水稻耐亚铁毒QTLs的定位

亚铁毒是潜育性水稻土中限制水稻产量的主要因子。利用龙杂8503／IR64的F2和等价的F3群体,在营养液中培养来定位耐亚铁毒的QTLs。通过构建101SSR标记的遗传连锁图谱来确定耐亚铁毒QTLs的位置和特性。借助叶片棕色斑点指数、株高和最大根长3个性状,利用营养液在水稻苗期来评价F2单株、F3群体和亲本龙杂8503、IR64,共检测到叶片棕色斑点指数、株高和最大根长的QTLs20个,分布在水稻的10条染色体上,表明这些性状受多基因控制。控制叶片棕色斑点指数的QTLs分别定位在第1染色体的RM315-RM212、第2染色体的RM6-RM240和第4染色体的RM252-RM451之间。与前人的研究结果比较发现：1）位于第4染色体RM252-RM451之间的控制叶片棕色斑点指数的QTL与水稻功能图谱上控制叶绿素含量减少的QTL的位置一致。另一个位于第1染色体的RM315-RM212之间的控制叶片棕色斑点指数的QTL与水稻功能图谱上位于C178-R2635之间控制叶绿素含量的QTL连锁。2）位于第2染色体RM6-RM240之间的第3个控制叶片棕色斑点指数的QTL与位于RZ58-CD0686的控制钾吸收的QTL连锁。     

小麦纹枯病抗性的QTL分析和抗病基因的分子标记

对RIL-8群体纹枯病抗性进行QTL检测,检测到一个加性QTL,位于1A染色体上,贡献率为21.57%;检测到4对QTL间互作位点,涉及7条染色体,互作贡献率分别为11.63%、6.54%、14.04%、20.01%,互作总贡献率为52.23%.通过对RIL-SES群体118个系检测,发现1个SSR标记Xgwm526,位于2B染色体上,与纹枯病抗病基因距离为27.9cM;一个ISSR标记IS840,与纹枯病抗病基因距离为16.9cM.     

不同水分条件下玉米株高和穗位高的QTL分析

干旱是影响玉米产量的重要因素.在干旱条件下,玉米株高和穗位高往往受到影响,因此是研究耐旱性的重要指标.本研究利用A188×91黄15的F2∶3家系,进行株高和穗位高的数量性状位点(QTL)分析.结果表明,在水分胁迫条件下,分别各有10个QTL与株高和穗位高有关;在水分充足条件下,则检测到各有6个QTL与株高和穗位高有关.各QTL解释的表型变异在7.3%～53.9%之间.位于第8染色体上的QTL个数占总QTL近50%,LOD值均大于4.6,推测该染色体存在控制玉米株高和穗位高QTL的重要区域.本研究在bnlg1812标记附近检测到在水分胁迫下同时控制株高和穗位高的QTL,解释的表型变异在20%以上,该QTL是值得进一步研究和利用的位点.     

作物数量性状基因图位克隆研究进展

对数量性状基因(QTL)的鉴定和克隆不仅有利于从分子水平上阐明作物重要农艺性状的形成机理,而且对于有效开展这些性状的分子育种,进一步提高作物增产潜力具有重要意义.近年来作物QTL图位克隆取得了重要突破,一批QTL被成功克隆,而模式植物基因组研究的快速发展则为作物QTL图位克隆技术带来了新的策略和方法.本文就相关研究的主要进展和发展趋势进行了综述.     

Effector discovery in the fungal wheat pathogen Zymoseptoria tritici

Fungal plant pathogens, such as Zymoseptoria tritici (formerly known as Mycosphaerella graminicola), secrete repertoires of effectors to facilitate infection or trigger host defence mechanisms. The discovery and functional characterization of effectors provides valuable knowledge that can contribute to the design of new and effective disease management strategies. Here, we combined bioinformatics approaches with expression profiling during pathogenesis to identify candidate effectors of Z. tritici. In addition, a genetic approach was conducted to map quantitative trait loci (QTLs) carrying putative effectors, enabling the validation of both complementary strategies for effector discovery. In planta expression profiling revealed that candidate effectors were up‐regulated in successive waves corresponding to consecutive stages of pathogenesis, contrary to candidates identified by QTL mapping that were, overall, expressed at low levels. Functional analyses of two top candidate effectors (SSP15 and SSP18) showed their dispensability for Z. tritici pathogenesis. These analyses reveal that generally adopted criteria, such as protein size, cysteine residues and expression during pathogenesis, may preclude an unbiased effector discovery. Indeed, genetic mapping of genomic regions involved in specificity render alternative effector candidates that do not match the aforementioned criteria, but should nevertheless be considered as promising new leads for effectors that are crucial for the Z. tritici–wheat pathosystem.     

A high density GBS map of bread wheat and its application for dissecting complex disease resistance traits

Background

Genotyping-by-sequencing (GBS) is a high-throughput genotyping approach that is starting to be used in several crop species, including bread wheat. Anchoring GBS tags on chromosomes is an important step towards utilizing them for wheat genetic improvement. Here we use genetic linkage mapping to construct a consensus map containing 28644 GBS markers.

Results

Three RIL populations, PBW343 × Kingbird, PBW343 × Kenya Swara and PBW343 × Muu, which share a common parent, were used to minimize the impact of potential structural genomic variation on consensus-map quality. The consensus map comprised 3757 unique positions, and the average marker distance was 0.88 cM, obtained by calculating the average distance between two adjacent unique positions. Significant variation of segregation distortion was observed across the three populations. The consensus map was validated by comparing positions of known rust resistance genes, and comparing them to wheat reference genome sequences recently published by the International Wheat Genome Sequencing Consortium, Rye and Ae. tauschii genomes. Three well-characterized rust resistance genes (Sr58/Lr46/Yr29, Sr2/Yr30/Lr27, and Sr57/Lr34/Yr18) and 15 published QTLs for wheat rusts were validated with high resolution. Fifty-two per cent of GBS tags on the consensus map were successfully aligned through BLAST to the right chromosomes on the wheat reference genome sequence.

Conclusion

The consensus map should provide a useful basis for analyzing genome-wide variation of complex traits. The identified genes can then be explored as genetic markers to be used in genomic applications in wheat breeding.

Electronic supplementary material

The online version of this article (doi:10.1186/s12864-015-1424-5) contains supplementary material, which is available to authorized users.     

Genomic architecture of habitat‐related divergence and signature of directional selection in the body shapes of Gnathopogon fishes

Evolution of ecomorphologically relevant traits such as body shapes is important to colonize and persist in a novel environment. Habitat‐related adaptive divergence of these traits is therefore common among animals. We studied the genomic architecture of habitat‐related divergence in the body shape of Gnathopogon fishes, a novel example of lake–stream ecomorphological divergence, and tested for the action of directional selection on body shape differentiation. Compared to stream‐dwelling Gnathopogon elongatus, the sister species Gnathopogon caerulescens, exclusively inhabiting a large ancient lake, had an elongated body, increased proportion of the caudal region and small head, which would be advantageous in the limnetic environment. Using an F₂ interspecific cross between the two Gnathopogon species (195 individuals), quantitative trait locus (QTL) analysis with geometric morphometric quantification of body shape and restriction‐site associated DNA sequencing‐derived markers (1622 loci) identified 26 significant QTLs associated with the interspecific differences of body shape‐related traits. These QTLs had small to moderate effects, supporting polygenic inheritance of the body shape‐related traits. Each QTL was mostly located on different genomic regions, while colocalized QTLs were detected for some ecomorphologically relevant traits that are proxy of body and caudal peduncle depths, suggesting different degree of modularity among traits. The directions of the body shape QTLs were mostly consistent with the interspecific difference, and QTL sign test suggested a genetic signature of directional selection in the body shape divergence. Thus, we successfully elucidated the genomic architecture underlying the adaptive changes of the quantitative and complex morphological trait in a novel system.     

高粱抗旱性鉴定方法及相关QTL定位研究进展

高粱[Sorghum bicolor(L.)Moench]是世界上重要的粮食、饲料、纤维和能源作物之一,因其根系发达、叶片蜡质层厚密、渗透调节能力强、光合效率高等特点,在干旱条件下具有很强的适应性。因此,高粱在气候变化、水资源短缺和满足世界粮食需求等方面发挥着重要的作用。干旱是制约世界农业生产的主要逆境因素之一,如何解决高粱在干旱条件下的产量问题仍然是育种工作者面临的巨大挑战。为了给高粱抗旱育种提供参考,本文综述了高粱抗旱性的鉴定方法、鉴定指标和优异抗旱种质资源,以及高粱花前抗旱和花后抗旱相关性状QTL定位的研究进展,并对高粱抗旱性研究的发展趋势提出了展望。认为应建立规模化高粱种质资源抗旱鉴定体系、选择合适的全生育期自然鉴定地点,筛选抗旱种质资源;利用高通量测序技术,高效挖掘高粱抗旱性基因;建立高粱遗传转化体系、运用基因编辑等生物技术,加快高粱抗旱育种进程。     

玉米抗南方锈病基因的QTL定位

为发掘新的抗南方锈病基因资源,本研究以感病自交系黄早四为母本、抗病自交系W456为父本,构建F2群体并开展抗病基因定位研究。采用人工接种鉴定的方法对两个亲本、F1、F2群体及对照材料进行表型鉴定和遗传分析。利用均匀覆盖10条染色体的200个SSR标记,分析240个F2单株的基因型并构建含有200个SSR位点的遗传连锁图,连锁图总长度3331 cM,标记间平均距离16.6 cM。使用QTL IciMapping V4.1软件中的完备区间作图法对抗病QTL进行分析,共检测到6个控制南方锈病的QTL:qSCR3、qSCR7、qSCR8-1、qSCR8-2、qSCR9和qSCR10,邻近标记分别为umc2105和umc1729、umc1066和bnlg2271、umc1904和umc1984、umc1984和bnlg1651、umc1957和bnlg1401、umc2034和umc1291,分别位于3、7、8、9和10号染色体上,其中8号染色体上有两个位点,标记区间长度在5～19 cM之间。单个QTL的表型贡献率在2.61%～24.19%之间,可以解释表型总变异的62.3%,其中3个QTL贡献率大于10%,位于10号染色体上的qSCR10贡献率最大,可解释表型变异的24.19%。通过对目标区间标记加密,将该位点的定位区间进一步缩小到2.51 cM内,与两侧标记的距离分别是2.15 cM和0.36 cM。初步定位得到10号染色体上存在抗南方锈病的主效QTL,可为抗病品种的培育提供参考。     

Genome‐wide association study of six quality traits reveals the association of the TaRPP13L1 gene with flour colour in Chinese bread wheat

Flour colour, kernel hardness, grain protein content and wet gluten content are important quality properties that determine end use in bread wheat. Here, a wheat 90K genotyping assay was used for a genome‐wide association study (GWAS) of the six quality‐related traits in Chinese wheat cultivars in eight environments over four years. A total of 846 significant single nucleotide polymorphisms (SNPs) were identified, explaining approximately 30% of the phenotypic variation on average, and 103 multienvironment‐significant SNPs were detected in more than four environments. Quantitative trait loci (QTL) mapping in the biparent population confirmed some important SNP loci. Moreover, it was determined that some important genes were associated with the six quality traits, including some known functional genes and annotated unknown functional genes. Of the annotated unknown functional genes, it was verified that TaRPP13L1 was associated with flour colour. Wheat cultivars or lines with TaRPP13L1‐B1a showed extremely significantly higher flour redness and lower yellowness than those with TaRPP13L1‐B1b in the Chinese wheat natural population and the doubled haploid (DH) population. Two tetraploid wheat lines with premature stop codons of the TaRPP13L1 gene mutagenized by ethyl methanesulfonate (EMS) showed extremely significantly higher flour redness and lower yellowness than wild type. Our data suggest that the TaRPP13L1 gene plays an important role in modulating wheat flour colour. This study provides useful information for further dissection of the genetic basis of flour colour and also provides valuable genes or genetic loci for marker‐assisted selection to improve the process of breeding quality wheat in China.