Solid phase DNA amplification: characterisation of primer attachment and amplification mechanisms

Different chemical methods used to attach oligonucleotides by their 5′-end on a glass surface were tested in the framework of solid phase PCR where surface-bound instead of freely-diffusing primers are used to amplify DNA. Each method was first evaluated for its capacity to provide a high surface coverage of oligonucleotides essentially attached via a 5′-specific linkage that satisfyingly withstands PCR conditions and leaves the 3′-ends available for DNA polymerase activity. The best results were obtained with 5′-thiol-modified oligonucleotides attached to amino-silanised glass slides using a heterobifunctional cross-linker reagent. It was then demonstrated that the primers bound to the glass surface using the optimal chemistry can be involved in attaching and amplifying DNA molecules present in the reaction mix in the absence of freely-diffusing primers. Two distinct amplification processes called interfacial and surface amplification have been observed and characterised. The newly synthesised DNA can be detected and quantified by radioactive and fluorescent hybridisation assays. These new surface amplification processes are seen as an interesting approach for attachment of DNA molecules by their 5′-end on a solid support and can be used as an alternative route for producing DNA chips for genomic studies.     

Analysis of DNA-microarrays produced by inverse in situ oligonucleotide synthesis.

5'-Phosphoramidites protected by 2-nitrophenylethyl (NPE) and 2-(4-nitrophenyl)ethoxy carbonyl (NPEOC) functions were employed for in situ synthesis of oligonucleotides in 5'-->3' direction on flat glass surfaces. By this inverse synthesis format, the oligonucleotides are attached to the solid support via their 5'-ends while the free 3'-hydroxyl groups are available as substrates for enzymatic reactions such as elongation by polymerases, thereby adding another feature to the portfolio of chip-based applications. Having a fluorescence dye present at the first base during synthesis, the quality of the oligonucleotides was analysed quantitatively by capillary electrophoresis after release from the solid support. With about 95% yield per condensation, it was found to be equivalent to synthesis results achieved on CPG support. The chip-bound oligonucleotides could be extended enzymatically upon hybridisation of a DNA-template. Surprisingly, however, only 63% of the oligonucleotides were elongated in polymerase reactions, while oligonucleotides that were released from the support behaved normally in standard PCR amplifications. This rate of 63% nevertheless compares favourably with an extension rate of only 50%, which was achieved under identical conditions, if pre-fabricated oligonucleotides of identical sequence had been spotted to the glass support.     

Arrays of complementary oligonucleotides for analysing the hybridisation behaviour of nucleic acids.

Arrays of oligonucleotides corresponding to a full set of complements of a known sequence can be made in a single series of base couplings in which each base in the complement is added in turn. Coupling is carried out on the surface of a solid support such as a glass plate, using a device which applies reagents in a defined area. The device is displaced by a fixed movement after each coupling reaction so that consecutive couplings overlap only a portion of previous ones. The shape and size of the device and the amount by which it is displaced at each step determines the length of the oligonucleotides. Certain shapes create arrays of oligonucleotides from mononucleotides up to a given length in a single series of couplings. The array is used in a hybridisation reaction to a labelled target sequence, and shows the hybridisation behaviour of every oligonucleotide in the target sequence with its complement in the array. Applications include sequence comparison to test for mutation, analysis of secondary structure, and optimisation of PCR primer and antisense oligonucleotide design.     

Oligonucleotide hybridizations on glass supports: a novel linker for oligonucleotide synthesis and hybridization properties of oligonucleotides synthesised in situ.

A novel linker for the synthesis of oligonucleotides on a glass support is described. Oligonucleotides synthesised on the support remain tethered to the support after ammonia treatment and are shown to take part in sequence specific hybridisation reactions. These hybridizations were carried out with oligonucleotides synthesised on 'ballotini' solid sphere glass beads and microscope slides. The linker has a hexaethylene glycol spacer, bound to the glass via a glycidoxypropyl silane, terminating in a primary hydroxyl group that serves as starting point for automated or manual oligonucleotide synthesis.     

Versatile derivatisation of solid support media for covalent bonding on DNA-microchips

A chemistry was developed that permits on DNA-arrays both the covalent immobilisation of pre-fabricated nucleic acids-such as oligonucleotides, PCR-products or peptide nucleic acid oligomers-and the in situ synthesis of such compounds on either glass or polypropylene surfaces. Bonding was found to be stable even after some 30 cycles of stripping. Due to a dendrimeric structure of the linker molecule, the loading can be modified in a controlled manner and increased beyond the capacity of glass without negative effects on hybridisation efficiency. Also, the chemistry warrants the modulation of other surface properties such as charge or hydrophobicity. Preferentially, attachment of nucleic acids takes place only via the terminal amino-group of amino-modified oligonucleotides or the terminal hydroxyl-group of unmodified molecules so that the entire molecule is accessible to probe hybridisation. This derivatisation represents a support chemistry versatile enough to serve nearly all current forms of DNA-arrays or microchips.     

Rapid detection of Salmonella subspecies I by PCR combined with non-radioactive hybridisation using covalently immobilised oligonucleotide on a microplate

Abstract A polymerase chain reaction (PCR)-based test was developed for the detection of Salmonella . One pair of oligonucleotide primers was designed to amplify a 93-bp fragment of a gene required for the invasion of HeLa cells by Salmonella ser Typhi strain Ty2. The amplified product was analysed by non-radioactive sandwich hybridisation in microtiter plates using two oligonucleotides. The capture oligonucleotide was covalently linked onto aminated wells of microtiter plates. The detection oligonucleotide was labelled with biotine. The hybrid molecules were detected by avidine conjugated with alkaline phosphatase and chromogenic substrate. The described combination of microplate sandwich hybridisation and PCR seems to be a suitable method for rapid detection of Salmonella subspecies I. It only requires a thermal cycler and a conventional microtiter reader, and can be readily done on a large scale.     

Synthesis and evaluation of phosphorescent oligonucleotide probes for hybridisation assays

Monofunctional, p-isothiocyanatophenyl-derivatives of platinum (II)-coproporphyrin-I (PtCP-NCS) were evaluated as phosphorescent labelling reagents for synthetic oligonucleotides containing a 3′- or 5′-amino modification. Synthesis and purification conditions were optimised to generate high yields and purity of PtCP-labelled oligonucleotide probes. Phosphorescent properties of the PtCP label have been shown to be largely unaffected by conjugation to oligonucleotides of various length, GC composition and label attachment site. 5′-PtCP-labelled oligonucleotides were shown to work efficiently as primers in a standard PCR. A dedicated 532 nm laser-based time-resolved fluorescence plate reader enabled highly sensitive detection of PtCP-labelled oligonucleotides and PCR products, both in solution and in agarose gels, with limits of detection in the order of 0.3 pM. A model system employing two complementary oligonucleotides labelled with PtCP and QSY® 7 dye (dark quencher) showed strong (~20-fold) and specific proximity quenching of PtCP label upon hybridisation in solution. The potential applications of PtCP-labelled probes in hybridisation assays were discussed.     

Coupling of a DNA piezoelectric biosensor and polymerase chain reaction to detect apolipoprotein E polymorphisms

In this paper we report the coupling of the Polymerase Chain Reaction (PCR) with a piezoelectric biosensor to detect a point mutation in a human gene. Biotinylated 23-mer probes were immobilised on the streptavidin coated gold surface of a quartz crystal; streptavidin was covalently bound to the thiol/dextran modified gold surface. The hybridisation of the immobilised probes with a short sequence (23 mer) complementary, non-complementary and mismatched DNA was investigated: the device was able to distinguish the different synthetic oligonucleotides. Many cycles of measurements can be performed on the same crystal surface regenerating the single strand of DNA with 1 mM of HCl. The same hybridisation reaction was then performed using real samples of human DNA extracted from blood and amplified by PCR, following a standard procedure for genetic detection of the polymorphism of the apolipoprotein E (apoE) gene. The procedure was able to distinguish the sequences present in the different samples, which differ only in one base: in this way it was possible distinguish between different groups of genotypes with apoE typing. Experiments with 'blank' samples confirmed the absence of adsorption or non-specific effects on the quartz crystal treated with the reported procedure.     

Microarray fabrication with covalent attachment of DNA using bubble jet technology

We have developed a method for fabricating DNA microarrays that uses a Bubble Jet ink jet device to eject 5'-terminal-thiolated oligonucleotides to a glass surface. The oligonucleotides are covalently attached to the glass surface by heterobifunctional crosslinkers that react with the amino group on the substrate and a thiol group on the oligonucleotide probe. Using this method, we fabricated DNA microarrays that carried 64 groups of 18-mer oligonucleotides encoding all possible three-base mutations in the mutational "hot spot" of the p53 tumor-suppressor gene. These were screened with a fluorescently labeled synthetic 18-mer oligonucleotide derived from the p53 gene, or segments of the p53 gene that had been PCR amplified from genomic DNA of two cell lines of human oral squamous cell carcinoma (SCC). This allowed us to discriminate between matched hybrids and 1 bp-mismatched hybrids.     

Silanized nucleic acids: a general platform for DNA immobilization

We have developed a method for simultaneous deposition and covalent cross-linking of oligonucleotide or PCR products on unmodified glass surfaces. By covalently conjugating an active silyl moiety onto oligonucleotides or cDNA in solutions we have generated a new class of modified nucleic acids, namely silanized nucleic acids. Such silanized molecules can be immobilized instantly onto glass surfaces after manual or automated deposition. This method provides a simple and rapid, yet very efficient, solution to the immobilization of prefabricated oligonucleotides and DNA for chip production.     

Labelfree fully electronic nucleic acid detection system based on a field-effect transistor device

The labelfree detection of nucleic acid sequences is one of the modern attempts to develop quick, cheap and miniaturised hand-held devices for the future genetic testing in biotechnology and medical diagnostics. We present an approach to detect the hybridisation of DNA sequences using electrolyte-oxide-semiconductor field-effect transistors (EOSFETs) with micrometer dimensions. These semiconductor devices are sensitive to electrical charge variations that occur at the surface/electrolyte interface, i.e. upon hybridisation of oligonucleotides with complementary single-stranded (ss) oligonucleotides, which are immobilised on the oxide surface of the transistor gate. This method allows direct, time-resolved and in situ detection of specific nucleic acid binding events without any labelling. We focus on the detection mechanism of our sensors by using oppositely charged polyelectrolytes (PAH and PSS) subsequently attached to the transistor structures. Our results indicate that the sensor output is charge sensitive and distance dependent from the gate surface, which pinpoints the need for very defined surface chemistry at the device surface. The hybridisation of natural 19 base-pair sequences has been successfully detected with the sensors. In combination with nano-transistors a PCR free detection system might be feasible in future.     

Steric factors influencing hybridisation of nucleic acids to oligonucleotide arrays.

We have investigated the use of spacer molecules to reduce steric interference of the support on the hybridisation behaviour of immobilised oligonucleotides. These spacers are built up from a variety of monomeric units, using phosphoramidite chemistry, by condensation onto an amine-functionalised polypropylene support. The optimal spacer length was determined to be at least 40 atoms in length, giving up to 150-fold increase in the yield of hybridisation. The effects of different charged groups in the spacer were also examined, and it was shown that both positively and negatively charged groups in the spacer diminish the yield of hybridisation. Steric hindrance in hybridisation can also be a problem if the oligonucleotides attached to the support are too close to each other. Surface coverage was varied using a combination of cleavable and stable linkers, giving the highest hybridisation yields for surfaces containing approximately 50% of the maximum concentration of oligonucleotides.     

Design considerations for array CGH to oligonucleotide arrays.

BACKGROUND: Representational oligonucleotide microarray analysis has been developed for detection of single nucleotide polymorphisms and/or for genome copy number changes. In this process, the intensity of hybridization to oligonucleotides arrays is increased by hybridizing a polymerase chain reaction (PCR)-amplified representation of reduced genomic complexity. However, hybridization to some oligonucleotides is not sufficiently high to allow precise analysis of that portion of the genome. METHODS: In an effort to identify aspects of oligonucleotide hybridization affecting signal intensity, we explored the importance of the PCR product strand to which each oligonucleotide is homologous and the sequence of the array oligonucleotides. We accomplished this by hybridizing multiple PCR-amplified products to oligonucleotide arrays carrying two sense and two antisense 50-mer oligonucleotides for each PCR amplicon. RESULTS: In some cases, hybridization intensity depended more strongly on the PCR amplicon strand (i.e., sense vs. antisense) than on the detection oligonucleotide sequence. In other cases, the oligonucleotide sequence seemed to dominate. CONCLUSION: Oligonucleotide arrays for analysis of DNA copy number or for single nucleotide polymorphism content should be designed to carry probes to sense and antisense strands of each PCR amplicon to ensure sufficient hybridization and signal intensity.     

The tagged microarray marker (TAM) method for high-throughput detection of single nucleotide and indel polymorphisms

The tagged microarray marker (TAM) method allows high-throughput differentiation between predicted alternative PCR products. Typically, the method is used as a molecular marker approach to determining the allelic states of single nucleotide polymorphisms (SNPs) or insertion-deletion (indel) alleles at genomic loci in multiple individuals. Biotin-labeled PCR products are spotted, unpurified, onto a streptavidin-coated glass slide and the alternative products are differentiated by hybridization to fluorescent detector oligonucleotides that recognize corresponding allele-specific tags on the PCR primers. The main attractions of this method are its high throughput (thousands of PCRs are analyzed per slide), flexibility of scoring (any combination, from a single marker in thousands of samples to thousands of markers in a single sample, can be analyzed) and flexibility of scale (any experimental scale, from a small lab setting up to a large project). This protocol describes an experiment involving 3,072 PCRs scored on a slide. The whole process from the start of PCR setup to receiving the data spreadsheet takes 2 d.     

Direct fluorescence analysis of genetic polymorphisms by hybridization with oligonucleotide arrays on glass supports.

A simple and rapid method for the analysis of genetic polymorphisms has been developed using allele-specific oligonucleotide arrays bound to glass supports. Allele-specific oligonucleotides are covalently immobilized on glass slides in arrays of 3 mm spots. Genomic DNA is amplified by PCR using one fluorescently tagged primer oligonucleotide and one biotinylated primer oligonucleotide. The two complementary DNA strands are separated, the fluorescently tagged strand is hybridized to the support-bound oligonucleotide array, and the hybridization pattern is detected by fluorescence scanning. Multiple polymorphisms present in the PCR product may be detected in parallel. The effect of spacer length, surface density and hybridization conditions were evaluated, as was the relative efficacy of hybridization with single or double-stranded PCR products. The utility of the method was demonstrated in the parallel analysis of 5 point mutations from exon 4 of the human tyrosinase gene.     

Dendrimeric coating of glass slides for sensitive DNA microarrays analysis

Successful use and reliability of microarray technology is highly dependent on several factors, including surface chemistry parameters and accessibility of cDNA targets to the DNA probes fixed onto the surface. Here, we show that functionalisation of glass slides with homemade dendrimers allow production of more sensitive and reliable DNA microarrays. The dendrimers are nanometric structures of size-controlled diameter with aldehyde function at their periphery. Covalent attachment of these spherical reactive chemical structures on amino-silanised glass slides generates a reactive ~100 Å layer onto which amino-modified DNA probes are covalently bound. This new grafting chemistry leads to the formation of uniform and homogenous spots. More over, probe concentration before spotting could be reduced from 0.2 to 0.02 mg/ml with PCR products and from 20 to 5 µM with 70mer oligonucleotides without affecting signal intensities after hybridisation with Cy3- and Cy5-labelled targets. More interestingly, while the binding capacity of captured probes on dendrimer-activated glass surface (named dendrislides) is roughly similar to other functionalised glass slides from commercial sources, detection sensitivity was 2-fold higher than with other available DNA microarrays. This detection limit was estimated to 0.1 pM of cDNA targets. Altogether, these features make dendrimer-activated slides ideal for manufacturing cost-effective DNA arrays applicable for gene expression and detection of mutations.     

PCR- and ligation-mediated synthesis of marker cassettes with long flanking homology regions for gene disruption in Saccharomyces cerevisiae.

We developed a novel method for synthesizing marker-disrupted alleles of yeast genes. The first step is PCR amplification of two sequences located upstream and downstream of the reading frame to be disrupted. Due to the addition of non-specific single A overhangs by Taq DNA polymerase, each PCR product can be ligated with a marker DNA which has T residues at its 3' ends. After amplification of individual ligation products through the second PCR, both products are mixed and annealed, and the single strand is converted to a double strand by an extension reaction. The final step is PCR amplification of the fragment composed of a selectable marker and two flanking sequences with the outermost primers. This method is rapid and needs only short oligonucleotides as primers.     

Validation of the high-throughput marker technology DArT using the model plant Arabidopsis thaliana

Diversity Arrays Technology (DArT) is a microarray-based DNA marker technique for genome-wide discovery and genotyping of genetic variation. DArT allows simultaneous scoring of hundreds of restriction site based polymorphisms between genotypes and does not require DNA sequence information or site-specific oligonucleotides. This paper demonstrates the potential of DArT for genetic mapping by validating the quality and molecular basis of the markers, using the model plant Arabidopsis thaliana. Restriction fragments from a genomic representation of the ecotype Landsberg erecta (Ler) were amplified by PCR, individualized by cloning and spotted onto glass slides. The arrays were then hybridized with labeled genomic representations of the ecotypes Columbia (Col) and Ler and of individuals from an F₂ population obtained from a Col × Ler cross. The scoring of markers with specialized software was highly reproducible and 107 markers could unambiguously be ordered on a genetic linkage map. The marker order on the genetic linkage map coincided with the order on the DNA sequence map. Sequencing of the Ler markers and alignment with the available Col genome sequence confirmed that the polymorphism in DArT markers is largely a result of restriction site polymorphisms.Electronic Supplementary Material Supplementary material is available in the online version of this article at     

随机引物在分子生物学研究中的应用

随机引物指非特异序列的寡聚核苷酸作为DNA合成过程中的引物, 是相对于特异引物的概念.90年代它与PCR技术结合衍生了几项新技术:采用不同长度随机引物进行DNA指纹分析而衍生出的RAPD、AP-PCR及DAF方法; 进行mRNA多态分析的“差异显示”; 以及rPCR, T-PCR等技术. 以RAPD为例介绍了随机引物PCR的技术特点及其在分子生物学研究中的应用.