QTL mapping reveals genetic architectures of malting quality between Australian and Canadian malting barley (<Emphasis Type="Italic">Hordeum vulgare</Emphasis> L.)

Australia and Canada are major exporters of malting barley (Hordeum vulgare L.), with Baudin from Australia and AC Metcalfe from Canada being the benchmark varieties for premium malting quality in the past 10 years. We used the barley doubled haploid population derived from a cross of Baudin and AC Metcalfe to map quantitative trait loci (QTLs) for malting quality. The results revealed different genetic architectures controlling malting quality for the two cultivars. Sixteen QTLs were identified and located on chromosomes 1H, 2H, 5H and 7H. The Australian barley Baudin mainly contributed to the malting quality QTL traits of high diastatic power and high β-glucanase on chromosome 1H, while Canadian barley AC Metcalfe mainly contributed to the QTL traits of high hot water extract, high free amino nitrogen, high α-amylase and low malt yield in chromosome 5HL telomere region. This study demonstrated the potential to breed new barley varieties with superior malting quality by integrating genes from Australian and Canadian malting barley varieties. This paper also provides methods to anchor traditional molecular markers without sequence information, such as amplified fragment length polymorphism markers, into the physical map of barley cv. ‘Morex’.     

Malting quality quantitative trait loci on a high-density map of Mikamo golden?×?Harrington cross in barley (Hordeum vulgare L.)

A high-density map consisting of 550 markers was constructed based on the segregation data of 95 doubled-haploid lines (DHLs) derived from the cross between a Japanese barley cultivar, Mikamo Golden and a North American barley cultivar, Harrington (MH-DHLs). Quality traits of malt extract (EX), total nitrogen (TN), soluble nitrogen (SN), Kolbach index (KI), diastatic power (DP), wort beta-glucan (WG) and viscosity (VS) were determined in three site/year crops. Quantitative trait loci (QTL) analyses were performed with these quality data sets, using the linkage map. Major QTL controlling EX, SN and KI were mapped on terminal region of 5H with Harrington as effective allele. Another QTL controlling EX was mapped on 2H with Mikamo Golden as effective allele. QTL controlling TN, DP, WG and VS were detected variably in terms of flanking markers and chromosomes depending on site/year. Cleaved amplified polymorphic sequences (CAPS) markers for EX based on the QTL detected on 2H and 5H were developed. Analysis of EX and genotypes of 33 malting barley cultivars from around the world as well as MH-DHLs revealed that the two CAPS marker on 2H and 5H affect EX by a significant difference, suggesting that the two CAPS markers were valuable for marker-assisted selection in malting barley breeding.     

QTL analysis of malting quality in barley based on the doubled-haploid progeny of two elite North American varieties representing different germplasm groups

Characterization of the determinants of economically important phenotypes showing complex inheritance should lead to the more effective use of genetic resources. This study was conducted to determine the number, genome location and effects of QTLs determining malting quality in the two North American barley quality standards. Using a doubled-haploid population of 140 lines from the cross of Harrington×Morex, malting quality phenotype data sets from eight environments, and a 107-marker linkage map, QTL analyses were performed using simple interval mapping and simplified composite interval mapping procedures. Seventeen QTLs were associated with seven grain and malting quality traits (percentage of plump kernels, test weight, grain protein percentage, soluble/total protein ratio, α-amylase activity, diastatic power and malt-extract percentage). QTLs for multiple traits were coincident. The loci controlling inflorescence type [vrs1 on chromosome 2(2H) and int-c on chromosome 4(4H)] were coincident with QTLs affecting all traits except malt-extract percentage. The largest effect QTLs, for the percentage of plump kernels, test weight protein percentage, S/T ratio and diastatic power, were coincident with the vrs1 locus. QTL analyses were conducted separately for each sub-population (six-rowed and two-rowed). Eleven new QTLs were detected in the subpopulations. There were significant interactions between the vrs1 and int-c loci for grain-protein percentage and S/T protein ratio. Results suggest that this mating of two different germplasm groups caused a disruption of the balance of traits. Information on the number, position and effects of QTLs determining components of malting quality may be useful for maintaining specific allele configurations that determine target quality profiles. Received: 28 May 1999 / Accepted: 9 November 1999     

Genetic architecture of quantitative trait loci associated with morphological and agronomic trait differences in a wild by cultivated barley cross.

Hordeum vulgare subsp. spontaneum is the progenitor of cultivated barley (Hordeum vulgare L.). Domestication combined with plant breeding has led to the morphological and agronomic characteristics of modern barley cultivars. The objective of this study was to map the genetic factors that morphologically and agronomically differentiate wild barley from modern barley cultivars. To address this objective, we identified quantitative trait loci (QTLs) associated with plant height, flag leaf width, spike length, spike width, glume length in relation to seed length, awn length, fragility of ear rachis, endosperm width and groove depth, heading date, flag leaf length, number of tillers per plant, and kernel color in a Harrington/OUH602 advanced backcross (BC2F8) population. This population was genotyped with 113 simple sequence repeat markers. Thirty QTLs were identified, of which 16 were newly identified in this study. One to 4 QTLs were identified for each of the traits except glume length, for which no QTL was detected. The portion of phenotypic variation accounted for by individual QTLs ranged from about 9% to 54%. For traits with more than one QTL, the phenotypic variation explained ranged from 25% to 71%. Taken together, our results reveal the genetic architecture of morphological and agronomic traits that differentiate wild from cultivated barley.     

Mapping of quantitative trait loci controlling barley flour pasting properties

Pasting properties are important characteristics of barley starch from a processing standpoint. A shorter time to peak viscosity and lower pasting temperature are favorable to both malting and food processing. This study was conducted to identify quantitative trait loci (QTLs) determining pasting properties of barley flour using a doubled haploid population of 177 lines from the cross between six-rowed Yerong and two-rowed Franklin. Yerong is a feed barley with a longer time to peak viscosity and a higher pasting temperature than the other parent Franklin which is a malting barley. Field trials were conducted in three different sites/years. Seven different parameters representing the pasting properties were measured using a Rapid Visco-analyser (RVA). DH lines showed significant differences in all seven parameters in most of the sites/years. For example, the pasting temperature of different DH lines ranged from 73.8 to 89.5 in 2006/2007 MTP field trial. Twenty one QTLs were associated with flour pasting properties. These QTLs were distributed on 11 chromosome regions. Genetic variance explained by these QTLs varies from 4.4 to 15.2%. The most important QTLs controlling the time to peak viscosity and pasting temperature were located on 1H, 2H, 3H and 7H. Results showed that some of the pasting properties can be effectively selected by the combination of several molecular markers.     

Comparative QTL analysis of early short-time drought tolerance in Polish fodder and malting spring barleys

Key message

An effective approach for the further evolution of QTL markers, may be to create mapping populations for locally adapted gene pools, and to phenotype the studied trait under local conditions.

Abstract

Mapping populations of Polish fodder and malting spring barleys (Hordeum vulgare L.) were used to analyze traits describing short-time drought response at the seedlings stage. High-throughput genotyping (Diversity Array Technology (DArT) markers) and phenotyping techniques were used. The results showed high genetic diversity of the studied populations which allowed the creation of high-density linkage maps. There was also high diversity in the physiological responses of the barleys. Quantitative trait locus (QTL) analysis revealed 18 QTLs for nine physiological traits on all chromosomes except 1H in malting barley and 15 QTLs for five physiological traits on chromosomes 2H, 4H, 5H and 6H in fodder barley. Chromosomes 4H and 5H contained QTLs which explained most of the observed phenotypic variations in both populations. There was a major QTL for net photosynthetic rate in the malting barley located on chromosome 5H and two major QTLs for overall photochemical performance (PI) located on 5H and 7H. One major QTL related to photochemical quenching of chlorophyll fluorescence was located on chromosome 4H in fodder barley. Three QTL regions were common to both mapping populations but the corresponding regions explained different drought-induced traits. One region was for QTLs related to PSII photosynthetic activity stress index in malting barley, and the corresponding region in fodder barley was related to the water content stress index. These results are in accordance with previous studies which showed that different traits were responsible for drought tolerance variations in fodder and malting barleys.     

Markers polymorphic among malting barley ( Hordeum vulgare L.) cultivars of a narrow gene pool associated with key QTLs

Barley used for malting is a fine-tuned organism, and it requires breeding within narrow gene pools for realistic cultivar enhancement. Significant phenotypic advance within such narrow gene pools has been achieved and the necessary genetic variability for breeding progress has been documented, but it was not well understood. This study was conducted to further characterize detectable genetic variability present within a select set of four closely related malting barley cultivars using three types of molecular markers: RFLP, PCR-RAPD and AFLP. The markers that identified polymorphism among the select malting cultivars tended to link with each other and to map in chromosomal regions associated with quantitative trait loci (QTLs) for agronomic and malting quality traits that differed among the four cultivars. Although RFLPs identified the least amount of polymorphism, the differences detected by the RFLPs best fit the chronology of the cultivars. These results indicate that a large amount of the genetic variability necessary for cultivar improvement may have originally been present in the breeding gene pool, but does not rule out de novo variation. Study of the populations from crosses within this narrow germplasm is needed to further elucidate the basis of the phenotypic variability found among these select barley cultivars.     

Detection and verification of malting quality QTLs using wild barley introgression lines

A malting quality quantitative trait locus (QTL) study was conducted using a set of 39 wild barley introgression lines (hereafter abbreviated with S42ILs). Each S42IL harbors a single marker-defined chromosomal segment from the wild barley accession ‘ISR 42-8’ (Hordeum vulgare ssp. spontaneum) within the genetic background of the elite spring barley cultivar ‘Scarlett’ (Hordeum vulgare ssp. vulgare). The aim of the study was (1) to verify genetic effects previously identified in the advanced backcross population S42, (2) to detect new QTLs, and (3) to identify S42ILs exhibiting multiple QTL effects. For this, grain samples from field tests in three different environments were subjected to micro malting. Subsequently, a line × phenotype association study was performed with the S42ILs in order to localize putative QTL effects. A QTL was accepted if the trait value of a particular S42IL was significantly (P < 0.05) different from the recurrent parent as a control, either across all tested environments or in a particular environment. For eight malting quality traits, altogether 40 QTLs were localized, among which 35 QTLs (87.5%) were stable across all environments. Six QTLs (15.0%) revealed a trait improving wild barley effect. Out of 36 QTLs detected in a previous advanced backcross QTL study with the parent BC₂DH population S42, 18 QTLs (50.0%) could be verified with the S42IL set. For the quality parameters α-amylase activity and Hartong 45°C, all QTLs assessed in population S42 were verified by S42ILs. In addition, eight new QTL effects and 17 QTLs affecting two newly investigated traits were localized. Two QTL clusters harboring simultaneous effects on eight and six traits, respectively, were mapped to chromosomes 1H and 4H. In future, fine-mapping of these QTL regions will be conducted in order to shed further light on the genetic basis of the most interesting QTLs.     

QTL Analysis in Recombinant Chromosome Substitution Lines and Doubled Haploid Lines Derived from a Cross between Hordeum vulgare ssp. vulgare and Hordeum vulgare ssp. spontaneum

Recombinant chromosome substitution lines (RCSLs) were developed in BC₃ generation to introduce segments of a wild barley strain ‘H602’ (Hordeum vulgare ssp. spontaneum) into a barley cultivar ‘Haruna Nijo’ (H. vulgare ssp. vulgare) genetic background. One hundred thirty four RCSLs were genotyped by 25 SSR and 60 EST markers, which were localized on a linkage map of doubled haploid lines (DHLs) derived from the same cross combination. Graphical genotyping revealed that the observed average substitution ratio of H602 segment (12.9%) agreed with the expected substitution ratio (12.5%), and a minimum set of 19 RCSLs represented the entire H602 genome. Phenotypes of five qualitative and nine quantitative traits were scored in both the RCSLs and DHLs. Five qualitative traits were localized as morphological markers on the linkage map of the DHLs, and these molecular markers were aligned on the respective chromosomal regions in the RCSLs. Simple and composite interval mapping procedures detected a total of 18 and 24 QTLs for nine qualitative traits on the RCSLs and DHLs, respectively. Several QTLs were localized at coincident or very close regions on both linkage maps. In spite of general inferior agronomic performances in wild barley, several H602 QTL alleles showed agronomically positive effects. These RCSLs should contribute to substitution of favorable alleles from wild barley into cultivated barley. These RCSLs are also available as sources of near isogenic lines, with which we can apply advanced genetic analysis methods such as isolation of QTLs and detection of epistatic interactions among QTLs.     

Mapping quantitative trait loci for a common bean (Phaseolus vulgaris L.) ideotype.

Breeding a model plant that encompasses individual traits thought to enhance yield potential, known as ideotype breeding, has traditionally focused on phenotypic selection of plants with desirable morphological traits. Broadening this breeding method to the molecular level through the use of molecular markers would avoid the environmental interactions associated with phenotypic selection. A population of 110 F5 recombinant inbred lines (RILs), derived from the cross between WO3391 and 'OAC Speedvale', was used to develop a genetic linkage map consisting of 105 random amplified polymorphic DNA (RAPD), simple sequence repeat (SSR), and sequence-tagged site (STS) markers. The map has a total length of 641 cM distributed across 8 linkage groups (LGs). Five of them were aligned on the core linkage map of bean. Twenty-one quantitative trait loci (QTLs) were identified over three environments for eight agronomic and architectural traits previously defined for a bean (Phaseolus vulgaris L.) ideotype. The QTLs were mapped to seven LGs with several regions containing QTLs for multiple traits. At least one QTL was located for each trait and a maximum of four were associated with lodging. Total explained phenotypic variance ranged from 10.6% for hypocotyl diameter to 45.4% for maturity. Some of the QTLs identified will be useful for early generation selection of tall, upright, high-yielding lines in a breeding program.     

Genetic analysis of grain and malt quality in an elite barley population

Quantitative trait loci (QTLs) associated with grain weight, grain width, kernel hardness and malting quality were mapped in a doubled haploid population derived from two elite Australian malting barley varieties, Navigator and Admiral. A total of 30 QTLs for grain weight, grain width and kernel hardness were identified in three environments, and 63 QTLs were identified for ten malting quality traits in two environments. Three malting quality traits, namely β-amylase, diastatic power and apparent attenuation limit, were mainly controlled by a QTL linked to the Bmy1 gene at the distal end of chromosome 4H encoding a β-amylase enzyme. Six other malting quality traits, namely α-amylase, soluble protein, Kolbach index, free amino-acid nitrogen, wort β-glucan and viscosity, had coincident QTL clustered on chromosomes 1HS, 4HS, 7HS and 7HL, which demonstrated the interdependence of these traits. There was a strong association between these malt quality QTL clusters on chromosomes 1HS and 7HL and the major QTL for kernel hardness, suggesting that the use of this trait to enable early selection for malting quality in breeding programs would be feasible. In contrast, the majority of QTLs for hot-water extract were not coincident with those identified for other malt quality traits, which suggested differences in the mechanism controlling this trait. Novel QTLs have been identified for kernel hardness on chromosomes 2HL and 7HL, hot-water extract on 7HL and wort β-glucan on 6HL, and the resulting markers may be useful for marker-assisted selection in breeding programs.     

Efficient construction of high-density linkage map and its application to QTL analysis in barley

Using a High Efficiency Genome Scanning (HEGS) system and recombinant inbred (RI) lines derived from the cross of Russia 6 and H.E.S. 4, a high-density genetic map was constructed in barley. The resulting 1,595.7-cM map encompassed 1,172 loci distributed on the seven linkage groups comprising 1,134 AFLP, 34 SSR, three STS and vrs1 (kernel row type) loci. Including PCR reactions, gel electrophoresis and data processing, 6 months of work by a single person was sufficient for the whole mapping procedure under a reasonable cost. To make an appraisal of the resolution of genetic analysis for the 95 RI lines based on the constructed linkage map, we measured three agronomic traits: plant height, spike exsertion length and 1,000-kernel weight, and the analyzed quantitative trait loci (QTLs) associated with these traits. The results were compared on the number of detected QTLs and their effects between a high-density map and a skeleton map constructed by selected AFLP and anchor markers. The composite interval mapping on the high-density map detected more QTLs than the other analyses. Closely linked markers with QTLs on the high-density map could be powerful tools for marker-assisted selection in barley breeding programs and further genetic analyses including an advanced backcross analysis or a map-based cloning of QTL. Electronic Supplementary Material Supplementary material is available in the online version of this article at Communicated by J.S. Heslop-Harrison     

Quantitative trait loci associated with resistance to Fusarium head blight and kernel discoloration in barley

Resistance to Fusarium head blight (FHB), deoxynivalenol (DON) accumulation, and kernel discoloration (KD) in barley are difficult traits to introgress into elite varieties because current screening methods are laborious and disease levels are strongly influenced by environment. To improve breeding strategies directed toward enhancing these traits, we identified genomic regions containing quantitative trait loci (QTLs) associated with resistance to FHB, DON accumulation, and KD in a breeding population of F_4:7 lines using restriction fragment length polymorphic (RFLP) markers. We evaluated 101 F_4:7 lines, derived from a cross between the cultivar Chevron and an elite breeding line, M69, for each of the traits in three or four environments. We used 94 previously mapped RFLP markers to create a linkage map. Using composite interval mapping, we identified 10, 11, and 4 QTLs associated with resistance to FHB, DON accumulation, and KD, respectively. Markers flanking these QTLs should be useful for introgressing resistance to FHB, DON accumulation, and KD into elite barley cultivars. Received: 8 November 1998 / Accepted: 8 January 1999     

Mapping of yield-related QTLs in pepper in an interspecific cross of <Emphasis Type="Italic">Capsicum annuum</Emphasis> and <Emphasis Type="Italic">C. frutescens</Emphasis>

An advanced backcross QTL study was performed in pepper using a cross between the cultivated species Capsicum annuum cv. Maor and the wild C. frutescens BG 2816 accession. A genetic map from this cross was constructed, based on 248 BC(2) plants and 92 restriction fragment length polymorphism (RFLP) markers distributed throughout the genome. Ten yield-related traits were analyzed in the BC(2) and BC(2)S(1) generations, and a total of 58 quantitative trait loci (QTLs) were detected; the number of QTLs per trait ranged from two to ten. Most of the QTLs were found in 11 clusters, in which similar QTL positions were identified for multiple traits. Unlike the high percentage of favorable QTL alleles discovered in wild species of tomato and rice, only a few such QTL alleles were detected in BG 2816. For six QTLs (10%), alleles with effects opposite to those expected from the phenotype were detected in the wild species. The use of common RFLP markers in the pepper and tomato maps enabled possible orthologous QTLs in the two species to be determined. The degree of putative QTL orthology for the two main fruit morphology traits-weight and shape-varied considerably. While all eight QTLs identified for fruit weight in this study could be orthologous to tomato fruit weight QTLs, only one out of six fruit shape QTLs found in this study could be orthologous to tomato fruit shape QTLs.     

Fine mapping of a malting-quality QTL complex near the chromosome 4H S telomere in barley

Malting quality has long been an active objective in barley (Hordeum vulgare L.) breeding programs. However, it is difficult for breeders to manipulate malting-quality traits because of inheritance complexity and difficulty in evaluation of these quantitative traits. Quantitative trait locus (QTL) mapping provides breeders a promising basis with which to manipulate quantitative trait genes. A malting-quality QTL complex, QTL2, was mapped previously to a 30-cM interval in the short-arm telomere region of barley chromosome 4H in a Steptoe/Morex doubled haploid population by the North American Barley Genome Project, using an interval mapping method with a relatively low-resolution genetic map. The QTL2 complex has moderate effects on several malting-quality traits, including malt extract percentage (ME), -amylase activity (AA), diastatic power (DP), malt -glucan content (BG), and seed dormancy, which makes it a promising candidate gene source in malting barley-cultivar development. Fine mapping QTL2 is desirable for precisely studying barley malting-quality trait inheritance and for efficiently manipulating QTL2 in breeding. A reciprocal-substitution mapping method was employed to fine map QTL2. Molecular marker-assisted backcrossing was used to facilitate the generation of isolines. Fourteen different types of Steptoe isolines, including regenerated Steptoe and 13 different types of Morex isolines, including regenerated Morex, were made within a 41.5-cM interval between MWG634 and BCD265B on chromosome 4H. Duplicates were identified for 12 Steptoe and 12 Morex isoline types. The isolines together with Steptoe and Morex were grown variously at three locations in 2 years for a total of five field environments. Four malting-quality traits were measured: ME, DP, AA, and BG. Few significant differences were found between duplicate isolines for these traits. A total of 15 putative QTLs were mapped; three for ME, four for DP, six for AA, and two for BG. Background genotype seemed to make a difference in expression/detection of QTLs. Of the 15 QTLs identified, ten were from the Morex and only five from the Steptoe background. By combining the results from different years, field environments, and genetic backgrounds and taking into account overlapping QTL segments, six QTLs can be conservatively estimated: two each for ME and AA and one each for DP and BG with chromosome segments ranging from 0.7 cM to 27.9 cM. A segment of 15.8 cM from the telomere (MWG634–CDO669) includes all or a portion of all QTLs identified. Further study and marker-assisted breeding should focus on this 15.8-cM chromosome region.     

Constructing a genetic linkage map and mapping quantitative trait loci for skeletal traits in Japanese flounder

A genetic linkage map of Japanese flounder was constructed using 165 doubled haploids (DHs) derived from a single female. A total of 574 genomic microsatellites (type II SSRs) and expressed sequence tag (EST)-derived markers (EST-SSRs) were mapped to 24 linkage groups. The length of linkage map was estimated as 1270.9 centiMorgans (cM), with an average distance between markers of 2.2 cM. The EST-SSRs were used together with type II SSR markers to construct the Japanese flounder genetic linkage map which will facilitate identify quantitative trait locus (QTL) controlling important economic traits in Japanese flounder. Thus, twelve skeletal traits at 2 years of age were measured for all DHs. Forty-one QTLs were detected on 14 linkage groups and totally account for a small proportion of phenotypic variation (4.5 to 17.3%). Most of QTLs detected distribute on linkage groups 5 (9 QTLs), 8 (9 QTLs), 9 (5 QTLs) and 20 (4 QTLs), in which, some QTLs perform the pleiotropy.     

Quantitative trait loci for agronomic traits in an elite barley population for Mediterranean conditions

Advances in plant breeding through marker-assisted selection (MAS) are only possible when genes or quantitative trait loci (QTLs) can contribute to the improvement of elite germplasm. A population of recombinant inbred lines (RILs) was developed for one of the best crosses of the Spanish National Barley Breeding Program, between two six-row winter barley cultivars Orria and Plaisant. The objective of this study was to identify favourable QTLs for agronomic traits in this population, which may help to optimise breeding strategies for these and other elite materials for the Mediterranean region. A genetic linkage map was developed for 217 RILs, using 382 single nucleotide polymorphism markers, selected from the barley oligonucleotide pool assay BOPA1 and two genes. A subset of 112 RILs was evaluated for several agronomic traits over a period of 2 years at three locations, Lleida and Zaragoza (Spain) and Fiorenzuola d’Arda (Italy), for a total of five field trials. An important segregation distortion occurred during population development in the region surrounding the VrnH1 locus. A QTL for grain yield and length of growth cycle was also found at this locus, apparently linked to a differential response of the VrnH1 alleles to temperature. A total of 33 QTLs was detected, most of them for important breeding targets such as plant height and thousand-grain weight. QTL × environment interactions were prevalent for most of the QTLs detected, although most interactions were of a quantitative nature. Therefore, QTLs suitable for MAS for most traits were identified.     

Identification of quantitative trait loci for agronomically important traits and their association with genic-microsatellite markers in sorghum

The identification of quantitative trait loci (QTLs) affecting agronomically important traits enable to understand their underlying genetic mechanisms and genetic basis of their complex interactions. The aim of the present study was to detect QTLs for 12 agronomic traits related to staygreen, plant early development, grain yield and its components, and some growth characters by analyzing replicated phenotypic datasets from three crop seasons, using the population of 168 F₇ RILs of the cross 296B × IS18551. In addition, we report mapping of a subset of genic-microsatellite markers. A linkage map was constructed with 152 marker loci comprising 149 microsatellites (100 genomic- and 49 genic-microsatellites) and three morphological markers. QTL analysis was performed by using MQM approach. Forty-nine QTLs were detected, across environments or in individual environments, with 1–9 QTLs for each trait. Individual QTL accounted for 5.2–50.4% of phenotypic variance. Several genomic regions affected multiple traits, suggesting the phenomenon of pleiotropy or tight linkage. Stable QTLs were identified for studied traits across different environments, and genetic backgrounds by comparing the QTLs in the study with previously reported QTLs in sorghum. Of the 49 mapped genic-markers, 18 were detected associating either closely or exactly as the QTL positions of agronomic traits. EST marker Dsenhsbm19, coding for a key regulator (EIL-1) of ethylene biosynthesis, was identified co-located with the QTLs for plant early development and staygreen trait, a probable candidate gene for these traits. Similarly, such exact co-locations between EST markers and QTLs were observed in four other instances. Collectively, the QTLs/markers identified in the study are likely candidates for improving the sorghum performance through MAS and map-based gene isolations.     

AB-QTL analysis in spring barley: III. Identification of exotic alleles for the improvement of malting quality in spring barley (<Emphasis Type="Italic">H. vulgare</Emphasis> ssp. <Emphasis Type="Italic">spontaneum</Emphasis>)

Malting quality is genetically determined by the complex interaction of numerous traits which are expressed prior to and, in particular, during the malting process. Here, we applied the advanced backcross quantitative trait locus (AB-QTL) strategy (Tanksley and Nelson, Theor Appl Genet 92:191–203, 1996), to detect QTLs for malting quality traits and, in addition, to identify favourable exotic alleles for the improvement of malting quality. For this, the BC₂DH population S42 was generated from a cross between the spring barley cultivar Scarlett and the wild barley accession ISR42-8 (Hordeum vulgare ssp. spontaneum). A QTL analysis in S42 for seven malting parameters measured in two different environments yielded 48 QTLs. The exotic genotype improved the trait performance at 18 (37.5%) of 48 QTLs. These favourable exotic alleles were detected, in particular, on the chromosome arms 3HL, 4HS, 4HL and 6HL. The exotic allele on 4HL, for example, improved α-amylase activity by 16.3%, fermentability by 0.8% and reduced raw protein by 2.4%. On chromosome 6HL, the exotic allele increased α-amylase by 16.0%, fermentability by 1.3%, friability by 7.3% and reduced viscosity by 2.9%. Favourable transgressive segregation, i.e. S42 lines exhibiting significantly better performance than the recurrent parent Scarlett, was recorded for four traits. For α-amylase, fermentability, fine-grind extract and VZ45 20, 16, 2 and 26 S42 lines, respectively, surpassed the recurrent parent Scarlett. The present study hence demonstrates that wild barley does harbour valuable alleles, which can enrich the genetic basis of cultivated barley and improve malting quality traits.     

DNA marking of some quantitative trait loci in the cultivated edible mushroom Pleurotus ostratus (Fr.) Kumm

Fungi of the genus Pleurotus, in particular, species Pleurotus ostreatus (common oyster mushroom) are among most cultivated fungi in the world. Due to intense rates of development of studies in this field, efficient breeding programs are highly required in the search for new P. ostreatus strains. The principal traits used worldwide for selecting strains are intensity of fruitbearing, fruit body cap color (for some consumptive markets), and mycelium growth rate. In this connection, the objective of this work was to study these quantitative traits and to find molecular markers, which could be employed to accomplish breeding programs. In general, we found 12 genomic loci (quantitative trait loci, QTLs) controlling mycelium growth rate of oyster and six QTLs responsible for the fruit body cap color. The genetic map of P. ostreatus was constructed, and all markers of quantitative traits found by us were located on this genetic map. The obtained linkage map can be a useful tool for the accomplishment of breeding programs to improve economically important traits of oyster mushroom.