Electrochemical impedance spectroscopy for study of aptamer-thrombin interfacial interactions

A simple and highly sensitive electrochemical impedance spectroscopy (EIS) biosensor based on a thrombin-binding aptamer as molecular recognition element was developed for the determination of thrombin. The signal enhancement was achieved by using gold nanoparticles (GNPs), which was electrodeposited onto a glassy carbon electrode (GCE), as a platform for the immobilization of the thiolated aptamer. In the measurement of thrombin, the change in interfacial electron transfer resistance of the biosensor using a redox couple of [Fe(CN)₆]^3−/4− as the probe was monitored. The increase of the electron transfer resistance of the biosensor is linear with the concentration of thrombin in the range from 0.12 nM to 30 nM. The association and dissociation rate constants of the immobilized aptamer–thrombin complex were 6.7 × 10³ M⁻¹ s⁻¹ and 1.0 × 10⁻⁴ s⁻¹, respectively. The association and dissociation constants of three different immobilized aptamers binding with thrombin were measured and the difference of the dissociation constants obtained was discussed. This work demonstrates that GNPs electrodeposited on GCE used as a platform for the immobilization of the thiolated aptamer can improve the sensitivity of an EIS biosensor for the determination of protein. This work also demonstrates that EIS method is an efficient method for the determination of association and dissociation constants on GNPs modified GCE.     

Development of a quantitative relationship between inhibition percentage and both incubation time and inhibitor concentration for inhibition biosensors—theoretical and practical considerations

Theoretical and practical insights into the design and development of immobilised enzyme inhibition biosensors are reported. A general mathematical expression relating the percent of enzyme inhibition (i.e. the analytical signal) to both the inhibitor concentration and the incubation time is presented. The relevant physical, chemical and biochemical parameters required by the model are developed and discussed in terms of the inhibition of acetylcholinesterase by the organophosphorous pesticide, paraoxon. A second enzyme, choline oxidase and an amperometric transducer are used to facilitate the determination acetylcholinesterase inhibitor.     

Interfacial bioconjugation on emulsion droplet for biosensors

Interfacial bioconjugation methods are developed for intact liquid emulsion droplets. Complex emulsion droplets having internal hydrocarbon and fluorocarbon immiscible structured phases maintain a dynamic interface for controlled interfacial reactivity. The internal morphological change after binding to biomolecules is readily visualized and detected by light transmission, which provides a platform for the formation of inexpensive and portable bio-sensing assays for enzymes, antibodies, nucleic acids and carbohydrates.     

Assembly of polymer/lipid composite films on solids based on hairy rod LB-films

The present work deals with the assembly of multilayers or rod-like polymers with hydrophobic side chains (called hairy rods) and their potential application as ultrathin polymer cushions for the build-up of self healing supported membranes on various solids (Si/SiO₂-wafer, gold covered substrates). Three types of hairy rods were studied: Isopentyl cellulose (IPC), phtalocyaniatopolysiloxane with mixed alkane side chains (PCPS) and trimethylsilane cellulose (TMCS). Detailed analysis of the thickness of supported multilayers as a function of the number of deposited monolayers with ellipsometry, near infrared surface plasmon resonance (NIR-SPR), a quartz crystal microbalance (QCM) and reflection interference contrast microscopy (RICM), show that the basic building blocks of hairy rod multilayers are bilayers with the hydrophobic surfaces of the monolayers facing each other. Continuous and stable firms of hairy rods can be deposited if the hydrophobicities of the solid surface and the monolayer are matched. It is demonstrated by lateral diffusion measurements (using photobleaching techniques) that continuous phospholipid bilayers can be deposited onto multilayers of rigid rods of TMCS after hydrophilization by cleavage of trimethylsilane side chains in HCl-vapour, while stable lipid monolayers can be deposited onto hydrophobic surfaces of rigid rod layers. NIR-SPR allows the observation of double band reflectivity curves at interfaces separating different surface layers and thus offers the possibility of differential detection of ligand binding at the interface of differently functionalized domains. Received: 2 February 1996 / Accepted: 28 October 1996     

Current trends in endotoxin detection and analysis of endotoxin–protein interactions

Endotoxin is a type of pyrogen that can be found in Gram-negative bacteria. Endotoxin can form a stable interaction with other biomolecules thus making its removal difficult especially during the production of biopharmaceutical drugs. The prevention of endotoxins from contaminating biopharmaceutical products is paramount as endotoxin contamination, even in small quantities, can result in fever, inflammation, sepsis, tissue damage and even lead to death. Highly sensitive and accurate detection of endotoxins are keys in the development of biopharmaceutical products derived from Gram-negative bacteria. It will facilitate the study of the intermolecular interaction of an endotoxin with other biomolecules, hence the selection of appropriate endotoxin removal strategies. Currently, most researchers rely on the conventional LAL-based endotoxin detection method. However, new methods have been and are being developed to overcome the problems associated with the LAL-based method. This review paper highlights the current research trends in endotoxin detection from conventional methods to newly developed biosensors. Additionally, it also provides an overview of the use of electron microscopy, dynamic light scattering (DLS), fluorescence resonance energy transfer (FRET) and docking programs in the endotoxin–protein analysis.     

Development of AC microelectrophoresis for rapid protein affinity evaluation

We have developed a new method for evaluating the affinity interactions between two different proteins by applying an alternating current (AC) voltage to a micro-flow channel. An AC voltage was applied to the protein-modified microspheres in the micro-flow channel, which resulted in the oscillation of the microspheres owing to their surface charges. The oscillation amplitude showed a linear relationship with the charge density of the microspheres. As an example for protein affinity measurement, the amplitude changes of a profilin-modified microsphere were measured by the addition of actin. In the same electrical condition, the oscillation amplitude of the profilin-modified microsphere increased by ≈175% by binding with actin. Similar results in the principle were obtained for the affinity interaction between biotin and streptavidin. The results showed that the higher the charge density of the microspheres induced by binding with different proteins, the higher the oscillation amplitude of the microspheres, thus, suggesting a possible application of the micro-flow channel and AC voltage on the protein property study, as well as on the biosensor application using the oscillation amplitude changes.     

Enzymes and proteins from extremophiles as hyperstable probes in nanotechnology: the use of D-trehalose/D-maltose-binding protein from the hyperthermophilic archaeon <Emphasis Type="Italic">Thermococcus litoralis</Emphasis> for sugars monitoring

The D-trehalose/D-maltose-binding protein (TMBP), a monomeric protein of 48 kDa, is one component of the trehalose and maltose (Mal) uptake system. In the hyperthermophilic archaeon Thermococcus litoralis, this is mediated by a protein-dependent ATP-binding cassette system transporter. The gene coding for a thermostable TMBP from the archaeon T. litoralis has been cloned, and the recombinant protein has been expressed in E. coli. The recombinant TMBP has been purified to homogeneity and characterized. It exhibits the same functional and structural properties as the native one. In fact, it is highly thermostable and binds sugars, such as maltose, trehalose and glucose, with high affinity. In this work, we have immobilized TMBP on a porous silicon wafer. The immobilization of TMBP to the chip was monitored by reflectivity and Fourier Transformed Infrared spectroscopy. Furthermore, we have tested the optical response of the protein-Chip complex to glucose binding. The obtained data suggest the use of this protein for the design of advanced optical non-consuming analyte biosensors for glucose detection. The authors wish to dedicate this work to Prof. Ignacy Gryczynski, University of North Texas, TX, USA, for his outstanding contribution to the development of new sensing methodologies.     

Emerging high-throughput approaches to analyze bioremediation of sites contaminated with hazardous and/or recalcitrant wastes

Sustainable development requires the promotion of environmental management and a constant search for new technologies to treat a wide range of aquatic and terrestrial habitats contaminated by increasing anthropogenic activities. Bioremediation, i.e. the elimination of natural or xenobiotic pollutants by living organisms, is an environmentally friendly and cost-effective alternative to physico-chemical cleanup options. However, the strategy and outcome of bioremediation in open systems or confined environments depend on a variety of physico-chemical and biological factors that need to be assessed and monitored. In particular, microorganisms are key players in bioremediation applications, yet their catabolic potential and their dynamics in situ remain poorly characterized. To perform a comprehensive assessment of the biodegradative potential of a contaminated site and efficiently monitor changes in the structure and activities of microbial communities involved in bioremediation processes, sensitive, fast and large-scale methods are needed. Over the last few years, the scientific literature has revealed the progressive emergence of genomic high-throughput technologies in environmental microbiology and biotechnology. In this review, we discuss various high--throughput techniques and their possible--or already demonstrated-application to assess biotreatment of contaminated environments.     

Recombinant glucose oxidase from Penicillium amagasakiense for efficient bioelectrochemical applications in physiological conditions

GOX is the most widely used enzyme for the development of electrochemical glucose biosensors and biofuel cell in physiological conditions. The present work describes the production of a recombinant glucose oxidase from Penicillium amagasakiense (yGOXpenag) displaying a more efficient glucose catalysis (k_cat/K_M(glucose) = 93 μM⁻¹ s⁻¹) than the native GOX from Aspergillus niger (nGOXaspng), which is the most industrially used (k_cat/K_M(glucose) = 27 μM⁻¹ s⁻¹). Expression in Pichia pastoris allowed easy production and purification of the recombinant active enzyme, without overglycosylation. Its biotechnological interest was further evaluated by measuring kinetics of ferrocinium-methanol (FM_ox) reduction, which is commonly used for electron transfer to the electrode surface. Despite their homologies in sequence and structure, pH-dependant FM_ox reduction was different between the two enzymes. At physiological pH and temperature, we observed that electron transfer to the redox mediator is also more efficient for yGOXpenag than for nGOXaspng(k_cat/K_M(FM_ox) = 27 μM⁻¹ s⁻¹ and 17 μM⁻¹ s⁻¹ respectively). In our model system, the catalytic current observed in the presence of blood glucose concentration (5 mM) was two times higher with yGOXpenag than with nGOXaspng. All our results indicated that yGOXpenag is a better candidate for industrial development of efficient bioelectrochemical devices used in physiological conditions.