谷氨酸棒杆菌10147基因组中启动子活性片段的克隆与分析

摘要：【目的】获得谷氨酸棒杆菌10147基因组中具有启动子活性片段的结构序列,为构建表达载体做准备。【方法】利用启动子探测载体pAKC6,采用鸟枪法克隆经过限制性内切酶Sau3A I完全酶切的谷氨酸棒杆菌10147染色体DNA片段,并测定pAKC6上报告基因编码的氯霉素乙酰转移酶（CAT）的比活力,以筛选有启动子功能的片段。【结果】共克隆到30个具有启动子功能的片段。其中有三个插入片段起动的氯霉素乙酰转移酶比活力大于24 U/mg,插入片段F57起动的CAT比活力为32.50 U/mg;而插入有启动子Ptrc的阳性对照的CAT比活力为26.33 U/mg。【结论】获得三个DNA插入片段具有与已知启动子Ptrc相当的启动活性,这些片段可以用于构建谷氨酸棒杆菌表达载体。     

谷氨酸棒杆菌内源表达元件的筛选

【目的】构建谷氨酸棒杆菌表达元件探测载体,筛选能够启动蛋白表达的序列片段。【方法】基于谷氨酸棒杆菌表达载体p XMJ19,利用Golden Gate新型克隆方法构建表达元件插入位点,使筛选的片段能够与报告基因快速无缝衔接,同时避免残留额外的序列对表达元件效果测试产生可能存在的干扰。对本课题组前期的谷氨酸棒杆菌BZH001高、中、低溶氧条件下的发酵样品转录组数据进行分析,筛选出稳定于高转录水平的6个基因,通过软件预测每个基因的启动子区域和5′UTR区域,两者构成能够启动基因表达的功能性元件,并将其从基因组中克隆出来。以增强型绿色荧光蛋白基因egfp作为报告基因,快速测量出表达元件的效果。【结果】获得5个不同效果的内源性表达元件,最好的元件插入探测载体后在谷氨酸棒杆菌中表达的荧光强度大于3 500 RFU/OD600。【结论】通过结合转录组数据,探测载体能够快速有效筛选表达元件,为将来人们对谷氨酸棒杆菌基因工程改造和生物系统的构建提供更多基础材料。     

盐生盐杆菌RM07 DNA片段在大肠杆菌中的定点诱变和启动子功能分析

将来源于嗜盐古生菌——盐生盐杆菌(Halobacterium halobium)基因组的RM07 DNA片段以正反两个方向分别插入大肠杆菌启动子探针载体pKK232-8携带的报告基因——氯霉素抗性基因(cat)的上游,得到RM07-cat融合的质粒pRM07-1( )和pRM07-1(-),将其分别转入大肠杆菌HB101,进而检测了不同转化子菌株的氯霉素抗性水平和细胞内氯霉素乙酰转移酶蛋白质浓度。结果表明：正向的RM07片段在真细菌(大肠杆菌)中具有启动子活性,能够驱动cat报告基因的表达;而反向的RM07片段在大肠杆菌中不具有启动子活性。对RM07片段进行了定点诱变分析,检测了特定核苷酸突变对启动子活性的影响,结果进一步精确定位了RM07片段中对在大肠杆菌中的启动子功能有重要作用的关键碱基,并且通过改造RM07片段的碱基组成成分大幅提高了其在大肠杆菌中的启动子活性。     

副干酪乳酪杆菌ZY-1内源性质粒分析及其表达系统的构建与应用

高效稳定的乳杆菌表达载体的构建是实现其菌种改良和个性化菌株开发的关键。本研究从副干酪乳酪杆菌(Lacticaseibacillus paracasei) ZY-1中分离出4个内源性质粒并进行功能分析。通过将pLPZ3与pLPZ4的复制子rep,与pNZ5319质粒的氯霉素乙酰转移酶报告基因cat、pUC19的复制子ori构建大肠杆菌-乳酸菌穿梭载体pLPZ3N与pLPZ4N,进一步加上启动子Pldh3和mCherry红色荧光蛋白,获得表达载体pLPZ3E与pLPZ4E。pLPZ3与pLPZ4质粒大小分别为6 289 bp和5 087 bp,GC含量分别为40.94%和39.51%。2个穿梭载体可成功转化至乳酪杆菌属中,pLPZ4N的转化效率(5.23×10²-8.93×10²CFU/μg)略高于pLPZ3N。乳酸菌表达载体pLPZ3E与pLPZ4E转化至副干酪乳酪杆菌S-NB后,成功获得了mCherry红色荧光蛋白的表达。以P_ldh3为启动子构建的重组表达载体pLPZ4E-lacG转化得到的重组菌,其β-半乳糖苷酶酶活性...     

中间载体pBz6102的构建及CAT基因在转化烟草中的表达

来源于细菌的新霉素磷酸转移酶基因(NPT),氯霉素乙酰转移酶基因(CAT)以及来源于昆虫的荧光素酶基因等都是用于研究根癌农杆菌转化植物的良好标记。我们利用氯霉素乙酰转移酶嵌合基因和来源于Ti质粒T-区DNA的tmr基因,构建了中间载体pBZ 6102,并通过植物基因工程载体pGV 3850,将氯霉素乙酰转移酶嵌合基因和tmr基因引入了植物细胞,并测到了表达,在抗氯霉素植物中测到了氯霉素乙酰转移酶活性。中间裁体pBZ 6102上还有Pst Ⅰ,Xba Ⅰ等单一的限制性内切酶位点,外源基因极易插入。转化植物F_1代的种子抗性分析表明,80%左右的种子都能在含氯霉素的培养基上正常萌发,它们的幼苗中都有氯霉素乙酰转移酶活性,证明CAT基因通过了减数分裂稳定地保留在植物细胞的基因组内。     

IL-37基因启动子的克隆及其荧光素酶报告基因载体的构建

[目的]克隆白介素-37(IL-37)基因启动子,构建其荧光素酶报告基因载体,并分析活性。[方法]用PCR方法扩增IL-37基因5'端上游区3个不同长度的启动子片段,分别克隆入荧光素酶报告基因载体p GL3,构建IL-37基因启动子荧光素酶报告基因质粒。将所构建的质粒转染HEK-293细胞,通过双荧光素酶报告基因系统分析启动子的转录活性。[结果]754、1 017、2 043 bp等3个IL-37启动子片段正确亚克隆入荧光素酶报告基因载体,重组质粒转染HEK-293细胞后,双荧光素酶活性分析显示1 017 bp的启动子片段具有较强转录活性,约为对照组(空载体p GL3-basic)的10.9倍。[结论]成功克隆IL-37基因启动子,构建了大小为1 017 bp的IL-37基因启动子荧光素酶报告基因载体,为IL-37表达的调控机制的研究提供有效的工具。     

EphA3基因启动子区域定位表达及活性分析

目的构建含有不同长度EphA3基因启动子片段的报告基因载体,研究其在293T细胞和MEF细胞中的转录活性。方法以Balb／C小鼠基因组DNA为模板,扩增不同长度的EphA3基因启动子片段,并克隆进入荧光素酶报告基因质粒pGL3-Basic真核表达载体内。酶切鉴定及基因测序无误后,将重组质粒和pRL—CMV内对照质粒共转染293T和MEF细胞,分析不同长度的OhA3基因启动子片段的转录活性。结果酶切和测序鉴定表明表达载体构建成功,EphA3基因的核心启动子区域位于-279bp～＋110bp之间,在293T细胞和MEF细胞中其转录活性相似。结论成功构建了荧光素报告基因重组质粒,并确定了BphA3基因的核心启动子区域。     

玉米逆境诱导型启动子克隆及其植物表达载体构建

设计特异引物,利用PCR方法从玉米(Zea mays)基因组DNA中克隆低温和盐相应蛋白(low temperature andsalt responsive protein,LS)基因上游1 735 bp,命名为Lsp。利用在线启动子预测工具PlantCARE分析表明,序列中含有TATA-box和CAAT-box等核心元件,还包含各种胁迫响应元件。以植物表达载体pCAMBIA1301为基础,将克隆得到的启动子片段与GUS报告基因融合构建了重组表达载体pCAM-Lsp,并用反复冻融法将其导入农杆菌EHA105,通过农杆菌介导法转化烟草,GUS组织化学染色显示出Lsp驱动GUS基因表达。结果表明,该Lsp启动子片段具备一定的启动活性,为探明玉米逆境胁迫启动子表达调控序列及其调控机制的研究奠定基础。     

黄连对羟基苯基丙酮酸双加氧酶基因的植物表达载体构建

目的:构建除草剂抗性基因黄连对羟基苯基丙酮酸双加氧酶的植物表达载体.方法:通过PCR从重组质粒pGWB2/Cjhppd中扩增出大小为1 300bp的目的片段,亚克隆到pGEM-T easy上.BamHⅠ和SpeⅠ双酶切pGEM-T Easy/Cjhppd和质粒pCambia1301,回收得到1 300bp的Cjhppd基因片段和开环质粒pCambia-1301-UbiN,用T4连接酶连接,得到重组质粒,利用三亲法将其导入农杆菌EHA105 中.结果:成功得到农杆菌EHA105的阳性菌落,菌落PCR扩增得到和预期大小一致的1 300bpDNA片段.结论:成功将具有除草剂抗性的Cjhppd构建到了含有玉米泛素启动子Ubi和选择性标记基因Hpt的植物表达载体pCambia-1301-UbiN/Cjhppd,并导入根癌农杆菌EHA105中,可以用于水稻等单子叶植物的遗传转化.     

水稻幼苗特异应答H2O2的miRNA169b启动子表达载体的构建

目的:研究microRNA169b(miRNA169b)启动子不同长度片段的活性及自身调控。方法:用生物信息学方法分析水稻中miRNA169b前体上游1500 bp序列,并从水稻幼苗基因组DNA中扩增miRNA169b前体上游500、1000和1500 bp启动子片段,分别将3个片段克隆至萤光素酶报告基因载体p5XGal4-LUC上。结果:构建了miRNA169b启动子重组载体,序列分析表明与预期结果一致。结论:miRNA169b启动子调控的萤光素酶报告基因表达载体的构建,为研究水稻中miRNA基因自身的转录奠定了基础。     

Cloning and study of Corynebacterium glutamicum genes complementing ilvA and thrA2 mutations in Escherichia coli

Molecular cloning and expression of Corynebacterium glutamicum genes complementing Escherichia coli mutations thrA2 and ilvA was performed. It was demonstrated that the thrA2 gene of C. glutamicum is located close to thrB on EcoRI DNA fragment 4.1 kb long. The fragment was cloned in pUC18 vector. The thrA2 gene is expressed in the recombinant plasmid pOBT3 under control of the vector pUC18 Plac promoter. In E. coli minicells, the genes thrA2 and thrB determined synthesis of proteins of Mr 43kD and 25 kD, respectively. A gene complementing ilvA mutation of E. coli was identified in a library of EcoRI C. glutamicum DNA fragments. This library was constructed using plasmid vector. It was shown that the ilvA gene of C. glutamicum is located inside the 3.6 kb EcoRI fragment and is expressed using its own promoter.     

Construction of an Escherichia coli-Clostridium perfringens shuttle vector and plasmid transformation of Clostridium perfringens

A stable shuttle vector which replicates in Escherichia coli and Clostridium perfringens was constructed by ligating a 3.6-kilobase (kb) fragment of plasmid pBR322 with C. perfringens plasmid pHB101 (3.1 kb). The marker for this shuttle plasmid originated from the 1.3-kb chloramphenicol resistance gene of plasmid pHR106. The resulting shuttle vector, designated pAK201, is 8 kb in size and codes for resistance to 20 micrograms of chloramphenicol per ml in both E. coli and C. perfringens. Following shuttle vector construction in E. coli, plasmid pAK201 was transformed into E. coli HB101 and C. perfringens ATCC 3624A, using intact cell electroporation. The transformation frequencies were 10(6) and 10(4) transformants per microgram of DNA in E. coli and C. perfringens, respectively. Restriction enzyme analysis of the chimera isolated from transformants of both microorganisms suggested that the plasmids were identical. Reciprocal transformation experiments in E. coli and C. perfringens indicated no difference in transformation frequency. Plasmid pAK201 was stable in C. perfringens following repeated transfer in the absence of chloramphenicol pressure. The restriction map of plasmid pAK201 shows six unique cut sites which should be useful for future genetic analysis and C. perfringens gene library construction.     

Construction of an Escherichia coli-Clostridium perfringens shuttle vector and plasmid transformation of Clostridium perfringens.

A stable shuttle vector which replicates in Escherichia coli and Clostridium perfringens was constructed by ligating a 3.6-kilobase (kb) fragment of plasmid pBR322 with C. perfringens plasmid pHB101 (3.1 kb). The marker for this shuttle plasmid originated from the 1.3-kb chloramphenicol resistance gene of plasmid pHR106. The resulting shuttle vector, designated pAK201, is 8 kb in size and codes for resistance to 20 micrograms of chloramphenicol per ml in both E. coli and C. perfringens. Following shuttle vector construction in E. coli, plasmid pAK201 was transformed into E. coli HB101 and C. perfringens ATCC 3624A, using intact cell electroporation. The transformation frequencies were 10(6) and 10(4) transformants per microgram of DNA in E. coli and C. perfringens, respectively. Restriction enzyme analysis of the chimera isolated from transformants of both microorganisms suggested that the plasmids were identical. Reciprocal transformation experiments in E. coli and C. perfringens indicated no difference in transformation frequency. Plasmid pAK201 was stable in C. perfringens following repeated transfer in the absence of chloramphenicol pressure. The restriction map of plasmid pAK201 shows six unique cut sites which should be useful for future genetic analysis and C. perfringens gene library construction.     

Molecular cloning of promoter-containing fragments from Bacillus stearothermophilus and their expression in Escherichia coli and Bacillus subtilis

Abstract Bacillus stearothermophilus DNA fragments containing a promoter were isolated in Escherichia coli using a shuttle promoter-probe vector. The molecular sizes of the isolated fragments ranged from 0.78 to 10 kb. The 0.78 and 1.1 kb fragments were selected and examined in some detail for promoter activity in both E. coli and Bacillus subtilis by analysis of expression of erythromycin-resistance (Em^r) and β-galactosidase. The results showed that the two fragments exhibit a high promoter activity in both bacteria. In vitro promoter activity of the 1.1 kb fragment was also shown by RNA syntheses catalyzed by RNA polymerases prepared from E. coli, B. subtilis and B. stearothermophilus .     

Construction of a genetically engineered microorganism for CO2 fixation using a Rhodopseudomonas/Escherichia coli shuttle vector

The CO2 fixation ability of Rhodopseudomonas palustris DH was enhanced by introducing the recombinant plasmid pMG-CBBM containing the form II ribulose-1,5-bisphosphate carboxylase/oxygenase (RubisCO) gene (cbbM) isolated from Rps. palustris NO. 7. Sequencing of a 3.0-kb PstI fragment containing the cbbM gene revealed an open reading frame encoding 461 amino acids, homologous to known cbbM genes, with a ribosome binding site upstream of cbbM and a terminator downstream of cbbM, without promoter. pMG-CBBM, a Rhodopseudomonas/Escherichia coli shuttle expression plasmid, was derived from the Rhodopseudomonas/E. coli shuttle cloning vector pMG105, by inserting the promoter of the pckA gene and the cbbM gene into its multiple cloning site. Plasmid pMG-CBBM was transformed into Rps. palustris DH by electroporation, and was stably maintained when transformants were grown either photoheterotrophically or photolithoautotrophically in the absence of antibiotics. This is the first report of an expression plasmid containing a Rps. palustris-specific promoter that allows stable expression of a foreign gene in the absence of antibiotic selection.