高乌甲素磷脂复合物纳米粒的制备、表征及药动学研究

采用溶剂挥发法制备高乌甲素磷脂复合物,薄膜超声法制备高乌甲素磷脂复合物固体脂质纳米粒,并考察基本理化性质。SD大鼠分别灌胃给予高乌甲素及其磷脂复合物固体脂质纳米粒,比较药动学特征及生物利用度。结果表明,高乌甲素磷脂复合物固体脂质纳米粒平均粒径为(224.37±1.93)nm,Zeta电位为(-6.14±0.09)m V,包封率为(85.08±1.84)%。体外释药符合Weibull模型。药动学结果显示,Tmax,Cmax,AUC0~t和AUC0~?均具有统计学意义(P0.05或P0.01),口服吸收生物利用度提高了2.58倍。因此,高乌甲素磷脂复合物固体脂质纳米粒可有效提高高乌甲素的口服吸收生物利用度。     

胆甾醇基γ-聚谷氨酸负载阿霉素纳米胶束的制备与体内外释药性能评价

笔者制备了胆甾醇基γ-聚谷氨酸负载阿霉素纳米胶束(DOX/NPs),并考察了该载药纳米胶束体系的形态与粒径、载药量、包封率以及体内外释药的特性。结果表明:DOX/NPs的最佳载药量为22.4%,包封率为90.2%,平均粒径为(312.3±7.2)nm,电镜下观察呈现明显的核壳结构。体外释药结果显示,DOX/NPs能延缓阿霉素的释放,并具有p H敏感的释药特性。小鼠体内释药结果表明:阿霉素经包埋后其消除半衰期(t1/2)、药时曲线下面积(AUC)、平均滞留时间(MRT)均明显大于游离阿霉素,达到了药物缓释的目的。     

长春新碱阳离子纳米结构脂质载体及其小肠吸收的研究

目的:硫酸长春新碱作为一种细胞毒型抗肿瘤药物,临床上多用其注射剂,虽应用广泛,但存在较多缺点,如药物半衰期短,代谢速率快以及毒副作用明显。本文目的是制备包载长春新碱和十二烷基磺酸钠的阳离子纳米结构脂质载体,并对其进行评价。方法:用复乳挥发法制备出目标脂质纳米粒;利用激光粒度仪对其粒径及zeta电位进行检测;利用高效液相色谱法对其包封率和载药量进行测定;透析法检测纳米粒的体外释放行为;用小肠吸收法评价纳米粒的促进吸收作用。结果:制得的纳米粒的平均粒径为(192.4±4.14)nm,多分散系数(PDI)为0.184±0.015,包封率为32.28%,Zeta电位为(30.6±4.09)m V,载药量为(1.56±0.10)%;体外释放实验显示在pH=7.4的中性释放介质中,硫酸长春新碱脂质纳米粒表现出缓释特性;小肠吸收实验表明十二烷基磺酸钠的加入和阳离子纳米粒的修饰可提高小肠对药物的吸收。结论:阳离子硫酸长春新碱纳米结构脂质载体具有缓释效果,并可以促进小肠对药物的吸收。     

青藤碱磷脂复合物的制备、表征及体外透皮研究

溶剂挥发法制备制备青藤碱磷脂复合物。对制备的磷脂复合物进行X射线衍射(XRD)和核磁共振(NMR)分析。采用改进Franz扩散池进行离体SD大鼠皮渗透实验,并考察其体外透皮特性。XRD结果显示青藤碱以无定型状态存在于磷脂复合物中。NMR图谱显示青藤碱与磷脂酰胆碱发生氢键或分子间作用力。SD大鼠透皮实验显示青藤碱,磷脂复合物的渗透速率、增渗倍数及12 h内的累积渗透量均大于青藤碱原料药。因此,磷脂复合物能明显提高青藤碱的经皮透过量。     

壳聚糖-有机累托石/海藻酸钠复合纳米粒的制备

目的:以BSA作为模型药物,制备壳聚糖季铵盐-OREC复合物纳米微粒,建立一种安全有效的药物控释传递系统。方法:超声条件下,制备不同质量比的具有壳聚糖硅酸盐插层结构的复合物纳米微粒,观察其形态学特征、进行红外光谱分析。同时,测定OREC对BSA包封率和载药量的影响。结果:成功制备了不同质量比的OREC-HTCC纳米粒子。电镜结果显示纳米粒呈圆球形,均匀,平均粒径约为30nm。红外图谱分析证实,HTCC插入了OREC插层中,BSA成功地包裹入HTCC-ALG/OREC混合材料制备的纳米微粒。加入OREC后,纳米粒子的包封率及载药量均明显提高,但随着加入量的增加,包封率及载药量逐渐减少。结论:OREC-HTCC纳米粒子是良好的蛋白药物载体,具有粒径小、包封率高、缓释效果好等优点,为CS-OREC作为潜在的药物给药系统的进一步应用提供科学依据。     

靶向肿瘤新生血管纳米粒的构建和质量控制

目的：制备F56多肽修饰的长春新碱纳米粒（F56-VCR-NP）,并建立其质量控制方法。方法：乳化－溶剂挥发法优化制备F56．VCR-NP：HPLC法测定其载药量、包封率,透射电镜下观察其形态,激光粒度分析仪测定其粒径和Zeta电位,CBQCA试剂盒测定纳米粒表面多肽密度,XPS进行表面元素分析。结果：优化制备的F56－VCR-NP粒径约为153nm,Zeta电位为－20．8mv,包封率为21．4％,载药量为1．9％,多肽连接效率为26．3％。结论：以聚乙二醇－聚乳酸（PEG-PLA）为原料,长春新碱为模型药物,成功制备出纳米粒子,并建立起有效的质量控制方法,对该实验样品进行了表征。结果表明此类纳米粒子尺寸均匀,表面多价连接F56多肽,载药量和包封率稳定可控,工艺成熟。     

载阿霉素PLGA纳米微球的制备及性质研究

目的:制备新型癌症化疗制剂载阿霉素(Adriamycin)、聚乳酸-羟基乙酸共聚物(PLGA)纳米微球(ADM-PLGA-NP),研究其性质及体外释药特点。方法:以聚乳酸-羟基乙酸共聚物为包封材料,阿霉素为模型药物,采用复乳蒸发法制备ADM-PLGA-NP,扫描电镜观察微球形态,激光粒度分析仪检测粒径分布,紫外分光光度法计算载药率及包封率,体外药物释放实验考察微球对ADM的缓释作用。结果:ADM-PLGA-NP外观呈球形,平均粒径约(237±12.7)nm,载药量及包封率分别为(6.42±1.67)%和(53.82±8.34)%,药物在体外缓慢释放,5 d累积释放量达85%。结论:通过复乳蒸发法制备的ADM-PLGA-NP性质稳定,具有药物缓释性,有望成为一种新型的药物化疗载体。     

可德兰多糖载药微粒的构建、表征及其缓释作用

利用具有三螺旋结构的可德兰多糖作为载体,制备二十二碳六烯酸(DHA)的载药微粒。利用粒径、表面电位测定、红外光谱法、粉末X-射线衍射法等方式表征其载药微粒,并分析了载药微粒的体外缓释作用。结果表明,载药微粒平均载药量为6.4%,包封率为56.6%,平均有效粒径为291 nm。红外光谱法、粉末X-射线衍射等分析均表明形成了以可德兰多糖为主体的载药微粒,结晶度的降低能够增加载药微粒的溶解度。另外,体外缓释实验也证明了载药微粒具有一定的缓释性能。可德兰多糖作为载体制备的载药微粒具有一定的缓释性,在食品或医药行业中有广泛的利用前景。并为多糖作为载体构建具有一定缓释性的载药微粒的研究提供了理论依据。     

共载依克立达和阿霉素的PBM-Hz-PEG纳米粒制备与性能研究

摘要 目的：研究不同比例依克立达（ELC）和阿霉素（DOX）的联合抗肿瘤效果,确定最佳联用比例。以生物可降解材料聚苹果酸苄基酯（PBM）为载体包封两种药物,得到一种酸敏感纳米胶束。方法：以L-天冬氨酸为原料通过内酯开环法制备PBM,并以酸敏感的腙键（Hz）连接PEG,得到嵌段聚合物PBM-Hz-PEG,红外光谱和核磁氢谱对其结构进行表征。动态透析法制备纳米胶束,测定纳米胶束的粒度、分散系数（PDI）、临界胶束浓度（CMC）及其载药量（DL）、包封率（EE）。动态透析法模拟胶束的体外释药性能,采用三阴性乳腺癌MDA-MB-231细胞系考察载药纳米胶束的体外细胞毒性。结果：①ELC能够增敏DOX,二者摩尔比为1:3时有最强肿瘤抑制作用。②经红外光谱和核磁共振氢谱表征,嵌段共聚物PBM-Hz-PEG成功合成。③空白纳米胶束的粒径为69.67±11.55 nm,PDI为0.245 ± 0.026,CMC值为3.9 μg?mL^-1;载药纳米胶束粒径略大,粒径在96.92 ~ 113.47 nm之间,ELC和DOX的载药量与投料比一致。④载药纳米胶束在pH 7.4和pH 6.0时的药物释放率曲线和体外细胞毒性试验证实载药胶束具有良好的酸敏特性。结论：ELC和DOX联用有较强的肿瘤抑制作用,PBM是二者的优良载体。该PBM-Hz-PEG纳米胶束载药率高,其特有的酸敏性能够有效降低药物对正常组织的毒副作用,具有肿瘤组织富集释放特性,有望成为一种新型智能释药平台。     

载HCPT纳米粒的制备及其体外抗肿瘤活性研究

目的:制备载羟基喜树碱(HCPT)的PLGA-hyd-PEG-FA纳米粒(HCPT@PLGA-hyd-PEG-FA),并对其体外抗肿瘤活性进行研究。方法:采用乳化溶剂挥发法制备HCPT@PLGA-hyd-PEG-FA,通过单因素试验考察超声功率、聚合物浓度、PVA浓度、水相和油相体积比及投药量对纳米粒粒径的影响;采用zeta电位及激光粒度分析仪测定纳米粒的粒径及zeta电位,用透射电镜(TEM)观察其形态;采用透析法评价HCPT@PLGA-hyd-PEG-FA的体外释药特性;采用MTT法测定HCPT@PLGA-hyd-PEG-FA对HepG2细胞的细胞毒性。结果:HCPT@PLGA-hyd-PEG-FA平均粒径约为109±3 nm,zeta电位为-11.57 mV,载药量为5.6%,TEM显示其为球形;体外释药结果表明HCPT@PLGA-hyd-PEG-FA对HCPT的释放具有p H值依赖性;HCPT和HCPT@PLGA-hyd-PEG-FA的IC50值分别为474.6 ng/mL和286.0 ng/mL。结论:HCPT@PLGA-hyd-PEG-FA体外释药性能良好,HCPT@PLGA-hyd-PEG-FA的细胞毒性明显大于游离的HCPT,值得进一步研究。     

Preparation and Characterization of Fenofibrate-Loaded Nanostructured Lipid Carriers for Oral Bioavailability Enhancement

The aim of this study is to investigate the potential of nanostructured lipid carriers (NLCs) in improving the oral bioavailability of a lipid lowering agent, fenofibrate (FEN). FEN-loaded NLCs (FEN-NLCs) were prepared by hot homogenization followed by an ultrasonication method using Compritol 888 ATO as a solid lipid, Labrafil M 1944CS as a liquid lipid, and soya lecithin and Tween 80 as emulsifiers. NLCs were characterized in terms of particle size and zeta pote\ntial, surface morphology, encapsulation efficiency, and physical state properties. Bioavailability studies were carried out in rats by oral administration of FEN-NLC. NLCs exhibited a spherical shape with a small particle size (84.9 ± 4.9 nm). The drug entrapment efficiency was 99% with a loading capacity of 9.93 ± 0.01% (w/w). Biphasic drug release manner with a burst release initially, followed by prolonged release was depicted for in vitro drug release studies. After oral administration of the FEN-NLC, drug concentration in plasma and AUC_t-∞ was fourfold higher, respectively, compared to the free FEN suspension. According to these results, FEN-NLC could be a potential delivery system for improvement of loading capacity and control of drug release, thus prolonging drug action time in the body and enhancing the bioavailability.KEY WORDS: bioavailability, fenofibrate, nanoparticles, nanostructured lipid carriers     

Recent Advances in Lipid Nanoparticle Formulations with Solid Matrix for Oral Drug Delivery

Lipid nanoparticles based on solid matrix have emerged as potential drug carriers to improve gastrointestinal (GI) absorption and oral bioavailability of several drugs, especially lipophilic compounds. These formulations may also be used for sustained drug release. Solid lipid nanoparticle (SLN) and the newer generation lipid nanoparticle, nanostructured lipid carrier (NLC), have been studied for their capability as oral drug carriers. Biodegradable, biocompatible, and physiological lipids are generally used to prepare these nanoparticles. Hence, toxicity problems related with the polymeric nanoparticles can be minimized. Furthermore, stability of the formulations might increase than other liquid nano-carriers due to the solid matrix of these lipid nanoparticles. These nanoparticles can be produced by different formulation techniques. Scaling up of the production process from lab scale to industrial scale can be easily achieved. Reasonably high drug encapsulation efficiency of the nanoparticles was documented. Oral absorption and bioavailability of several drugs were improved after oral administration of the drug-loaded SLNs or NLCs. In this review, pros and cons, different formulation and characterization techniques, drug incorporation models, GI absorption and oral bioavailability enhancement mechanisms, stability and storage condition of the formulations, and recent advances in oral delivery of the lipid nanoparticles based on solid matrix will be discussed.     

Preparation and Enhanced Oral Bioavailability of Cryptotanshinone-Loaded Solid Lipid Nanoparticles

In this study, solid lipid nanoparticles (SLNs) were successfully prepared by an ultrasonic and high-pressure homogenization method to improve the oral bioavailability of the poorly water-soluble drug cryptotanshinone (CTS). The particle size and distribution, drug loading capacity, drug entrapment efficiency, zeta potential, and long-term physical stability of the SLNs were characterized in detail. A pharmacokinetic study was conducted in rats after oral administration of CTS in different SLNs, and it was found that the relative bioavailability of CTS in the SLNs was significantly increased compared with that of a CTS-suspension. The incorporation of CTS in SLNs also markedly changes the metabolism behavior of CTS to tanshinone IIA. These results indicate that CTS absorption is enhanced significantly by employing SLN formulations, and SLNs represent a powerful approach for improving the oral absorption of poorly soluble drugs.     

Prolonged release biodegradable vesicular carriers for rifampicin--formulation and kinetics of release

An attempt has been made to design suitable liposome and niosome-encapsulated drug delivery system for rifampicin and evaluated the same in vitro and in vivo. A modified lipid layer hydration method was employed to prepare these vesicular carriers. The formulated systems were characterized in vitro for size distribution analysis, drug entrapment, drug release profiles and vesicular stability at different conditions of storage. In vivo drug kinetics was evaluated in normal, healthy albino rats for niosomal formulation upon subcutaneous injection and various pharmacokinetic parameters were determined. Niosomes and liposomes exhibited mean diameter of 9.73 and 11.87 microns with entrapment efficiencies of 30.5 and 34.2% respectively. Both the products exhibited sustained release characteristics in vitro with zero order drug release kinetics up to initial 10 hr. Stability evaluation indicated that both formulations were not significantly leaky over a period of one month. Niosomal formulation elevated plasma elimination half life and decreased elimination rate constants for rifampicin in vivo suggested that encapsulation retarded the removal of the drug from circulation compared to free drug due to slow drug release into systemic circulation. A five-fold increase in the area under plasma rifampicin concentration-time curve for niosomal rifampicin as compared to free drug indicated better bioavailability of encapsulated drug. It is evident from this study that niosomes and liposomes could be promising delivery systems for rifampicin with prolonged drug release profiles and reasonably good stability characteristics.     

Development and Optimisation of Spironolactone Nanoparticles for Enhanced Dissolution Rates and Stability

Stable solid lipid nanoparticles (SLNs) and nanostructured lipid carriers (NLCs) formulations to enhance the dissolution rates of poorly soluble drug spironolactone (SP) were being developed. Probe ultra-sonication method was used to prepare SLNs and NLCs. All NLCs contained stearic acid (solid lipid carrier) and oleic acid (liquid lipid content), whereas, SLNs were prepared and optimised by using the solid lipid only. The particles were characterised in terms of particle size analysis, thermal behaviour, morphology, stability and in vitro release. The zeta sizer data revealed that the increase in the concentration of oleic acid in the formulations reduced the mean particle size and the zeta potential. The increase in concentration of oleic acid from 0 to 30% (w/w) resulted in a higher entrapment efficiency. All nanoparticles were almost spherically shaped with an average particle size of about ～170 nm. The DSC traces revealed that the presence of oleic acid in the NLC formulations resulted in a shift in the melting endotherms to a higher temperature. This could be attributed to a good long-term stability of the nanoparticles. The stability results showed that the particle size remained smaller in NLC compared to that of SLN formulations after 6 months at various temperatures. The dissolution study showed about a 5.1- to 7.2-fold increase in the release of the drug in 2 h compared to the raw drug. Comparing all nanoparticle formulations indicated that the NLC composition with a ratio of 70:30 (solid:liquid lipid) is the most suitable formulation with desired drug dissolution rates, entrapment efficiency and physical stability.     

Ocular amphotericin B delivery by chitosan-modified nanostructured lipid carriers for fungal keratitis-targeted therapy

Abstract

Context: Fungal keratitis, a corneal fungal infection of the eye caused mainly by Candida species, has become the leading cause of blindness resulting from corneal disease in China. Present limitations in the management of ophthalmic fungal infections include the inability to provide long-term extraocular drug delivery without compromising intraocular structures and/or systemic drug exposure.

Objective: The aim of this study was to construct amphotericin B (AmB) loaded, chitosan-modified, nanostructured lipid carriers (AmB-CH-NLC) for prolonged ocular application and for the improvement of the targeted delivery of AmB to the ocular mucosa.

Materials and methods: The AmB-CH-NLC was produced by the method of emulsion evaporation-solidification at low temperature. The particle size, zeta potential, and encapsulation efficiency, drug-release behavior, and corneal penetration ability were performed in vitro and in vivo.

Results and discussion: The prepared AmB-CH-NLC nanoparticles exhibited a measured size of 185.4?nm, a zeta potential of 27.1?mV, and an entrapment efficiency of 90.9%. Sustained drug release behavior was observed in vitro. The in vivo ocular pharmacokinetic study indicated improved bioavailability of AmB-CH-NLC. The corneal penetration study showed that the AmB-CH-NLC could successfully penetrate into the cornea with no obvious irritation to the rabbits’ eyes.

Conclusion: The results support that this novel nanomedicine could be a promising system for effective ocular delivery of amphotericin B for fungal keratitis-targeted therapy.     

Preparation and characterization of galactose-modified liposomes by a nonaqueous enzymatic reaction

In this study, NOH (NOH?=?N-octadecyl-4-[(D-galactopyranosyl)oxy]-2,3,5,6-tetrahydroxy hexanamide) was enzymatically synthesized as a targeting molecule and incorporated into liposomes to prepare a liposome surface modified with galactose. Glycyrrhetinic-acid-loaded liposome (GA-LP) and glycyrrhetinic-acid-loaded liposome surface modified with galactose (NOH-GA-LP) were prepared by the ethanol-injection method. NOH-GA-LP was characterized by morphology, particle size, zeta potential, encapsulation efficiency, release in vitro, and stability. The size of spherical particles was in the range of 179-211?nm. Spherical particles exhibit a positive electrical charge (38.7 mV) and possess high encapsulation efficiency (91.3%) and show sustained release (72% over 48 hours) in vitro. This novel approach for the liposome surface modified with galactose by enzymatic synthesis is expected to provide potential application as a drug carrier for active targeted delivery to hepatocytes.     

Enhancement of oral bioavailability of pentoxifylline by solid lipid nanoparticles

Pentoxifylline (PTX) is a highly water-soluble, hemorheologic drug that undergoes first-pass effect with 20% bioavailability. The solid lipid nanoparticles (SLNs) of PTX were prepared to enhance its oral bioavailability by homogenization, followed by the sonification method. Seven different variables, each at two levels, were studied: lipid type, surfactant type and concentration, speed of homogenizer, acetone:dichloromethane (DCM) ratio, lecithin:lipid ratio, and sonication time. The mean particle size and size distribution, drug entrapment efficiency (EE%), zeta potential, and drug release of the SLNs were investigated. A pharmacokinetic study was conducted in male Wistar rats after oral administration of 10?mg kg^?1 PTX in the form of free drug or SLNs. The z-average particle size, zeta potential, and EE% of the SLNs were at least 250?nm, ?30.2 mV, and 70%, respectively. Among the studied factors, the lipid type, surfactant type, and percentage had a significant effect on the particle size. Zeta potential was more affected by lipid type, acetone:DCM ratio, and sonication time. Speed of homogenizer and acetone:DCM ratio had a significant effect on the EE%. The optimized SLN was prepared by 80?mg of cetyl alcohol, 10?mg of lecithin, acetone:DCM ratio (1:2), 30-second sonication, 3% Tween 20, and a mixing rate of 800?rpm. In vitro drug release lasted for about 5 hours. It was found that the relative bioavailability of PTX in SLNs was significantly increased, compared to that of the PTX solution. SLNs offer a promising approach to improve the oral bioavailability of PTX that is affected by a high first-pass effect.     

Docetaxel-loaded nanostructured lipid carriers functionalized with trastuzumab (Herceptin) for HER2-positive breast cancer cells

Abstract

The aim of the present study was to prepare Herceptin targeted nanostructured lipid carriers (NLCs) of docetaxel (DTX). Herceptin was conjugated by chemical and physical methods to NLCs prepared by solvent extraction technique followed by probe sonication. Different types of fatty amines were used in construction of NLCs. The NLCs were characterized for their antibody coupling efficiency, particle size, zeta potential, polydispersity index, drug entrapment efficiency and drug release profiles. The toxicity of NLCs on MDA-MB-468 (HER2 negative receptor) and BT-474 (HER2 positive) breast cancer cell lines was evaluated by MTT assay. Also their cellular uptake was studied by flow-cytometry and fluorescent microscopy. The results showed the NLCs containing stearyl amine had the lowest particle size, the highest zeta potential and antibody coupling efficiency values. Herceptin binding to NLCs led to reduction in zeta potential and drug entrapment efficiency while, particle size increased. The NLCs containing spermine(SP) released DTX slower than other fatty amines. Non-conjugated nanoparticles containing DTX had more toxicity than the free DTX on both cell lines. Herceptin targeted NLCs caused more mortality on BT-474 cells than MDA-MB-468 cells. Flow-cytometry studies revealed enhanced cellular uptake of nanoparticles chemically conjugated by Herceptin on the BT-474 cells. DTX loaded in chemically conjugated NLCs to Herceptin showed more cytotoxic effects than the physically coated nanoparticles. The Herceptin conjugated NLCs seem promising in oriented delivery of DTX to HER2 positive breast cancer cells.