Molecular mechanisms of genetic adaptation to xenobiotic compounds.

Microorganisms in the environment can often adapt to use xenobiotic chemicals as novel growth and energy substrates. Specialized enzyme systems and metabolic pathways for the degradation of man-made compounds such as chlorobiphenyls and chlorobenzenes have been found in microorganisms isolated from geographically separated areas of the world. The genetic characterization of an increasing number of aerobic pathways for degradation of (substituted) aromatic compounds in different bacteria has made it possible to compare the similarities in genetic organization and in sequence which exist between genes and proteins of these specialized catabolic routes and more common pathways. These data suggest that discrete modules containing clusters of genes have been combined in different ways in the various catabolic pathways. Sequence information further suggests divergence of catabolic genes coding for specialized enzymes in the degradation of xenobiotic chemicals. An important question will be to find whether these specialized enzymes evolved from more common isozymes only after the introduction of xenobiotic chemicals into the environment. Evidence is presented that a range of genetic mechanisms, such as gene transfer, mutational drift, and genetic recombination and transposition, can accelerate the evolution of catabolic pathways in bacteria. However, there is virtually no information concerning the rates at which these mechanisms are operating in bacteria living in nature and the response of such rates to the presence of potential (xenobiotic) substrates. Quantitative data on the genetic processes in the natural environment and on the effect of environmental parameters on the rate of evolution are needed.     

Environmental genomics: exploring the unmined richness of microbes to degrade xenobiotics

Increasing pollution of water and soils by xenobiotic compounds has led in the last few decades to an acute need for understanding the impact of toxic compounds on microbial populations, the catabolic degradation pathways of xenobiotics and the set-up and improvement of bioremediation processes. Recent advances in molecular techniques, including high-throughput approaches such as microarrays and metagenomics, have opened up new perspectives and pointed towards new opportunities in pollution abatement and environmental management. Compared with traditional molecular techniques dependent on the isolation of pure cultures in the laboratory, microarrays and metagenomics allow specific environmental questions to be answered by exploring and using the phenomenal resources of uncultivable and uncharacterized micro-organisms. This paper reviews the current potential of microarrays and metagenomics to investigate the genetic diversity of environmentally relevant micro-organisms and identify new functional genes involved in the catabolism of xenobiotics.     

Functional gene diversity analysis in BTEX contaminated soils by means of PCR-SSCP DNA fingerprinting: comparative diversity assessment against bacterial isolates and PCR-DNA clone libraries

Developments in molecular biology based techniques have led to rapid and reliable tools to characterize microbial community structures and to monitor their dynamics under in situ conditions. However, there has been a distinct lack of emphasis on monitoring the functional diversity in the environment. Genes encoding catechol 2,3-dioxygenases (C23O), as key enzymes of various aerobic aromatic degradation pathways, were used as functional targets to assess the catabolic gene diversity in differentially BTEX contaminated environments by polymerase chain reaction-single-strand conformation polymorphism (PCR-SSCP). Site specific PCR-SSCP fingerprints were obtained, showing that gene diversity experienced shifts correlated to temporal changes and levels of contamination. PCR-SSCP enabled the recovery of predominant gene polymorphs, and results closely matched with the information retrieved from random sequencing of PCR-DNA clone libraries. A new method for isolating strains capable of growing on BTEX compounds was developed to diminish preselection or enrichment bias and to assess the function of predominant gene polymorphs. C23O abundance in isolates correlated with the levels of BTEX pollution in the soil samples analysed. Isolates harbouring C23O genes, identical to the gene polymorph predominant in all contaminated sites analysed, showed an unexpected benzene but not toluene mineralizing phenotype whereas isolates harbouring a C23O gene variant differing by a single point mutation and observed in highly polluted sites only, were capable, among some other isolates, to mineralize benzene and toluene, indicating a catabolically determined sharing of carbon sources on-site. The PCR-SSCP technique is thus a powerful tool for assessing the diversity of functional genes and the identification of predominant gene polymorphs in environmental samples as a prerequisite to understand the functioning of microbial communities.     

细菌降解多环芳烃上游途径的遗传学研究进展

多环芳烃是一类毒性较大的环境污染物。微生物降解和转化是消除此类污染物的理想方法,已发现多种细菌具有这种功能。主要针对细菌在多环芳烃降解中上游途径的代谢酶及基因簇的组成进行综述,阐述了酶的遗传学特点,并探讨了PAHs代谢基因的进化。这有助于了解PAHs的细菌降解机制,并为有效实施生物修复提供理论依据。     

Insights into environmental bioremediation by microorganisms through functional genomics and proteomics

Environmental pollutants in the soil are a major concern worldwide. Bioremediation mediated by microorganisms is a highly promising technology that is environmentally friendly, safe, and effective. However, incomplete biological information regarding the cellular responses in many microbial communities restricts progress in the site-specific mineralization process. The application of proteomics in environmental bioremediation research provides a global view of the protein compositions of the microbial cells and offers a promising approach to address the molecular mechanisms of bioremediation. With the combination of proteomics, functional genomics provide an insight into global metabolic and regulatory networks that can enhance the understanding of gene functions. This article deals with the applications of functional genomics and proteomics to dissect the cellular responses to environmental stimuli, such as stress response, induction and expressions of regulatory proteins/enzymes in response to aromatic hydrocarbons and heavy metals. An understanding of the growth conditions governing the expression of the proteome (for example, enzymes and regulatory proteins of aromatic hydrocarbon degradation, energy generation pathways, transport and stress-related proteins) in a specific environment is essential for developing rational strategies for successful bioremediation.     

Microarray-based analysis of microbial functional diversity along an oil contamination gradient in oil field

To understand better the in situ microbial functional diversity under oil contamination stress, soils were sampled along a contamination gradient at an oil field in north-east China. Microbial community functional structure was examined with a functional gene array, termed GeoChip. Multivariate statistical analysis and meta-analysis were conducted to study the functional gene responses to oil concentrations. The total functional gene abundance and diversity decreased along the gradient of increasing contamination. The overall abundance of soil bacteria, archaea and fungi decreased to 10%, 40% and 80% of those in the pristine soil. Several functional genes in the families pgl, rbcL, nifH and nor and those encoding cellulase, laccase, chitinase, urease and key enzymes in metabolizing organic compounds were significantly decreased with oil contamination, especially under high contamination stress. However, a few genes encoding key enzymes for catechol, protocatechuate, and biphenyl degradation and in the gene families of nir, rbcL and pgl showed a significant increase at a medium level of oil contamination. Oil content and soil available nitrogen were found to be important factors influencing the microbial community structure. The results provide an insight into microbial functional diversity in oil-contaminated soils, providing potential information for on-site management and remediation measures.     

Emerging high-throughput approaches to analyze bioremediation of sites contaminated with hazardous and/or recalcitrant wastes

Sustainable development requires the promotion of environmental management and a constant search for new technologies to treat a wide range of aquatic and terrestrial habitats contaminated by increasing anthropogenic activities. Bioremediation, i.e. the elimination of natural or xenobiotic pollutants by living organisms, is an environmentally friendly and cost-effective alternative to physico-chemical cleanup options. However, the strategy and outcome of bioremediation in open systems or confined environments depend on a variety of physico-chemical and biological factors that need to be assessed and monitored. In particular, microorganisms are key players in bioremediation applications, yet their catabolic potential and their dynamics in situ remain poorly characterized. To perform a comprehensive assessment of the biodegradative potential of a contaminated site and efficiently monitor changes in the structure and activities of microbial communities involved in bioremediation processes, sensitive, fast and large-scale methods are needed. Over the last few years, the scientific literature has revealed the progressive emergence of genomic high-throughput technologies in environmental microbiology and biotechnology. In this review, we discuss various high--throughput techniques and their possible--or already demonstrated-application to assess biotreatment of contaminated environments.     

Anaerobic biodegradation of aromatic hydrocarbons: pathways and prospects

Aromatic hydrocarbons contaminate many environments worldwide, and their removal often relies on microbial bioremediation. Whereas aerobic biodegradation has been well studied for decades, anaerobic hydrocarbon biodegradation is a nascent field undergoing rapid shifts in concept and scope. This review presents known metabolic pathways used by microbes to degrade aromatic hydrocarbons using various terminal electron acceptors; an outline of the few catabolic genes and enzymes currently characterized; and speculation about current and potential applications for anaerobic degradation of aromatic hydrocarbons.     

Assessment and modification of degenerate qPCR primers that amplify functional genes from etheneotrophs and vinyl chloride-assimilators

Aims: Degenerate qPCR primer sets that target the functional genes etnC and etnE in etheneotrophs and vinyl chloride‐assimilating bacteria were assessed and modified in an effort to improve performance. Methods and Results: Functional gene abundance in four pure cultures was estimated by qPCR using novel (MRTC and MRTE) and existing (RTC and RTE) degenerate primer sets and compared to abundances estimated with nondegenerate gene‐specific primers (GSPs). Functional gene abundance in groundwater DNA extracted from several contaminated sites was also estimated with MRTC and MRTE primers. Conclusions: MRTC primers displayed significantly improved etnC quantification in both pure cultures and environmental samples. Significance and Impact of the Study: Application of MRTC and MRTE primer sets will enhance microbial ecology studies involving etheneotrophs and qPCR analyses that support vinyl chloride bioremediation strategies.     

细菌分解代谢转座子研究

近年来 ,随着人工合成化学物质大量进入环境 ,现已在环境中发现了新的适应性的细菌对有机污染物的代谢机制。许多分解代谢基因与插入元件或转座子相连 ,因此 ,分解代谢基因可以在细菌间快速传播。这种快速传播有利于新的降解途径的产生。因此 ,这种代谢全能性可以被开发并在生物修复污染环境中起到关键作用     

Nucleic-acid-based methods for monitoring the performance of in situ bioremediation

Over the last decade, major advancements have occurred in the application of nucleic-acid-based methods to detect and determine the levels of catabolic genes in environmental samples. Studies have focused on validating methods in microcosms, studying changes in the structure and expression of microbial communities in response to contaminants, and improving the sensitivity of the methods. Only in the last few years have these methods transitioned from development and validation to efforts to apply these methods for monitoring in situ bioremediation. Methods that analyse nucleic acids extracted from environmental samples are of value to bioremediation because they allow analysis independent of the artefacts that can arise from laboratory biodegradative potential assays and laboratory culture-based enumerations and from the inability to culture a large proportion of the micro-organisms in the environment In theory, these methods enable a more comprehensive perspective, and a more defensible interpretation, of the microbial community response to intrinsic and engineered bioremediation processes. Results from the first studies applying nucleic-acid-based methods to intrinsic or engineered bioremediation indicate that these methods have both potential and limitations. The rapidly increasing number of cloned and sequenced catabolic genes, methodological advancements such as the ability to track specific micro-organisms without prior sequence data, and the potential use of bioaugmentation in the field suggest that the utility of these methods for in situ bioremediation will increase in the coming years.     

Bacterial metabolism of polycyclic aromatic hydrocarbons: strategies for bioremediation

Polycyclic aromatic hydrocarbons (PAHs) are compounds of intense public concern due to their persistence in the environment and potentially deleterious effects on human, environmental and ecological health. The clean up of such contaminants using invasive technologies has proven to be expensive and more importantly often damaging to the natural resource properties of the soil, sediment or aquifer. Bioremediation, which exploits the metabolic potential of microbes for the clean-up of recalcitrant xenobiotic compounds, has come up as a promising alternative. Several approaches such as improvement in PAH solubilization and entry into the cell, pathway and enzyme engineering and control of enzyme expression etc. are in development but far from complete. Successful application of the microorganisms for the bioremediation of PAH-contaminated sites therefore requires a deeper understanding of the physiology, biochemistry and molecular genetics of potential catabolic pathways. In this review, we briefly summarize important strategies adopted for PAH bioremediation and discuss the potential for their improvement.     

Development of a PCR method for the detection and quantification of benzoyl-CoA reductase genes and its application to monitored natural attenuation

Benzoyl coenzyme A reductase (BCR) catalyzes dearomatization of benzoyl coenzyme A (benzoyl-CoA), which is the central step in the anaerobic degradative pathways for a variety of aromatic compounds. This study developed a PCR method for the detection and quantification of BCR genes in bacterial strains and environmental samples. PCR primers were designed by aligning known BCR genes in Thauera, Azoarcus and Rhodopseudomonas species, and their utility was assessed by amplifying BCR fragments from aromatic-hydrocarbon degrading anaerobes and other bacteria. BCR fragments with the expected sizes were obtained from denitrifying and phototrophic aromatics degraders. The positive signals were also obtained from Geobacter metallireducens and xylene-degrading sulfate-reducing bacterium (strain mXyS1) but not from other aromatics-degrading sulfate-reducing bacteria and aerobic bacteria. When the PCR was used for analyzing a natural attenuation (NA) site, the positive signal was obtained only from gasoline-contaminated groundwater; sequence analysis of these amplicons revealed that most of them exhibited substantial similarities to the known BCRs. Quantitative competitive PCR analysis estimated BCR-gene copies to account for 10–40% of bacterial 16S rRNA gene copies in the contaminated groundwater, indicating that bacteria possessing BCR genes were highly enriched in the contaminated groundwater. In microcosm bioremediation tests using the contaminated groundwater, the copy number of BCR gene was approximately 10-fold increased in the course of aromatics degradation under denitrifying conditions but not under sulfidogenic conditions. These results suggest the utility of the PCR method for assessing the potential of denitrifying bacteria for aromatic-compound degradation in groundwater.     

Microbial functional gene diversity with a shift of subsurface redox conditions during In Situ uranium reduction

To better understand the microbial functional diversity changes with subsurface redox conditions during in situ uranium bioremediation, key functional genes were studied with GeoChip, a comprehensive functional gene microarray, in field experiments at a uranium mill tailings remedial action (UMTRA) site (Rifle, CO). The results indicated that functional microbial communities altered with a shift in the dominant metabolic process, as documented by hierarchical cluster and ordination analyses of all detected functional genes. The abundance of dsrAB genes (dissimilatory sulfite reductase genes) and methane generation-related mcr genes (methyl coenzyme M reductase coding genes) increased when redox conditions shifted from Fe-reducing to sulfate-reducing conditions. The cytochrome genes detected were primarily from Geobacter sp. and decreased with lower subsurface redox conditions. Statistical analysis of environmental parameters and functional genes indicated that acetate, U(VI), and redox potential (E(h)) were the most significant geochemical variables linked to microbial functional gene structures, and changes in microbial functional diversity were strongly related to the dominant terminal electron-accepting process following acetate addition. The study indicates that the microbial functional genes clearly reflect the in situ redox conditions and the dominant microbial processes, which in turn influence uranium bioreduction. Microbial functional genes thus could be very useful for tracking microbial community structure and dynamics during bioremediation.     

Functional gene diversity of soil microbial communities from five oil-contaminated fields in China

To compare microbial functional diversity in different oil-contaminated fields and to know the effects of oil contaminant and environmental factors, soil samples were taken from typical oil-contaminated fields located in five geographic regions of China. GeoChip, a high-throughput functional gene array, was used to evaluate the microbial functional genes involved in contaminant degradation and in other major biogeochemical/metabolic processes. Our results indicated that the overall microbial community structures were distinct in each oil-contaminated field, and samples were clustered by geographic locations. The organic contaminant degradation genes were most abundant in all samples and presented a similar pattern under oil contaminant stress among the five fields. In addition, alkane and aromatic hydrocarbon degradation genes such as monooxygenase and dioxygenase were detected in high abundance in the oil-contaminated fields. Canonical correspondence analysis indicated that the microbial functional patterns were highly correlated to the local environmental variables, such as oil contaminant concentration, nitrogen and phosphorus contents, salt and pH. Finally, a total of 59% of microbial community variation from GeoChip data can be explained by oil contamination, geographic location and soil geochemical parameters. This study provided insights into the in situ microbial functional structures in oil-contaminated fields and discerned the linkages between microbial communities and environmental variables, which is important to the application of bioremediation in oil-contaminated sites.     

细菌对环境污染物的趋化性及其在生物修复中的作用

细菌对有机化合物的降解能力是一种利用碳源和能源的优势,这种能力可以用来设计安全、有效和无二次污染的污染物的生物修复系统。趋化性是细菌适应外界化学环境变化而作出的行为反应,是一种寻找碳源和能源的优势。细菌的趋化性能够增强细菌在自然环境中的降解污染物的效果,细菌的趋化性与降解性之间的关系研究已经成为热点。介绍了细菌的趋化性的基本概念和趋化信号转导的机制,重点讨论了细菌对环境污染化合物的趋化性,从基因水平揭示了趋化性与降解性之间的紧密联系,认为趋化性可以有效地促进降解性细菌对污染物的生物修复作用。     

Functional genes reveal the intrinsic PAH biodegradation potential in creosote-contaminated groundwater following in situ biostimulation

A small-scale functional gene array containing 15 functional gene probes targeting aliphatic and aromatic hydrocarbon biodegradation pathways was used to investigate the effect of a pilot-scale air sparging and nutrient infiltration treatment on hydrocarbon biodegradation in creosote-contaminated groundwater. Genes involved in the different phases of polycyclic aromatic hydrocarbon (PAH) biodegradation were detected with the functional gene array in the contaminant plume, thus indicating the presence of intrinsic biodegradation potential. However, the low aerobic fluorescein diacetate hydrolysis, the polymerase chain reaction (PCR) amplification of 16S rRNA genes closely similar to sulphate-reducing and denitrifying bacteria and the negligible decrease in contaminant concentrations showed that aerobic PAH biodegradation was limited in the anoxic groundwater. Increased abundance of PAH biodegradation genes was detected by functional gene array in the monitoring well located at the rear end of the biostimulated area, which indicated that air sparging and nutrient infiltration enhanced the intrinsic, aerobic PAH biodegradation. Furthermore, ten times higher naphthalene dioxygenase gene copy numbers were detected by real-time PCR in the biostimulated area, which was in good agreement with the functional gene array data. As a result, functional gene array analysis was demonstrated to provide a potential tool for evaluating the efficiency of the bioremediation treatment for enhancing hydrocarbon biodegradation in field-scale applications. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.