Oligonucleotide hybridizations on glass supports: a novel linker for oligonucleotide synthesis and hybridization properties of oligonucleotides synthesised in situ.

A novel linker for the synthesis of oligonucleotides on a glass support is described. Oligonucleotides synthesised on the support remain tethered to the support after ammonia treatment and are shown to take part in sequence specific hybridisation reactions. These hybridizations were carried out with oligonucleotides synthesised on 'ballotini' solid sphere glass beads and microscope slides. The linker has a hexaethylene glycol spacer, bound to the glass via a glycidoxypropyl silane, terminating in a primary hydroxyl group that serves as starting point for automated or manual oligonucleotide synthesis.     

Polymer supported synthesis of aminooxyalkylated oligonucleotides,and some applications in the fabrication of microarrays

A new protocol has been described for solid phase preparation of 3′- and 5′-aminooxylalkylated oligonucleotides using commercially available reagents. This involves attachment of linker 4 either with an LCAA-CPG support via succinoylation followed by synthesis (3′-aminooxyalkylated oligomers) or formation of its phosphoramidite 6 followed by coupling with desired oligomer (for generating 5′-aminooxyalkylated oligomers). Both the routes produced modified oligonucleotides in sufficiently high yields and purity (on HPLC) via conventional oligonucleotide synthesis on an automated synthesizer and deprotection step using aqueous ammonia (16 h, 60 °C). Aminooxyalkylated oligonucleotides were used to construct microarrays on glass surface (biochips). The performance of the biochips was evaluated by immobilizing modified oligonucleotides on epoxylated glass microslides under different sets of conditions with respect to pH, temperature and time. Further, the constructed microarrays were successfully used for detection of nucleotide mismatches and bacterial typhoid.     

Characterization of oligodeoxyribonucleotide synthesis on glass plates

Achieving high fidelity chemical synthesis on glass plates has become increasingly important, since glass plates are substrates widely used for miniaturized chemical and biochemical reactions and analyses. DNA chips can be directly prepared by synthesizing oligonucleotides on glass plates, but the characterization of these micro-syntheses has been limited by the sub-picomolar amount of material available. Most DNA chip syntheses have been assayed using in situ coupling of fluorescent molecules to the 5′-OH of the synthesized oligonucleotides. We herein report a systematic investigation of oligonucleotide synthesis on glass plates with the reactions carried out in an automated DNA synthesizer using standard phosphoramidite chemistry. The analyses were performed using ³²P gel electrophoresis of the oligonucleotides cleaved from glass plates to provide product distribution profiles according to chain length of oligonucleotides. 5′-Methoxythymidine was used as the chain terminator, which permits assay of coupling reaction yields as a function of chain length growth. The results of this work reveal that a major cause of lower fidelity synthesis on glass plates is particularly inefficient reactions of the various reagents with functional groups close to glass plate surfaces. These problems cannot be detected by previous in situ fluorescence assays. The identification of this origin of low fidelity synthesis on glass plates should help to achieve improved synthesis for high quality oligonucleotide microarrays.     

Thermolytic release of covalently linked DNA oligonucleotides and their conjugates from controlled-pore glass at near neutral pH

The functionalization of long chain alkylamine controlled-pore glass (CPG) with a 3-hydroxypropyl-(2-cyanoethyl)thiophosphoryl linker and its conversion to the support 7 has led to the synthesis of DNA oligonucleotides and their 3'- or (3',5')-conjugates. Indeed, CPG support 7 has been successfully employed in the synthesis of both native and fully phosphorothioated DNA 20-mers. Unlike conventional succinylated CPG supports, this distinctively functionalized support allows oligonucleotide deprotection and removal of the deprotection side products to proceed without releasing the oligonucleotide into the aqueous milieu. When freed from deprotection side products, the DNA oligonucleotide is thermolytically released from the support within 2 h under nearly neutral conditions (pH 7.2, 90 degrees C). The quality of these oligonucleotides is comparable to that of identical oligonucleotides synthesized from succinylated CPG supports in terms of shorter than full length oligonucleotide contaminants and overall yields. The versatility of the thermolytic CPG support 7 is further demonstrated by the synthesis of a DNA oligonucleotide (20-mer) and its conjugation with an azido and alkynyl groups at both 5'-and 3'-termini, respectively. The functionality of the (3',5')-heteroconjugated oligonucleotide 18 is verified by its circularization to the DNA oligonucleotide 19 under "click" chemistry conditions.     

A Comparison of Hybridization Efficiency between Flat Glass and Channel Glass Solid Supports

Two different solid supports, channel glass and flat glass, were compared for their affect on the sensitivity and efficiency of DNA hybridization reactions. Both solid supports were tested using a set of arrayed, synthetic oligonucleotides that are designed to detect short insertion/deletion polymorphisms (SIDPs). A total of 13 different human SIDPs were chosen for analysis. Capture probes, designed for this test set, were covalently immobilized on substrates. Hybridization efficiency was assessed using fluorescently labeled stacking probes which were preannealed to the target and then hybridized to the support-bound oligonucleotide array; the hybridization pattern was detected by fluorescence imaging. It was found that structural features of nucleic acid capture probes tethered to a solid support and the molecular basis of their interaction with targets in solution have direct implications on the hybridization process. Our results demonstrate that channel glass has a number of practical advantages over flat glass including higher sensitivity and a faster hybridization rate.     

An improved CPG support for the synthesis of 3'-amine-tailed oligonucleotides.

A new controlled-pore glass (CPG) support is described that allows for the direct synthesis of oligonucleotides bearing a 3'-aminohexyl tail. This solid support (AH-CPG) exhibits superior performance as compared to a commercially available 3'-amine CPG. The AH-CPG is prepared from 6-aminohexan-1-ol with a unique protecting group for the amine that also functions as the site of attachment to the CPG. A 3'-amine-tailed oligodeoxynucleotide (ODN) was prepared from this support using standard phosphoramidite coupling and deprotection conditions. The 3'-amine-tailed ODN was subsequently modified with an acridinylpropionic acid tetrafluorophenyl ester. Facile synthesis of the AH-CPG and the stability of the deprotected product makes this functionalized solid support especially useful for preparation of oligonucleotides bearing 3'-amine tails and other modifications.     

Postsynthetic on column RNA labeling via Stille coupling

Stille Coupling is a versatile C-C bond forming reaction with high functional group tolerance under mild conditions. Our on column synthesis concept for RNA modification is based on the incorporation of iodo substituted nucleotide precursors to RNA during automated standard solid phase synthesis via TBDMS-, TC-, and ACE- protecting group strategies. Subsequently, the RNA, still bound on solid support, is ready for orthogonal postsynthetic functionalization via Stille cross-couplings utilizing the advantages of solid phase synthesis. Several monomer test reactions were employed with 2-iodo adenosine and 5-iodo uridine and organostannanes as coupling partners under different conditions, changing the catalyst/ligand system, temperature, and reaction time as well as conventional heating and microwave irradiation. Finally, Stille cross-couplings under optimized conditions were transferred to fully protected 5-mer and 12-mer RNA oligonucleotides on-column. Deprotection and cleavage from solid support resulted in site-specifically labeled oligonucleotides. Derivatizations via Stille cross-couplings were performed initially with vinyltributylstannane as well as later with 2-furanyl-, 2-thiophene-, and benzothiophene-2-tributylstannanes yielding fluorescently functionalized RNA.     

Covalent attachment of oligonucleotides to solid supports.

Coupling efficiencies for the covalent attachment of oligonucleotides (17-29 bases in length) to solid supports derivatized with alkyl-amino and -carboxylic functionalities have been determined. Attachment efficiencies of 60-80% were obtained for coated long-chain alkylamino controlled pore glass (CPG) supports. Similar efficiencies of immobilization were observed for carboxyl-bearing supports, which additionally exhibited lower levels of non-covalent binding. The extent of terminally linked oligonucleotide was determined to be 50-55% of the overall attachment in the carbodiimide-mediated coupling reaction of a 5'-aminohexyl phosphoramidate derivative of a 29-mer to Sephacryl carboxyl support. While lower overall efficiencies of attachment were obtained in the reaction with Sephacryl N-hydroxysuccinimide-activated carboxyl support, greater than 80% of this coupling results in end-attached oligonucleotides.     

Formation of N-branched oligonucleotides as by-products in solid-phase oligonucleotide synthesis

During the synthesis of oligonucleotides by the standard phosphoramidite method using 2'-deoxycytidine- derivatized solid support, a side reaction was observed that gave rise to the formation of high molecular weight N-branched oligomers having two identical chains linked to the 3'-terminal 2'-deoxycytidine.Postsynthesis treatment with neat triethylamine trihydrofluoride selectively cleaved the phosphoramidate linkage and converted the N-branched oligomers back to the expected oligonucleotides.     

Photocleavable biotin phosphoramidite for 5'-end-labeling, affinity purification and phosphorylation of synthetic oligonucleotides.

We report the design, synthesis and evaluation of a non-nucleosidic photocleavable biotin phosphoramidite (PCB-phosphoramidite) which provides a simple method for purification and phosphorylation of oligonucleotides. This reagent introduces a photocleavable biotin label (PCB) on the 5'-terminal phosphate of synthetic oligonucleotides and is fully compatible with automated solid support synthesis. HPLC analysis shows that the PCB moiety is introduced predominantly on full-length sequences and is retained during cleavage of the synthetic oligonucleotide from the solid support and during subsequent deprotection with ammonia. The full-length 5-PCB-labeled oligonucleotide can then be selectively isolated from the crude oligonucleotide mixture by incubation with immobilized streptavidin. Upon irradiation with 300-350 nm light the 5'-PCB moiety is cleaved with high efficiency in <4 min, resulting in rapid release of affinity-purified 5'-phosphorylated oligonucleotides into solution. 5'-PCB-labeled oligonucleotides should be useful in a variety of applications in molecular biology, including cassette mutagenesis and PCR. As an example, PCB-phosphoramidite has been used for the synthesis, purification and phosphorylation of 50-and 60mer oligonucleotides.     

N-(3-Triethoxysilylpropyl)-4-(N'-maleimidylmethyl)cyclohexanamide (TPMC): a heterobifunctional reagent for immobilization of oligonucleotides on glass surface

A new heterobifunctional reagent, namely, N-(3-triethoxysilylpropyl)-4-(N'-maleimidylmethyl)cyclohexanamide (TPMC) was developed and its potentiality for fixing of thiol (-SH) modified oligonucleotides were tested. The covalent attachment of oligonucleotides with the reagent was achieved through its maleimide functionality at one end via stable thioether linkage while the other end bearing triethoxysilyl functionality has been utilized for coupling with the virgin glass surface with simplified methodologies. Immobilization of oligonucleotides was achieved by two alternating ways. The PATH-1 involves formation of conjugate of reagent and SH-modified oligonucleotides through thioether linkage and was subsequently immobilized on unmodified glass surface through triethoxysilyl group and alternatively, PATH-2 involves reaction of reagent first with unmodified glass surface to get maleimide functionality on the surface and then the SH-modified oligonucleotides were immobilized via thioether linkage. The specificity of immobilization was tested by hybridization study with complementary fluorescein labeled oligonucleotide strand.     

Solid phase DNA amplification: characterisation of primer attachment and amplification mechanisms

Different chemical methods used to attach oligonucleotides by their 5′-end on a glass surface were tested in the framework of solid phase PCR where surface-bound instead of freely-diffusing primers are used to amplify DNA. Each method was first evaluated for its capacity to provide a high surface coverage of oligonucleotides essentially attached via a 5′-specific linkage that satisfyingly withstands PCR conditions and leaves the 3′-ends available for DNA polymerase activity. The best results were obtained with 5′-thiol-modified oligonucleotides attached to amino-silanised glass slides using a heterobifunctional cross-linker reagent. It was then demonstrated that the primers bound to the glass surface using the optimal chemistry can be involved in attaching and amplifying DNA molecules present in the reaction mix in the absence of freely-diffusing primers. Two distinct amplification processes called interfacial and surface amplification have been observed and characterised. The newly synthesised DNA can be detected and quantified by radioactive and fluorescent hybridisation assays. These new surface amplification processes are seen as an interesting approach for attachment of DNA molecules by their 5′-end on a solid support and can be used as an alternative route for producing DNA chips for genomic studies.     

Porphyrin substituted phosphoramidites: new building blocks for porphyrin-oligonucleotide syntheses

Thymidine phosphoramidites containing trispyridylphenyl and tetraphenylporphyrin chromophores attached via a short amide linker in the 3'-position have been synthesized and used as building blocks in solid-phase synthesis of self-complementary 8-mer oligonucleotides 3'-T-5'-GCGCGCA-3' and 5'-ACGCGCGT-3'. To our knowledge, these are the first porphyrin-oligonucleotide conjugates carrying the porphyrin chromophores in the 3'-position. Chain assembly was achieved by automated solid-phase synthesis and by inexpensive straightforward 'in flask' modification of commercially available solid supported oligonucleotides. This approach allows the synthesis of modified oligonucleotides without using costly instrumentation for automated DNA synthesis. Porphyrin-containing self-complementary oligonucleotides are expected to be a valuable model for drug binding studies and determination of conformational changes in DNA sequences using circular dichroism.     

A convenient solid-phase method for synthesis of 3'-conjugates of oligonucleotides.

We present a new procedure for the preparation of 3'-conjugates of oligonucleotides through solid-phase synthesis. A suitable universal solid support was readily prepared using a series of peptide-like coupling reactions to incorporate first a spacer and then an L-homoserine branching unit. The N-alpha-position of the homoserine carries an Fmoc protecting group that is removed by treatment with piperidine to liberate an amino group suitable for attachment of the conjugate (e.g., small organic molecule, fluorescent group, cholesterol, biotin, amino acid, etc.) or for assembly of a short peptide. The side-chain hydroxyl group of the homoserine carries a trityl protecting group. After TFA deprotection, the hydroxyl group acts as the site for oligonucleotide assembly. An additional spacer, such as aminohexanoyl, may be incorporated easily between the conjugate molecule and the oligonucleotide. A number of examples of synthesis of 3'-conjugates of oligonucleotides and their analogues are described that involve standard automated oligonucleotide assembly and use of commercially available materials. The linkage between oligonucleotide and 3'-conjugate is chirally pure and is stable to conventional ammonia treatment used for oligonucleotide deprotection and release from the solid support. The homoserine-functionalized solid support system represents a simple and universal route to 3'-conjugates of oligonucleotides and their derivatives.     

SIGNIFICANT IMPROVEMENT OF QUALITY FOR LONG OLIGONUCLEOTIDES BY USING CONTROLLED PORE GLASS WITH LARGE PORES

A key factor influencing the quality of long oligonucleotides is the choice of controlled pore glass (CPG) which is used as a solid support during oligonucleotide synthesis. We studied the influence of CPG pore size on the quality of 75-mer oligonucleotides. Using electrophoresis and HPLC, we demonstrated failure modes that can occur at certain oligo lengths with 1000A pore size, and compared yield and purity of 75-mer oligos using 1000A and larger pore size CPG. We showed that oligonucleotides with much better quality are obtained using CPG with pore sizes of 1400A and larger. We also identified the key characteristics for CPG selection that lead to the best CPG performance.     

Significant improvement of quality for long oligonucleotides by using controlled pore glass with large pores

A key factor influencing the quality of long oligonucleotides is the choice of controlled pore glass (CPG) which is used as a solid support during oligonucleotide synthesis. We studied the influence of CPG pore size on the quality of 75-mer oligonucleotides. Using electrophoresis and HPLC, we demonstrated failure modes that can occur at certain oligo lengths with 1000A pore size, and compared yield and purity of 75-mer oligos using 1000A and larger pore size CPG. We showed that oligonucleotides with much better quality are obtained using CPG with pore sizes of 1400A and larger. We also identified the key characteristics for CPG selection that lead to the best CPG performance.     

New light labile linker for solid phase synthesis of 2'-O-acetalester oligonucleotides and applications to siRNA prodrug development

We report on the synthesis and properties of oligonucleotides containing 2′-O-(levulinic acid) and 2′-O-(amino acid) acetalesters. Given that esters serve as promoieties in several therapeutic prodrugs, we believe that these derivatives will have potential use as nucleic acid prodrugs. In addition, we report on the synthesis of a novel solid support with a photolabile linker that not only allows for the synthesis of oligonucleotides containing various 2′-O-acetalesters, but can be generally adopted to the synthesis of base-sensitive oligoribonucleotides. The release of oligonucleotides from this support is faster than with conventional linkers.     

Synthesis and Properties of Some (2′-5′) Linked Dinucleoside Monophosphates Modified with 3′-Difluoromethylene Groups

Abstract

The title dimers were prepared to investigate conditions required for the synthesis of 3′-difluoromethylene modified oligonucleotides on solid support. As a result a new synthetic cycle was developed that enabled the solid phase synthesis of the modified oligonucleotides.     

Solid-phase synthesis and side reactions of oligonucleotides containing O-alkylthymine residues

As part of our studies on the molecular mechanism of mutation [Chambers, R. W. (1982) in Molecular and Cellular Mechanisms of Mutagenesis (Lemontt, J. F., & Generoso, W. M., Eds.) pp 121-145, Plenum, New York and London], we wanted to prepare specific oligonucleotides carrying O2- or O4-alkylthymidine residues. Since O-alkylthymine moieties are known to be alkali labile, side reactions were expected during the deprotection procedures used for synthesis of oligonucleotides on a solid support by the classical phosphoramidite method. We have studied these side reactions in detail. Kinetic data show the deprotection procedures displace most O-alkyl groups at rates that make these procedures inappropriate for synthesis of most oligonucleotides carrying O-alkylthymine moieties. We describe alternative deprotection procedures, using readily accessible reagents, that we have used successfully to synthesize a series of oligonucleotides carrying several different O-alkylthymine moieties. The oligonucleotides synthesized are d(A-A-A-A-G-T-alkT-T-A-A-A-A-C-A-T), where alk = O2-methyl, O2-isopropyl, O4-methyl, O4-isopropyl, and O4-n-butyl. This work extends the previously described procedure for the chemical synthesis of oligonucleotides carrying an O4-methylthymine moiety [Li, B. F., Reese, C. B., & Swann, P. F. (1987) Biochemistry 26, 1086-1093] and reports the first chemical synthesis of an oligonucleotide carrying an O2-alkylthymine. The oligonucleotides synthesized have a sequence corresponding to the minus strand that is complementary to the viral strand at the start of gene G in bacteriophage phi X174 replicative form DNA where the normal third codon has been replaced with the ocher codon, TAA.     

Preactivated carboxyl linker for the rapid conjugation of alkylamines to oligonucleotides on solid support

A C10 linker phosphoramidite reagent terminated with a succinimidyl-activated carboxyl group was prepared and used to couple to the 5'-end of an oligonucleotide synthesized on a solid support. The succinimidyl-activated carboxyl functionality can be used for rapid conjugation of amines to oligonucleotides on solid support or it can be hydrolyzed to form a carboxylic acid functionality. The activated linker was successfully used for conjugation of several primary and secondary aliphatic amine derivatives (including biotin and fluorescein cadaverine) onto a solid support-bound 12-mer DNA oligonucleotide at scales ranging from 0.15 to 1.0 micromol. The overall yields of the conjugation products after AMA deprotection and cleavage from the solid support ranged from 43 to 75% of the total oligonucleotide product. This value is significant, as it includes oligonucleotide synthesis, coupling of the linker, and conjugation of the amine. In addition, the entire process of oligonucleotide synthesis, linker coupling, amine conjugation, deprotection, and cleavage of the oligonucleotide from solid support can be accomplished in 1 day.