Amphiphilic poly(vinyl alcohol) derivatives as complexing agents for fenretinide

Poly(vinyl alcohol) (PVA) substituted with oleyl chains and tetraethyleneglycol monoethyl ether chains (TEGMEE) at 1.5% and 1% degrees of substitution respectively (mol of substituent to mol of hydroxyvinyl monomer) has previously been shown to self-assemble in water, providing aggregates selectively cytotoxic toward tumor cells vs normal cells. These polymers have also been shown to increase the long-term survival of nude mice injected with both human and murine neuroblastoma cell lines. In the present work, we changed the substitution degree of the oleyl chains on the poly(vinyl alcohol) backbone and maintained constant at 1% the degree of TEGMEE substitution. We evaluated the main physicochemical characteristics of the final polymers, their cytotoxicity toward tumor cells, and their complexing ability for hydrophobic molecules. The aim was to investigate the possibility of improving intrinsic antitumor efficacy of the polymer by changing the degree of oleyl chain substitution and further increase activity by complexation with antitumor drugs. The polymers were prepared at oleyl chain substitution degrees ranging from 0.5 to 3% (mol of substituent to mol of hydroxyvinyl monomer). The most active was again the 1.5% substituted polymer. It was further characterized by exhibiting the highest complexing ability toward hydrophobic molecules allowing the formation of a complex with fenretinide (HPR). The polymer-HPR complex was stable in aqueous environment and released the free drug prevalently in the presence of fluid hydrophobic phases. It was cytotoxic toward tumor cells with minimal activity toward normal cells. Antitumor activity exceeded that of the separate complex components resulting from the concomitant effect of the polymer and the HPR solubilized by complexation.     

Protein fouling resistant membrane prepared by amphiphilic pegylated polyethersulfone

A mild and facile grafting of poly(ether glycol) methyl ether methacrylate (PEGMA) monomers onto polyethersulfone (PES) was carried out. Then, the PES-g-PEGMA membranes with integrally anisotropic morphology were fabricated through the coupling of non-solvent induced phase inversion and surface segregation. Compared with PES control membrane, the surface hydrophilicity of PES-g-PEGMA membranes was remarkably enhanced due to the drastic enrichment of poly(ethylene glycol) (PEG) segments on the membrane surface; protein adsorption was significantly inhibited due to the hydrogen bonding interactions between hydrophilic groups and water molecules. Ultrafiltration experiments were used to assess the permeability and protein fouling resistance of the PES-g-PEGMA membranes. It was found that the PES-g-PEGMA membranes with higher surface coverage of PEG segments displayed stronger antibiofouling property. Moreover, the stable antibiofouling property for PES-g-PEGMA membranes was acquired due to covalent bonding interactions between hydrophilic PEGMA side chains and PES main chains.     

Synthesis of biocompatible polymeric hydrogels with tunable adhesion to both hydrophobic and hydrophilic surfaces

We report the synthesis of biocompatible polymeric hydrogels based on poly(vinyl acetate) (PVAc) and poly(methyl vinyl ether-co-maleic anhydride) (PMVE-MA). These polymeric hydrogels show strong and tunable adhesion to both hydrophobic and hydrophilic surfaces and should be ideal candidates as bioadhesives for applications such as denture adhesion. PVAc was partially hydrolyzed and then mixed with PMVE-MA. Crosslinking between these two polymers through reactions between hydroxyl groups in partially hydrolyzed PVAc and maleic anhydride groups in PMVE-MA increased their compatibility and prevented phase separation so transparent hydrogels were formed. The adhesion of these polymeric hydrogels to hydrophobic and hydrophilic surfaces was tailored by regulating the degree of hydrolysis of PVAc and the molecular weights of the polymers. In the vicinity of critical gel point, where the elastic modulus G' and the viscous modulus G' scale as G' approximately G' approximately omega (0.3), polymeric hydrogels show optimal adhesion. Transparent gels are formed in mixed solvents of water and ethanol. The content of ethanol in the mixed solvent can be partially replaced by propylene glycol, glycerol, or poly(ethenyl glycol)-400, and the composition of appropriate mixed solvents can be determined by the calculation of solubility parameters.     

Spatially well-defined binary brushes of poly(ethylene glycol)s for micropatterning of active proteins on anti-fouling surfaces

We report a novel method for micropatterning of active proteins on anti-fouling surfaces via spatially well-defined and dense binary poly(ethylene glycol)s (PEGs) brushes with controllable protein-docking sites. Binary brushes of poly(poly(ethylene glycol) methacrylate-co-poly(ethylene glycol)methyl ether methacrylate), or P(PEGMA-co-PEGMEMA), and poly(poly(ethylene glycol)methyl ether methacrylate), or P(PEGMEMA), were prepared via consecutive surface-initiated atom transfer radical polymerizations (SI-ATRPs) from a resist-micropatterned Si(100) wafer surface. The terminal hydroxyl groups on the side chains of PEGMA units in the P(PEGMA-co-PEGMEMA) microdomains were activated directly by 1,1'-carbonyldiimidazole (CDI) for the covalent coupling of human immunoglobulin (IgG) (as a model active protein). The resulting IgG-coupled PEG microdomains interact only and specifically with target anti-IgG, while the other PEG microregions effectively prevent specific and non-specific protein fouling. When extended to other active biomolecules, microarrays for specific and non-specific analyte interactions with a high signal-to-noise ratio could be readily tailored.     

Polymer grafting onto starch nanocrystals

Monocrystalline starch nanoparticles were successfully grafted with poly(tetrahydrofuran), poly(caprolactone), and poly(ethylene glycol) monobutyl ether chains using toluene 2,4-diisocyanate as a linking agent. Surface grafting was confirmed using Fourier transform infrared and X-ray photoelectron spectroscopies, differential scanning calorimetry, elemental analysis, and contact angle measurements. Transmission electron microscopy observations of modified starch nanocrystals showed either the individualization of nanoparticles or the formation of a film, depending on the polymer used. It was shown that grafting efficiency decreased with the length of the polymeric chains, as expected. The resulting modified nanoparticles can find applications in the field of co-continuous nanocomposite materials.     

Translocation of CTP: phosphocholine cytidylyltransferase from cytosol to membranes in HeLa cells: stimulation by fatty acid, fatty alcohol, mono- and diacylglycerol

Addition of oleate, oleyl alcohol, or palmitate to HeLa cell medium resulted in a rapid stimulation of PC synthesis and activation of CTP: phosphocholine cytidylyltransferase. Stimulation was optimal with 0.35 mM oleate, 0.3 mM oleyl alcohol and 5 mM palmitate, or 1 mM palmitate if EGTA were added to the medium. The cytidylyltransferase was activated by translocation of the inactive cytosolic form to membranes. In untreated cells approx. 30% of the total cytidylyltransferase was membrane bound, while in treated cells, 80-90% was membrane associated. Addition of bovine serum albumin (10 mg/ml) to cells previously treated with oleate (0.35 mM) rapidly removed cellular fatty acid, and the membrane-bound cytidylyltransferase activity returned to approx. 30%. Similar results were obtained by extraction of membranes with albumin in vitro. Although 95% of the free fatty acid was extracted, 30-40% of the membrane cytidylyltransferase remained bound. Translocation of cytidylyltransferase between isolated cytosol and microsomal fractions was promoted by addition of oleate, palmitate, oleyl alcohol, and monoolein. Addition of diacylglycerol, lysophosphatidylcholine, lysophosphatidylethanolamine, calcium palmitate, and detergents such as Triton X-100, cholate or Zwittergent did not stimulate translocation of the enzyme. Addition of oleoyl-CoA promoited translocation, however, 40% of it was hydrolyzed releasing free oleic acid. Cytosolic cytidylyltransferase bound to microsomes pre-treated with phospholipase C, which had 7-fold elevated diacylglycerol content. Fatty acid-promoted translocation was blocked by Triton X-100, but not by 1 M KCl. These results suggest that a variety of compounds with differing head group size and charge, and number of hydrocarbon chains can function as translocators, and that hydrophobic rather than ionic interactions mediate the binding of cytidylyltransferase to membranes.     

Stimulation of ligninolytic enzyme production in Phanerochaete chrysosporium by polyoxyalkanes

AIMS: Poly(ethylene glycol) (PEG) and some substances similar to PEG in chemical structure were tested as stimulators of ligninolytic enzyme production in shaken culture of Phanerochaete chrysosporium. METHODS AND RESULTS: The substances that caused high enzymatic activity were linear polymers [poly(ethylene glycol), poly(propylene glycol), poly(butylene glycol) and poly(vinyl alcohol)] and cyclic polymers (crown ether). They can have terminal groups other than -OH [PEG (di)methyl ether, PEG sulphate, PEG derivative with the amino group and xanthate]. The maximum lignin peroxidase activities were compared with the surface pressure caused by the stimulator. Addition of polymers composed of charged monomer units did not increase the enzymatic activity and the fungi did not grow at all on addition of polymers having a fixed positive charge. CONCLUSIONS: Lignin peroxidase activity was increased after the addition of polymers with uncharged monomer units. It was higher and its maximum was reached in a shorter time on addition of polymers with higher molecular weights. SIGNIFICANCE AND IMPACT OF STUDY: Beside Tweens there are several polymers that stimulate ligninolytic enzyme production in shaken culture of P. chrysosporium. Their characteristics are: similarity to PEG in chemical structure, having uncharged monomer units and high molecular weight.     

Toxic effects of some alcohol and ethylene glycol derivatives on Cladosporium resinae.

Eleven commercially available alcohol and ethylene glycol derivatives were tested for their toxicity toward a problem organism in jet fuel, Cladosporium resinae. In the presence of glucose, 20% (vol/vol) ethylene glycol monomethyl ether prevented spore germination and mycelial growth, and 10% (vol/vol) 2-ethoxybutanol, 10% 2-isopropoxyethanol, 10% 3-methoxybutanol, 5% 2-butyloxyethanol, 5% ethylene glycol dibutyl ether, and 5% diethylene glycol monobutyl ether were found to have similar effects. In a biphasic kerosene-water system, 3-methoxybutanol, 2-butyloxyethanol, and diethylene glycol monobutyl ether were again found to be more toxic than ethylene glycol monomethyl ether. Considerable potassium efflux, protein leakage, and inhibition of endogenous respiration were observed in the presence of the more toxic compounds. 2-Butyloxyethanol also caused loss of sterols from cells.     

Depth profile of free volume in a mixture and copolymers of poly(N-vinyl-pyrrolidone) and poly(ethylene glycol) studied by positron annihilation spectroscopy

Effect of hydrogen bonding on the depth profile of the free-volume in a mixture (weight ratio of 65:35) of poly(N-vinyl-pyrrolidone) (PVP) and poly(ethylene glycol) (PEG) and the copolymers of vinyl pyrrolidone with poly(ethylene glycol) diacrylate (PVP-PEGDA) and monomethacrylate (PVP-PEGMMA) was studied using positron annihilation spectroscopy. Doppler broadening energy spectra of annihilation radiation and positron annihilation lifetime were measured as a function of positron incident energy (0-30 keV). Significant variations of the free-volume depth profile in terms of the S parameter, ortho-positronium lifetime, intensity, and lifetime distribution are observed as a result of the hydrogen-bonding replacement of covalent bonds. The polymer mixture with hydrogen bonding through two sides of PEG short chains has a larger free volume and a wider distribution than the comb-structured PVP-PEGMMA and the network structured PVP-PEGDA. A longer ortho-positronium lifetime is observed near the surface than in the bulk. This is interpreted in terms of surface effect, free volume, and hydrogen bonding for drug delivery applications of polymeric materials.     

A hypothesis and an experiment on the origin of the genetic coding process

From thermodynamic considerations it is argued that the earliest templates for protein synthesis were very unlike present nucleic acids. It is suggested that they were composed of linked uracil derivatives bearing hypothetical side chains that could specifically recognize and interact with individual amino acid side chains (Fig. 1). An experiment supporting the possibility of such a specific interaction is described. The hypothesis accounts for the grouping of amino acids in the present codon table according to their relative hydrophobic character.     

pH-sensitive unimolecular polymeric micelles: synthesis of a novel drug carrier

Novel amphiphilic star-shaped polymers showing pH-sensitivity were synthesized by atom transfer radical polymerization. These new polymers present a core-shell structure similar to polymeric micelles, but are inherently stable to dilution and are referred to as unimolecular polymeric micelles. A four-armed multifunctional initiator was used for the sequential polymerization of hydrophobic ethyl methacrylate and tert-butyl methacrylate and hydrophilic poly(ethylene glycol)methacrylate. Polymers of molecular weight ranging from 9000 to 20,000 were obtained. Results of dynamic light scattering showed micelle size ranging from 11 to 40 nm. Unimolecular micelles were also analyzed by static light scattering in aqueous environment. Star-shaped polymers which presented the highest molar ratio of hydrophobic monomers tended to form high molecular weight aggregates in water. Hydrolysis of the tert-butyl methacrylate units permitted the introduction of ionizable methacrylic acid functions. Size distributions were bimodal at both acidic and basic pH. Since, the polymers were designed as potential delivery systems for the oral administration of hydrophobic drugs, they were titrated to evaluate the degree of ionization as a function of pH. In the stomach, the carboxylic functions are expected to be fully protonated. However, in the intestine, the micelles will be more than 40% ionized. Fluorescence studies were conducted in order to evaluate the polarity of the micellar core. Results showed an increase in polarity with pH due to the ionization of the acid functions present along the polymer chains. The pH rise was associated with an increase in the in vitro release rate of progesterone, which was used as hydrophobic drug model.     

Modification of chitosan membrane with poly(vinyl alcohol) and biocompatibility evaluation

This work aimed to overcome chitosan (CS) membrane' drawbacks: mainly stiffness and hydrophobic surface by adding poly(vinyl alcohol) (PVA) and evaluate their biocompatibility. The chemical structure, crystalline and thermal properties were studied by FT-IR, XRD and DSC. The mechanical properties and wettability of CS/PVA membranes were studied by tensile test and static contact angle measurement. In vitro biocompatibility was also evaluated by MTS cytotoxicity assay and SEM examination. The results suggest that adding PVA into CS membrane could greatly improve CS membrane's flexibility and wettability. All the membranes prepared were biocompatible and have potential applications in GTR technology.     

Flavin-linked dehydrogenation of ether glycols by cell-free extracts of a soil bacterium

Payne, W. J. (University of Georgia, Athens), and R. L. Todd. Flavin-linked dehydrogenation of ether glycols by cell-free extracts of a soil bacterium. J. Bacteriol. 91:1533-1536. 1966.-Cell-free extracts of bacterium TEG-5 grown on tetraethylene glycol dehydrogenated a variety of ether glycols and nonylphenoxy and secondary alcohol ethoxy derivatives. Nicotinamide nucleotides did not serve as electron acceptors, but ferricyanide was effective. Dialysis of crude extract depressed activity with tetraethylene glycol, which was restored then by flavine adenine dinucleotide (FAD) or boiled extract supernatant fluid (BES) but not by other flavins. Precipitatation of extract protein at pH 4.0 at 80% ammonium sulfate saturation dissociated FAD and yielded an inactive fraction. Activity was restorable by FAD and BES but not by other flavins. Ethylene glycol was not dehydrogenated by the acid ammonium sulfate fraction with FAD. Atabrine inhibited tetraethylene glycol oxidation, and the inhibition was relieved by FAD but not by other flavins. Tergitols which have sulfated ethoxy side chains on secondary alcohols were not dehydrogenated, but those with free ethoxy side chains on identical alcohols were.     

Comparison of protein fouling on heat-treated poly(vinyl alcohol), poly(ether sulfone) and regenerated cellulose membranes using diffuse reflectance infrared Fourier transform spectroscopy

Poly(vinyl alcohol) (PVA) membranes for ultrafiltration were fabricated by heat-treatment to separate macromolecules from microsolutes. PVA is a hydrophilic polymer with good mechanical properties because of its semicrystalline structure. The membranes were heat-treated at 100 degrees C for 1 h to increase their crystallinity and thereby their mechanical strength. The mechanical strength of the membranes was evaluated using a dynamic mechanical analyzer by measuring their compressive and tensile moduli. Membrane selectivities and protein fouling of heat-treated PVA membranes were compared to the commercial poly(ether sulfone) (PeS) and regenerated cellulose membranes. Myoglobin from horse skeletal muscle was used as a model protein, and L-tryptophan was used as a model microsolute. Diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) was used to identify protein fouling on the surfaces of these membranes under flow and nonflow conditions. It was found from the selectivity and DRIFTS studies that PVA membranes were more resistant to fouling than regenerated cellulose and PeS membranes.     

Thermal stability of proteins in the presence of poly(ethylene glycols)

Thermal unfolding of ribonuclease, lysozyme, chymotrypsinogen, and beta-lactoglobulin was studied in the absence or presence of poly(ethylene glycols). The unfolding curves were fitted to a two-state model by a nonlinear least-squares program to obtain values of delta H, delta S, and the melting temperature Tm. A decrease in thermal transition temperature was observed in the presence of poly(ethylene glycol) for all of the protein systems studied. The magnitude of such a decrease depends on the particular protein and the molecular size of poly(ethylene glycol) employed. A linear relation can be established between the magnitude of the decrease in transition temperature and the average hydrophobicity of these proteins; namely, the largest observable decrease is associated with the protein of the highest hydrophobicity. Further analysis of the thermal unfolding data reveals that poly(ethylene glycols) significantly effect the relation between delta H degrees of unfolding and temperature for all the proteins studied. For beta-lactoglobulin, a plot of delta H versus Tm indicates a change in slope from a negative to a positive value, thus implying a change in delta Cp in thermal unfolding caused by the presence of poly(ethylene glycols). Results from solvent-protein interaction studies indicate that at high temperature poly(ethylene glycol) 1000 preferentially interacts with the denatured state of protein but is excluded from the native state at low temperature. These observations are consistent with the fact that poly(ethylene glycols) are hydrophobic in nature and will interact favorably with the hydrophobic side chains exposed upon unfolding; thus, it leads to a lowering of thermal transition temperature.     

Adsorption of lipoproteins with the aid of carboxymethylchitosan mircrospheres crosslinked with poly(ethylene glycol) bisglycidyl ether

Carboxymethylchitosan microspheres crosslinked with poly(ethylene glycol) bisglycidyl ether were prepared and then tested as an adsorbent for selective removal of low-density lipoprotein (LDL) in human plasma. The microspheres were formed by a method of electrostatic instillation and crosslinked with poly(ethylene glycol) bisglycidyl ether. FTIR spectral analyses and X-ray photoelectron spectroscopy revealed that carboxymethylchitosan was crosslinked through amino groups to poly(ethylene glycol) bisglycidyl ether. The plasma lipoprotein sorption tests showed that the adsorption properties of the crosslinked microspheres for LDL were dependent on the concentrations of carboxymethylchitosan and poly(ethylene glycol) bisglycidyl ether. When the concentrations of carboxymethylchitosan and poly(ethylene glycol) bisglycidyl ether were 3.5% and 6%, respectively, 40% LDL and lower than 10% high density lipoprotein in plasma could be removed and the adsorption could be reach an equilibrium in 30 min.     

Endotoxin removal with poly(ethyleneimine)-immobilized adsorbers: Sepharose 4B versus flat sheet and hollow fibre membranes

Poly(ethyleneimine) was immobilized on poly(vinyl alcohol)-coated nylon flat sheet membranes, poly(vinyl alcohol) and poly(ethylenevinyl alcohol) hollow fibre membranes as well as Sepharose 4B. The resulting poly(ethyleneimine)-immobilized adsorbers were used for removal of E. coli derived endotoxin from buffers and bovine serum albumin solutions. The efficiency of poly(ethyleneimine) proved to be constant over a wide pH range, including phosphate buffered saline. The performance depended upon the matrix type employed: endotoxin clearance factors varied from 100 to 120 000 in protein-free solutions and 40 to 33 000 in solutions of bovine serum albumin using 6000 EU/ml as feed concentration. The best adsorber was the flat sheet membrane-immobilized poly(ethyleneimine), followed by the hollow fibre-immobilized poly(ethyleneimine) and poly(ethyleneimine)-Sepharose. The factors influencing endotoxin clearance were the mass transport (convective systems were superior to the diffusive system), the chemical composition and the surface structure of the underlying matrix.     

De novo synthesis and cellular uptake of organic nanocapsules with tunable surface chemistry

Water-soluble organic nanocapsules were prepared from bottlebrush copolymers with triblock terpolymer side chains composed of a degradable inner block (polylactide), a cross-linkable middle block (poly(4-butenylstyrene)), and a functional outer block (poly(styrene-co-maleic anhydride)). Bottlebrush copolymers are macromolecules with a long linear backbone and shorter polymeric side chains densely grafted onto the backbone. Hollow cylindrical nanoparticles were prepared by peripheral cross-linking of the bottlebrush copolymers and subsequent selective removal of the core. Reactive anhydride groups of the outer functional layer allowed for the preparation of nanocapsules with tunable surface characteristics. Cellular uptake of negatively charged organic nanocapsules showed strong surface chemistry dependence. The presence of hydrophobic groups on the nanocapsule surface was necessary for their nonspecific association with the cell membrane and subsequent internalization by endocytosis. The length of surface grafted oligoethylene glycol chains also had a dramatic influence on the intracellular accumulation of nanocapsules. Macropinocytosis was shown to be the predominant pathway for the cellular uptake of organic nanocapsules.     

Synthesis and characterization of six-arm star poly(delta-valerolactone)-block-methoxy poly(ethylene glycol) copolymers

Novel amphiphilic six-arm star diblock copolymers based on biocompatible and biodegradable poly(delta-valerolactone) (PVL) and methoxy poly(ethylene glycol) (MePEG) were synthesized by a two-step process. First, the hydrophobic star-shaped PVL with hydroxyl terminated functional groups was synthesized using a multifunctional alcohol, dipentaerythritol (DPE), as the initiator and fumaric acid as the catalyst. The amphiphilic six-arm star copolymer of poly(delta-valerolactone)-b-methoxy poly(ethylene glycol), (PVL-b-MePEG)(6), was then synthesized by coupling the hydroxyl terminated six-arm PVL homopolymer with alpha-methoxy-omega-chloroformate-poly(ethylene glycol) (MePEG-COCl). (1)H NMR and GPC analyses confirmed the successful synthesis of star-shaped copolymers with predicted compositions and narrow molecular weight distributions. DSC analysis revealed that the glass transition temperatures of the star PVL homopolymers with M(n) between 5000 and 49 000 are not dependent on their molecular weights, whereas the melting temperatures of both the PVL homopolymers and the amphiphilic (PVL-b-MePEG)(6) copolymers increase with an increase in the PVL molecular weight. Micelles were prepared from the (PVL-b-MePEG)(6) copolymers via the dialysis method and found to have effective mean diameters ranging from 10 to 45 nm, depending on the copolymer composition. In addition, the (PVL-b-MePEG)(6) copolymers having lower PVL content were found to form micelles with a narrow monomodal size distribution, whereas the copolymers having higher PVL content tended to form aggregates with a bimodal size distribution. The noncytotoxicity of the copolymers was also confirmed in CHO-K1 fibroblast cells using a cell viability assay, indicating that the (PVL-b-MePEG)(6) copolymers are suitable for biomedical applications such as drug delivery.     

Hydrophobic interaction determined by partition in aqueous two-phase systems. Partition of proteins in systems containing fatty-acid esters of poly(ethylene glycol).

In this report we describe a new method which is useful for measuring hydrophobic interactions between aliphatic hydrocarbon chains and proteins in aqueous environment. The method is based on partition of proteins in an aqueous two-phase system containing dextran and poly(ethylene glycol) and different fatty acid esters of poly(ethylene glycol). The partition is measured under conditions where contributions from electrostatic interactions are eliminated. The difference in partition of proteins in phase systems with and without hyrocarbon groups bound to poly(ethylene glycol), deltalog K, where K is the partition coefficient, is taken as a measure of hydrophobic interaction. Deltalog K varies with size of hydrocarbon chain and type of protein. The length of the aliphatic chain should be greater than 8 carbon atoms in order to get a measurable effect in terms of deltalog K. Bovine serum albumin, beta-lactoglobulin, hemoglobin and myoglobin have been shown to have different affinities for palmitic acid ester of poly(ethylene glycol). No hydrophobic effect could be observed for ovalbumin, cytochrome c or alpha-chymotrypsinogen A.