Investigation of PVA/ws-chitosan hydrogels prepared by combined γ-irradiation and freeze-thawing

γ-Irradiation combined with freeze-thawing, i.e. irradiation followed by freeze-thawing and freeze-thawing followed by irradiation, was applied to prepare poly(vinyl alcohol) (PVA)/water soluble chitosan (ws-chitosan) hydrogels for wound dressing. The properties of these hydrogels were investigated and compared to those prepared by freeze-thawing and by irradiation, respectively. Hydrogels made by irradiation followed by freeze-thawing show larger swelling capacity and mechanical strength, higher thermal stability, lower water evaporation rate, and are less turbid than those made by pure freeze-thawing and freeze-thawing followed by irradiation. Hydrogels made by irradiation alone cannot be used as wound dressing due to their poor mechanical strength. SEM results show that the final structure of hydrogels made by combined irradiation and freeze-thawing is mainly determined by the first processing step. It is found that the appropriate amount of ws-chitosan can endow hydrogels with large swelling capacity and mechanical strength. The presence of ws-chitosan provides the hydrogels with good antibacterial activity against Escherichia coli (E. coli).     

Preparation and characterization of konjac glucomannan/poly(diallydimethylammonium chloride) antibacterial blend films

A novel antibacterial film was prepared by blending konjac glucomannan (KGM) and poly(diallydimethylammonium chloride) (PDADMAC) in an aqueous system. The antibacterial activity of the films against Staphylococcus aureus, Bacillus subtilis, Escherichia coli, Pseudomonas aeruginosa, and Saccharomyces were measured by the halo zone test and the double plate method. The films exhibited an excellent antibacterial activity against B. subtilis and S. aureus but not against E. coli, P. aeruginosa or Saccharomyces. The miscibility, morphology, thermal stability, water vapour permeability and mechanical properties of the blend films were investigated by density determination, SEM, ATR-IR, XRD, DSC, TGA, WVA and tensile tests. The results of density determination predicted that the blends of KGM and PDADMAC were miscible when the PDADMAC content was less than 70 wt%. Moreover, SEM and XRD confirmed the result. ATR-IR showed that strong intermolecular hydrogen bonds and electrostatic interactions occurred between KGM and PDADMAC in the blends. The tensile strength and the break elongation of the blends were improved largely to 106.5 MPa and 32.04% and the water vapour permeability decreased when the PDADMAC content was 20 wt%. The thermal stability of the blends was higher than pure KGM. The blends should be good antibacterial materials.     

The Novelty in Fabrication of Poly Vinyl Alcohol/κ-Carrageenan Hydrogel with <Emphasis Type="Italic">Lactobacillus bulgaricus</Emphasis> Extract as Anti-inflammatory Wound Dressing Agent

Material barrier properties to microbes are an important issue in many pharmaceutical applications like wound dressings. A wide range of biomaterials has been used to manage the chronic inflamed wounds. Eight hydrogel membranes of poly vinyl alcohol (PVA) with κ-carrageenan (KC) and Lactobacillus bulgaricus extract (LAB) have been prepared by using freeze–thawing technique. To evaluate the membranes efficiency as wound dressing agents, various tests have been done like gel fraction, swelling behavior, mechanical properties, etc. The antibacterial activities of the prepared membranes were tested against the antibiotic-resistant bacterial isolates. In addition, the safety usage of the prepared hydrogel was checked on human dermal fibroblast cells. The anti-inflammatory properties of the prepared hydrogel on LPS-PBMC cell inflammatory model were quantified using enzyme-linked immunosorbent assay (ELISA) and real-time polymerase chain reaction (RT-qPCR). The analysis data of TGA, SEM, gel fraction, and swelling behavior showed changes in properties of prepared PVA\KC\LAB hydrogel membrane than pure PVA hydrogel membrane. The antibacterial activities of the prepared membranes augmented in LAB extract-prepared membranes. Out of the eight used hydrogel membranes, the PVAKC4 hydrogel membrane is the safest one on fibroblast cellular proliferation with a maximum proliferation percentage 97.3%. Also, all the used hydrogel membrane showed abilities to reduce the concentration of IL-2 and IL-8 compared with both negative and positive control. In addition, almost all the prepared hydrogel membrane showed variable abilities to downregulate the expression of TNF-α gene with superior effect of hydrogel membrane KC1. PVA/KC/LAB extract hydrogel membrane may be a promising material for wound dressing application and could accelerate the healing process of the chronic wound because of its antimicrobial and anti-inflammatory properties.     

Rheological characterisation of a novel thermosensitive chitosan/poly(vinyl alcohol) blend hydrogel

Thermosensitive hydrogels that are triggered by changes in environmental temperature thus resulting in in situ hydrogel formation have recently attracted the attention of many investigators for biomedical applications. In the current work, the thermosensitive hydrogel was prepared through the mixture of chitosan (CS), poly(vinyl alcohol) (PVA) and sodium bicarbonate. The mixture was liquid aqueous solutions at low temperature (about 4 °C), but a gel under physiological conditions. The hydrogel was characterized by FTIR, swelling and rheological analysis. The effect of hydrogel composition and temperature on both the gel process and the gel strength was investigated from which possible hydrogel formation mechanisms were inferred. In addition, the hydrogel interior morphology as well as porosity of structure was evaluated by scanning electron microscopy (SEM). The potential of the hydrogels as vehicles for delivering bovine serum albumin (BSA) were also examined. In this study, the physically crosslinked chitosan/PVA gel was prepared under mild conditions without organic solvent, high temperature or harsh pH. The viscoelastic properties, as investigated rheologically, indicate that the gel had good mechanical strength. The gel formed implants in situ in response to temperature change, from low temperature (about 4 °C) to body temperature, which was very suitable for local and sustained delivery of proteins, cell encapsulation and tissue engineering.     

Gentamicin-Loaded Wound Dressing With Polyvinyl Alcohol/Dextran Hydrogel: Gel Characterization and In Vivo Healing Evaluation

To develop a gentamicin-loaded wound dressing, cross-linked hydrogel films were prepared with polyvinyl alcohol (PVA) and dextran using the freezing–thawing method. Their gel properties such as gel fraction, swelling, water vapor transmission test, morphology, tensile strength, and thermal property were investigated. In vitro protein adsorption test, in vivo wound healing test, and histopathology were performed. Dextran decreased the gel fraction, maximum strength, and thermal stability of hydrogels. However, it increased the swelling ability, water vapor transmission rate, elasticity, porosity, and protein adsorption. The drug gave a little positive effect on the gel properties of hydrogels. The gentamicin-loaded wound dressing composed of 2.5% PVA, 1.13% dextran, and 0.1% drug was more swellable, flexible, and elastic than that with only PVA because of its cross-linking interaction with PVA. In particular, it could provide an adequate level of moisture and build up the exudates on the wound area. From the in vivo wound healing and histological results, this gentamicin-loaded wound dressing enhanced the healing effect more compared to conventional product because of the potential healing effect of gentamicin. Thus, this gentamicin-loaded wound dressing would be used as a potential wound dressing with excellent forming and improved healing effect in wound care.     

Preparation and properties of alginate/carboxymethyl chitosan blend fibers

Alginate/carboxymethyl chitosan blend fibers, prepared by spinning their mixture solution through a viscose-type spinneret into a coagulating bath containing aqueous CaCl₂, were studied for structure and properties with the aid of infrared spectroscopy (IR), X-ray diffraction (XRD) and scanning electron micrography (SEM). The analyses indicated a good miscibility between alginate and carboxymethyl chitosan, because of the strong interaction from the intermolecular hydrogen bonds. The best values of the dry tensile strength and breaking elongation were obtained when carboxymethyl chitosan content was 30 and 10 wt%, respectively. The wet tensile strength and breaking elongation decreased with the increase of carboxymethyl chitosan content. Introduction of CM-chitosan in the blend fiber improved water-retention properties of blend fiber compared to pure alginate fiber. Antibacterial fibers, obtained by treating the fibres with aqueous solution of N-(2-hydroxy)-propyl-3-trimethylammonium chitosan chloride and silver nitrate, respectively, exhibited good antibacterial activity to Staphylococcus aureus.     

Preparation and characterization on mechanical and antibacterial properties of chitsoan/cellulose blends

Polysaccharides-based membranes of chitosan and cellulose blends were prepared using trifluoroacetic acid as a co-solvent. Morphology and mechanical property of prepared membranes were studied by Instron and dynamic mechanical thermal analysis. The mechanical and dynamic mechanical thermal properties of the cellulose/chitosan blends appear to be dominated by cellulose, suggests that cellulose/chitosan blends were not well miscible. It is believed that the intermolecular hydrogen bonding of cellulose is supposed to be break down to form cellulose–chitosan hydrogen bonding; however, the intra-molecular and intra-strand hydrogen bonds hold the network flat. The reduced water vapor transpiration rate through the chitosan/cellulose membranes indicates that the membranes used as a wound dressing may prevent wound from excessive dehydration. The chitosan/cellulose blend membranes demonstrate effective antimicrobial capability against Escherichia coli and Staphylococcus aureus, as examined by the antimicrobial test. These results indicate that the chitosan/cellulose blend membranes may be suitable to be used as a wound dressing with antibacterial properties.     

Molecular dynamics study of the influence of solvents on the structure and mechanical properties of poly(vinyl alcohol) gels

Molecular dynamics (MD) simulations were employed to study the influence of solvents on the structure and mechanical properties of physically crosslinked poly(vinyl alcohol) (PVA) gels. Firstly, three kinds of PVA precursor gels were made by adding water, dimethyl sulfoxide (DMSO) and a mixture of DMSO and water (4:1 by weight), respectively. The solvents in the precursor gels were then exchanged with water to obtain three kinds of PVA hydrogels. Solvent in the precursor gel with a mixture of DMSO and water was also exchanged with ethanol and DMSO, respectively. It was found that the tensile strength and failure strain of the PVA hydrogel prepared from precursor gel with a mixture of DMSO and water was the highest, and the polymer network was more homogeneous than the other two PVA hydrogels. The polymer network of PVA gel with ethanol or with DMSO was more heterogenous than with water, and the tensile strength and failure strain were much lower. The torsional activity of polymer chains of PVA gel with ethanol was much stronger than PVA gel with water and DMSO.     

Syntheses of novel myxopyronin B analogs as potential inhibitors of bacterial RNA polymerase

Based upon observations from our initial findings, additional myxopyronin B analogs have been prepared and tested for in vitro inhibitory activity against DNA-dependent RNA polymerase and antibacterial activity against Escherichia coli and Staphylococcus aureus.     

Preparation, characterization and properties of aminoethyl chitin hydrogels

Aminoethyl chitins (AEC) with different amino contents were synthesized from chitin and 2-chlorethylamine hydrochloride, and the AEC hydrogels were prepared by crosslinking with glutaraldehyde. The microstructures, swelling behaviors and antibacterial activities of the hydrogels were investigated. The results of Fourier transform infrared spectroscopy (FTIR), (1)H nuclear magnetic resonance ((1)H NMR) spectrum and scanning electron microscopy (SEM) showed that the hydrogels were prepared by forming the Schiff base from AEC and glutaraldehyde. The aminoethyl chitin hydrogels were sensitive to acidic environment. The swelling ratio changed with the amino content of AEC, declined with the increase of the crosslinking agent concentration and increased with the increase of the AEC concentration. In addition, the antibacterial results of the hydrogels against Staphylococcus aureus (S. aureus) indicated that the hydrogels had good antibacterial activities, and the antibacterial properties were affected by the amino content of AEC and the crosslinking agent concentration.     

Synthesis and characterization of hydrogels based on grafted chitosan for the controlled drug release

Temperature and pH-responsive hydrogels based on chitosan grafted with poly acrylic acid (PAAc), poly hydroxy propyl methacrylate (PHPMA), poly (vinyl alcohol) (PVA) and gelatin were prepared for controlled drug delivery. These stimuli-responsive hydrogels were synthesized by gamma irradiation technique. The degree of gelation was over 90% and increased as chitosan, AAc and PVA content increased, while the degree of gelation decrease with the increase of gelatin content. The equilibrium swelling studies of hydrogels prepared in various conditions were carried out in an aqueous solution, and the pH sensitivity in the range of 2–9 was investigated. An increase of swelling degree with an increase in the pH was noticed and showed the highest value at pH 9. Also antibiotic drug Oxttetracycline was loaded into the hydrogels and the release studies were carried out at different pH and temperature. The in vitro release profiles of the drug showed that, the release of the drug increased as the time, temperature and pH increased and reached to maximum after 48 h at pH 9. The prepared hydrogels were characterized by using SEM, FTIR, and DSC.     

掺银二氧化钛空心球的制备及其抗菌性能研究

以硫酸钛、尿素为原料,碳球为模板,采用水热沉淀法制备了二氧化钛空心球,以聚乙烯吡咯烷酮(PVP)为分散剂、硼氢化钾还原硝酸银的方法得到银掺杂的二氧化钛空心球。采用X射线粉末衍射仪(XRD)、扫描电镜(SEM)、透射电镜(TEM)、能谱仪(EDS)和傅里叶变换红外光谱仪(FT-IR)等测试手段对所得的样品进行了表征。采用抑菌圈法对其抗菌性能进行了检测,实验结果表明,在自然光条件下,商品二氧化钛P25和二氧化钛空心球对大肠杆菌、金黄色葡萄球菌、白色念珠菌没有任何抗菌效果,而载银量9.4 mol%的二氧化钛在常温范围内对三个菌种都具有优良的抗菌性能,可用于抗菌塑料、抗菌食品包装和抗菌纺织制品等领域。     

Preparation and performance evaluation of glucomannan–chitosan–nisin ternary antimicrobial blend film

The material behaviour and antimicrobial effect of konjac glucomannan edible film incorporating chitosan and nisin at various ratio or concentrations is discussed. This activity was tested against food pathogenic bacteria namely Escherichia coli, Staphylococcus aureus, Listeria monocytogenes, and Bacillus cereus. Mechanical and physical properties were determined and the results indicated that the blend film KC2 (mixing ratio konjac glucomannan 80/chitosan 20) showed the maximum tensile strength (102.8 ± 3.8 MPa) and a good transparency, water solubility, water vapor transmission ratio. The differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), etc. were used to characterize the structural change of the blend films. The results showed that the strong intermolecular hydrogen bonds took place between chitosan and konjac glucomannan. Incorporation of nisin at 42,000 IU/g of film for the selected blend film KC2 was found to have antimicrobial activity against S. aureus, L. monocytogenes, and B. cereus. The antimicrobial effect of chitosan or KC2 incorporating nisin was much better than that of konjac glucomannan incorporating nisin at each corresponding concentration and existed significant difference (p < 0.05), however, there was no significant difference on the antimicrobial effect between chitosan and KC2 both incorporating nisin. At all these levels, the ternary blend film KC2-nisin had a satisfactory mechanical, physical properties and antimicrobial activity, and could be applied as a potential ‘active’ packaging material.     

Electrospun nano-fiber mats containing cationic cellulose derivatives and poly (vinyl alcohol) with antibacterial activity

Nano-fibrous mats have been successfully prepared by electrospinning of the blend solutions of cationic cellulose derivatives (PQ-4) and polyvinyl alcohol (PVA). Effects of the blending ratio and applied voltage on the morphology and diameter of the electrospun nano-fibers were investigated. The average diameter of the PQ-4/PVA blend fibers was in the range of 150–250 nm. The electrospinning process became instable and the fiber diameter distribution broadened with increasing PQ-4 content and applied voltage. The antibacterial activity of electrospun PQ-4/PVA blend mats against Gram-negative bacteria Escherichia coli and Gram-positive bacteria Staphylococcus aureus indicated potential for biomedical use.     

Preparation and characterization of chitosan-polyvinyl alcohol blend hydrogels for the controlled release of nano-insulin

Chitosan (CS)-polyvinyl alcohol (PVA) blend hydrogels were prepared using glutaraldehyde as the cross-linking agent. The obtained hydrogels, which have the advantages of both PVA and CS, can be used as a material for the transdermal drug delivery (TDD) of insulin. The nano-insulin-loaded hydrogels were prepared under the following conditions: 1.2 g of polyethylene glycol, 1.5 g of CS, 1.2 g of PVA, 1.2 mL of 1% glutaraldehyde solution, 16 mL of water, and 40 mg of nano-insulin with 12 min of mixing time and 3 min of cross-linking time. The nano-insulin-loaded hydrogels were characterized using scanning electron microscopy, energy dispersive spectrometry, Fourier-transform infrared spectroscopy, differential scanning calorimetry, thermogravimetric analysis, X-ray diffraction, and its mechanical properties were analyzed. The results show that all molecules in the hydrogel have good compatibility and they formed a honeycomb-like structure. The hydrogel also showed good mechanical and thermal properties. The in vitro drug release of the hydrogel showed that the nano-insulin accorded with Fick's first law of diffusion and it has a high permeation rate (4.421 μg/(cm² h)). These results suggest that the nano-insulin-loaded hydrogels are a promising non-invasive TDD system for diabetes chemotherapy.     

A Novel Multifunctional Crosslinking PVA/CMCS Hydrogel Containing Cyclic Peptide Actinomycin X2 and PA@Fe with Excellent Antibacterial and Commendable Mechanical Properties

Bacterial infected environments and resulting bacterial infections have been threatening the human health globally. Due to increased bacterial resistance caused by improper and excessive use of antibiotics, antibacterial biomaterials are being developed as alternatives to antibiotics in some cases. Herein, an advanced multifunctional hydrogel with excellent antibacterial properties, enhanced mechanical properties, biocompatibility and self-healing performance, was designed through freezing-thawing method. This hydrogel network is composed of polyvinyl alcohol (PVA), carboxymethyl chitosan (CMCS), protocatechualdehyde (PA), ferric iron (Fe) and an antimicrobial cyclic peptide actinomycin X2 (Ac.X2). The double dynamic bonds among protocatechualdehyde (PA), ferric iron (Fe) and carboxymethyl chitosan containing coordinate bond (catechol-Fe) as well as dynamic Schiff base bonds and hydrogen bonds endowed the hydrogel with enhanced mechanical properties. Successful formation of hydrogel was confirmed through ATR-IR and XRD, and structural evaluation through SEM analysis, whereas mechanical properties were tested with electromechanical universal testing machine. The resulting PVA/CMCS/Ac.X2/PA@Fe (PCXPA) hydrogel has favorable biocompatibility and excellent broad-spectrum antimicrobial activity against both S. aureus (95.3 %) and E. coli (90.2 %) compared with free-soluble Ac.X2, which exhibited subpar performance against E. coli reported in our previous studies. This work provides a new insight on preparing multifunctional hydrogels containing antimicrobial peptides as antibacterial material.     

Hydrazones of 2-aryl-quinoline-4-carboxylic acid hydrazides: synthesis and preliminary evaluation as antimicrobial agents

A new series of 2-arylquinoline-4-carboxylic acid hydrazide–hydrazones was synthesized using an appropriate synthetic route. All the target compounds were evaluated for their in vitro antimicrobial activity against Staphylococcus aureus as an example for Gram-positive bacteria, Escherichia coli as an example for Gram-negative bacteria, and Candida albicans as a representative of fungi. The minimum inhibitory concentration (MIC) was determined for test compounds as well as for reference standards. Among the compounds tested, compounds having nitro substituents at the arylidene moiety showed the most potent antifungal as well as antibacterial activities against E. coli. Compound 23 displayed an antifungal activity comparable to that of nystatin. However, none of the compounds demonstrated any antibacterial activity against S. aureus. Hydrophobicity of the target compounds correlated weakly with their antibacterial and antifungal activities. The most potent compounds namely, 7, 18, 19, 22, and 23 were assessed for hemolytic toxicity and found to be non-hemolytic up to a concentration of 100 μg/mL. In addition, the most potent compound (23) was evaluated for in vitro cytotoxic activity against various cancer cell lines. This compound was found to display no cytotoxic activity but rather it induces the proliferation rate of Hep-G2 cells.     

Bovine hemoglobin: an attractive source of antibacterial peptides

A peptic hemoglobin hydrolysate was fractioned by a semi-preparative reversed-phase HPLC and some fractions have an antibacterial activity against four bacteria strains: Micrococcus luteus A270, Listeria innocua, Escherichia coli and Salmonella enteritidis. These fractions were analyzed by ESI/MS and ESI/MS/MS, in order to characterize the peptides in these fractions. Each fraction contains at least three peptides and some fractions contain five peptides. All these fractions were purified several times by HPLC to obtain pure peptides. Thirty antibacterial peptides were identified. From the isolated antibacterial peptides, 24 peptides were derived from the chains of hemoglobin and 6 peptides were derived from the β chains of hemoglobin. The lowest concentration of these peptides (minimum inhibitory concentration (MIC)) necessary to completely inhibit the growth of four bacteria strain was determined. The cell population of all of the tested bacteria species decreased by at least 97% after a 24-h incubation with any of the peptides at the minimum inhibitory concentration.     

蝉虫草（蝉花）来源的化合物鉴定与抗菌活性检测

蝉虫草（蝉花）是我国重要的传统中药材之一,用于治疗慢性肾炎等,但对其活性成分的研究仍不充分。本文采用硅胶柱、凝胶柱、ODS柱分离,以及HPLC等色谱技术,对蝉虫草子实体样品的乙酸乙酯提取物进行分离纯化,得到3个化合物。根据波谱学数据,化合物1-3分别鉴定为(E,E)-9-酮-10,12-十八碳二烯酸(E,E)-9-oxooctadeca-10,12-dienoic acid（1）、麦角甾醇ergosterol（2）和白僵菌酮bassiatin（3）,其中化合物1为首次从蝉虫草中分离获得。抑菌实验表明,3个化合物均对革兰氏阴性大肠杆菌Escherichia coli和革兰氏阳性枯草芽孢杆菌Bacillus subtilis有显著的抑菌活性,化合物1和3还对条件致病真菌白色念珠菌Candida albicans有明显的抑菌活性。本文的研究结果丰富了蝉虫草的活性化合物组成。     

Preparation and characterization of surface crosslinked TPS/PVA blend films

Surface crosslinked thermoplastic starch (TPS)/PVA blend films were prepared by applying ultra violet (UV) irradiation. Sodium benzoate was used as photosensitizer and induced onto film surface layer by soaking the TPS/PVA films in the photosensitizer aqueous solution. The effects of concentration of photosensitizer aqueous solution, soaking time and UV irradiation dose on the surface photocrosslinking reaction were investigated. Physical properties, such as water contact angle, moisture absorption, swelling degree and solubility in water as well as mechanical properties of the films were measured to characterize the influence of the surface photocrosslinking modification. The obtained results showed that the surface modification considerably reduced the surface hydrophilic character of the TPS/PVA films, enhanced the film’s water resistance and also increased tensile strength and Young’s modulus but decreased elongation at break of the films.