Tunable white light emission from single‐phased Li2SrSiO4:Dy3+ phosphors by co‐doping with Eu3+

A series of single‐phase full‐color emitting Li₂Sr_1−x−ySiO₄:xDy³⁺,yEu³⁺ phosphors were synthesized by solid‐state reaction and characterized by X‐ray diffraction and photoluminescence analyses. The samples showed emission peaks at 488 nm (blue), 572 nm (yellow), 592 nm (orange) and 617 nm (red) under 393 nm excitation. The photoluminescence excitation spectra, comprising the Eu–O charge transfer band and 4f–4f transition bands of Dy³⁺ and Eu³⁺, range from 200 to 500 nm. The Commission Internationale de I'Eclairage chromaticity coordinates for Li₂Sr_0.98−xSiO₄:0.02Dy³⁺,xEu³⁺ phosphors were simulated. By manipulating Eu³⁺ and Dy³⁺ concentrations, the color points of Li₂Sr_1−x−ySiO₄:xDy³⁺,yEu³⁺ were tuned from the greenish‐white region to white light and eventually to reddish‐white region, demonstrating that a tunable white light can be obtained by Li₂Sr_1−x−ySiO₄:xDy³⁺,yEu³⁺ phosphors. Li₂Sr_0.98−xSiO₄:0.02Dy³⁺, xEu³⁺ can serve as a white‐light‐emitting phosphor for phosphor‐converted light‐emitting diode. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis and luminescent properties of novel BaGd2O4:Eu3+ scintillating phosphor

BaGd_2‐xO₄:xEu³⁺ and Ba_1‐yGd_1.79‐2yEu_0.21Na_3yO₄ phosphors were synthesized at 1300°C in air by conventional solid‐state reaction method. Phosphors were characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM), photoluminescence excitation (PLE) spectra, photoluminescence (PL) spectra and thermoluminescence (TL) spectra. Optimal PL intensity for BaGd_2‐xO₄:xEu³⁺ and Ba_1‐yGd_1.79‐2yEu_0.21Na_3yO₄ phosphors at 276 nm excitation were found to be x = 0.24 and y = 0.125, respectively. The PL intensity of Eu³⁺ emission could only be enhanced by 1.3 times with incorporation of Na⁺ into the BaGd₂O₄ host. Enhanced luminescence was attributed to the flux effect of Na⁺ ions. However, when BaGd₂O₄:Eu³⁺ phosphors were codoped with Na⁺ ions, the induced defects confirmed by TL spectra impaired the emission intensity of Eu³⁺ ions. Copyright © 2012 John Wiley & Sons, Ltd.     

Luminescence behavior of Li2Sr1‐3x/2EuxSiO4 red phosphors for LED applications

Red‐emitting Li₂Sr_1‐3x/2Eu_xSiO₄ 0≤x≤0.5) phosphors were synthesized at 900°C in air by a solid‐state reaction. The synthesized phosphors were characterized by X‐ray powder diffraction, photoluminescence (PL) excitation (PLE) and PL spectra. The results from the PLE spectra suggest that the strong 394 nm excitation peak associated with the ⁵L₆ state of Eu³⁺ ions is of significance for near ultraviolet pumped white light‐emitting diodes and solid‐state lighting. It is also noted that the position of the charge transfer state of Eu³⁺ ions shifts towards the higher energy side (blue shift) by increasing the content of Eu³⁺ ions. The predominant emissions of Eu³⁺ ions under 394 nm excitation are observed at 580, 593, 614, 656 and 708 nm, which are attributed to the ⁵D₀ → ⁷F_J (J = 0, 1, 2, 3 and 4), respectively. The PL results reveal that the optimal content of the red‐emitting Li₂Sr_1‐3x/2Eu_xSiO₄ phosphors is x = 0.475. Simulation of the white light excited by 394 nm near ultraviolet light has also been carried out for its potential white light‐emitting diode applications. Copyright © 2013 John Wiley & Sons, Ltd.     

Microwave‐assisted sintering synthesis of greenish‐yellow emitting Sr2SiO4:Eu2+ phosphors

Europium ion (Eu²⁺) doped Sr₂SiO₄ phosphors with greenish‐yellow emission were synthesized using microwave‐assisted sintering. The phase structure and photoluminescence (PL) properties of the obtained phosphor samples were investigated. The PL excitation spectra of the Sr₂SiO₄:Eu²⁺ phosphors exhibited a broad band in the range of 260 nm to 485 nm with a maximum at 361 nm attributed to the 5f‐4d allowed transition of the Eu²⁺ ions. Under an excitation at 361 nm, the Sr₂SiO₄:Eu²⁺ phosphor exhibited a greenish‐yellow emission peak at 541 nm with an International‐Commission‐on‐Illumination (CIE) chromaticity of (0.3064, 0.4772). The results suggest that the microwave‐assisted sintering method is promising for the synthesis of phosphors owing to the decreased sintering time without the use of additional reductive agents.     

Eu3+–Eu2+‐doped xAl2O3–ySiO2 and xAl2O3–zMgO composites phosphors

In this paper, the Eu³⁺–Eu²⁺ (4%, molar ratio)‐doped xAl₂O₃–ySiO₂ (x = 0–2.5, y = 1–5) and xAl₂O₃–zMgO (x = 0–1.5, z = 0–3) composites phosphors with different Al₂O₃ to SiO₂ (A/S) and Al₂O₃ to MgO (A/M) ratios were prepared using a high‐temperature solid‐state reaction under air atmosphere. The effects of the A/S and A/M on luminescence properties, crystal structure, electron spin resonance, and Commission Internationale de l’Eclairage chromaticity coordinates of the samples were systematically analyzed. These results indicated that the different A/S and A/M ratios in the matrix effectively affected the crystal phase, degrees of self‐reduction of Eu³⁺, and led the relative emission intensity of Eu²⁺/Eu³⁺ to change and adjust.     

Optical properties of Eu2+/Eu3+ mixed valence phosphor Ca2SiO2F2:Eu2+/Eu3+

The Eu²⁺/Eu³⁺ mixed valence phosphor Ca₂SiO₂F₂:Eu²⁺/Eu³⁺ was prepared using a solid‐state reaction synthesis method in a CO atmosphere, and the optical properties were investigated. The spectroscopic properties revealed that Ca²⁺ ions were occupied by both Eu²⁺ and Eu³⁺ ions in Ca₂SiO₂F₂, and both ions were able to generate their characteristic emissions. A broad 5d → 4f Eu²⁺ band at ~470 nm and narrow 4f → 4f Eu³⁺ peaks upon excitation with n‐UV light were observed. The ratio between Eu²⁺ and Eu³⁺ emissions changed regularly, and the relative intensity of the red component from Eu³⁺ became systematically stronger with increasing overall Eu content. As a result, the emission color of these phosphors can be tunable from blue to pink under n‐UV light excitation.     

Luminescent properties of Ca3SiO4Cl2 co‐doped with Ce3+ and Eu2+ for near‐ultraviolet light‐emitting diodes

Ca₃SiO₄Cl₂ co‐doped with Ce³⁺,Eu²⁺ was prepared by high temperature reaction. The structure, luminescent properties and the energy transfer process of Ca₃SiO₄Cl₂: Ce³⁺,Eu²⁺ were investigated. Eu²⁺ ions can give enhanced green emission through Ce³⁺ → Eu²⁺ energy transfer in these phosphors. The green phosphor Ca_2.9775SiO₄Cl₂:0.0045Ce³⁺,0.018Eu²⁺ showed intense green emission with broader excitation in the near‐ultraviolet light range. A green light‐emitting diode (LED) based on this phosphor was made, and bright green light from this green LED could be observed by the naked eye under 20 mA current excitation. Hence it is considered to be a good candidate for the green component of a three‐band white LED. Copyright © 2015 John Wiley & Sons, Ltd.     

Insights into the discrepant luminescence for BaSiO3:Eu2+ phosphors prepared by solid‐state reaction and precipitation reaction methods

Two synthesis routes, solid‐state reaction and precipitation reaction, were employed to prepare BaSiO₃:Eu²⁺ phosphors in this study. Discrepancies in the luminescence green emission at 505 nm for the solid‐state reaction method sample and in the yellow emission at 570 nm for the sample prepared by the precipitation reaction method, were observed respectively. A detail investigation about the discrepant luminescence of BaSiO₃:Eu²⁺ phosphors was performed by evaluation of X‐ray diffraction (XRD), photoluminescence (PL)/photoluminescence excitation (PLE), decay time and thermal quenching properties. The results showed that the yellow emission was generated from the BaSiO₃:Eu²⁺ phosphor, while the green emission was ascribed to a small amount of Ba₂SiO₄:Eu²⁺ compound that was present in the solid‐state reaction sample. This work clarifies the luminescence properties of Eu²⁺ ions in BaSiO₃ and Ba₂SiO₄ hosts.     

The luminescent properties and crystal structure of Sr(1.5‐x)‐(1.5y)Mg0.5SiO4:xEu2+,yCe3+ blue phosphor synthesized by co‐precipitation method

In order to improve the luminescent performance of silicate blue phosphors, Sr_{(1.5‐x)‐(1.5y)}Mg_0.5SiO₄:xEu²⁺,yCe³⁺ phosphors were synthesized using one‐step calcination of a precursor prepared by chemical co‐precipitation. The crystal structure and luminescent properties of the phosphors were analyzed using X‐ray diffraction and fluorescence spectrophotometry, respectively. Because the activated ions (Eu²⁺) can occupy two different types of sites (Sr₁ and Sr₂), the emission spectrum of Eu²⁺ excited at 350 nm contains two single bands (EM₁ and EM₂) in the wavelength range 400–550 nm, centered at 463 nm, and the emission intensity first increases and then decreases with increasing concentrations of Eu²⁺ ions. Co‐doping of Ce³⁺ ions can greatly enhance the emission intensity of Eu²⁺ by transferring its excitation energy to Eu²⁺. Because of concentration quenching, a higher substitution concentration of Ce³⁺ can lead to a decrease in the intensity. Meanwhile, the quantum efficiency of the phosphor is improved after doping with Ce³⁺, and a blue shift phenomenon is observed in the CIE chromaticity diagram. The results indicate that Sr_{(1.5‐x)‐(1.5y)}Mg_0.5SiO₄:xEu²⁺,yCe³⁺ can be used as a potential new blue phosphor for white light‐emitting diodes.     

Luminescence enhancement of (Sr1–xMx)2SiO4:Eu2+ phosphors with M (Ca2+/Zn2+) partial substitution for white light‐emitting diodes

Eu²⁺‐doped Sr₂SiO₄ phosphor with Ca²⁺/Zn²⁺ substitution, (Sr_1–xM_x)₂SiO₄:Eu²⁺ (M = Ca, Zn), was prepared using a high‐temperature solid‐state reaction method. The structure and luminescence properties of Ca²⁺/Zn²⁺ partially substituted Sr₂SiO₄:Eu²⁺ phosphors were investigated in detail. With Ca²⁺ or Zn²⁺ added to the silicate host, the crystal phase could be transformed between the α‐form and the β‐form of the Sr₂SiO₄ structure. Under UV excitation at 367 nm, all samples exhibit a broad band emission from 420 to 680 nm due to the 4f⁶5d¹ → 4f⁷ transition of Eu²⁺ ions. The broad emission band consists of two peaks at 482 and 547 nm, which correspond to Eu²⁺ ions occupying the ten‐fold oxygen‐coordinated Sr.(I) site and the nine‐fold oxygen‐coordinated Sr.(II) site, respectively. The luminescence properties, including the intensity and lifetime of Sr₂SiO₄:Eu²⁺ phosphors, improved remarkably on Ca²⁺/Zn²⁺ addition, and promote its application in white light‐emitting diodes. Copyright © 2016 John Wiley & Sons, Ltd.     

Effect of CaCN2 on the preparation of CaAlSiN3:Eu2+ phosphors

Highly efficient red‐emitting phosphors, CaAlSiN₃:Eu²⁺, were successfully prepared by the solid‐state method using calcium cyanide (CaCN₂) as the single calcium source. The influences of crystallization temperature, crystallization time, calcination mode and compounds ratio on the photoluminescent properties were investigated. The CaAlSiN₃:Eu²⁺ phosphors were obtained with 1 mol% CaCN₂ by a two‐step calcination procedure at 900°C for 2 h and subsequently at 1600°C for 8 h. The CaAlSiN₃:Eu²⁺ phosphors showed the strongest luminescent intensity at 660 nm when excited by 468 nm. With an increase in crystallization time, the maximum wavelength of the emission was shifted from 644 nm to 660 nm.     

Luminescent properties of novel red‐emitting M7Sn(PO4)6:Eu3+ (M = Sr,Ba) for light‐emitting diodes

Novel red‐emitting phosphors, Eu³⁺‐activated M₇Sn(PO₄)₆ (M = Sr, Ba), were synthesized at 1200°C by conventional solid‐state reaction method. The luminescent properties of M₇Sn(PO₄)₆:Eu³⁺ (M = Sr, Ba) phosphors were investigated, and the critical concentration of the activator (Eu³⁺) concentration were found to be 0.175 mol and 0.21 mol per formula unit for Sr_7‐xSn(PO₄)₆:xEu³⁺ and Ba_7‐xSn(PO₄)₆:xEu³⁺, respectively. These phosphors presented red luminescence under the excitation of 395 or 465 nm, perfectly matching with the emissions wavelength of near‐ultraviolet (UV) light‐emitting diodes (LEDs) and InGaN blue LED.     

Tunable emission from LiBaBO3:Eu3+;Bi3+ phosphor for solid‐state lighting

Europium (Eu³⁺) and bismuth (Bi³⁺) co‐activated LiBaBO₃ powder phosphors were synthesized by a solid‐state reaction and the structure, particle morphology, optical and photoluminescent properties were investigated. X‐Ray diffraction patterns of the LiBaBO₃ phosphors crystallized in a pure monoclinic phase, i.e. there were no secondary phases due to either incidental impurities or undecomposed starting materials. Scanning electron microscopy images showed that the powders were made up of fluffy needle‐like particles that were randomly aligned. The band‐gap of the LiBaBO₃ host was estimated to be 3.33 eV from the UV/vis absorption data. Blue emission was observed from the LiBaBO₃ host, which is ascribed to self‐activation of the host matrix. In addition, greenish‐blue (493 nm) and red (613 nm) emissions were observed from europium‐doped samples and were attributed to the emissions of Eu²⁺ and Eu³⁺, respectively. Furthermore, after codoping with Bi³⁺, the emission intensity of Eu³⁺ located at 613 nm was significantly enhanced. From the Commission Internationale de I′Eclairage (CIE) color coordinates, white emission was observed from LiBa_1–xBO₃:xEu³⁺ (x = 0.020 and 0.025) phosphor powders with color coordinates of x = 0.368, y = 0.378 and x = 0.376, y = 0.366, respectively.     

Cation‐tunable blue phosphor Ca2PO4Cl:Eu2+: enhancive emission and site occupancy

A series of blue phosphors Ca_1.98–xM_xPO₄Cl:0.02Eu²⁺ (M = Mg and Sr) with different values of x were synthesized using a high‐temperature solid‐state reaction. X‐Ray diffraction and photoluminescence measurements were used to study the phase structure and luminescence properties. Ca₂PO₄Cl:0.02Eu²⁺ exhibits a tunable emission intensity and color due to the incorporation of Sr²⁺ or Mg²⁺. The incorporation of Sr²⁺ reduces the luminescence intensity and results in a slight red shift in the emission band. The incorporation of Mg²⁺ results in enhanced emission and a clear blue shift in the emission band along with a tunable chromatic coordination. Under excitation at λ = 334 nm, the emission intensity of the Mg²⁺‐doped Ca₂PO₄Cl:0.02Eu²⁺ is found to be 250% that of Ca₂PO₄Cl:0.02Eu²⁺. The luminescence behaviors of the as‐synthesized phosphors are discussed according to the host crystal structure and site occupancy of Eu²⁺. The results indicate that Mg²⁺‐doped Ca₂PO₄Cl:Eu²⁺ is more applicable as a near‐UV‐convertible blue phosphor for white light‐emitting diodes. Copyright © 2015 John Wiley & Sons, Ltd.     

Luminescence in Ba2Sr2Al2O7:RE (RE = Tb3+,Eu3+ and Dy3+) novel aluminate phosphors

The luminescence of novel rare earth ( Tb ^{3 +} , Eu ^{3 +} and Dy ^{3 +} )‐activated Ba ₂ Sr ₂ Al ₂ O ₇ phosphors for solid‐state lighting is presented. The aluminate phosphors were synthesized using a one‐step combustion method. X‐Ray diffraction, scanning electron microscopy and photoluminescence characterizations were performed to understand the mechanism of excitation and the corresponding emission in the as‐prepared phosphor, as characterized the phase purity and microstructure. Improvements in the luminescence properties of the phosphors with rare earth concentration were observed. The phosphor hue could be tuned from blue, green and red by proper selection of rare earth ions in typical concentrations. Effective absorption in the near‐ultraviolet region was observed, which makes the phosphor a potential candidate for ultraviolet light‐emitting diodes. Copyright © 2016 John Wiley & Sons, Ltd.     

Eu3+‐activated Y2MoO6: a narrow band red‐emitting phosphor with strong near‐UV absorption

Near‐UV excited narrow line red‐emitting phosphors, Eu³⁺‐activated Y₂MoO₆ systems, were synthesized using a simple molten salt reaction. The structure and photoluminescence characteristics were investigated using X‐ray powder diffraction, UV–Vis absorption and fluorescent spectrophotometry. The excitation spectra show strong broad‐band absorptions in the near‐UV to blue light regions which match the radiation of near‐UV light‐emitting diode chips well. Under excitation of either near‐UV or blue light, intense red emission with a main peak of 611 nm is observed, ascribed to the ⁵D₀–⁷F₂ transition of Eu³⁺ ions; the optimal doping concentration is 20 mol%. The chromaticity coordinates (x = 0.65, y = 0.34) of the as‐obtained phosphor are very close to the National Television Standard Committee standard values (x = 0.67, y = 0.33). All these characteristics suggest that this material is a promising red‐emitting phosphor candidate for white‐LEDs based on near‐UV LED chips. Copyright © 2012 John Wiley & Sons, Ltd.     

Persistent luminescence of CaMgSi2O6:Eu2+,Dy3+ and CaMgSi2O6:Eu2+,Ce3+ phosphors prepared using the solid‐state reaction method

CaMgSi₂O₆:Eu²⁺,Dy³⁺ and CaMgSi₂O₆:Eu²⁺,Ce³⁺ phosphors were synthesized using the solid‐state reaction method. X‐Ray diffraction (XRD) and photoluminescence (PL) analyses were used to characterize the phosphors. The XRD results revealed that the synthesized CaMgSi₂O₆:Eu²⁺,Dy³⁺ and CaMgSi₂O₆:Eu²⁺,Ce³⁺ phosphors were crystalline and are assigned to the monoclinic structure with a space group C2/c. The calculated crystal sizes of CaMgSi₂O₆:Eu²⁺,Dy³⁺ and CaMgSi₂O₆:Eu²⁺,Ce³⁺ phosphors with a main (221) diffraction peak were 44.87 and 53.51 nm, respectively. Energy‐dispersive X‐ray spectroscopy (EDX) confirmed the proper preparation of the sample. The PL emission spectra of CaMgSi₂O₆:Eu²⁺,Dy³⁺ and CaMgSi₂O₆:Eu²⁺,Ce³⁺ phosphors have a broad band peak at 444.5 and 466 nm, respectively, which is due to electronic transition from 4f⁶5d¹ to 4f⁷. The afterglow results indicate that the CaMgSi₂O₆:Eu²⁺,Dy³⁺ phosphor has better persistence luminescence than the CaMgSi₂O₆:Eu²⁺,Ce³⁺ phosphor. Copyright © 2015 John Wiley & Sons, Ltd.     

Effect of replacement of Ca by Zn on the structure and optical property of CaTiO3:Eu3+ red phosphor prepared by sol‐gel method

Eu³⁺‐doped calcium titanate red phosphors, Ca_1‐xZn_xTiO₃:Eu³⁺, were prepared by the sol‐gel method. The structure of prepared Ca_1‐xZn_xTiO₃:Eu³⁺ phosphors were investigated by X‐ray diffraction and infrared spectra. Due to the ⁵D₀ → ⁷F_1–3 electron transitions of Eu³⁺ ions, photoluminescence spectra showed a red emission at about 619 nm under excitation of 397 nm and 465 nm, respectively. When zinc was added to the host, the luminescent intensity of Ca_1‐xZn_xTiO₃:Eu³⁺ was markedly improved several fold compared with that of CaTiO₃:Eu³⁺. Ca_0.9Zn_0.1TiO₃:Eu³⁺ also had higher luminescence intensity than the commercially available Y₂O₃:Eu³⁺ phosphors under UV light excitation. Copyright © 2014 John Wiley & Sons, Ltd.     

Impact of temperature on Na2Sr(PO4)F:Eu3+ phosphor

In this article, we report the synthesis of Na₂Sr_1‐x(PO₄)F:Eu_x phosphor via a combustion method. The influence of different annealing temperatures on the photoluminescence properties was investigated. The phosphor was excited at both 254 and 393 nm. Na₂Sr_1‐x(PO₄)F:Eu_x³⁺ phosphors emit strong orange and red color at 593 and 612 nm, respectively, under both excitation wavelengths. Na₂Sr_1‐x(PO₄)F:Eu_x³⁺ phosphors annealed at 1050°C showed stronger emission intensity compared with 600, 900 and 1200°C. Moreover, Na₂Sr_1‐x(PO₄)F:Eu_x³⁺ phosphor was found to be more intense when compared with commercial Y₂O₃:Eu³⁺ phosphor. Copyright © 2013 John Wiley & Sons, Ltd.     

A promising RVO4:Eu3+,Li+@SiO2 (R = Gd,Y and Gd/Y) red‐emitting phosphor with improved luminescence (cd/m2) and colour purity for optical display applications

Red emission intensity was optimized in three stages, by investigating the effects of: (i) host composition (Gd, Y and Gd/Y), (ii) codoping Li⁺ as a sensitizer and, finally, (iii) with a SiO₂ shell coating as a protecting layer. Lanthanide vanadate powder phosphors were synthesized using a modified colloidal precipitation technique. The effects of SiO₂ coating on phosphor particles were characterized using scanning electron microscopy (SEM)‐EDAX, transmission electron microscopy (TEM), Fourier transform infrared (FTIR) and photoluminescence (PL) measurements. An improvement in the PL intensity on Li codoping was due to improved crystallinity, which led to higher oscillating strengths for the optical transitions, and also a lowering of the inversion symmetry of Eu³⁺ ions. Red emission intensity due to ⁵D₀ → ⁵D₂ transition of the phosphor Y_0.94VO₄:Eu³⁺_0.05,Li⁺_0.01 was enhanced by 22.28% compared with Y_0.95VO₄:Eu³⁺_0.05, and was further improved by 58.73% with SiO₂ coating. The luminescence intensity (I) and colour coordinates (x, y) of the optimized phosphor Y_0.94VO₄:Eu³⁺_0.05,Li⁺_0.01@SiO₂, where I = 13.07 cd/m² and (x = 0.6721, y = 0.3240), were compared with values for a commercial red phosphor (Y₂O₂S:Eu³⁺), where I = 27 cd/m² and (x = 0.6522, y = 0.3437). The measured colour coordinates are superior to those of the commercial red phosphor, and moreover, match well with standard NTSC values (x = 0.67, y = 0.33). Copyright © 2015 John Wiley & Sons, Ltd.