TWIST1在人脐静脉内皮细胞增殖、迁移及血管形成中的作用

探讨TWIST1在原代人脐静脉内皮细胞（human umbilical vein endothelial cells,HUVECs）增殖、迁移及体外血管生成中的作用。用有靶向人TWIST1基因shRNA（pLL3.7-shTwist1-GFP）的慢病毒液感染试验组细胞,同时以携带Scramble shRNA的慢病毒液（pLL3.7-shCtrl-GFP）感染对照组细胞,用流式细胞术测定细胞感染效率,实时荧光定量PCR（real-time fluorescent quantitative PCR,qRT-PCR）检测shRNA的基因沉默效率。通过制作细胞生长曲线、Annexin V/7AAD染色流式细胞术、细胞划痕实验、小管形成实验、qRT-PCR检测TWIST1表达降低对HUVECs的增殖、凋亡、迁移、血管形成能力以及血管生长因子受体2（vascular endothelial growth factor receptor 2,VEGFR2）基因表达的影响。试验组TWIST1基因表达下降为对照组的30%,表明shTWIST1能有效降低TWIST1基因的表达。与对照组相比,敲降TWIST1能明显抑制HUVECs的增殖（P<0.01）,诱导细胞凋亡（P<0.05）。试验组HUVECs划痕愈合率、体外生成的血管样结构数目和总小管分支长度均显著低于对照组（P<0.01）;与对照组相比,试验组HUVECs中VEGFR2的表达显著降低（P<0.01）。通过探究HUVECs表达的TWIST1在内皮细胞增殖、存活、迁移和毛细血管样结构的形成中的作用,为TWIST1作为抑制肿瘤血管新生治疗的新靶点提供一定的理论依据。     

17β—雌二醇下调血管平滑肌内皮素A型受体的表达

为进一步探讨雌激素对心血管的保护作用,实验在双侧卵巢去势大鼠模型和培养的血管平滑肌细胞（VSMCs)上,观察17β－雌二醇（E2）对血管反应性及VSMCs增殖的影响,以RT－PCR和Western blot检测内皮素受体（ETAR）的表达,结果显示：去势雌性大鼠血管对内皮素（ET－1）的反应性明显增高,ETAR特异性受体阻断剂BQ123能完全阻断ET－1对VSMCs增殖的影响,E2能明显抑制ET－1对VSMCs增殖的作用,RT－PCR结果显示E2能抑制ETAR mRNA的表达,Western blot进一步证实E2能抑制ETAR蛋白表达,E2受体阻断剂Tamoxifen能部分抑制ET－1对VSMCs的增殖及ETAR的mRNA和蛋白 的表达。以上结果提示;ET－1促VSMCs增殖的效应主要是由ETAR介导的,雌激素能通过下调ETAR来抑制ET－1对VSMCs 促增殖的作用和血管对ET－1的反应,且此作用与雌激素受体有关。     

模拟微重力导致人脐静脉内皮细胞微管骨架重构及增殖的影响

目的：观察模拟微重力（MMG）致人脐静脉内皮细胞（HUVECs）微管骨架结构的改变,并对MMG作用后细胞的增殖等功能进行评价。方法：酶消化法原代培养HUVECs,随机分为2D．clinostat干预的MMG培养组与NG对照培养组,均培养48h;倒置显微镜下观察细胞形态,细胞计数及流式细胞术分析细胞增殖、凋亡及细胞周期变化。结果：所培养的HUVECs细胞并经流式细胞术鉴定证实;MMG干预48h使大量的微管蛋白发生解聚,微管的网状结构已经模糊不见,随之代替的是崩解的微管小聚体;MMG可使HUvECs增殖明显抑制,细胞周期抑制于G2／M期（G2／M：MMG,27．6％;NG,18．1％;P〈0．05）,然而细胞并没有发生明显凋亡。结论：MMG可显著影响HUVECs的形态与细胞骨架结构并抑制其增殖功能,HUVECs的增殖抑制可能与紊乱的微管结构密切相关。     

过表达CREG抑制高糖诱导的人脐静脉内皮细胞凋亡

目的：探讨E1A激活基因阻遏子（Cellular repressor of ElA-stimulated genes,CREG）在高糖引起的人脐静脉内皮细胞（Human Umbilical Vein Endothelial Cells,HUVECs）损伤中的作用,为寻找糖尿病血管病变新的治疗靶点提供实验依据。方法：采用胶原酶消化法分离原代HUVECs,并用内皮细胞标志物CD31免疫荧光染色进行鉴定。分别用含有5．5mmol／1葡萄糖（正常糖对照组）、5．5mmol／1葡萄糖＋27．5mmol／1甘露醇（渗透压对照组）或33mmol／l葡萄糖（高糖组）的培养液培养HUVECs48h。WesternBlot检测剪切体caspase-3表达;AnnexinV／PI双染后流式细胞术检测细胞凋亡。通过感染表达CREG基因的腺病毒获得CREG过表达的HUvECs,WesternBlot及流式细胞术评价CREG过表达对HUVECs凋亡的影响。结果：高糖处理48h后,HUVECs内剪切体caspase-3的蛋白表达增加,细胞凋亡率增加;过表达CREG后,高糖处理的HUVECs内剪切体Caspase-3表达和凋亡细胞比例均明显降低,但仍高于正常糖对照组。结论：CREG过表达可抑制高糖引起的HUVECs凋亡。     

重组嗜水气单胞菌Aeromonas hydrophila 4AK4中3-羟基丁酸3-羟基己酸共聚酯PHBHHx的发酵生产

3-羟基丁酸和3-羟基己酸共聚酯（PHBHHx）是一种性能优良的新型生物可降解材料,其机械和加工性能与3-羟基己酸（3HHx）在共聚物中的含量密切相关。在嗜水气单孢菌Aeromonas hydrophila 4AK4中引入了编码β酮基硫解酶 (β-ketothiolase)的phbA基因和编码乙酰乙酰辅酶A还原酶(AcetoacetylCoA reductase)的phbB基因,使重组菌增加了一条利用乙酰辅酶A合成3羟基丁酸-CoA的代谢途径,这使得利用非相关性碳源调控PHBHHx的单体组成比例成为可能。利用葡萄糖酸钠和月桂酸作为碳源,对重组Aeromonas hydrophila 4AK4进行了摇瓶培养及5 L发酵罐培养的研究。在摇瓶实验中,通过改变碳源中两种组分的比例,可以使A. hydrophila 4AK4合成的PHBHHx中的3HHx摩尔含量由原来的15%左右降低到3%～12 %,成功地实现了对PHBHHx单体组成的调控;当以月桂酸为唯一碳源时,在5 L发酵罐中,经过56 h的培养,获得了51.5 g/L的细胞干重（CDW）,其中62 %为PHBHHx,3HHx在PHBHHx中的摩尔含量为9.7 %;当以1:1的葡萄糖酸钠和月桂酸为碳源时,48 h的5 L发酵罐培养获得了32.8 g/L的CDW和52 %的PHBHHx含量,其中3HHx在PHBHHx中的摩尔含量为6.7 %。结果证明了该重组菌在大规模生产单体组成可控PHBHHx方面具有很大的应用潜力。     

17β—雌二醇抑制内皮素诱导的血管平滑肌细胞增殖作用

目的和方法：利用组织块贴壁法进行大鼠VSMC培养,胰蛋白酶分散细胞法传代。实验采用第4-6代细胞。采用氚-胸腺嘧啶核苷（[^3H]-TdR)掺入和细胞计数来作为VSMC增殖的指标,以RT-PCR的方法检测ETAR的表达,观察17β-雌二醇（E2）对内皮素-I（endothelin-l,ET-1)介导的血管平滑肌细胞（VSMC）增殖反应以及对内皮素A型受体（ETAR）表达的影响。结果：ETAR特异性拮抗剂BQ123能完全阻断ET-1介导的VSMC增殖反应;E2可明显抑制ET-1促进VSMC增殖的作用,RT-PCR结果显示E2能抑制ETAR的表达,12h时抑制作用最为明显;E2受体阻断剂Tamoxifen亦能部分抑制ET-1对VSMC的增殖及ETAR的mRNA的表达。结论：ET-1促进VSMC增殖作用主要通过ETAR介导的,雌激素可通过抑制ETARmRNA表达来发挥对ET-1促进VSMC增殖的抑制作用。     

白芨萜类化合物对人脐静脉内皮细胞凋亡和细胞骨架的作用

利用白芨萜类化合物处理人脐静脉内皮细胞（HUVECs）并进一步研究了细胞凋亡及细胞骨架.白芨萜类化合物可拮抗血管内皮细胞生长因子（VEGF）和碱性成纤维细胞生物因子（bFGF）刺激的HUVECs增殖并诱导细胞凋亡.在处理的HUVECs中caspase-8活性明显增加.流式细胞术分析显示经处理的HUVECs的凋亡率随处理时间延长而升高.通过对微管进行免疫荧光染色和微丝进行荧光染色后,用激光共焦扫描显微观察表明,白芨萜类化合物处理的HUVECs中的微管和微丝发生改变甚至被破坏.因此,白芨萜类化合物造成HUVECs凋亡很可能是通过促使微管解体以及微丝去组装造成的.     

Caveolin-1蛋白在171β-雌二醇抑制内皮素-1诱导血管平滑肌细胞增殖中的作用

本工作旨在研究Caveolin-1在17β-雌二醇（17β-estradiol,E2)抑制内皮素-1（endothelin-1,ET-1)诱导血管平滑肌细胞（vascular smooth muscle cells,VSMCs前后ET-1对DNA合成和caveolin-1蛋白表达的影响。结果显示,ET-1可以刺激VSMCs增殖。E2作用24h后,可明显抑制ET-1的上述作用。免疫荧光证实,在VSMCs上有cavellin-1分布,ET-1刺激VSMCs增殖的过程中,VSMCs上caveolin-1蛋白荧光强度下,而事称给予E2可逆转这种下降。Western bolt证实,ET-1可抑制caveolin-1蛋白的表达而E2则可增加caveolin-1蛋白的表达。以上结果表明E2抑制ET-1诱导的VSMCs增殖可能与其增加caveolin-1蛋白表达有关。     

细胞外基质与细胞周期调控

细胞外基质（ECM）主要包括胶原蛋白,蛋白多糖,糖蛋白和弹性蛋白等,细胞经整合素介导与ECM粘附,则ECM各成分对细胞的增殖周期产生影响ECM主要通过调节细胞形状和细胞骨架结构张力,p53-p21^waf1,pRb/E2F,FAK,SPARC,JAK/STAT等胞内信号途径调节细胞周期进程。     

PHBHHx膜表面亲水改性及其与神经干细胞生物相容性

对羟基丁酸-羟基己酸共聚酯(PHBHHx)膜进行表面改性,研究神经干细胞(NSCs)在改性后的PHBHHx膜表面的贴附、增殖及分化情况,为开发新型脑组织工程支架材料奠定基础。采用溶剂挥发法制备PHBHHx膜,扫描电镜观察其表面性状;分别通过脂肪酶处理,NaOH处理的方法对PHBHHx膜进行表面改性,测量接触角以检测膜表面亲水性。分离培养孕14.5 d大鼠胚胎大脑皮质NSCs,接种在表面改性后的PHBHHx膜表面进行体外培养,扫描电镜观察膜表面细胞形态,MTT法检测细胞活力,免疫细胞化学染色观察NSCs存活和分化情况。结果显示,与未处理的PHBHHx膜相比,脂肪酶、NaOH处理能够显著提高PHBHHx膜表面亲水性,增加NSCs在PHBHHx膜表面贴附数量;NSCs在改性后的PHBHHx膜表面能够良好地存活并分化为神经元和胶质细胞。结果提示PHBHHx膜表面碱处理通过提高材料表面亲水性和粗糙程度,增加其与NSCs的生物相容性,改性后的PHBHHx材料是一种非常有潜力的新型脑组织工程支架材料,有望在NSCs移植修复脑损伤中发挥作用。     

Gelatin blending improves the performance of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) films for biomedical application

To improve the performance of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx), gelatin was blended with PHBHHx at different ratios. With increasing gelatin content, the weight loss of gelatin/PHBHHx blend in simulated body fluid at 37 degrees C was accelerated. After 2 months, there was about 15% weight loss in PHBHHx blending with 30% gelatin. Scanning electron microscopy and X-ray diffraction results showed that gelatin blending increased the surface porosity and decreased the crystallinity, which may be responsible for the acceleration of the weight loss. Second harmonic generation results indicated that 10% gelatin blending had less disruption to PHBHHx spatial structure, resulting in better tensile mechanical properties. At the same time, increased surface porosity and decreased crystallinity caused by gelatin incorporation may be beneficial for cell growth compared with pure PHBHHx. All these indicated that gelatin incorporation may improve the performances of PHBHHx to meet the need of different situations during medical implantation.     

重组嗜水气单胞菌Aeromonas hydrophila 4AK4中3-羟基丁酸3-羟基己酸共聚酯PHBHHx的发酵生产

3-羟基丁酸和3-羟基己酸共聚酯(PHBHHx)是一种性能优良的新型生物可降解材料,其机械和加工性能与3-羟基己酸(3HHx)在共聚物中的含量密切相关。在嗜水气单孢菌Aeromonas hydrophila 4AK4中引入了编码β-酮基硫解酶(β-ketothiolase)的phbA基因和编码乙酰乙酰辅酶A还原酶(Acetoacetyl-CoA reductase)的phbB基因,使重组菌增加了一条利用乙酰辅酶A合成3-羟基丁酸-CoA的代谢途径,这使得利用非相关性碳源调控PHBHHx的单体组成比例成为可能。利用葡萄糖酸钠和月桂酸作为碳源,对重组Aeromonas hydrophila 4AK4进行了摇瓶培养及5L发酵罐培养的研究。在摇瓶实验中,通过改变碳源中两种组分的比例,可以使A,hydrophila 4AK4合成的PHBHHx中的3HHx摩尔含量由原来的15％左右降低到3％～12％,成功地实现了对PHBHHx单体组成的调控;当以月桂酸为唯一碳源时,在5L发酵罐中,经过56h的培养,获得了51．5g／L的细胞干重(CDW),其中62％为PHBHHx,3HHx在PHBHHx中的摩尔含量为9．7％;当以1：1的葡萄糖酸钠和月桂酸为碳源时,48h的5L发酵罐培养获得了32．8g／L的CDW和52％的PHBHHx含量,其中3HHx在PHBHHx中的摩尔含量为6．7％。结果证明了该重组菌在大规模生产单体组成可控PHBHHx方面具有很大的应用潜力。     

Engineered Aeromonas hydrophila for enhanced production of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) with alterable monomers composition

Aeromonas hydrophila 4AK4 produces poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) containing 3-hydroxybutyrate (3HB) and about 15 mol% 3-hydroxyhexanoate (3HHx) from dodecanoate. To study the factors affecting the monomer composition and PHBHHx content, genes encoding phasin (phaP), PHA synthase (phaC) and (R)-specific enoyl-CoA hydratase (phaJ) from Aeromonas punctata (formerly named Aeromonas caviae) were introduced individually or jointly into A. hydrophila 4AK4. The phaC gene increased 3HHx fraction more significantly than phaP, while phaJ had little effect. Expression of phaC alone increased the 3HHx fraction from 14 to 22 mol%. When phaC was co-expressed with phaP and phaJ, the 3HHx fraction increased from 14 to 34 mol%. Expression of phaP or phaC alone or with another gene enhanced PHBHHx content up to 64%, cell dry weight (CDW) as much as 4.4 gL(-1) and PHBHHx concentration to 2.7 gL(-1) after 48 h in shake flask culture. The results suggest that a higher PHA synthase activity could lead to a higher 3HHx fraction and PHBHHx content. Co-expression of phaJ with phaC or phaP would favor PHA accumulation, although over-expression of phaJ did not affect PHA synthesis much. In addition, inhibition of beta-oxidation by acrylate in A. hydrophila 4AK4 enhanced PHBHHx content. However, no monomers longer than 3HHx were detected. The results show that genetic modification of A. hydrophila 4AK4 enhanced PHBHHx production and altered monomer composition of the polymer.     

Poly(3-hydroxybutyrate) and poly(3-hydroxybutyrate)-based biopolymer systems

Biodegradable biopolymers attract much attention in biology and medicine due to its wide application. The present review considers a biodegradable and biocompatible polymer of bacterial origin, poly(3-hydroxybutyrate), which has wide perspectives in medicine and pharmaceutics. It highlights basic properties of biopolymer (biodegradability and biocompatibility) and also biopolymer systems: various materials, devices and compositions based on the biopolymer. Application of poly(3-hydroxybutyrate)-based biopolymer systems in medicine as surgical implants, in bioengineering as cell culture scaffolds, and in pharmacy as novel drug dosage forms and drug systems are also considered.     

Synthesis, characterization, and morphology studies of biodegradable amphiphilic poly[(R)-3-hydroxybutyrate]-alt-poly(ethylene glycol) multiblock copolymers

Novel biodegradable amphiphilic alternating block copolymers based on poly[(R)-3-hydroxybutyrate] (PHB) as biodegradable and hydrophobic block and poly(ethylene glycol) (PEG) as hydrophilic block (PHB-alt-PEG) were successfully synthesized through coupling reaction. Their chemical structures have been characterized by using gel permeation chromatography, (1)H nuclear magnetic resonance, and Fourier transform infrared spectroscopy. Differential scanning calorimetry (DSC) analysis revealed that both PHB and PEG blocks in PHB-alt-PEG block copolymers can crystallize to form separate crystalline phase except in those with a short PEG block (M(n) 600) only PHB crystalline phase has been observed. However, due to the mutual interference from each other, the melting transition of both PHB and PEG crystalline phases shifted to lower temperature with lower crystallinity in comparison with corresponding pure PHB and PEG. The crystallization behavior of PHB block and PEG block has also been studied by X-ray diffraction, and the results were in good agreement with those deduced from DSC study. The surface morphologies of PHB-alt-PEG block copolymer thin films spin-coated on mica have been visualized by atomic force microscopy with tapping mode, indicating formation of laterally regular lamellar surface patterns. Static water contact angle measurement revealed that surface hydrophilicity of these spin-coated thin films increases with increasing PEG block content.     

Development of an enzyme linked immunosorbent assay for detection of cyathane diterpenoids

Background

Protein Kinases are key regulators of cell function and play essential roles in the occurrence and development of many human diseases. Many kinase inhibitors have been used for molecular targeted treatment of those diseases such as cancer and inflammation. However, those highly hydrophobic kinase inhibitors shared the common features of poor bioavailability and limited in vivo half-life, which strongly impeded their practical applications. Our previous study demonstrated that microbial synthesized biodegradable polyester poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx), a member of polyhydroxyalkanoates (PHAs) family, could serve as a promising delivery nanocarrier for those hydrophobic kinase inhibitors. Recently, a novel natural synthesized hybrid copolymer, PEG200 end-capped PHBHHx (PHBHHxPEG) was produced by Aeromonas hydrophila fermentation. In this study, the novel PHBHHxPEG NPs were prepared and investigated to serve as intracellular delivery nanocarriers for sustained release of hydrophobic kinase inhibitors.

Results

PHBHHxPEG nanoparticles (NPs) prepared by an emulsification–solvent evaporation method were spherical with a diameter around 200 nm. The entrapment efficiency on rapamycin in PHBHHxPEG NPs was 91.9% and the sustained release of rapamycin from PHBHHxPEG NPs could be achieved for almost 10 days. The cellular uptake of PHBHHxPEG NPs was significant higher than that of PHBHHx NPs. The anti-proliferation effect and mTOR inhibition ability of rapamycin-loaded PHBHHxPEG NPs was stronger than that of drug-loaded PHBHHx NPs and free rapamycin.

Conclusions

PHBHHxPEG NPs could achieve the efficient entrapment and sustained release of rapamycin. The novel biodegradable PHBHHxPEG appeared a promising nanocarrier for sustained delivery of hydrophobic kinase inhibitors with improved cellular uptake and kinase inhibition efficiency.     

Preparation and characterization of biodegradable poly-3-hydroxybutyrate-starch blend films

Bacterial polyesters have attracted much attention as biodegradable biocompatible polymers. Poly-3-hydroxybutyrate, a microbially produced thermoplastic, has similar material properties to polypropylene. Its potential application as biodegradable and biocompatible plastics is well documented. However, due to high cost it is used mainly in biomaterials for medical applications. Materials with useful properties may result from blending bacterial polyhydroxybutyrate (PHB) with other polymers. In this paper, the compatibility of PHB with starch for improved properties and cost reduction is discussed. The thermal and mechanical properties of the blended films were studied by means of thermogravimetry, differential scanning calorimetry and an automated material testing system. The results revealed that blend films had a single glass transition temperature for all the proportions of PHB:starch tested. The nature of all combinations was found to be crystalline. The tensile strength was optimum for the PHB:starch ratio of 0.7:0.3 (wt/wt). The variation in tensile strength, Young's modulus, extension needed to break, thermal stability, glass transition temperature, melting temperature, for the different proportions of PHB:starch are discussed.     

THROMBIN IMMOBILIZATION TO METHACRYLIC ACID GRAFTED POLY(3-HYDROXYBUTYRATE) AND ITS IN VITRO APPLICATION

Poly(3-hydroxybutyrate) is nontoxic and biodegradable, with good biocompatibility and potential support for long-term implants. For this reason, it is a good support for enzyme immobilization. Enzyme immobilization could not be done directly because poly(3-hydroxybutyrate) has no functional groups. Therefore, modification should be done for enzyme immobilization. In this study, methacrylic acid was graft polymerized to poly(3-hydroxybutyrate) and thrombin was immobilized to polymethacrylic acid grafted poly(3-hydroxybutyrate). In fact, graft polymerization of methacrylic acid to poly(3-hydroxybutyrate) and thrombin immobilization was a model study. Biomolecule immobilized poly(3-hydroxybutyrate) could be used as an implant. Thrombin was selected as a biomolecule for this model study and it was immobilized to methacrylic acid grafted poly(3-hydroxybutyrate). Then the developed product was used to stop bleeding.     

Production of poly(3-hydroxybutyrate-<Emphasis Type="Italic">co</Emphasis>-3-hydroxyhexanoate) with flexible 3-hydroxyhexanoate content in<Emphasis Type="Italic"> Aeromonas hydrophila</Emphasis> CGMCC 0911

Aeromonas hydrophila CGMCC 0911 isolated from lake water was found to be able to synthesize a polyhydroxyalkanoate (PHA) copolymer (PHBHHx) consisting of 3-hydroxybutyrate (HB) and 4–6 mol% 3-hydroxyhexanoate (HHx). The wild-type bacterium accumulated 49% PHBHHx containing 6 mol% HHx in terms of cell dry weight (CDW) when grown on lauric acid for 48 h. When A. hydrophila CGMCC 0911 expressed the Acyl-CoA dehydrogenase gene (yafH) of Escherichia coli, the recombinant strain could accumulate 47% PHBHHx, while the HHx content reached 17.4 mol%. The presence of changing glucose concentration in the culture changed the HHx content both in wild type and recombinant A. hydrophila CGMCC 0911. When 5 g l^–1 glucose was added to a culture containing 5 g l^–1 lauric acid as co-substrate, 45% PHBHHx/CDW consisting of 8.8 mol% HHx was produced by wild-type A. hydrophila CGMCC 0911 compared with only 5% in the absence of glucose. When the recombinant A. hydrophila CGMCC 0911 was grown on a mixed substrate containing lauric acid and 8–10 g l^–1 glucose, the HHx content could be further increased to 35.6 mol%. When the glucose concentration exceeded 10 g l^–1, cell growth, PHA content and mole percentages of HHx in PHBHHx were significantly reduced.     

The accumulation of poly(3-hydroxyalkanoates) in Rhodobacter sphaeroides

In recent years industrial interest has been focussed on the evaluation of poly(3-hydroxyalkanoates) (PHA) as potentially biodegradable plastics for a wide range of technical applications. Studies have been carried out in order to optimize growth and culture conditions for the intracellular formation of PHA in the phototrophic, purple, non-sulfur bacterium Rhodobacter sphaeroides. Its potential to produce polyesters other than poly(3-hydroxybutyrate) (PHB) was investigated. On an industrial scale, the use of photosynthetic bacteria could harness sunlight as an energy source for the production of these materials. R. sphaeroides was grown anaerobically in the light on different carbon sources. Under nitrogenlimiting conditions a PHA content of up to 60 to 70% of the cellular dry weight was detected. In all of the cases studied, the storage polymer contained approximately 98 mol% of 3-hydroxybutyrate (HB) and 2 mol% 3-hydroxyvalerate (HV) monomer units. Decreasing light intensities did not stimulate PHA formation. Compared to Rhodospirillum rubrum (another member of the family of Rhodospirillaceae), R. sphaeroides showed a limited flexibility in its ability to form PHA with varying monomer unit compositions.