humidity depending on the conditions used to prepare the films. The lowest oxygen permeability is achieved for the AU film prepared from 6 wt % cellulose solution by regeneration with acetone at 0 °C. The oxygen permeabilities of the AU cellulose films are negatively correlated with their densities, and AU films prepared from solutions with high cellulose concentrations by regeneration in a solvent at low temperatures generally have low oxygen permeabilities. The AU cellulose films are, therefore, promising biobased packaging materials with high-oxygen barrier properties.     

An immobilized Thiobacillus thioparus biosensing system for monitoring sulfide hydrogen; optimized parameters in a bioreactor

A microbial biosensing system for detection of hydrogen sulfide has been developed by using immobilized Thiobacillus thioparus TK-m in poly vinyl alcohol matrix, together with a dissolved oxygen sensor. Parameters of immobilization (poly vinyl alcohol concentration and amount of wet cell) were optimized by using statistical software. The obtained values for concentration of poly vinyl alcohol and wet cell weight were 11.3% (w/v) and 45 mg, respectively, where the response time of biosensor was 80 s. Calibration of oxygen concentration based on hydrogen sulfide concentration was investigated between 1 mg/L and 20 mg/L. The effect of pH and temperature were investigated in specific range of experimental conditions as well. Some parameters including operational stability and detection limit were studied in detail for characterization of biosensing system. In order to determine the operational stability, bio-sensing system at optimized working conditions was used to distinguish viability of microorganisms in polymer beads in period of time.     

Characterization of porous PLGA/PLA microparticles as a scaffold for three dimensional growth of breast cancer cells

We have designed and evaluated biodegradable porous polymeric microparticles as a scaffold for cell growth. The hypothesis was that microparticles with optimized composition and properties would have better cell adhesion and hence cell growth into a tissue-like structure. Solvent-evaporation method was modified using sucrose as an additive to form large porous microparticles of poly(D,L-lactic-co-glycolic) (PLGA) and polylactide (PLA) polymers. Microparticles containing hydrophilic polymers (poly(vinyl alcohol) and chitosan) incorporated in their internal matrix structure were also formulated. Different formulations of microparticles were evaluated for physical properties, cell adhesion, and cell growth in culture. PLA microparticles containing poly(vinyl alcohol) (PVA) in the matrix structure (PLA-PVA) and treated with serum prior to cell seeding demonstrated better cell adhesion and cell growth than other formulations of microparticles. Cells were seen to grow into clumps, engulfing microparticles completely with time, and forming a 3-D tissue-like structure. Cell density of 1.5 x 10(6) cells per mg of microparticles was achieved in 9 days of culture, which was a 7-fold increase from the initial seeding cell density. The mechanism of better cell growth on PLA-PVA microparticles appears to be due to the PVA associated with the internal matrix structure of microparticles. These microparticles demonstrated better wetting in culture and also cell adhesion. In addition to tissue engineering applications, microparticles with cancer cells grown into a tissue-like structure in vitro can be potentially used as a model system for preclinical evaluation of the cytotoxic effect of anticancer agents.     

An enzyme-polymer film prepared with the use of poly(vinyl alcohol) bearing photosensitive aromatic azido groups

Photochemical reaction of poly(vinyl alcohol) bearing aromatic azido groups was applied for immobilization of beta-glucosidase (beta-D-glucoside glucohydrolase, EC 3.2.1.21.) in poly(vinyl alcohol) film. Photo-crosslinking and immobilization reactions proceeded by light irradiation for 25 min in air. The immobilized enzyme showed approx. 40% of its native enzyme activity with an apparent Michaelis constant of 3.9 mM. The Michaelis constant of the native enzyme was 2.3 mM. Some properties of the immobilized and native enzyme are compared.     

Hemoglobin and myoglobin embedded in dry poly(vinyl alcohol) film for X-ray absorption studies

Solid hemoprotein samples are prepared by embedding proteins in thin poly(vinyl alcohol) films. These film samples have several unique qualities: in the solid poly(vinyl alcohol) matrix, hemoproteins have the same properties as in frozen buffer solution (proven by optical absorption, ligand recombination kinetics and EXAFS); they are very stable, easy to store and resistant to radiation; damage; protein concentration can be as high as 15 mM; light transparency is as good as liquid solution samples; and they can be made as thin as 20 microns, so that 100% photolysis across a film, even with a high protein concentration, is easily achievable. The film samples are ideal for X-ray studies of optically illuminated hemoproteins.