Over-expression in E. coli and purification of the human OCTN1 transport protein

The hOCTN1 amplified from skin fibroblast RNA was cloned in pET-28a(+) or in pH6EX3 plasmid. The encoded recombinant hOCTN1 resulted in a 6-His tagged fusion protein with a 34 or 21 amino acid extra N-terminal sequence in the pET-28a(+)-hOCTN1 or in the pH6EX3-hOCTN1 constructs, respectively. Both constructs were used to express the hOCTN1 in Escherichia coli Rosetta(DE3)pLysS. The best over-expression was obtained with the pH6EX3-hOCTN1 after 6 h of induction with IPTG at 28 °C. The expressed protein with an apparent molecular mass of 54 kDa, was collected in the insoluble fraction of the cell lysate. Further improvement was obtained using the E. coli RosettaGami2(DE3)pLysS strain to express the protein encoded by pH6EX3-hOCTN1. After 6 h of induction with IPTG at 28 °C, hOCTN1 accounted for 30% of the total protein in the insoluble pellet. This protein fraction was washed with Triton X-100 and deoxycholate, solubilized with a buffer containing 0.8% Sarkosyl, 3 M urea and applied to a Ni²⁺-chelating chromatography column. The homogeneously purified hOCTN1 was eluted with a buffer containing 50 mM imidazole, 0.1% Triton X-100 and 50 mM 2-mercaptoethanol. A yield of about 3 mg purified protein per liter of cell culture was obtained.     

Cloning, Large Scale Over-Expression in E. coli and Purification of the Components of the Human LAT 1 (SLC7A5) Amino Acid Transporter

The high yield expression of the human LAT1 transporter has been obtained for the first time using E. coli. The hLAT1 cDNA was amplified from HEK293 cells and cloned in pH6EX3 vector. The construct pH6EX3-6His-hLAT1 was used to express the 6His-hLAT1 protein in the Rosetta(DE3)pLysS strain of E. coli. The highest level of expression was detected 8 h after induction by IPTG at 28 °C. The expressed protein was collected in the insoluble fraction of cell lysate. On SDS-PAGE the apparent molecular mass of the polypeptide was 40 kDa. After solubilization with sarkosyl and denaturation with urea the protein carrying a 6His N-terminal tag was purified by Ni²⁺-chelating affinity chromatography and identified by anti-His antibody. The yield of the over-expressed protein after purification was 3.5 mg/L (cell culture). The human CD98 cDNA amplified from Imagene plasmid was cloned in pGEX-4T1. The construct pGEX-4T1-hCD98 was used to express the GST-hCD98 protein in the Rosetta(DE3)pLysS strain of E. coli. The highest level of expression was detected in this case 4 h after induction by IPTG at 28 °C. The expressed protein was accumulated in the soluble fraction of cell lysate. The molecular mass was determined on the basis of marker proteins on SDS-PAGE; it was about 110 kDa. GST was cleaved from the protein construct by incubation with thrombin for 12 h and the hCD98 was separated by Sephadex G-200 chromatography (size exclusion). hCD98 showed a 62 kDa apparent molecular mass, as determined on the basis of molecular mass markers using SDS-PAGE. The yield of CD98 was 2 mg/L of cell culture.     

SUMO Mediating Fusion Expression of Antimicrobial Peptide CM4 from two Joined Genes in <Emphasis Type="Italic">Escherichia coli</Emphasis>

Antibacterial peptide CM4 (ABP-CM4) is a small cationic peptide with broad-spectrum activities against bacteria, fungi, and tumor cells, which may possibly be used as an antimicrobial agent. To improve the expression level of CM4 in Escherichia coli, two tandem repeats of CM4 genes were cloned into the vector pSUMO to construct an expression vector pSUMO–2CM4. The fusion protein SUMO–2CM4, purified by Ni²⁺-chelating chromatography, was cleaved by hydroxylamine hydrochloride to release recombinant CM4. After the cleaved sample was re-applied to a Ni-IDA column, finally, about 48 mg recombinant CM4 was obtained from 1 L bacterial culture with no less than 96% purity, which was the highest yield of CM4 reported so far.     

Molecular cloning,sequence analysis,expression and characterization of the endochitinase gene from <Emphasis Type="Italic">Trichoderma</Emphasis> sp. in <Emphasis Type="Italic">Escherichia coli</Emphasis> BL21

The endochitinase DNA and cDNA from Trichoderma sp. were cloned, sequenced and expressed. The cloned DNA and cDNA sequences were 1,476 and 1,275 bp in length, respectively. There were three introns in DNA sequence in comparison with the cDNA sequence. The endochitinase protein contained three regions: the signal peptide, the prepro-region and the mature protein region. The gene fragment encoding the mature endochitinase was ligated into the expression vector pET-28a+, yielding pET-1. The plasmid pET-1 was transformed into the Escherichia coli BL21 (DE3). The clone bearing pET-1 was picked and cultured at 30°C for the expression of endochitinase. SDS-PAGE analysis showed that the endochitinase was expressed in the periplasmic space and the purified protein showed a single band. The activity of 70.2 U/mg was obtained from the cellular extract of the recombinant strain. The activity of endochitinase was 2.5-fold higher at 24 h than at 16 h in the periplasmic space. The optimal pH and temperature of the recombinant endochitinase were determined to be 7.0 and 35°C, respectively. It was relatively stable within the pH range of 5–8. Significant activity stimulation by 1 mM Mg²⁺ and 5 mM Fe²⁺ and inhibition by 5 mM Co²⁺ and 5 mM Hg²⁺ were observed. The kinetic constants K_m, V_max and K_cat for the hydrolysis of the colloidal chitin were 1.5 mM, 1.37 μmol min⁻¹ and 6.23 min⁻¹, respectively.     

Strategies of Bacterial Over Expression of Membrane Transporters Relevant in Human Health: The Successful Case of the Three Members of OCTN Subfamily

The OCTN subfamily includes OCTN1, 2, and 3 which are structurally and functionally related. These transporters are involved in maintenance of the carnitine homeostasis, which is essential in mammals for fatty acid β-oxidation, VLDL assembly, post-translational modifications, and other essential functions. Indeed, defects of these transporters lead to severe pathologies. OCTN1 and OCTN2 are expressed in many human tissues, while OCTN3 gene has been identified only in mouse and rat. The transporters mediate transport of carnitine and other substrates with different efficiencies and mechanisms. In order to over express the three proteins, a screening of many combinations of E. coli strains with plasmid constructs has been conducted. Only Rosetta(DE3) or Rosettagami2(DE3) gave significant expression. Higher protein amounts were firstly obtained with pET-41a(+) or pGEX-4T1 carrying fusion protein tags which required additional purification passages. Vectors carrying only a 6His tag, suitable for single passage purification, were preferred even though they lead to lower initial expression levels. Expressions were then increased optimizing several critical parameters. hOCTN1 was obtained with pH6EX3 in RosettaGami2(DE3)pLysS. hOCTN2 and mOCTN3 were obtained using pET-21a(+) in Rosetta(DE3). In particular, hOCTN2 was expressed only after codon bias, substituting the second triplet CGG with AAA (R2K mutant). The best growth conditions for hOCTN1 and mOCTN3 were 28 °C and 6 h of induction, while 4 h of induction for hOCTN2R2K. The proteins collected in the insoluble fraction of cell lysates, solubilized with sarkosyl, were purified by Ni-chelating chromatography. Final yield was 2.0, 3.0, or 3.5 mg/l of cell culture for mOCTN3, hOCTN1, or hOCTN2R2K. The data indicated that, in spite of the close evolutionary relations, several factors play different critical roles in bacterial expression of the three proteins, thus general criteria cannot be underlined. However, the strategy of dealing with related proteins revealed to be finally successful for over expressing all the three subfamily members.     

Production and purification of a cecropin family antibacterial peptide,hinnavin II,in <Emphasis Type="Italic">Escherichia coli</Emphasis>

The antibacterial peptide hinnavin II, isolated from the cabbage butterfly Artogeia rapae, is synthesized with an amidated lysine 37 residue at C-terminus. Glycine-extended native hinnavin II (hinnavin II-38-Gly, hin II) gene with 114 bp coding region was cloned in the expression vector pET-32a (+) to construct a fusion expression plasmid and transformed into Escherichia coli BL21 (DE3) pLysS. The recombinant fusion protein Trx-hin II was expressed in soluble form, purified successfully by Ni²⁺-chelating chromatography, and cleaved by enterokinase to release recombinant hin II (rhin II). Purification of the rhin II was achieved by reversed-phase FPLC, and 2.45 mg pure active rhin II was obtained from 800 mL E. coli culture. The molecular mass of the rhin II determined by MALDI-TOF mass spectrometry is consistent with the theoretical molecular mass of 4,195.0 Da. The purified rhin II showed antimicrobial activities against tested E. coli K 12, E. coli BL21 (DE3), Enterobacter cloacae, Bacillus megaterium, and Staphylococcus aureus. The application of this expression/purification approach represents a fast and efficient method to prepare milligram quantities of hinnavin II in its biologically active form.     

Over-expression in Escherichia coli, purification and reconstitution in liposomes of the third member of the OCTN sub-family: the mouse carnitine transporter OCTN3

pET-21a(+)-mOCTN3-6His was constructed and used for over-expression in Escherichia coli Rosetta(DE3)pLysS. After IPTG induction a protein with apparent molecular mass of 53 kDa was collected in the insoluble fraction of the cell lysate and purified by Ni(2+)-chelating chromatography with a yield of 2mg/l of cell culture. The over-expressed protein was identified with mOCTN3 by anti-His antibody and reconstitution in liposomes. mOCTN3 required peculiar conditions for optimal expression and reconstitution in liposomes. The protein catalyzed a time dependent [(3)H]carnitine uptake which was stimulated by intraliposomal ATP and nearly independent of the pH. The K(m) for carnitine was 36 μM. [(3)H]carnitine transport was inhibited by carnitine analogues and some Cys and NH(2) reagents. This paper represents the first outcome in over-expressing, in active form, the third member of the OCTN sub-family, mOCTN3, in E. coli.     

Recombinant Production, Isotope Labeling and Purification of ENOD40B: A Plant Peptide Hormone

The plant peptide hormone ENOD40B was produced in a protein production strain of Escherichia coli harboring an induction controller plasmid (Rosetta(DE3)pLysS) as a His6-tagged ubiquitin fusion protein. The fusion protein product was denatured and refolded as part of the isolation procedure and purified by immobilized metal ion chromatography. The peptide hormone was released from its fusion partner by adding yeast ubiquitin hydrolase (YUH) and subsequently purified by reversed phase chromatography. The purity of the resulting peptide fragment was assayed by MALDITOF mass spectrometry and NMR spectroscopy. The final yields of the target peptide were 7.0 mg per liter of LB medium and 3.4 mg per liter of minimal medium.     

Cloning,characterization and expression of the extracellular lipase gene from <Emphasis Type="Italic">Aureobasidium </Emphasis><Emphasis Type="Italic">pullulans</Emphasis> HN2-3 isolated from sea saltern

The extracellular lipase structural gene was isolated from cDNA of Aureobasidium pullulans HN2-3 by using SMART^TM RACE cDNA amplification kit. The gene had an open reading frame of 1245 bp long encoding a lipase. The coding region of the gene was interrupted by only one intron (55 bp). It encodes 414 amino acid residues of a protein with a putative signal peptide of 26 amino acids. The protein sequence deduced from the extracellular lipase structural gene contained the lipase consensus sequence (G-X-S-X-G) and three conserved putative N-glycosylation sites. According to the phylogenetic tree of the lipases, the lipase from A. pullulans was closely related to that from Aspergillus fumigatus (XP_750543) and Neosartorya fischeri (XP_001257768) and the identities were 50% and 52%, respectively. The mature peptide encoding cDNA was subcloned into pET-24a (+) expression vector. The recombinant plasmid was expressed in Escherichia coli BL21(DE3). The expressed fusion protein was analyzed by SDS-PAGE and western blotting and a specific band with molecular mass of about 47 kDa was found. Enzyme activity assay verified the recombinant protein as a lipase. A maximum activity of 0.96 U/mg was obtained from cellular extract of E. coli BL21(DE3) harboring pET-24a(+)LIP1. Optimal pH and temperature of the crude recombinant lipase were 8.0 and 35 °C, respectively and the crude recombinant lipase had the highest hydrolytic activity towards peanut oil.     

Expression of antimicrobial peptide LH multimers in <Emphasis Type="Italic">Escherichia coli</Emphasis> C43(DE3)

The tandem repeats of LFB15(W4,10)-HP(4-16) (LH) gene were cloned into vector pET32a(+) for recombinant expression in Escherichia coli. The E. coli C43(DE3) was successfully used as the expression host to avoid the cell death during induction in E. coli BL21(DE3). Fusion LH dimer was expressed as inclusion body at a portion of 35% of total cell protein and could be well purified by Ni²⁺-chelating chromatography. The recombinant LH was released by the cleavage of 50% formic acid, and its yield reached 11.3 mg/l with purity of 95%. The MIC₅₀ of 3.6 and 1.9 μM of recombinant LH against E. coli CMCC 44102 and Bacillus subtilis ATCC 6633 were determined, respectively. The results demonstrated that expression of tandem LH gene in E. coli C43(DE3) and formic acid cleavage would provide a potent efficient platform for the production of interested peptides. Zi-gang Tian and Tian-tang Dong contributed equally to this paper.     

High-Level Production of a Novel Antimicrobial Peptide Perinerin in <Emphasis Type="Italic">Escherichia coli</Emphasis> by Fusion Expression

Perinerin is a small antimicrobial peptide (AMP) isolated from an Asian marine clamworm, Perinereis aibuhitensis Grube. It shows marked activity in vitro against both Gram-negative and Gram-positive bacteria. To obtain it in large amounts, the coding sequence of perinerin was cloned into pET32a(+) vector and expression as a Trx fusion protein in Escherichia coli. The soluble fusion protein collected from the supernatant of the cell lyste was separated by Ni²⁺-chelating chromatography. The purified protein was then cleaved by Factor Xa protease to release mature perinerin. Final purification was achieved by ion-exchange chromatography. Recombinant perinerin exhibited a similar antimicrobial activity to the native perinerin. These works might provide a significant foundation for the following research on the action of mechanism of marine AMPs.     

Large-scale expression,purification, and glucose uptake activity of recombinant human FGF21 in <Emphasis Type="Italic">Escherichia coli</Emphasis>

As a novel important regulator of glucose and lipid metabolism homeostasis, human fibroblast growth factor 21 (hFGF21) has become a potential drug candidate for the treatment of metabolic diseases including obesity, and type 2 diabetes, as well as non-alcoholic fatty liver disease. To improve the production of recombinant hFGF21 to meet the increasing demand in clinical applications, an artificial gene encoding its mature peptide sequence was constructed, cloned into vector pET-3c and then expressed in Escherichia coli Origami B (DE3). Under optimal conditions in a 50-L fermentor, the average bacterial yield and the soluble expression level of recombinant hFGF21 of six batches attained 1750 ± 185 g and 32 ± 1.5%, respectively. The target protein was purified by the combination of nickel-nitrilotriacetic acid affinity chromatography and Sephadex S-100 resin. 5% (w/v) trehalose solution was able to prevent rhFGF21 from degradation effectively. The purity of rhFGF21 was higher than 97%, and the yield was 213 ± 17 mg/L. The preliminary biochemical characterization of rhFGF21 was confirmed using Western blot and peptide map finger analysis. Based on the glucose oxidase–peroxidase assay, the EC50 of glucose uptake activity of the purified rhFGF21 was 22.1 nM.     

胆汁三烯结合蛋白在大肠杆菌中的表达、复性与纯化

目的：合成胆汁三烯结合蛋白（BBP）基因并在大肠杆菌中表达,获得重组BBP纯化制品。方法：根据天然BBP的基因序列和大肠杆菌偏好密码子设计并合成BBP基因的引物,PCR扩增优化的BBP基因序列,克隆至载体pEasy-T3;测序正确后,将该序列克隆至表达载体pET-32a上,构建表达质粒,转化至大肠杆菌BL21（DE3）pLysS,在IPTG诱导下表达融合蛋白;采用Ni柱纯化融合蛋白。结果：PCR扩增获得了优化后的BBP基因序列,构建了表达载体pET-32a-BBP;SDS-PAGE分析表明表达的融合蛋白相对分子质量为20×10^3,以包涵体形式存在,占全菌蛋白的40%以上;变性、复性后经Ni2＋柱纯化,获得纯度达98%以上的重组蛋白。结论：优化并合成了BBP全基因序列,获得了高纯度重组融合蛋白,为进一步鉴定其生物活性及筛选小分子的研究奠定了基础。     

Enhanced Soluble Expression of a Thermostable Cellulase from <Emphasis Type="Italic">Clostridium thermocellum</Emphasis> in <Emphasis Type="Italic">Escherichia coli</Emphasis>

In this study, the cellulase gene celD from Clostridium thermocellum was cloned into expression vectors pET-20b(+) and pHsh. While high expression can be achieved by means of both these expression systems, only the pHsh expression system gives soluble proteins. By weakening the mRNA secondary structure and replacing the rare codons for the N-terminal amino acids of the target protein, the expression level of CelD was increased from 4.1 ± 0.3 to 6.4 ± 0.4 U ml⁻¹ in LB medium. Recombinant CelD was purified by heat treatment followed by Ni–NTA affinity. The purified CelD exhibited the highest activity at pH 5.4 and 60°C, and retained more than 50% activity after incubation at 70°C for 1 h. The cellulase activity of CelD was significantly enhanced by Ca²⁺ but inhibited by EDTA. The favorable properties of CelD offer the potential for genetic modification of strains for biomass degradation. Presently, one of the major bottlenecks for industrial cellulase users is the high cost of enzyme production. The high level expression of soluble enzymes from the pHsh expression system offers a novel approach for the production of cellulases to be used in various agro-industrial processes such as chemical, food and textile.     

Cloning,expression and characterization of a halotolerant esterase from a marine bacterium <Emphasis Type="Italic">Pelagibacterium halotolerans</Emphasis> B2<Superscript>T</Superscript>

An esterase PE10 (279 aa) from Pelagibacterium halotolerans B2^T was cloned and overexpressed in Escherichia coli Rosetta in a soluble form. The deduced protein was 29.91 kDa and the phylogenetic analysis of the deduced amino acids sequence showed it represented a new family of lipolytic enzymes. The recombinant protein was purified by Ni–NTA affinity chromatography column and the characterization showed its optimal temperature and pH were 45 °C and pH 7.5, respectively. Substrate specificity study showed PE10 preferred short chain p-nitrophenyl esters and exhibited maximum activity toward p-nitrophenyl acetate. In addition, PE10 was a halotolerant esterase as it was still active under 4 M NaCl. Three-dimensional modeling of PE10 suggested that the high negative electrostatic potential on the surface may relevant to its tolerance to high salt environment. With this halotolerance property, PE10 could be a candidate for industrial use.     

Production and purification of a novel antibiotic peptide,adenoregulin, from a recombinant <Emphasis Type="Italic">Escherichia coli</Emphasis>

Adenoregulin is a member of dermaseptin family which are vertebrate antibiotic peptides having lethal effects against a broad spectrum of bacteria, fungi and protozoa. The 99 bp adenoregulin gene was cloned in the expression vector pET32a and transformed into Escherichia coli BL21(DE3). In fed-batch cultivation of BL21(DE3)/pET32a-adr, an exponential feeding strategy was applied to gain 60 g dry cells l^–1. The recombinant fusion protein Trx-ADR was expressed in a soluble form. The fusion protein was isolated by Ni²⁺-chelating chromatography, cleaved with CNBr and purified to homogeneity through reverse phase-HPLC and size exclusion-HPLC. The purified recombinant adenoregulin had antibacterial activity against Escherichia coli K12D31 with apparent Mr of 3.4 kDa, identical to the anticipated value.     

High-Level Expression of the Antimicrobial Peptide Plectasin in Escherichia coli

Plectasin is a defensin-like antimicrobial peptide isolated from a fungus, the saprophytic ascomycete Pseudoplectania nigrella. Plectasin showed marked antibacterial activity in vitro against Gram-positive bacteria, especially Streptococcus pneumoniae, including strains resistant to conventional antibiotics. Plectasin could kill the sensitive strain as efficaciously as vancomycin and penicillin and without cytotoxic effects on mammalian cell viability. In order to establish a bacterium-based plectasin production system, in the present study, the coding sequence of plectasin was optimized, and then cloned into pET32a (+) vector and expressed as a thioredoxin (Trx) fusion protein in Escherichia coli. The soluble fusion protein collected from the supernatant of the cell lysate was separated by Ni²⁺-chelating affinity chromatography. The purified protein was then cleaved by Factor Xa protease to release mature plectasin. Final purification was achieved by Ni²⁺-chelating chromatography again. The recombinant plectasin exhibited the same antimicrobial activity as reported previously. This is the first study to describe the expression of plectasin in E. coli expression system, and these works might provide a significant foundation for the following production or study of plectasin, and contribute to the development and evolution of novel antimicrobial drugs in clinical applications.     

Biologically active and C-amidated hinnavinII-38-Asn produced from a Trx fusion construct in <Emphasis Type="Italic">Escherichia coli</Emphasis>

The cabbage butterfly (Artogeia rapae) antimicrobial peptide hinnavinII as a member of cecropin family is synthesized as 37 residues in size with an amidated lysine at C-terminus and shows the humoral immune response to a bacterial invasion. In this work, a synthetic gene for hinnavinII-38-Asn (HIN) with an additional amino acid asparagine residue containing amide group at C-terminus was cloned into pET-32a(+) vector to allow expression of HIN as a Trx fusion protein in Escherichia coli strain BL21 (DE3) pLysS. The resulting expression level of the fusion protein Trx-HIN could reach 15–20% of the total cell proteins and more than 70% of the target proteins were in soluble form. The fusion protein could be purified successfully by HiTrap Chelating HP column and a high yield of 15 mg purified fusion protein was obtained from 80 ml E. coli culture. Recombinant HIN was readily obtained by enterokinase cleavage of the fusion protein followed by FPLC chromatography, and 3.18 mg pure active recombinant HIN was obtained from 80 ml culture. The molecular mass of recombinant HIN determined by MALDI-TOF mass spectrometer is 4252.084 Da which matches the theoretical mass (4252.0 Da) of HIN. Comparing the antimicrobial activities of the recombinant hinnavinII with C-amidated terminus to that without an amidated C-terminus, we found that the amide of asparagine at C-terminus of hinnavinII improved its potency on certain microorganism such as E. coli, Enterobacter cloacae, Bacillus megaterium, and Staphylococcus aureus.