3株杂色鲍致病菌——副溶血弧菌的16S-23SrDNA间区序列的分析

以细菌的16S rDNA 3′端和23S rDNA 5′端的高度保守区为引物,扩增了3株杂色鲍致病菌—副溶血弧菌（Vibrio parahaemolyticus）的16S23S rDNA 间区,克隆到pGEMT载体上,测序。用BLAST和 DNAstar软件对16S23S rDNA间区序列及其内的tRNA基因进行比较分析。结果表明副溶血弧菌ZSU008和ZSU009测出的16S23S rDNA 间区均有6条,间区类型也相同,分别为IGSGLAV、IGSGLV、IGSAG、IGSIA、IGSG和IGS0。其中IGSGLAV最大,包含tRNAGlu、tRNALys、tRNAAla和tRNAVal基因;IGSGLV包含tRNAGlu、tRNALys和tRNAVal基因;IGSAG包含tRNAAla和tRNAGlu基因;IGSIA,则为tRNAIle和tRNAAla基因;IGSG仅包含tRNAGlu基因;而IGS0最小,未包含任何tRNA。菌株ZSU010测出的16S23S rDNA IGS序列有5条,除缺少IGSAG外,其余的IGS类型均与ZSU008和ZSU009相同。与GenBank 内的副溶血弧菌IGS序列比较,发现副溶血弧菌所有类型的IGS的tRNA基因两端的非编码区具有较高的种内同源性。16S23S rDNA 间区结构的差异为建立一种新的副溶血弧菌检测方法奠定了基础。     

2株创伤弧菌的16S-23S rDNA间区的克隆、测序及分析

根据细菌的16SrDNA3’端和23SrDNA5’端的高度保守区设计引物,PCR扩增了2株创伤弧菌（Vibrio vulnificus）的16S-23SrDNA间区（Intergenic spacer,IGS）,克隆到pGEM-T载体上,测序。用BLAST和DNA star软件对16S-23SrDNA间区序列及其内的tRNA基因进行比较分析。结果表明,2株创伤弧菌共测出9条16S-23SrDNA间区序列,其中ZSU006测出5条,间区类型分别为：IGS^GLAV、IGS^GLV、IGS^LA、IGS^A和IGS^G.其中IGS^GLAv最大,包含tRNA^Glu、tRNA^Lys、tRNA^Ala。和tRNA^Val基因;IGS^GLV包含tRNA^Glu、tRNA^Lys。和tRNA^Val基因;IGS^LA,则包含tRNA^Ile和tRNA^Ala基因;IGS^G包含tRNA^Glu基因;而IGS^A仅包含tRNA^Ala基因。菌株CG021测出的16S-23SrDNA IGS序列有4条,除缺少IGS^A外,其余的IGS类型均与ZSU006的相同。与GenBank内的创伤弧菌ATCC27562的IGS序列比较,发现创伤弧菌所有类型的IGS的tRNA基因两端的非编码区具有较高的种内同源性。16S-23SrDNA间区结构的差异为建立一种新的创伤弧菌检测方法奠定了基础。     

池蝶蚌线粒体基因组全序列分析简

采用普通PCR扩增、SHOT-GUN测序、软件拼接首次获得了池蝶蚌(Hyriopsis schlegelii)线粒体基因组全序列。线粒体基因组全长为15939 bp,由13个蛋白质编码基因、22个tRNA基因、2个SrRNA基因和28个长度为1—393 bp的非编码区组成;除ND3-ND5、ND4L、ATP6、ATP8、COX1-COX3、tRNA-D、tRNA-H之外,其他大多数基因在L链编码。池蝶蚌线粒体全基因组序列、蛋白编码基因、tRNA基因、rRNA基因及非编码区的A+T含量分别为60.36%、59.84%、61.7%、60.23%及62.5%,与其他淡水蚌类一致,均表现出A+T偏好性,淡水蚌类线粒体基因组长度的差异主要表现在非编码区长度的差异。池蝶蚌mtDNA的COX2-12SrRNA区域基因排列存在差异,是ND3、tRNAHis、tRNAAla、tRNASer1、tRNASer2、tRNAGlu、ND2、tRNAMet 8个基因发生重组造成。22个tRNA基因都具有典型的三叶草二级结构,tRNA-E与tRNA-W间的非编码区含有一个ORF区,而控制区并未发现。从GenBank上下载的14种双壳纲贝类的mtDNA序列构建的系统进化树,显示池蝶蚌与三角帆蚌亲缘关系最近。研究结果为淡水珍珠蚌线粒体基因重排及进化特征提供理论依据。     

金针菇rDNA序列结构特征分析

rDNA序列中的ITS作为DNA barcoding广泛应用于真菌的系统发育与物种辅助鉴定,IGS被认为可以用于种内水平不同菌株的鉴别。食用菌中还没有完整的rDNA序列的报道。本研究采用二代和三代测序技术分别对金针菇单核菌株“6-3”进行测序,用二代测序的数据对三代测序组装得到的基因组序列进行修正,得到一个在基因完整性、连续性和准确性均较好的基因组序列,对比Fibroporia vaillantii rDNA序列,获得金针菇完整的rDNA序列。金针菇rDNA序列结构分析表明,它有8个rDNA转录单元,长度均为5 903bp,有9个基因间隔区,其长度有较大差异,3 909-4 566bp。rDNA转录单元中,各元件的序列长度分别为：18S rDNA 1 796bp、ITS1 234bp、5.8S rDNA 173bp、ITS2 291bp、28S rDNA 3 410bp。基因间间隔区中,IGS1 1 351-1 399bp、5S rDNA 124bp、IGS2 2 435-3 092bp。金针菇的5S、5.8S、18S、28S rDNA序列准确性得到转录组数据的验证,也得到系统发育分析结果的支持。多序列比对发现,不同拷贝的基因间间隔区序列（IGS1和IGS2）存在丰富的多态性,多态性来源于SNP、InDel和TRS（串联重复序列）,而TRS来源于重复单元的类型和数量。9个基因间间隔区之间,IGS1只有少量的SNP和InDel,IGS2不仅有SNP和InDel,还有TRS。本研究结果提示,在应用IGS进行种内水平不同菌株之间的鉴别时,需要选取不同拷贝之间的保守IGS序列。     

浙江沿海地区海产品及环境中副溶血弧菌的分离与主要毒力基因分析

2007~2008年间, 我们调查了浙江沿海地区海产品和养殖环境中副溶血弧菌的污染状况, 并分析了不同来源副溶血弧菌中主要毒力相关基因tdh、trh、ureC和T3SS2(vscC2、vcrD2)的分布特征及溶血表型与尿素酶表型。结果显示, 566份样品中共分离到395株副溶血弧菌, 检出率高达70%, 毒力相关基因分析结果发现, tdh基因阳性率为10.1%, trh与ureC基因阳性率分别为 20.0%与 11.1%, 40株tdh+菌中组成T3SS2的vscC2基因阳性率为32.5%, 其中38株tdh+菌的神奈川试验亦呈阳性; 但在44株trh+-ureC+菌株中, 尿素酶表型阳性只有6株。试验表明, 浙江沿海地区海产品及其养殖环境中副溶血弧菌污染状况比较严重, 且有相当比例的菌株携带毒力或疑似毒力基因。研究结果为深入探索副溶血弧菌的致病性、基因结构与功能(或表型)及其分子演化提供基础。     

VHH/TLH溶血素基因在海洋弧菌中分布的研究

哈维氏弧菌(V.harveyi)的VHH溶血素是对海水养殖鱼类的潜在致病因子。哈维氏弧菌的VHH溶血素基因与副溶血弧菌(V.parahaemolyticus)的TLH热不稳定性溶血素基因具有高度相似性,其氨基酸序列的相似性达到85.6 %。根据哈维氏弧菌vhhA溶血素基因序列,合成一个地高辛标记的VHH基因探针,利用其进行Southern Blot ,检测VHH溶血素基因在57株弧菌(包括26株国际标准菌株,20株哈维氏弧菌,11株副溶血弧菌)中的分布情况。结果显示,VHH基因探针与13株弧菌标准菌株有强杂交信号,包括2株溶藻胶弧菌(V.alginolyticus) ,2株哈维氏弧菌以及1株霍氏格里蒙菌(Grimontia hollisae) ,坎贝氏弧菌(V.campbellii) ,辛辛那提弧菌(V.cincinatiensis) ,费氏弧菌(V.fischeri) ,拟态弧菌(V.mimicus) ,飘浮弧菌(V.natriegens) ,副溶血弧菌,解蛋白弧菌(V.proteolyticus)和火神弧菌(V.logei)。与6株弧菌标准菌株有弱杂交信号,包括鳗弧菌(V.anguillarum) ,河口弧菌(V.aestuarianus) ,美人鱼发光杆菌(Photobacterium damselae subsp.damselae) ,河弧菌(V.fluvialis) ,弗尼斯弧菌(V.furnissii)和创伤弧菌(V.vulnificus) ,而另外7株弧菌标准菌株中无杂交信号。所有的哈维氏弧菌菌株至少含有一条杂交带,其中菌株VIB645 , VIB 648和SF-1分别含有2条杂交带。11株副溶血弧菌中均含有一条杂交带。上述数据表明,vhh/tlh溶血素基因广泛分布于弧菌中,尤其是哈维氏弧菌相关菌株和费氏弧菌相关菌株中。另外对鳗弧菌VIB 72 ,坎贝氏弧菌VIB 285 ,飘浮弧菌VIB 299和哈维氏弧菌VIB 647的vhh/tlh溶血素基因进行克隆并测序,其氨基酸序列与VHH溶血素和TLH溶血素氨基酸序列的同源性分别为67 %~99 %和69 %~91 %。对vhh/tlh溶血素基因在弧菌中的分布研究,将有助于进一步确定这类溶血素基因在病原弧菌致病性中的作用。     

酵母tRNA结合蛋白(43kD蛋白)羧端cDNA的克隆及其序列测定

为了研究酵母分子量为 4 3kD的tRNA结合蛋白的基因来源 ,通过溴化氰部分化学裂解此蛋白 ,产生的 18kD肽段经过蛋白质氨端序列测定 ,测得 18kD肽段氨端部分序列为AFTFKK .针对序列AFTFKK设计简并引物 ,利用简并PCR方法和cDNA的 3′末端的快速扩增方法 (3′RACE) ,成功克隆 4 3kD蛋白mRNA的 3′端序列 .DNA序列测定结果表明 ,该序列位于 3 磷酸甘油酸激酶 (PGK1)基因 10 0 3位— 170 0位 ,长度为 6 98bp ,编码 3 磷酸甘油酸激酶羧基端的 180氨基酸残基以及 3′端非翻译区 .结果证实 ,4 3kD蛋白的基因就是PGK1酶的基因     

池蝶蚌线粒体基因组全序列分析

采用普通PCR扩增、SHOT-GUN测序、软件拼接首次获得了池蝶蚌（Hyriopsis schlegelii）线粒体基因组全序列。线粒体基因组全长为15939 bp,由13个蛋白质编码基因、22个tRNA基因、2个SrRNA基因和28个长度为1393 bp的非编码区组成;除ND3-ND5、ND4L、ATP6、ATP8、COX1-COX3、tRNA-D、tRNA-H之外,其他大多数基因在L链编码。池蝶蚌线粒体全基因组序列、蛋白编码基因、tRNA基因、rRNA基因及非编码区的A+T含量分别为60.36%、59.84%、61.7%、60.23%及62.5%,与其他淡水蚌类一致,均表现出A+T偏好性,淡水蚌类线粒体基因组长度的差异主要表现在非编码区长度的差异。池蝶蚌mtDNA的COX2-12SrRNA区域基因排列存在差异,是ND3、tRNAHis、tRNAAla、tRNASer1、tRNASer2、tRNAGlu、ND2、tRNAMet 8个基因发生重组造成。22个tRNA基因都具有典型的三叶草二级结构,tRNA-E与 tRNA-W间的非编码区含有一个ORF区,而控制区并未发现。从GenBank上下载的14种双壳纲贝类的mtDNA序列构建的系统进化树,显示池蝶蚌与三角帆蚌亲缘关系最近。研究结果为淡水珍珠蚌线粒体基因重排及进化特征提供理论依据。       

糙刺参（Stichopus horrens）线粒体基因组及一种新的基因排列顺序

线粒体基因组序列在后口动物进化研究中有着重要的作用.本研究使用PCR方法获得糙刺参（Stichopus horrens）线粒体全基因组序列.该序列全长16257bp,包含13个蛋白编码基因,22个tRNA基因和2个rRNA基因.除了一个蛋白编码基因（nad6）和5个tRNA基因（tRNASer（UCN）,tRNAGln,tRNAAla,tRNAVal,tRNAAsp）在轻链上编码外,其余的基因都在重链上编码.糙刺参线粒体重链碱基有30.8%A,23.7%C,16.2%G,和29.3%T构成.假定的线粒体控制区长675bp.基因间间隔碱基长1～50bp,共227bp.11个基因间有重叠碱基,长1～10bp,共25bp.13个蛋白编码基因起始密码子均为ATG,终止密码子大多为TAA（nad3和nad4的为TAG）.亮氨酸编码频率最高（16.29%）,随后是丝氨酸（10.34%）和苯丙氨酸（8.37%）.所有的22个tRNA基因均能折叠成三叶草结构.通过和其他4种海参的线粒体基因排列顺序比较,本研究发现糙刺参的线粒体基因排列顺序是一种新的排列方式.     

三疣梭子蟹HMGBa基因克隆及其应答不同病原入侵的表达特征

为研究三疣梭子蟹(Portunus trituberculatus)高迁移率族蛋白B (High-mobility group box protein, HMGB)在其先天免疫中发挥的功能, 利用RACE技术首次克隆得到了三疣梭子蟹HMGBa基因, 命名为PtHMGBa。其cDNA序列全长1030 bp, 其中5′端非编码区(UTR)为94 bp, 3′端非编码区(UTR)为255 bp, 开放阅读框(ORF)为681 bp, 编码一个含有227个氨基酸, 分子量25.82 kD, 理论等电点为5.94的蛋白质。PtHMGBa蛋白包含2个HMG盒结构域和一个酸性尾部结构域。分析表明, 三疣梭子蟹HMGBa氨基酸序列与凡纳滨对虾(Litopenaeus vannamei) HMGBa相似度最高。实时荧光定量PCR结果显示, PtHMGBa基因在血细胞和肝胰腺的表达量最高, 在眼柄中表达量最低。在副溶血弧菌和WSSV感染过程中, PtHMGBa基因在肝胰腺和血细胞中均出现了表达上调。其中, 经副溶血弧菌感染后, 该基因在上述2种组织中分别于48h和6h达到表达量的峰值; 经WSSV感染后, 该基因在2种组织中均在12h达到表达量的峰值。结果表明PtHMGBa基因参与了三疣梭子蟹抵御外来病原的免疫响应, 研究为深入开展三疣梭子蟹和其他甲壳动物的免疫调控机理提供了科学依据。     

Collagen-like triple helix formation of synthetic (Pro-Pro-Gly)10 analogues: (4(S)-hydroxyprolyl-4(R)-hydroxyprolyl-Gly)10, (4(R)-hydroxyprolyl-4(R)-hydroxyprolyl-Gly)10 and (4(S)-fluoroprolyl-4(R)-fluoroprolyl-Gly)10.

For the rational design of a stable collagen triple helix according to the conventional rule that the pyrrolidine puckerings of Pro, 4-hydroxyproline (Hyp) and 4-fluoroproline (fPro) should be down at the X-position and up at the Y-position in the X-Y-Gly repeated sequence for enhancing the triple helix propensities of collagen model peptides, a series of peptides were prepared in which X- and Y-positions were altogether occupied by Hyp(R), Hyp(S), fPro(R) or fPro(S). Contrary to our presumption that inducing the X-Y residues to adopt a down-up conformation would result in an increase in the thermal stability of peptides, the triple helices of (Hyp(S)-Hyp(R)-Gly)(10) and (fPro(S)-fPro(R)-Gly)(10) were less stable than those of (Pro-Hyp(R)-Gly)(10) and (Pro-fPro(R)-Gly)(10), respectively. As reported by B?chinger's and Zagari's groups, (Hyp(R)-Hyp(R)-Gly)(10) which could have an up-up conformation unfavorable for the triple helix, formed a triple helix that has a high thermal stability close to that of (Pro-Hyp(R)-Gly)(10). These results clearly show that the empirical rule based on the conformational preference of pyrrolidine ring at each of X and Y residues should not be regarded as still valid, at least for predicting the stability of collagen models in which both X and Y residues have electronegative groups at the 4-position.     

Synthesis and luminescence properties of a blue-emitting Sr(3.5) Y(6.5) O(2) (PO(4) )(1.5) (SiO(4) )(4.5) :Eu(2+) phosphor

A novel blue‐emitting Sr_3.5Y_6.5O₂(PO₄)_1.5(SiO₄)_4.5:Eu²⁺ phosphor was synthesized via a solid‐state reaction. Powder X‐ray diffraction (XRD) analysis demonstrated that the Sr_3.5Y_6.5O₂(PO₄)_1.5(SiO₄)_4.5 host had a hexagonal crystal structure in the space group P6₃/m and unit cell parameters a = 9.418 Å, c = 6.900 Å. The as‐prepared phosphor showed a blue emission and all the main emission peaks were located at around 466 nm for different excitation wavelengths of 297, 333 and 391 nm. The temperature dependence of the photoluminescence property was investigated in the range 20–250 °C, and the emission intensity decreased to 71% of the initial value at room temperature on increasing the temperature to 150 °C. According to the classical theory of fluorescent thermal quenching, the activation energy (ΔE) for the thermal quenching luminescence of the as‐prepared Sr_3.45Y_6.5O₂(PO₄)_1.5(SiO₄)_4.5:0.05Eu²⁺ phosphor was determined to be 0.20 eV. Copyright © 2011 John Wiley & Sons, Ltd.     

Archaeobotany of capers (Capparis) (Capparaceae)

The origins of capers, their use and cultivation are discussed. Capers seeds and charcoal are often recovered from archaeological sites of the Mediterranean and West Asia. These are referred to as C. Spinosa L. This is mostly a group of cultivars restricted to localities surrounding the Western Mediterranean and some places in the Eastern Mediterranean. Identification of the findings is discussed in terms of seed morphology, present distribution and ancient uses of C. aegyptia Lam., C. sicula Veill., C. cartilaginea Decne, C. orientalis Veill., C. decidua (Forssk.) Edgew. and other species. Citations of Capparis in early Rabbinic, Mesopotamian and Greco-Roman texts are presented. Received June 3, 2002 / Accepted October 8, 2002 Correspondence to: D. Rivera     

Biology of Bactrocera (Zeugodacus) tau (Walker) (Diptera: Tephritidae)

The biology of the fruit fly Bactrocera tau, an important horticultural pest, was studied under laboratory conditions at 25°C and 60–70% relative humidity on Cucurbita maxima. The duration of mating averaged 408.03 ± 235.93 min. After mating, the female fly had a preoviposition period of 11.7 ± 4.49 days. The oviposition rate was 9.9 ± 8.50 eggs and fecundity was 464.6 ± 67.98 eggs/female. Eggs were elliptical, smooth and shiny white, turning darker as hatching approached, and measured 1.30 ± 0.07 mm × 0.24 ± 0.04 mm. The chorion has polygonal microsculpturing and is species-specific with polygonal walls. The egg period lasts for 1.3 ± 0.41 days. The duration of the larval period is 1.2 ± 0.42, 1.7 ± 0.48 and 4.0 ± 0.94 days for first, second and third instars, respectively. Pupation occurs in the sand or soil and pupal periods are 7.0 ± 0.47 days. The life cycle from egg to adult was completed in 14.2 ± 1.69 days; the longevity of mated females and males was 130.33 ± 14.18 and 104.66 ± 31.21 days, respectively. At least two to three generations were observed from June 2008 to June 2009.     

Role of tfdC(I)D(I)E(I)F(I) and tfdD(II)C(II)E(II)F(II) gene modules in catabolism of 3-chlorobenzoate by Ralstonia eutropha JMP134(pJP4)

The enzymes chlorocatechol-1,2-dioxygenase, chloromuconate cycloisomerase, dienelactone hydrolase, and maleylacetate reductase allow Ralstonia eutropha JMP134(pJP4) to degrade chlorocatechols formed during growth in 2,4-dichlorophenoxyacetate or 3-chlorobenzoate (3-CB). There are two gene modules located in plasmid pJP4, tfdC(I)D(I)E(I)F(I) (module I) and tfdD(II)C(II)E(II)F(II) (module II), putatively encoding these enzymes. To assess the role of both tfd modules in the degradation of chloroaromatics, each module was cloned into the medium-copy-number plasmid vector pBBR1MCS-2 under the control of the tfdR regulatory gene. These constructs were introduced into R. eutropha JMP222 (a JMP134 derivative lacking pJP4) and Pseudomonas putida KT2442, two strains able to transform 3-CB into chlorocatechols. Specific activities in cell extracts of chlorocatechol-1,2-dioxygenase (tfdC), chloromuconate cycloisomerase (tfdD), and dienelactone hydrolase (tfdE) were 2 to 50 times higher for microorganisms containing module I compared to those containing module II. In contrast, a significantly (50-fold) higher activity of maleylacetate reductase (tfdF) was observed in cell extracts of microorganisms containing module II compared to module I. The R. eutropha JMP222 derivative containing tfdR-tfdC(I)D(I)E(I)F(I) grew four times faster in liquid cultures with 3-CB as a sole carbon and energy source than in cultures containing tfdR-tfdD(II)C(II)E(II)F(II). In the case of P. putida KT2442, only the derivative containing module I was able to grow in liquid cultures of 3-CB. These results indicate that efficient degradation of 3-CB by R. eutropha JMP134(pJP4) requires the two tfd modules such that TfdCDE is likely supplied primarily by module I, while TfdF is likely supplied by module II.     

The helix-coil transitions of poly (dA)-poly (dT) and poly (dA-dT)-poly (dA-dT)

Helix–coil transition curves are calculated for poly (dA) poly(dT) and poly (dA-dT) poly (dA-dT) using the integral equation approach of Goel and Montroll.⁵ The transitions are described by the loop entropy model with the exponent of the loop entropy factor, k, remaining an arbitrary constant. The theoretical calculations are compared with experimental transition curves of the two polymers. Results indicate that the stacking energies for these two polymers differ by about 1 kcal/mole of base pairs. Also, a fit between theory and experiment was not possible for k > 1.70.     

Spectroscopic investigations of Er(3+) :CdO-Bi(2) O(3) -B(2) O(3) glasses

This article reports on the optical properties of Er³⁺ ions doped CdO–Bi₂O₃–B₂O₃ (CdBiB) glasses. The materials were characterized by optical absorption and emission spectra. By using Judd–Ofelt theory, the intensity parameters Ω_λ (λ = 2, 4, 6) and also oscillatory strengths were calculated from the absorption spectra. The results were used to compute the radiative properties of Er³⁺:CdBiB glasses. The concentration quenching and energy transfer from Yb³⁺–Er³⁺ were explained. The stimulated emission cross‐section, full width at half maximum (FWHM) and FWHM × values are also calculated for all the Er³⁺:CdBiB glasses. Copyright © 2011 John Wiley & Sons, Ltd.     

Copper (II) and cobalt (II) complexes of chiral tetrathiafulvalene-oxazoline (TTF-OX) and tetrathiafulvalene-thiomethyl-oxazoline (TTF-SMe-OX) derivatives

Synthesis and single crystal X-ray structures of the first paramagnetic transition metal complexes containing chiral ethylenedithio-tetrathiafulvalene-oxazoline (EDT-TTF-OX) 1a-c and ethylenedithio-tetrathiafulvalene-thiomethyloxazoline 2 (EDT-TTF-(SMe)OX) ligands based on copper (II) and cobalt (II) are described. The racemic [EDT-TTF-OX][Cu(hfac)₂] complex 3a crystallizes in the triclinic centrosymmetric space group , whereas the enantiopure counterparts 3b-c crystallize in the triclinic non-centrosymmetric space group P1. Cu(II) adopts a distorted square pyramidal coordination geometry, a much weaker Cu?S_TTF interaction also being identified. The same coordination pattern around Cu(II) is observed in the complex [(rac)-EDT-TTF-(SMe)OX][Cu(hfac)₂] (4) in spite of the bidentate nature of the redox active ligand. DFT theoretical calculations afforded two equilibrium configurations for a corresponding model complex, in which the metal centre establishes secondary coordination either with one S_TTF or with the SMe group. The same ligand coordinates the cobalt (II) to afford the octahedral complex [(rac)-EDT-TTF-(SMe)OX][Co(hfac)₂] (5). In all these novel complexes, the paramagnetic centres are structurally and magnetically isolated. Cyclic voltammetry measurements show the stability of the radical cation species.     

The larval head of Exechia (Mycetophilidae) and Bibio (Bibionidae) (Diptera)

Exechia and Bibio have retained several plesiomorphic groundplan features of Diptera and Bibionomorpha, including a fully exposed and sclerotized head capsule, the transverse undivided labrum, the absence of movable premandibles, and undivided mandibles without combs. The fusion of the hypostomal bridge with the head capsule and largely reduced antennae are derived features shared by both taxa. The absence of teeth at the anterior hypostomal margin is a potential autapomorphy of Bibionomorpha. A basal position of Anisopodidae is suggested by a number of plesiomorphies retained in this family. Apomorphies of Bibionomorpha excluding Anisopodidae are the reduction of tentorial elements, the partial fusion of the labrum and clypeus, one-segmented antennae, the absence of a separate submental sclerite, the loss of the labial palpus, and the reduction of the pharyngeal filter apparatus. Head structures of Bibio are largely unmodified. The subprognathous orientation is one of few autapomorphic features. In contrast, the mouthparts of Exechia are highly modified in correlation with the specialized food uptake. The rasping counterrotating movements of maxillae and mandibles with teeth oriented in opposite directions are carried out by strongly developed extensors and flexors of the paired mouthparts. The modified labium mechanically supports the “drill head” formed by the mandibles und maxillae. The necessary stability of the head capsule is provided by the hypostomal bridge which also compensates the far-reaching reduction of the tentorium.