低功率He-Ne激光照射黑曲霉的方法与效应

目的:探索低功率He-Ne激光对柠檬酸生产菌黑曲霉诱变育种的简易方法。方法:应用带扩束镜的低功率He-Ne激光装置,在无菌条件下对柠檬酸生产菌黑曲霉的单孢子膜进行不同时间的垂直照射,无菌水洗脱,指示性平板筛选,液体培养,测定黑曲霉诱变菌株的柠檬酸产量。结果:不同时间的激光照射黑曲霉单孢子,其存活率与激光照射时间没有线性关系。激光照射6min,黑曲霉M2代产酸的正变率高达37.5%,而此时的存活率也高达40.0%。获得了黑曲霉柠檬酸产酸率提高了10%的突变菌株,为黑曲霉的遗传育种提供了材料。结论:这种方法便于在无菌条件下操作,保证了激光照射黑曲霉单孢子的均匀性,是一种简便易行的微生物诱变育种方法。     

XeCl准分子紫外激光辐照生物大分子BSA(V)对其蛋白质结构的影响

XeCl(308 nm)准分子紫外激光(单脉冲输出能量25 mJ,33.3 mJ~34.4 mJ,脉冲频率每秒两次,光斑15 mm×7 mm或4.5 mm×0.5 mm,透镜焦距300 mm),辐照小牛血清白蛋白[bovine serum albumin fraction V,BSA(V)]固体或溶液样品的时间分别为15 s、30 s、45 s或60 s;样品距激光光源的距离分别为:150 mm、250mm、290 mm、340 mm。改变激光参量辐照BSA(V)样品和其对照,用光谱法测试其FT-IR(IR)、Vis-UV(UV)、FR光谱,并比较分析。受辐照后的BSA(V)与主链构象相关的酰胺平面的特征FT-IR谱线,特别是与蛋白质二级结构敏感的酰胺面Ⅰ,1 652 cm-1;与α-螺旋结构相关的FT-IR 1 140 cm-1~500 cm-1;及与蛋白质侧链氨基酸残基Tyr、Phe、Trp相关的特征峰UV277.6 nm、UV216 nm和FR 340 nm、FR 680 nm的峰强度(T%或OD%或Q%)和它们的峰位(cm-1或nm)均受激光辐照的影响,其影响程度与使用的XeCl激光参量的改变有一定的敏感性和相关性。实验结果与讨论对认识激光生物学效应的分子机理、探索建立激光-生物学效应的关系参数,以便进一步发现新的有效的激光生物学效应,发现和认识潜在(后继)的正、负面的激光生物学效应,进而加以调控有一定的理论与实用参考价值。     

利用荧光共振能量转移技术监测高通量低能量激光诱导细胞凋亡过程中caspase-3活性的动态变化

荧光共振能量转移可用于对生物大分子之间的距离进行定性、定量检测。应用荧光共振能量转移技术对高通量低能量激光诱导肺腺癌细胞凋亡过程中caspase-3的激活过程进行实时动态监测。实验结果表明:高通量低能量激光可以诱导肺腺癌细胞(human lung adenocarcinoma cell,ASTC-a-1)凋亡。同时荧光共振能量转移技术是一个有效的监测caspase-3在凋亡过程中活性动态变化的方法。     

无损光学法测量人胃粘膜/粘膜下层组织的光衰减特性

研究了人正常胃粘膜及粘膜下层组织对640 nm,690 nm,740 nm,790 nm,840 nm和890 nm波长的钛宝石激光的光衰减特性以及光学穿透深度,实验采用激光斜入射式空间分辨反射光和CCD探测器以及非线性拟合确定组织光学特性。结果表明:人正常胃粘膜及粘膜下层组织对六个波长的激光的有效衰减系数和光学穿透深度都是随着激光波长的变化而变化的。其有效衰减系数的最大值在640 nm,其值为1.12 mm-1,最小值在790 nm,其值为0.901 mm-1,最大差异在790 nm和890 nm之间,其值为19.9%,最小差异在690 nm和740nm之间,其值为2.83%。其光学穿透深度的最大值在790 nm,其值为1.11 mm,最小值在640 nm,其值为0.890 mm,最大差异在640 nm和790 nm之间,其值为24.7%,最小差异在690 nm和740 nm之间,其值为2.97%。     

利用激光扫描共聚焦显微镜研究植物细胞发育形态学变化

通过激光扫描共聚焦显微镜,利用不同种类(波长)的激光研究植物细胞发育形态学变化。结果表明,利用紫外激光(351 nm)扫描可以清楚地观察到拟南芥叶片表皮细胞的形态及其变化,在已分化的叶片表皮上可观察到包括“铺垫”表皮细胞(epidermal pavement cells)、气孔保卫细胞(guard cell)、气孔伴胞(subsidiarycells)、表皮毛细胞(trichomes)和表皮毛的足细胞(socket cells)等多种形态不同的细胞种类;利用蓝光激光(488nm)辅助曙红浅染,可清晰地显示出拟南芥根生长区内部的各种原始细胞,包括静止区(quiescent center)细胞、皮层/内皮层原始细胞(cortex/endodermal initial cell)、表皮/根冠原始细胞(epidermal/root cap initial cell)和中柱/根冠原始细胞(columella/root cap initial cell)等。利用双光子激光(800 nm)连续扫描30 s可以诱发叶绿体产生自发荧光,并可观察到叶绿体在叶肉细胞中的运动轨迹。结果说明激光扫描共聚焦显微镜在植物细胞形态及发育研究上具有独特的功能。     

激光生物学技术研究高脂血症大鼠红细胞变形能力改变及其机制

目的:通过研究红细胞膜流动性以及红细胞骨架结构的改变,进一步探讨高脂血症大鼠红细胞变形能力改变的机制。方法:16只Wistar大鼠随机分为两组:高血症组和对照组。高脂组给予高脂饮食。16周后,腹主动脉采血,采用酶比色法检测血浆甘油三脂、胆固醇含量;并利用激光衍射法测定红细胞变形指数、取向指数,荧光偏振法测定红细胞膜流动性,激光共聚焦显微镜观测红细胞骨架改变和红细胞F-actin的含量。结果:发现高脂血症大鼠红细胞的变形指数、取向指数以及红细胞膜的流动性显著降低(P<0.05),红细胞形态和骨架发生改变,F-actin含量显著降低(P<0.05)。结论:高脂血症大鼠红细胞变形能力降低与红细胞膜结构改变有一定的关系。     

超脉冲CO2激光联合肝素钠治疗睑黄疣疗效评价

目的:观察超脉冲CO2激光联合肝素钠治疗睑黄疣的疗效及复发情况。方法:对77例睑黄疣患者进行联合治疗(治疗组),并设立单用肝素钠局封(药物组65例)和单用超脉冲CO2激光治疗(激光组58例)作为对照。结果:治疗组痊愈58例,显效16例,有效率96.1%;半年随访43例,复发1例,复发率2.3%。药物组有效率78.5%,随访37例,复发9例(24.3%);激光组有效率86.2%,随访27例,复发6例(22.2%)。治疗组与药物组有效率、复发率经x2检验,P<0.01,治疗组疗效优于药物组。治疗组与激光组有效率P>0.01,复发率P<0.05,两组疗效无显著差异,治疗组复发率低于激光组。结论:超脉冲CO2激光联合肝素钠治疗睑黄疣疗效好。     

Usefulness of marker‐assisted selection to improve maize for increased resistance to Sesamia nonagrioides attack with no detrimental effect on yield

Two decades of investigations on maize resistance to Mediterranean corn borer (Sesamia nonagrioides Lefebvre; MCB) have shown that breeding for increased resistance to stem tunnelling by MCB often resulted in reduced yield because significant genetic correlation between both traits exists in some backgrounds. Unlike phenotypic selection, marker‐assisted selection (MAS) could differentiate markers linked only to one trait from those linked simultaneously to yield potential and susceptibility to the pest. In the current study, the suitability of MAS for improving resistance to stem tunnelling without adverse effects on yield has been tested. The unfavourable genetic relationship between yield potential and susceptibility could be overcome using MAS. Gains obtained using MAS were weak, because genetic variance explained by the quantitative trait loci (QTL) was low but results encourage us to persevere in using marker information for simultaneous improvement of resistance and yield especially if genome‐wide approaches are applied. Approaches to detect QTL are widely used, but studies on the suitability of markers linked to QTL for performing MAS have been mostly neglected.     

Effects of seating load magnitude and load orientation on seating mechanics in 5°40′ mixed-alloy modular taper junctions

BackgroundMechanically-assisted crevice corrosion of modular tapers continues to be a concern in total joint replacements. Surgical factors that may affect taper seating mechanics include seating load magnitude and load orientation. Seating mechanics is defined as the seating load versus displacement behavior. In this study, mixed-alloy (CoCrMo/Ti-6Al-4V) modular head-neck 5°40′ taper junctions were seated over a range of axially-oriented loads and off-axis orientations, capturing load-displacement during seating. The goals of the study were to assess the effects of seating load magnitude and load orientation on seating mechanics and correlate those findings with the taper pull-off load.MethodsA testing fixture measured head-neck seating displacement as the load was quasistatically applied. Motion was captured using two non-contact differential variable reluctance transducers which were mounted to the neck targeting the head. Seating experiments ranged from 1000 N to 8000 N. Load orientation ranged from 0° to 20° at 4000 N.ResultsSeating load-displacement behavior at different seating loads showed a consistent characteristic behavior. Testing demonstrated increased seating displacement with seating load. Pull-off loads increased with seating load and were approximately 44% of the seating load across the range of seating loads investigated. Seating load orientation up to 20° had no significant effect on seating displacement and taper pull-off load.ConclusionIncreased seating load magnitude increased seating displacement, work of seating and pull-off loads in mixed-alloy 5°40′ head-neck tapers. Altering load orientation up to 20° off-axis had no significant effect. Direct measurements of seating mechanics provides insights into the locking of taper junctions.