超声引导下隐神经联合IPACK阻滞对老年全膝关节置换术患者应激反应、炎性细胞因子及膝关节活动度的影响

摘要 目的：探讨超声引导下隐神经联合腘动脉与膝关节后囊间隙（IPACK）阻滞对老年全膝关节置换术（TKA）患者应激反应、炎性细胞因子及膝关节活动度的影响。方法：根据随机数字表法,将无锡市中医医院2021年3月~2022年9月期间收治的102例初次行TKA的老年患者分为观察组（超声引导下隐神经联合IPACK阻滞镇痛处理）和对照组（超声引导下隐神经镇痛处理）,每组各51例。对比两组疼痛情况、炎性细胞因子、应激反应指标、不良反应发生率、膝关节活动度。结果：观察组术后6 h、术后12 h、术后24 h视觉模拟评分法（VAS）评分低于对照组（P<0.05）。观察组术后48 h肿瘤坏死因子-α（TNF-α）、白细胞介素（IL）-6、IL-1β、β-淀粉样蛋白（Aβ）低于对照组（P<0.05）。观察组术后48 h血管紧张素Ⅱ（AngⅡ）、皮质醇（COR）低于对照组（P<0.05）。观察组术后24 h、术后48 h膝关节活动度大于对照组（P<0.05）。两组不良反应发生率对比无差异（P>0.05）。结论：超声引导下隐神经联合IPACK阻滞用于TKA患者,具有较好的镇痛效果,可减轻应激反应,抑制炎性细胞因子过度分泌,改善膝关节活动度,麻醉效果较好。     

Axial loading induces rotation of the proximal carpal row bones around unique screw-displacement axes

The changes in carpal bone alignment secondary to the aplication of an axial compressive load through the major wrist motor tendons while the wrist is kept in neutral position (isometric loading) have been investigated on 13 fresh cadaver specimens using a biplanar radiographic method of kinematic analysis. The scaphoid, lunate and triquetrum rotate an average of 5.1, 4.2 and 3.8°, respectively, around different ‘screw displacement axes’, all implying flexion, radial deviation and supination. Based on these findings, a new interpretation of the mechanism by which the wrist remains stable under physiologic loads is provided.     

七氟烷复合麻醉对老年骨科患者术后早期认知功能的影响

摘要 目的：探讨七氟烷复合麻醉对老年骨科患者术后早期认知功能的影响。方法：选择2017年12月~2019年6月在西安医学院第二附属医院（本院）骨科诊治单侧老年全膝关节置换手术患者112例,随机数字表法分为七氟烷组与对照组,各56例。对照组给予常规静脉注射全身麻醉,在此基础上七氟烷组给予七氟烷吸入麻醉,记录与调查两组术后早期认知功能。结果：经过对比,两组手术时间、术中出血量对比差异无统计学意义(P>0.05),而七氟烷组的术后苏醒时间(7.10±0.22)min、拔管时间(8.65±0.46)min等都显著短于对照组(14.09±1.09)min、(18.76±1.44)min,两组对比有统计学意义(P<0.05)。所有患者在T1、T2、T3与T4时间点的心率和血氧饱和度均表现正常,对比均无统计学意义(P>0.05)。七氟烷组术后1 d、术后14 d的血清白介素(Interleukin,IL)-6、肿瘤坏死因子(Tumor necrosis factor,TNF)-α值显著低于对照组,对比有统计学意义(P<0.05),且两组术后14 d的血清IL-6与TNF-α值均显著低于术后1 d (P<0.05)。术后1个月七氟烷组的认知功能障碍发生率为1.8 %（1/56）,显著低于对照组的12.5 %（7/56）,两组间对比有统计学意义(x²=4.846,P=0.028)。结论：七氟烷复合麻醉在老年骨科患者中的应用能促进患者康复,安全性比较好,能抑制炎症因子的释放,从而减少术后早期认知功能障碍的发生。     

右归丸对大鼠膝骨关节炎的干预作用及其机制*

目的: 探讨右归丸对膝骨关节炎(KOA)模型鼠关节软骨组织骨诱导因子(OGN)、骨黏连蛋白(ON)和纤维蛋白原2(FBN2)的影响。方法: 将大鼠随机分为假手术组,模型组,硫酸氨基葡萄糖组(硫酸氨基葡萄糖),右归丸(高、中、低剂量)组,每组10只。采用改良Hulth法制备大鼠KOA模型,假手术组和模型组给予等体积生理盐水灌胃,右归丸高、中、低剂量组分别灌胃给予右归丸4.8,2.4,1.2 g/kg,硫酸氨基葡萄糖组灌胃给予硫酸氨基葡萄糖 0.17 g/kg,连续给药8周。干预结束24 h后取鼠膝关节软骨,采用HE染色法观察各组软骨的病理改变,并进行Mankin评分;免疫组化法检测各组关节软骨组织中OGN、ON和FBN2的表达;Western blot法检测各组关节软骨组中糖原合成酶激酶-3β(GSK-3β)的表达。结果: 与假手术组比较,模型组大鼠软骨组织Makin 评分显著升高,软骨组织FBN2蛋白表达水平上显著增加,OGN、ON和GSK-3β蛋白表达水平上的显著降低(P＜0.01);模型组关节软骨边缘严重破坏,软骨细胞排列紊乱。与模型组比较,右归丸高剂量干预组大鼠软骨组织Makin 评分和FBN2蛋白表达水平显著降低,GSK-3β蛋白表达水平上显著增加,且右归丸中、高剂量组OGN、ON蛋白表达水平均显著增加(P＜0.05或P＜0.01),软骨结构趋于正常,软骨细胞分布仅偶见不均,关节软骨表面欠光滑。结论: 右归丸能够延缓关节软骨退变,其可能机制是通过提高骨诱导因子和骨粘连蛋白的表达水平来促进关节软骨的骨化和重构。     

Effects of branched-chain amino acid supplement on knee peak torque and indicators of muscle damage following isokinetic exercise-induced delayed onset muscle soreness

[Purpose] This study aimed to investigate the effects of branched-chain amino acid (BCAA) supplement on delayed onset muscle soreness (DOMS) by analyzing the maximum muscle strength and indicators of muscle damage.[Methods] Twelve men with majors in physical education were assigned to the BCAA group and placebo group in a double-blinded design, and repeated measurements were conducted. DOMS was induced with an isokinetic exercise. Following BCAA administration, the changes in the knee extension peak torque, flexion peak torque, aspartate aminotransferase (AST), creatine kinase (CK), and lactate dehydrogenase (LDH) concentrations were analyzed. The maximum knee muscle strength was measured at the baseline (pre-D0) following BCAA administration for 5 days before exercise (-D5, -4D, -3D, -2D, -1D). In contrast, the post-treatment measurements (D3) were recorded after BCAA administration for 3 days (post-D0, D1, D2). Blood samples were obtained before (pre-D0), immediately after (post-D0), 24 h (D1), 48 h (D2), and 72 h (D3) after the exercise to analyze the indicators of muscle strength. BCAA was administered twice daily for 8 days (5 days and 3 days before inducing DOMS and during the experimental period, respectively).[Results] There was no difference in the flexion peak torque between the groups. However, the BCAA group showed a significantly higher extension peak torque at D3 (second isokinetic exercise), compared to the placebo group (p<.05). There was no difference in AST changes between the groups. Nonetheless, the CK and LDH were significantly reduced in the BCAA group, compared to the placebo group. There was no correlation between the extension peak torque and flexion peak torque. However, the CK and LDH increased proportionately in DOMS. Moreover, their concentrations significantly increased with a decreasing peak torque (p<.01).[Conclusion] An exercise-induced DOMS results in a decrease in the peak torque and a proportional increase in the CK and LDH concentrations. Moreover, the administration of BCAA inhibits the reduction of the extension peak torque and elevation of CK and LDH concentrations. Therefore, BCAA might be administered as a supplement to maintain the muscle strength and prevent muscle damage during vigorous exercises that may induce DOMS in sports settings.     

不同麻醉方式对老年糖尿病患者全膝置换术后糖代谢的影响

目的:探讨不同麻醉方式对老年糖尿病患者全膝置换术(total knee arthoplasty,TKA)后糖代谢的影响。方法:2018年2月到2020年3月选择在本院进行择期TKA的老年糖尿病合并膝关节骨性关节炎患者88例,随机原则分为研究组与对照组,各44例。对照组给予常规静吸复合全身麻醉,研究组在对照组麻醉的基础上给予复合股神经阻滞,检测两组术后空腹血糖值,并记录两组膝关节功能改善情况。结果:研究组术后1 d、3 d与7 d静息状态下和活动状态下的疼痛视觉模拟评分法(Visual Analogue Scale/Score,VAS)评分都显著低于对照组(P<0.05)。研究组术后1 d、3 d与7 d的空腹血糖值都显著低于对照组(P<0.05)。研究组术后1 d、3 d与7 d的患肢膝关节活动度都显著高于对照组(P<0.05)。结论:股神经阻滞联合全麻在老年糖尿病患者TKA中的应用能缓解术后疼痛,减低术后血糖水平,并且促进提高膝关节活动度有益预后。     

A Three-Dimensional Musculoskeletal Model of the Human Knee Joint. Part 2: Analysis of Ligament Function

A three-dimensional model of the knee is used to study ligament function during anterior-posterior (a-p) draw, axial rotation, and isometric contractions of the extensor and flexor muscles. The geometry of the model bones is based on cadaver data. The contacting surfaces of the femur and tibia are modeled as deformable; those of the femur and patella are assumed to be rigid. Twelve elastic elements are used to describe the geometry and mechanical properties of the cruciate ligaments, the collateral ligaments, and the posterior capsule. The model is actuated by thirteen musculotendinous units, each unit represented as a three-element muscle in series with tendon. The calculations show that the forces applied during a-p draw are substantially different from those applied by the muscles during activity. Principles of knee-ligament function based on the results of in vitro experiments may therefore be overstated. Knee-ligament forces during straight a-p draw are determined solely by the changing geometry of the ligaments relative to the bones: ACL force decreases with increasing flexion during anterior draw because the angle between the ACL and the tibial plateau decreases as knee flexion increases; PCL force increases with increasing flexion during posterior draw because the angle between the PCL and the tibial plateau increases. The pattern of ligament loading during activity is governed by the geometry of the muscles spanning the knee: the resultant force in the ACL during isometric knee extension is determined mainly by the changing orientation of the patellar tendon relative to the tibia in the sagittal plane; the resultant force in the PCL during isometric knee flexion is dominated by the angle at which the hamstrings meet the tibia in the sagittal plane.     

An improved OpenSim gait model with multiple degrees of freedom knee joint and knee ligaments

Musculoskeletal models are widely used to investigate joint kinematics and predict muscle force during gait. However, the knee is usually simplified as a one degree of freedom joint and knee ligaments are neglected. The aim of this study was to develop an OpenSim gait model with enhanced knee structures. The knee joint in this study included three rotations and three translations. The three knee rotations and mediolateral translation were independent, with proximodistal and anteroposterior translations occurring as a function of knee flexion/extension. Ten elastic elements described the geometrical and mechanical properties of the anterior and posterior cruciate ligaments (ACL and PCL), and the medial and lateral collateral ligaments (MCL and LCL). The three independent knee rotations were evaluated using OpenSim to observe ligament function. The results showed that the anterior and posterior bundles of ACL and PCL (aACL, pACL and aPCL, pPCL) intersected during knee flexion. The aACL and pACL mainly provided force during knee flexion and adduction, respectively. The aPCL was slack throughout the range of three knee rotations; however, the pPCL was utilised for knee abduction and internal rotation. The LCL was employed for knee adduction and rotation, but was slack beyond 20° of knee flexion. The MCL bundles were mainly used during knee adduction and external rotation. All these results suggest that the functions of knee ligaments in this model approximated the behaviour of the physical knee and the enhanced knee structures can improve the ability to investigate knee joint biomechanics during various gait activities.     

A multibody modelling approach to determine load sharing between passive elements of the lumbar spine

The human spinal segment is an inherently complex structure, a combination of flexible and semi-rigid articulating elements stabilised by seven principal ligaments. An understanding of how mechanical loading is shared among these passive elements of the segment is required to estimate tissue failure stresses. A 3D rigid body model of the complete lumbar spine has been developed to facilitate the prediction of load sharing across the passive elements. In contrast to previous multibody models, this model includes a non-linear, six degrees of freedom intervertebral disc, facet bony articulations and all spinal ligaments. Predictions of segmental kinematics and facet joint forces, in response to pure moment loading (flexion–extension), were compared to published in vitro data. On inclusion of detailed representation of the disc and facets, the multibody model fully captures the non-linear flexibility response of the spinal segment, i.e. coupled motions and a mobile instantaneous centre of rotation. Predicted facet joint forces corresponded well with reported values. For the loading case considered, the model predicted that the ligaments are the main stabilising elements within the physiological motion range; however, the disc resists a greater proportion of the applied load as the spine is fully flexed. In extension, the facets and capsular ligaments provide the principal resistance. Overall patterns of load distribution to the spinal ligaments are in agreement with previous predictions; however, the current model highlights the important role of the intraspinous ligament in flexion and the potentially high risk of failure. Several important refinements to the multibody modelling of the passive elements of the spine have been described, and such an enhanced passive model can be easily integrated into a full musculoskeletal model for the prediction of spinal loading for a variety of daily activities.     

Time-dependent elastohydrodynamic lubrication analysis of total knee replacement under walking conditions

This work is concerned with the lubrication analysis of artificial knee joints, which plays an increasing significant role in clinical performance and longevity of components. Time-dependent elastohydrodynamic lubrication analysis for normal total knee replacement is carried out under the cyclic variation in both load and speed representative of normal walking. An equivalent ellipsoid-on-plane model is adopted to represent an actual artificial knee. A full numerical method is developed to simultaneously solve the Reynolds and elasticity equations using the multigrid technique. The elastic deformation is based on the constrained column model. Results show that, under the combined effect of entraining and squeeze-film actions throughout the walking cycle, the predicted central film thickness tends to decrease in the stance phase but keeps a relatively larger value at the swing phase. Furthermore, the geometry of knee joint implant is verified to play an important role under its lubrication condition, and the length of time period is a key point to influence the lubrication performance of joint components.