Polymer supported synthesis of aminooxyalkylated oligonucleotides,and some applications in the fabrication of microarrays

A new protocol has been described for solid phase preparation of 3′- and 5′-aminooxylalkylated oligonucleotides using commercially available reagents. This involves attachment of linker 4 either with an LCAA-CPG support via succinoylation followed by synthesis (3′-aminooxyalkylated oligomers) or formation of its phosphoramidite 6 followed by coupling with desired oligomer (for generating 5′-aminooxyalkylated oligomers). Both the routes produced modified oligonucleotides in sufficiently high yields and purity (on HPLC) via conventional oligonucleotide synthesis on an automated synthesizer and deprotection step using aqueous ammonia (16 h, 60 °C). Aminooxyalkylated oligonucleotides were used to construct microarrays on glass surface (biochips). The performance of the biochips was evaluated by immobilizing modified oligonucleotides on epoxylated glass microslides under different sets of conditions with respect to pH, temperature and time. Further, the constructed microarrays were successfully used for detection of nucleotide mismatches and bacterial typhoid.     

Versatile derivatisation of solid support media for covalent bonding on DNA-microchips

A chemistry was developed that permits on DNA-arrays both the covalent immobilisation of pre-fabricated nucleic acids-such as oligonucleotides, PCR-products or peptide nucleic acid oligomers-and the in situ synthesis of such compounds on either glass or polypropylene surfaces. Bonding was found to be stable even after some 30 cycles of stripping. Due to a dendrimeric structure of the linker molecule, the loading can be modified in a controlled manner and increased beyond the capacity of glass without negative effects on hybridisation efficiency. Also, the chemistry warrants the modulation of other surface properties such as charge or hydrophobicity. Preferentially, attachment of nucleic acids takes place only via the terminal amino-group of amino-modified oligonucleotides or the terminal hydroxyl-group of unmodified molecules so that the entire molecule is accessible to probe hybridisation. This derivatisation represents a support chemistry versatile enough to serve nearly all current forms of DNA-arrays or microchips.     

Thermolytic release of covalently linked DNA oligonucleotides and their conjugates from controlled-pore glass at near neutral pH

The functionalization of long chain alkylamine controlled-pore glass (CPG) with a 3-hydroxypropyl-(2-cyanoethyl)thiophosphoryl linker and its conversion to the support 7 has led to the synthesis of DNA oligonucleotides and their 3'- or (3',5')-conjugates. Indeed, CPG support 7 has been successfully employed in the synthesis of both native and fully phosphorothioated DNA 20-mers. Unlike conventional succinylated CPG supports, this distinctively functionalized support allows oligonucleotide deprotection and removal of the deprotection side products to proceed without releasing the oligonucleotide into the aqueous milieu. When freed from deprotection side products, the DNA oligonucleotide is thermolytically released from the support within 2 h under nearly neutral conditions (pH 7.2, 90 degrees C). The quality of these oligonucleotides is comparable to that of identical oligonucleotides synthesized from succinylated CPG supports in terms of shorter than full length oligonucleotide contaminants and overall yields. The versatility of the thermolytic CPG support 7 is further demonstrated by the synthesis of a DNA oligonucleotide (20-mer) and its conjugation with an azido and alkynyl groups at both 5'-and 3'-termini, respectively. The functionality of the (3',5')-heteroconjugated oligonucleotide 18 is verified by its circularization to the DNA oligonucleotide 19 under "click" chemistry conditions.     

Analysis of DNA-microarrays produced by inverse in situ oligonucleotide synthesis.

5'-Phosphoramidites protected by 2-nitrophenylethyl (NPE) and 2-(4-nitrophenyl)ethoxy carbonyl (NPEOC) functions were employed for in situ synthesis of oligonucleotides in 5'-->3' direction on flat glass surfaces. By this inverse synthesis format, the oligonucleotides are attached to the solid support via their 5'-ends while the free 3'-hydroxyl groups are available as substrates for enzymatic reactions such as elongation by polymerases, thereby adding another feature to the portfolio of chip-based applications. Having a fluorescence dye present at the first base during synthesis, the quality of the oligonucleotides was analysed quantitatively by capillary electrophoresis after release from the solid support. With about 95% yield per condensation, it was found to be equivalent to synthesis results achieved on CPG support. The chip-bound oligonucleotides could be extended enzymatically upon hybridisation of a DNA-template. Surprisingly, however, only 63% of the oligonucleotides were elongated in polymerase reactions, while oligonucleotides that were released from the support behaved normally in standard PCR amplifications. This rate of 63% nevertheless compares favourably with an extension rate of only 50%, which was achieved under identical conditions, if pre-fabricated oligonucleotides of identical sequence had been spotted to the glass support.     

New light labile linker for solid phase synthesis of 2'-O-acetalester oligonucleotides and applications to siRNA prodrug development

We report on the synthesis and properties of oligonucleotides containing 2′-O-(levulinic acid) and 2′-O-(amino acid) acetalesters. Given that esters serve as promoieties in several therapeutic prodrugs, we believe that these derivatives will have potential use as nucleic acid prodrugs. In addition, we report on the synthesis of a novel solid support with a photolabile linker that not only allows for the synthesis of oligonucleotides containing various 2′-O-acetalesters, but can be generally adopted to the synthesis of base-sensitive oligoribonucleotides. The release of oligonucleotides from this support is faster than with conventional linkers.     

An activated triple bond linker enables 'click' attachment of peptides to oligonucleotides on solid support

A general procedure, based on a new activated alkyne linker, for the preparation of peptide-oligonucleotide conjugates (POCs) on solid support has been developed. With this linker, conjugation is effective at room temperature (RT) in millimolar concentration and submicromolar amounts. This is made possible since the use of a readily attachable activated triple bond linker enhances the Cu(I) catalyzed 1,3-dipolar cycloaddition ('click' reaction). The preferred scheme for conjugate preparation involves sequential conjugation to oligonucleotides on solid support of (i) an H-phosphonate-based aminolinker; (ii) the triple bond donor p-(N-propynoylamino)toluic acid (PATA); and (iii) azido-functionalized peptides. The method gives conversion of oligonucleotide to the POC on solid support, and only involves a single purification step after complete assembly. The synthesis is flexible and can be carried out without the need for specific automated synthesizers since it has been designed to utilize commercially available oligonucleotide and peptide derivatives on solid support or in solution. Methodology for the ready conversion of peptides into 'clickable' azidopeptides with the possibility of selecting either N-terminus or C-terminus connection also adds to the flexibility and usability of the method. Examples of synthesis of POCs include conjugates of oligonucleotides with peptides known to be membrane penetrating and nuclear localization signals.     

Preactivated carboxyl linker for the rapid conjugation of alkylamines to oligonucleotides on solid support

A C10 linker phosphoramidite reagent terminated with a succinimidyl-activated carboxyl group was prepared and used to couple to the 5'-end of an oligonucleotide synthesized on a solid support. The succinimidyl-activated carboxyl functionality can be used for rapid conjugation of amines to oligonucleotides on solid support or it can be hydrolyzed to form a carboxylic acid functionality. The activated linker was successfully used for conjugation of several primary and secondary aliphatic amine derivatives (including biotin and fluorescein cadaverine) onto a solid support-bound 12-mer DNA oligonucleotide at scales ranging from 0.15 to 1.0 micromol. The overall yields of the conjugation products after AMA deprotection and cleavage from the solid support ranged from 43 to 75% of the total oligonucleotide product. This value is significant, as it includes oligonucleotide synthesis, coupling of the linker, and conjugation of the amine. In addition, the entire process of oligonucleotide synthesis, linker coupling, amine conjugation, deprotection, and cleavage of the oligonucleotide from solid support can be accomplished in 1 day.     

A novel universal linker for efficient synthesis of phosphorothioate oligonucleotides

A versatile and conformationally preorganized universal linker molecule is reported here for efficient synthesis of phosphorothioate oligonucleotides. With respect to nucleoside loaded support, comparable yield and quality based on ion-pair LC-MS are obtained for both deoxy and 2'-O-methoxyethyl modified phosphorothioate oligonucleotides. No 3'-phosphate or phosphorothioate monoester or any modification of universal molecule still attached to oligonucleotide was observed. [structure: see text]     

Solid-phase synthesis of oligonucleotides containing a bipyridine ligand at the 3'-3' inversion of polarity site

The preparation of a solid support useful for the synthesis of oligonucleotides with a 3'-3' inversion of polarity, via a linker containing a chelating molecule, namely 2,2'-bipyridine, is described.     

Synthesis of 3'-3'-linked oligonucleotides branched by a pentaerythritol linker and the thermal stabilities of the triplexes with single-stranded DNA or RNA

Synthesis of 3'-3'-linked oligonucleotides branched by a pentaerythritol linker is described. The branched oligonucleotides were synthesized on a DNA/RNA synthesizer using a controlled pore glass (CPG) with a pentaerythritol linker carrying 4,4'-dimethoxytrityl (DMTr) and levulinyl (Lev) groups. The stability of the triplexes between the branched oligonucleotides and the target single-stranded DNA or RNA was studied by thermal denaturation. The oligonucleotides with the pentaerythritol linker formed thermally stable triplexes with the single-stranded DNA and RNA. Furthermore, the branched oligonucleotides containing 2'-O-methylribonucleosides, especially the oligonucleotide composed of 2'-deoxyribonucleosides and 2'-O-methylribonucleosides, stabilized the triplexes with the single-stranded DNA or RNA. Thus, the branched oligonucleotide containing 2'-O-methylribonucleosides may be a candidate for a novel antisense molecule by the triplex formation.     

A NOVEL APPROACH FOR THE SOLID PHASE SYNTHESIS OF DNA-PEPTIDE CONJUGATES

The strategy of this study involves automated synthesis of oligonucleotides on a CPG support using standard cyanoethyl phosphoramidite chemistry followed by covalent linkage to peptide fragments bearing a free terminal α-amino group and residues with protected side chains. Conjugation was formed through an alkyldiisocyanate linker. Conjugates wereisolated by cleavage from the solid support and deprotection in one step.     

A novel approach for the solid phase synthesis of DNA-peptide conjugates

The strategy of this study involves automated synthesis of oligonucleotides on a CPG support using standard cyanoethyl phosphoramidite chemistry followed by covalent linkage to peptide fragments bearing a free terminal alpha-amino group and residues with protected side chains. Conjugation was formed through an alkyldiisocyanate linker. Conjugates were isolated by cleavage from the solid support and deprotection in one step.     

Linker phosphoramidite reagents for the attachment of the first nucleoside to underivatized solid-phase supports

New linker phosphoramidite reagents containing a cleavable 3′-ester linkage are used for attaching the first nucleoside to the surface of a solid- phase support. Inexpensive, underivatized amino supports, such as long chain alkylamine controlled-pore glass, can serve as universal supports. No modifications to phosphoramidite coupling conditions are required and, after synthesis, treatment with NH₄OH releases the products with 3′-OH ends. No 3′-dephosphorylation is required. Phosphoramidite reagents containing a succinate and sulfonyl diethanol linkage between the nucleoside and phosphoramidite group are particularly advantageous and can be used to create both 3′-OH and 5′-phosphate ends on oligonucleotides. Reproducibility and quality of oligonucleotide synthesis is demonstrated for either column and 96-well plate formats on low-, medium- or high-loading CPG supports.     

Novel photocleavable universal support for oligonucleotide synthesis

A novel photocleavable universal support for the automated solid phase synthesis of oligonucleotides is described. The linker between the growing oligonucleotide chain and CPG support contains a nucleophilic amine protected with a photocleavable group. On exposure to UV light, this group is detached and the free amine affords cleavage of the oligonucleotide from the support. The use of long wavelength UV light avoids damage to the DNA.     

Solid phase DNA amplification: characterisation of primer attachment and amplification mechanisms

Different chemical methods used to attach oligonucleotides by their 5′-end on a glass surface were tested in the framework of solid phase PCR where surface-bound instead of freely-diffusing primers are used to amplify DNA. Each method was first evaluated for its capacity to provide a high surface coverage of oligonucleotides essentially attached via a 5′-specific linkage that satisfyingly withstands PCR conditions and leaves the 3′-ends available for DNA polymerase activity. The best results were obtained with 5′-thiol-modified oligonucleotides attached to amino-silanised glass slides using a heterobifunctional cross-linker reagent. It was then demonstrated that the primers bound to the glass surface using the optimal chemistry can be involved in attaching and amplifying DNA molecules present in the reaction mix in the absence of freely-diffusing primers. Two distinct amplification processes called interfacial and surface amplification have been observed and characterised. The newly synthesised DNA can be detected and quantified by radioactive and fluorescent hybridisation assays. These new surface amplification processes are seen as an interesting approach for attachment of DNA molecules by their 5′-end on a solid support and can be used as an alternative route for producing DNA chips for genomic studies.     

STEP-BY-STEP CONTROL BY MALDI-TOF MS OF AN OLIGONUCLEOTIDE SYNTHESIS ON STANDARD CPG SOLID-SUPPORT

MALDI-TOF mass spectrometry was used to monitor DNA solid-phase synthesis on long-chain alkylamine controlled-pore glass (LCAA-CPG) with a standard succinyl linker between the solid support and the growing oligonucleotide.     

Novel Photocleavable Universal Support for Oligonucleotide Synthesis

Abstract

A novel photocleavable universal support for the automated solid phase synthesis of oligonucleotides is described. The linker between the growing oligonucleotide chain and CPG support contains a nucleophilic amine protected with a photocleavable group. On exposure to UV light, this group is detached and the free amine affords cleavage of the oligonucleotide from the support. The use of long wavelength UV light avoids damage to the DNA.     

Step-by-step control by MALDI-TOF MS of an oligonucleotide synthesis on standard CPG solid-support

MALDI-TOF mass spectrometry was used to monitor DNA solid-phase synthesis on long-chain alkylamine controlled-pore glass (LCAA-CPG) with a standard succinyl linker between the solid support and the growing oligonucleotide.     

Double-stranded oligonucleotides containing 5-aminomethyl-2'-deoxyuridine form thermostable anti-parallel triplexes with single-stranded DNA or RNA

This Letter describes the synthesis and properties of double-stranded antisense oligonucleotides connected with a pentaerythritol linker. We found that double-stranded antisense oligonucleotides with aminomethyl residues have high affinity for single-stranded DNA or RNA in buffer solutions with and without MgCl(2). Thus, these oligonucleotides would be useful as antisense oligonucleotides for targeting single-stranded RNA through triplex formation.     

Characterization of oligodeoxyribonucleotide synthesis on glass plates

Achieving high fidelity chemical synthesis on glass plates has become increasingly important, since glass plates are substrates widely used for miniaturized chemical and biochemical reactions and analyses. DNA chips can be directly prepared by synthesizing oligonucleotides on glass plates, but the characterization of these micro-syntheses has been limited by the sub-picomolar amount of material available. Most DNA chip syntheses have been assayed using in situ coupling of fluorescent molecules to the 5′-OH of the synthesized oligonucleotides. We herein report a systematic investigation of oligonucleotide synthesis on glass plates with the reactions carried out in an automated DNA synthesizer using standard phosphoramidite chemistry. The analyses were performed using ³²P gel electrophoresis of the oligonucleotides cleaved from glass plates to provide product distribution profiles according to chain length of oligonucleotides. 5′-Methoxythymidine was used as the chain terminator, which permits assay of coupling reaction yields as a function of chain length growth. The results of this work reveal that a major cause of lower fidelity synthesis on glass plates is particularly inefficient reactions of the various reagents with functional groups close to glass plate surfaces. These problems cannot be detected by previous in situ fluorescence assays. The identification of this origin of low fidelity synthesis on glass plates should help to achieve improved synthesis for high quality oligonucleotide microarrays.