Synthesis of fluorescent and low cytotoxicity phenol formaldehyde resin (PFR)@Ag composites for cell imaging and antibacterial activity

Ag nanoparticles (NPs) were loaded onto the surface of phenol formaldehyde resin (PFR) NPs without any reducing agent. The as‐synthesized PFR@Ag composites have low cytotoxicity, which makes them promising antibacterial agents. Furthermore, the good fluorescence of PFR could be used for cell imaging. Copyright © 2015 John Wiley & Sons, Ltd.     

Optimisation of a microwave-assisted method for extracting withaferin A from Withania somnifera Dunal. using central composite design

Introduction – Recently, there have been growing attention on the modification and optimisation of new extraction and quantification methods, caused by the lack of environmentally friendly methodologies for the extraction of phytochemicals from complex matrices. In the case of pharmaceutical compounds, not only the extraction procedure but also the analysis method should be efficient, precise, fast and easy. Objectives – The essential pharmaceutical characteristics and trace concentration of withanolides led us to modify and optimise the previously reported extraction and quantification procedure for withaferin A (WA) as a candidate for withanolides. Matrial and methods – The WA from the air‐dried aerial part of Withania somnifera Dunal. was extracted using a microwave‐assisted extraction (MAE) technique. Four variables affecting the extraction procedure were optimised using the central composite design approach. The method of high‐performance thin‐layer chromatography assay was validated and applied for the quantification of each experiment. Results – The optimum values of factors were: extraction time (150 s), extraction temperature (68°C) and 17 mL of methanol : water in the ratio 25 : 75 as extracting solvent. The solvent system consisted of ethyl acetate : toluene : formic acid : 2‐propanol (7.0 : 2.0 : 0.5 : 0.5, v/v/v/v), and densitometric scanning at 220 nm was applied for the analysis. The dynamic linear range, LOD, LOQ and recovery with the inter‐day, and intra‐day RSDs of the developed method indicated the validity of the method. Conclusion – A pressurised MAE method for extracting WA from the plant's aerial part was optimised using factorial‐based design. The net effect of time, temperature, solvent volume and its ratio suggests that the yield of WA increases until each factor reaches its optimum value, and decreases with further increase in temperature or solvent ratio. Copyright © 2010 John Wiley & Sons, Ltd.     

Optimization of riboflavin production by recombinant <Emphasis Type="Italic">Bacillus subtilis</Emphasis> RH44 using statistical designs

A sequential optimization strategy, based on statistical experimental designs, was used to enhance the production of riboflavin by recombinant Bacillus subtilis RH44. In the first instance, the medium components were optimized in shake flask cultures. After preliminary experiments of nitrogen source selection, the two-level Plackett–Burman (PB) design was implemented to screen medium components that significantly influence riboflavin production. Among the 15 variables tested, glucose, NaNO₃, K₂HPO₄, ZnSO₄, and MnCl₂ were identified as the most significant factors (confidence levels above 95%) for riboflavin production. The optimal values of these five variables were determined by response surface methodology (RSM) based on the central composite design (CCD). The validity of the model developed was verified, and the optimum medium led to a maximum riboflavin concentration of 6.65 g/l, which was 44.3 and 76.4% higher than the improved medium and the basal medium, respectively. A glucose-limited fed-batch culture profile in a 5-l fermentor was consequently designed according to the above optimum medium in shake flasks. A final riboflavin concentration of 16.36 g/l was obtained in 48 h, which further verified the practicability of this optimum strategy.     

Fabrication of sucrose biosensor based on single mode planar optical waveguide using co-immobilized plant invertase and GOD

In present studies, the new optical sensing platform based on optical planar waveguide (OPWG) for sucrose estimation was reported. An evanescent-wave biosensor was designed by using novel agarose–guar gum (AG) biopolymer composite sol–gel with entrapped enzymes (acid invertase (INV) and glucose oxidase (GOD)). Partially purified watermelon invertase isolated from Citrullus vulgaris fruit (specific activity 832 units mg⁻¹) in combination with GOD was physically entrapped in AG sol–gel and cladded on the surface of optical planar waveguide. Na⁺–K⁺ ion-exchanged glass optical waveguides were prepared and employed for the fabrication of sucrose biosensor. By addressing the enzyme modified waveguide structure with, the optogeometric properties of adsorbed enzyme layer (12 μm) at the sensor solid–liquid interface were studied. The OPWG sensor with short response time (110 s) was characterized using the 0.2 M acetate buffer, pH 5.5. The fabricated sucrose sensor showed concentration dependent linear response in the range 1 × 10⁻¹⁰ to 1 × 10⁻⁶ M of sucrose. Lower limit of detection of this novel AG–INV–GOD cladded OPWG sensor was found to be 2.5 × 10⁻¹¹ M sucrose, which indicates that the developed biosensor has higher sensitivity towards sucrose as compared to earlier reported sensors using various transducer systems. Biochips when stored at room temperature, showed high stability for 81 days with 80% retention of original sensitivity. These sucrose sensing biochips showed good operational efficiency for 10 cycles. The proper confinement of acid invertase and glucose oxidase in hydrogel composite was confirmed by scanning electron microscopy (SEM) images. The constructed OPWG sensor is versatile, easy to fabricate and can be used for sucrose measurements with very high sensitivity.     

Zinc tetraaminophthalocyanine-Fe3O4 nanoparticle composite for laccase immobilization

Zinc tetraaminophthalocyanine-Fe3O4 nanoparticle composites were prepared by organic-inorganic complex technology and characterized. It has been proved that the ZnTAPc dispersed randomly onto the surface of Fe3O4 nanoparticles to form molecular dispersion layer and there was a relatively strong bond between central zinc cation and oxygen. The nanoparticle composite took the shape of roundish spheres with the mean diameter of about 15 nm. Active amino groups of magnetic carriers could be used to bind laccase via glutaraldehyde. The optimal pH for the activity of the immobilized laccases and free laccase were the same at pH 3.0 and the optimal temperature for laccase immobilization on ZnTAPc-Fe3O4 nanoparticle composite was 45 degrees. The immobilization yields and K(m) value of the laccase immobilized on ZnTAPc-Fe3O4 nanoparticle composite were 25% and 20.1 microM, respectively. This kind of immobilized laccase has good thermal, storage and operation stability, and could be used as the sensing biocomponent for the fiber optic biosensor based on enzyme catalysis.     

Improvement of sordarin production through process optimization: combining traditional approaches with DOE

BMS-353645, also known as sordarin, was of interest based on its activity against pathogenic fungi. The objective of these studies was to provide high quality starting substrate for chemical modification aimed at further improving biological activity, with particular interest in the inhibition of Aspergillus. In the work presented here, Design of Experiments, or DOE, was successfully combined with traditional approaches to significantly improve sordarin yields in fermentation flasks. Overall, yields were increased 25-fold from <100 μg/g to as high as 2,609 μg/g in flasks through the use of various medium and conduction changes supplemented with DOE. The improved process was then successfully scaled to pilot plant tanks with the best batch producing 2,389 μg/g sordarin at the 250-l scale.     

Identification of QTLs for Yield and Associated Traits in F₂ Population of Rice

Identification of quantitative trait loci (QTLs) controlling yield and yield-related traits in rice was performed in the F₂ mapping population derived from parental rice genotypes DHMAS and K343. A total of 30 QTLs governing nine different traits were identified using the composite interval mapping (CIM) method. Four QTLs were mapped for number of tillers per plant on chromosomes 1 (2 QTLs), 2 and 3; three QTLs for panicle number per plant on chromosomes 1 (2 QTLs) and 3; four QTLs for plant height on chromosomes 2, 4, 5 and 6; one QTL for spikelet density on chromosome 5; four QTLs for spikelet fertility percentage (SFP) on chromosomes 2, 3 and 5 (2 QTLs); two QTLs for grain length on chromosomes 1 and 8; three QTLs for grain width on chromosomes1, 3 and 8; three QTLs for 1000-grain weight (TGW) on chromosomes 1, 4 and 8 and six QTLs for yield per plant (YPP) on chromosomes 2 (3 QTLs), 4, 6 and 8. Most of the QTLs were detected on chromosome 2, so further studies on chromosome 2 could help unlock some new chapters of QTL for this cross of rice variety. Identified QTLs elucidating high phenotypic variance can be used for marker-assisted selection (MAS) breeding. Further, the exploitation of information regarding molecular markers tightly linked to QTLs governing these traits will facilitate future crop improvement strategies in rice.     

高产青霉素酰化酶巨大芽胞杆菌的诱变选育及产酶条件优化

【目的】选育高产青霉素G酰化酶(PGA)工业菌株。【方法】采用LiCl-紫外线复合诱变以及常压室温等离子体(ARTP)诱变技术对巨大芽胞杆菌(Bacillus megaterium) ATCC 14945进行处理。处理菌体涂平板后,将长出的菌落接种到液体培养基中,向培养6 h后的二代菌液中添加终浓度为0.1%的苯乙酸,28 °C、250 r/min条件下诱导培养40 h。对离心后获得的上清(粗酶液)采用NIPAB法测定PGA酶活力。以PGA酶活力最高的菌株为材料,对苯乙酸最佳添加量和最佳诱导时间进行优化,采用NIPAB法测定PGA酶活力。采用SDS-PAGE检测诱变前后巨大芽胞杆菌粗酶液中PGA的蛋白特性。【结果】从诱变菌落中筛选到PGA酶活力为39.60 U/mL的菌株12-4,酶活力比出发菌株提高了8.5倍。该菌株在液体培养6 h后添加终浓度为0.2%的苯乙酸,继续培养50 h后,PGA酶活力可达78.45 U/mL,比出发菌株提高了16.8倍。诱变前后菌株培养液中的PGA蛋白均具α、β亚基;诱变后菌株PGA α亚基的量没有明显变化,β亚基的量明显增多;α、β亚基之间的蛋白条带明显增多。【结论】采用诱变技术可提高巨大芽胞杆菌PGA活性,获得的诱变菌株12-4及培养条件对PGA工业化生产具有重要价值。     

Harmonisation of chemical and biological process in development of a hybrid technology for treatment of recalcitrant metalworking fluid

Disposal of operationally exhausted metalworking fluids (MWFs) is enormously challenging. In this study the feasibility of employing a sequential Fenton-biological oxidation for the treatment of recalcitrant components of MWF wastewater was investigated. A statistical experimental design was employed to address Fenton reagent (H?O?, Fe2?) dose optimisation which ensured minimal concentrations of the reagents, thus making the treatment environmentally less toxic to subsequent biological steps and economically viable. This was achieved by employing a five-level-two-variable central composite experimental design. The results demonstrated that Fenton pre-treatment of the MWF effluent greatly improved biodegradability index (BOD?)/COD increased from 0.160 to 0.538) with a synchronous lowering in the toxicity of the wastewater, making the recalcitrant component more amenable to subsequent biological treatment. An overall decrease of 92% and 86% in chemical oxygen demand (COD) and total organic carbon (TOC), respectively, was achieved by the two-step treatment method developed.