Substitution mapping of dth1.1, a flowering-time quantitative trait locus (QTL) associated with transgressive variation in rice, reveals multiple sub-QTL

A quantitative trait locus (QTL), dth1.1, was associated with transgressive variation for days to heading in an advanced backcross population derived from the Oryza sativa variety Jefferson and an accession of the wild rice relative Oryza rufipogon. A series of near-isogenic lines (NILs) containing different O. rufipogon introgressions across the target region were constructed to dissect dth1.1 using substitution mapping. In contrast to the late-flowering O. rufipogon parent, O. rufipogon alleles in the substitution lines caused early flowering under both short- and long-day lengths and provided evidence for at least two distinct sub-QTL: dth1.1a and dth1.1b. Potential candidate genes underlying these sub-QTL include genes with sequence similarity to Arabidopsis GI, FT, SOC1, and EMF1, and Pharbitis nil PNZIP. Evidence from families with nontarget O. rufipogon introgressions in combination with dth1.1 alleles also detected an early flowering QTL on chromosome 4 and a late-flowering QTL on chromosome 6 and provided evidence for additional sub-QTL in the dth1.1 region. The availability of a series of near-isogenic lines with alleles introgressed from a wild relative of rice provides an opportunity to better understand the molecular basis of transgressive variation in a quantitative trait.     

云南元江普通野生稻株高和抽穗期QTL定位研究

以云南元江普通野生稻为供体亲本,在特青的遗传背景下构建了一套BC3高代回交群体。利用117个SSR标记分析383个BC3F2株系的基因型,采用单标记分析法对控制元江普野株高和抽穗期的QTL进行分析。在北京和合肥两个地点试验结果表明,控制株高的QTL分布在第1染色体上,在RM104附近有一个QTL,与sd-1位置相当,其对表现型变异的贡献率在两个地点分别为27％和28％,其加性效应值分别为26．24cm和26．28cm,来自野生稻的等位基因显著提高回交群体的株高;在第1、3、7、8、11染色体共检测到6个控制抽穗期QTL,其中第8染色体RM25附近控制抽穗期的QTL在两个地点的贡献率分别为13％和15％,加性效应值为4．60d和3．65d,来自野生稻的等位基因使回交群体抽穗期延迟。     

Mapping quantitative trait loci for yield,yield components and morphological traits in an advanced backcross population between <Emphasis Type="Italic">Oryza rufipogon</Emphasis> and the <Emphasis Type="Italic">Oryza sativa</Emphasis> cultivar Jefferson

An advanced backcross population between an accession of Oryza rufipogon (IRGC 105491) and the U.S. cultivar Jefferson (Oryza sativa ssp. japonica) was developed to identify quantitative trait loci (QTLs) for yield, yield components and morphological traits. The genetic linkage map generated for this population consisted of 153 SSR and RFLP markers with an average interval size of 10.3 cM. Thirteen traits were examined, nine of which were measured in multiple environments. Seventy-six QTLs above an experiment-wise significance threshold of P<0.01 (corresponding to an interval mapping LOD>3.6 or a composite interval mapping LOD>3.9) were identified. For the traits measured in multiple environments, 47% of the QTLs were detected in at least two environments. The O. rufipogon allele was favorable for 53% of the yield and yield component QTLs, including loci for yield, grains per panicle, panicle length, and grain weight. Morphological traits related to the domestication process and/or weedy characteristics, including plant height, shattering, tiller type and awns, were found clustered on chromosomes 1 and 4. Comparisons to previous studies involving wild x cultivated crosses revealed O. rufipogon alleles with stable effects in multiple genetic backgrounds and environments, several of which have not been detected in studies between Oryza sativa cultivars, indicating potentially novel alleles from O. rufipogon. Some O. rufipogon-derived QTLs, however, were in similar regions as previously reported QTLs from Oryza sativa cultivars, providing evidence for conservation of these QTLs across the Oryza genus. In addition, several QTLs for grain weight, plant height, and flowering time were localized to putative homeologous regions in maize where QTLs for these traits have been previously reported, supporting the hypothesis of functional conservation of QTLs across the grasses.     

Identification of trait-improving quantitative trait loci alleles from a wild rice relative,Oryza rufipogon.

Wild species are valued as a unique source of genetic variation, but they have rarely been used for the genetic improvement of quantitative traits. To identify trait-improving quantitative trait loci (QTL) alleles from exotic species, an accession of Oryza rufipogon, a relative of cultivated rice, was chosen on the basis of a genetic diversity study. An interspecific BC2 testcross population (V20A/O. rufipogon//V20B///V20B////Ce64) consisting of 300 families was evaluated for 12 agronomically important quantitative traits. The O. rufipogon accession was phenotypically inferior for all 12 traits. However, transgressive segregants that outperformed the original elite hybrid variety, V20A/Ce64, were observed for all traits examined. A set of 122 RFLP and microsatellite markers was used to identify QTL. A total of 68 significant QTL were identified, and of these, 35 (51%) had beneficial alleles derived from the phenotypically inferior O. rufipogon parent. Nineteen (54%) of these beneficial QTL alleles were free of deleterious effects on other characters. O. rufipogon alleles at two QTL on chromosomes 1 and 2 were associated with an 18 and 17% increase in grain yield per plant, respectively, without delaying maturity or increasing plant height. This discovery suggests that the innovative use of molecular maps and markers can alter the way geneticists utilize wild and exotic germplasm.     

Levels and patterns of nucleotide variation in domestication QTL regions on rice chromosome 3 suggest lineage-specific selection

Oryza sativa or Asian cultivated rice is one of the major cereal grass species domesticated for human food use during the Neolithic. Domestication of this species from the wild grass Oryza rufipogon was accompanied by changes in several traits, including seed shattering, percent seed set, tillering, grain weight, and flowering time. Quantitative trait locus (QTL) mapping has identified three genomic regions in chromosome 3 that appear to be associated with these traits. We would like to study whether these regions show signatures of selection and whether the same genetic basis underlies the domestication of different rice varieties. Fragments of 88 genes spanning these three genomic regions were sequenced from multiple accessions of two major varietal groups in O. sativa--indica and tropical japonica--as well as the ancestral wild rice species O. rufipogon. In tropical japonica, the levels of nucleotide variation in these three QTL regions are significantly lower compared to genome-wide levels, and coalescent simulations based on a complex demographic model of rice domestication indicate that these patterns are consistent with selection. In contrast, there is no significant reduction in nucleotide diversity in the homologous regions in indica rice. These results suggest that there are differences in the genetic and selective basis for domestication between these two Asian rice varietal groups.     

GENETIC ARCHITECTURE FOR THE ADAPTIVE ORIGIN OF ANNUAL WILD RICE, ORYZA NIVARA

The wild progenitors of cultivated rice, Oryza nivara and Oryza rufipogon , provide an experimental system for characterizing the genetic basis of adaptation. The evolution of annual O. nivara from a perennial ancestor resembling its sister species, O. rufipogon , was associated with an ecological shift from persistently wet to seasonally dry habitats. Here we report a quantitative trait locus (QTL) analysis of phenotypic differentiation in life history, mating system, and flowering time between O. nivara and O. rufipogon . The exponential distribution of effect sizes of QTL fits the prediction of a recently proposed population genetic model of adaptation. More than 80% of QTL alleles of O. nivara acted in the same direction of phenotypic evolution, suggesting that they were fixed under directional selection. The loss of photoperiod sensitivity, which might be essential to the survival of the ancestral populations of O. nivara in the new environment, was controlled by QTL of relatively large effect. Mating system evolution from cross- to self-fertilization through the modification of panicle and floral morphology was controlled by QTL of small-to-moderate effect. The lack of segregation of the recessive annual habit in the F₂ mapping populations suggested that the evolution of annual from perennial life form had a complex genetic basis. The study captured the genetic architecture for the adaptive origin of O. nivara and provides a foundation for rigorous experimental tests of population genetic theories of adaptation.     

Advanced Intercross Lines, an Experimental Population for Fine Genetic Mapping

An advanced intercrossed line (AIL) is an experimental population that can provide more accurate estimates of quantitative trait loci (QTL) map location than conventional mapping populations. An AIL is produced by randomly and sequentially intercrossing a population that initially originated from a cross between two inbred lines or some variant thereof. This provides increasing probability of recombination between any two loci. Consequently, the genetic length of the entire genome is stretched, providing increased mapping resolution. In this way, for example, with the same population size and QTL effect, a 95% confidence interval of QTL map location of 20 cM in the F(2) is reduced fivefold after eight additional random mating generations (F(10)). Simulation results showed that to obtain the anticipated reduction in the confidence interval, breeding population size of the AIL in all generations should comprise an effective number of >/=100 individuals. It is proposed that AILs derived from crosses between known inbred lines may be a useful resource for fine genetic mapping.     

Molecular detection of genomic regions associated with grain yield and yield-related components in an elite bread wheat cross evaluated under irrigated and rainfed conditions

Grain yield and grain weight of wheat are often decreased by water-limitation in the north-eastern cropping belt of Australia. Based on knowledge that CIMMYT lines are well-adapted in this region, a recombinant inbred line (RIL) population between two elite CIMMYT bread wheats (Seri M82 and Babax) was evaluated under water-limited environments. Fourteen productivity traits were evaluated in 192 progeny in up to eight trials. For three aggregations of the environments (all, high yield or low yield), multiple quantitative trait loci (QTL) were detected, each explaining <15% of variation. Co-location of multiple trait QTL was greatest on linkage groups 1B-a, 1D-b, 4A-a, 4D-a, 6A-a, 6B-a, 7A-a and an unassigned linkage group. Two putative QTL (LOD > 3) from Seri (6D-b and UA-d) increased grain yield and co-located with a suggestive (2 < LOD < 3) and a putative QTL for increased stem carbohydrate content (WSC), respectively; the latter QTL also co-located with a putative anthesis QTL for earlier flowering. Both QTL were detected only in high yield (>4t ha⁻¹) environments. A third increased grain yield QTL (7A-a) from Babax co-located with QTL for increased grain number. Six putative QTL increased grain weight and co-located with QTL for harvest index, grains per spike and spike number. Three putative QTL for increased grains per spike co-located with strong QTL for earlier flowering, increased grain weight and fewer spikes. A group of progeny that exceeded the mean grain yield and grain weight of commercial checks had an increased frequency of QTL for high WSC, large grain size, increased harvest index and greater height, but fewer stems, when compared to low yielding (20% less), low grain weight progeny. These findings were consistent with agronomic analyses of the germplasm and demonstrate that there should be opportunities to independently manipulate grain number and grain size which is typically difficult due to strong negative correlations.     

Association mapping of agronomic traits on chromosome 2A of wheat

Association mapping is a method to test the association between molecular markers and quantitative trait loci (QTL) based on linkage disequilibrium (LD). In this study, the collection of 108 wheat germplasm accessions form China were evaluated for their plant heights, spike length, spikelets per spike, grains per spike, thousand kernel weight and spikelets density in 3 years at three locations. And they were genotyped with 85 SSR markers and 40 EST-SSR markers. The population structure was inferred on the basis of unlinked 48 SSR markers and 40 EST-SSR markers. The extent of LD on chromosome 2A was 2.3 cM. Association of 37 SSR loci on chromosomes 2A with six agronomic traits was analysed with a mixed linear model. A total of 14 SSR loci were significantly associated with agronomic traits. Some of the associated markers were located in the QTL region detected in previous linkage mapping analysis. Our results demonstrated that association mapping can enhance QTL information and achieves higher resolution with short LD extent.     

Molecular mapping of quantitative trait loci for yield and yield components in spring wheat (Triticum aestivum L.)

An F1 derived doubled haploid (DH) population of 402 lines from the adapted spring wheat cross Superb (high yielding)/BW278 (low yielding) was developed to identify quantitative trait loci (QTL) associated with yield and yield components. A subset of the population (186 lines) was evaluated in replicated field trials in 2001 and 2002 at six locations in Manitoba and Saskatchewan, Canada. Agronomic parameters, grain yield and yield components including 1,000 grain weight, harvest index, average seed weight spike(-1), seed number spike(-1) and spikes number m(-2) were measured. A genetic map was constructed with 268 microsatellite marker loci and included two morphological genes, reduced plant height, Rht-B1b, and the presence/absence of awns, B1. Composite interval mapping was conducted to estimate the location and effect of QTL associated with the evaluated traits. A total of 53 QTL were identified on 12 chromosomes for the 9 evaluated traits with the coefficient of determination ranging from 0.03 to 0.21 of the total variation. The increase in yield and yield components ranged from 4.5 to 17.1% over the population mean. The five grain yield QTL were detected on chromosomes 1A, 2D, 3B, and 5A and showed a combined increase of 34.4%, over the population mean. The alleles from Superb were associated with increased yield for four of the five QTL. This study identified potential chromosome segments for use in marker-assisted selection to improve yield and yield components in spring wheat.     

Genetic mapping of the rice ionome in leaves and grain: identification of QTLs for 17 elements including arsenic, cadmium, iron and selenium

Research into the composition of cereal grains is motivated by increased interest in food quality. Here multi-element analysis is conducted on leaves and grain of the Bala x Azucena rice mapping population grown in the field. Quantitative trait loci (QTLs) for the concentration of 17 elements were detected, revealing 36 QTLs for leaves and 41 for grains. Epistasis was detected for most elements. There was very little correlation between leaf and grain element concentrations. For selenium, lead, phosphorus and magnesium QTLs were detected in the same location for both tissues. In general, there were no major QTL clusters, suggesting separate regulation of each element. QTLs for grain iron, zinc, molybdenum and selenium are potential targets for marker assisted selection to improve seed nutritional quality. An epistatic interaction for grain arsenic also looks promising to decrease the concentration of this carcinogenic element.     

Analysis of an intraspecific RIL population uncovers genomic segments harbouring multiple QTL for seed relevant traits in lentil (<Emphasis Type="Italic">Lens culinaris</Emphasis> L.)

Improving seed related traits remains key objective in lentil breeding. In recent years, genomic resources have shown great promise to accelerate crop improvement. However, limited genomic resources in lentil greatly restrict the use of genomics assisted breeding. The present investigation aims to build an intraspecific genetic linkage map and identify the QTL associated with important seed relevant traits using 94 recombinant inbreds (WA 8649090 × Precoz). A total of 288 polymorphic DNA markers including simple sequence repeat (SSR), inter simple sequence repeat (ISSR) and random amplified polymorphic DNA (RAPD) were assayed on mapping population. The resultant genetic linkage map comprised 220 loci spanning 604.2 cM of the lentil genome, with average inter-marker distance of 2.74 cM. QTL mapping in this RIL population uncovered a total of 18 QTL encompassing nine major and nine minor QTL. All major QTL were detected for seed related traits viz., seed diameter (SD), seed thickness (ST), seed weight (SW) and seed plumpness (SP) across two locations. A considerable proportion of the phenotypic variation (PV) was accounted to these QTL. For instance, one major QTL on LG5 controlling SW (QTL 15) explained 50% PV in one location, while the same QTL accounted for 34.18% PV in other location. Importantly, the genomic region containing multiple QTL for different seed traits was mapped to a 17-cM region on LG5. The genomic region harbouring QTL for multiple traits opens up exciting opportunities for genomics assisted improvement of lentil.     

Large‐scale GWAS in sorghum reveals common genetic control of grain size among cereals

Grain size is a key yield component of cereal crops and a major quality attribute. It is determined by a genotype’s genetic potential and its capacity to fill the grains. This study aims to dissect the genetic architecture of grain size in sorghum. An integrated genome‐wide association study (GWAS) was conducted using a diversity panel (n = 837) and a BC‐NAM population (n = 1421). To isolate genetic effects associated with genetic potential of grain size, rather than the genotype’s capacity to fill the grains, a treatment of removing half of the panicle was imposed during flowering. Extensive and highly heritable variation in grain size was observed in both populations in 5 field trials, and 81 grain size QTL were identified in subsequent GWAS. These QTL were enriched for orthologues of known grain size genes in rice and maize, and had significant overlap with SNPs associated with grain size in rice and maize, supporting common genetic control of this trait among cereals. Grain size genes with opposite effect on grain number were less likely to overlap with the grain size QTL from this study, indicating the treatment facilitated identification of genetic regions related to the genetic potential of grain size. These results enhance understanding of the genetic architecture of grain size in cereal, and pave the way for exploration of underlying molecular mechanisms and manipulation of this trait in breeding practices.     

The Power of QTL Mapping with RILs

QTL (quantitative trait loci) mapping is commonly used to identify genetic regions responsible to important phenotype variation. A common strategy of QTL mapping is to use recombinant inbred lines (RILs), which are usually established by several generations of inbreeding of an F1 population (usually up to F6 or F7 populations). As this inbreeding process involves a large amount of labor, we are particularly interested in the effect of the number of inbreeding generations on the power of QTL mapping; a part of the labor could be saved if a smaller number of inbreeding provides sufficient power. By using simulations, we investigated the performance of QTL mapping with recombinant inbred lines (RILs). As expected, we found that the power of F4 population could be almost comparable to that of F6 and F7 populations. A potential problem in using F4 population is that a large proportion of RILs are heterozygotes. We here introduced a new method to partly relax this problem. The performance of this method was verified by simulations with a wide range of parameters including the size of the segregation population, recombination rate, genome size and the density of markers. We found our method works better than the commonly used standard method especially when there are a number of heterozygous markers. Our results imply that in most cases, QTL mapping does not necessarily require RILs at F6 or F7 generations; rather, F4 (or even F3) populations would be almost as useful as F6 or F7 populations. Because the cost to establish a number of RILs for many generations is enormous, this finding will cause a reduction in the cost of QTL mapping, thereby accelerating gene mapping in many species.     

The efficiency of designs for fine-mapping of quantitative trait loci using combined linkage disequilibrium and linkage

In a simulation study, different designs were compared for efficiency of fine-mapping of QTL. The variance component method for fine-mapping of QTL was used to estimate QTL position and variance components. The design of many families with small size gave a higher mapping resolution than a design with few families of large size. However, the difference is small in half sib designs. The proportion of replicates with the QTL positioned within 3 cM of the true position is 0.71 in the best design, and 0.68 in the worst design applied to 128 animals with a phenotypic record and a QTL explaining 25% of the phenotypic variance. The design of two half sib families each of size 64 was further investigated for a hypothetical population with effective size of 1000 simulated for 6000 generations with a marker density of 0.25 cM and with marker mutation rate 4 × 10^-4 per generation. In mapping using bi-allelic markers, 42~55% of replicated simulations could position QTL within 0.75 cM of the true position whereas this was higher for multi allelic markers (48~76%). The accuracy was lowest (48%) when mutation age was 100 generations and increased to 68% and 76% for mutation ages of 200 and 500 generations, respectively, after which it was about 70% for mutation ages of 1000 generations and older. When effective size was linearly decreasing in the last 50 generations, the accuracy was decreased (56 to 70%). We show that half sib designs that have often been used for linkage mapping can have sufficient information for fine-mapping of QTL. It is suggested that the same design with the same animals for linkage mapping should be used for fine-mapping so gene mapping can be cost effective in livestock populations.     

Identification of a stable quantitative trait locus for percentage grains with white chalkiness in rice (Oryza sativa)

High chalkiness is a major problem in many rice-producing areas of the world, especially in hybrid rice (Oryza sativa L.) in China. We previously showed a major quantitative trait locus for the percentage of grains with white chalkiness (QTLqPGWC-8) in the interval G1149-R727 on chromosome 8 using a chromosome segment substitution line (CSSL). Here, we selected the line-CSSL50 harboring the QTLqPGWC-8 allele from the CSSLs derived from a cross between Asominori (as a recurrent parent) and IR24 (as a donor parent), which had higher percentage chalkiness, markedly different from that of Asominori. There were also significant differences in starch granules, appearance of amylose content (AAC) and milling qualities between Asominori and CSSL50, but not in grain size or thousand grain weight (TGW). The BC(4) F(2) and BC(4) F(3) populations from a cross between CSSL50 and Asominori were used for fine mapping of qPGWC-8. We narrowed down the location of this QTL to a 142 kb region between Indel markers 8G-7 and 8G-9. QTLqPGWC-8 accounted for 50.9% of the difference in PGWC between the parents. The markers tightly linked to qPGWC-8 should facilitate cloning of the gene underlying this QTL and will be of value for marker-assisted selection in breeding rice varieties with better grain quality.     

Cross-species bacterial artificial chromosome (BAC) library screening via overgo-based hybridization and BAC-contig mapping of a yield enhancement quantitative trait locus (QTL) yld1.1 in the Malaysian wild rice Oryza rufipogon

The construction of BAC-contig physical maps is an important step towards a partial or ultimate genome sequence analysis. Here, we describe our initial efforts to apply an overgo approach to screen a BAC library of the Malaysian wild rice species, Oryza rufipogon. Overgo design is based on repetitive element masking and sequence uniqueness, and uses short probes (approximately 40 bp), making this method highly efficient and specific. Pairs of 24-bp oligos that contain an 8-bp overlap were developed from the publicly available genomic sequences of the cultivated rice, O. sativa, to generate 20 overgo probes for a 1-Mb region that encompasses a yield enhancement QTL yld1.1 in O. rufipogon. The advantages of a high similarity in melting temperature, hybridization kinetics and specific activities of overgos further enabled a pooling strategy for library screening by filter hybridization. Two pools of ten overgos each were hybridized to high-density filters representing the O. rufipogon genomic BAC library. These screening tests succeeded in providing 69 PCR-verified positive hits from a total of 23,040 BAC clones of the entire O. rufipogon library. A minimal tilling path of clones was generated to contribute to a fully covered BAC-contig map of the targeted 1-Mb region. The developed protocol for overgo design based on O. sativa sequences as a comparative genomic framework, and the pooled overgo hybridization screening technique are suitable means for high-resolution physical mapping and the identification of BAC candidates for sequencing.     

Fine mapping of quantitative trait loci using linkage disequilibria with closely linked marker loci

A multimarker linkage disequilibrium mapping method was developed for the fine mapping of quantitative trait loci (QTL) using a dense marker map. The method compares the expected covariances between haplotype effects given a postulated QTL position to the covariances that are found in the data. The expected covariances between the haplotype effects are proportional to the probability that the QTL position is identical by descent (IBD) given the marker haplotype information, which is calculated using the genedropping method. Simulation results showed that a QTL was correctly positioned within a region of 3, 1.5, or 0.75 cM in 70, 62, and 68%, respectively, of the replicates using markers spaced at intervals of 1, 0.5, and 0.25 cM, respectively. These results were rather insensitive to the number of generations since the QTL occurred and to the effective population size, except that 10 generations yielded rather poor estimates of the QTL position. The position estimates of this multimarker disequilibrium mapping method were more accurate than those from a single marker transmission disequilibrium test. A general approach for identifying QTL is suggested, where several stages of disequilibrium mapping are used with increasingly dense marker spacing.     

野生稻高产QTL高效表达的光合生理基础

以携带野生稻高产QTL的晚稻新恢复系远恢611所配部分强优势组合为材料,对其部分光合生理指标进行测定的结果表明,远恢611系列组合杂种优势强,穗大粒多,库容量大,具有超高产潜力;后期上面3片功能叶宽大、直立、叶面积大,与茎秆夹角小,不披垂;比叶重大而稳定,不早衰;剑叶净光合速率高,库很大且源较足是远恢611系列组合高产的主要生理原因;也可能是野生稻高产QTL高效表达的重要生理基础。     

QTL analysis for grain quality traits in 2 BC2F2 populations derived from crosses between Oryza sativa cv Swarna and 2 accessions of O. nivara

The appearance and cooking quality of rice determine its acceptability and price to a large extent. Quantitative trait loci (QTLs) for 12 grain quality traits were mapped in 2 mapping populations derived from Oryza sativa cv Swarna × O. nivara. The BC(2)F(2) population of the cross Swarna × O. nivara IRGC81848 (population 1) was evaluated during 2005 and that from Swarna × O. nivara IRGC81832 (population 2) was evaluated during 2006. Linkage maps were constructed using 100 simple sequence repeat (SSR) markers in population 1 and 75 SSR markers in population 2. In all, 21 QTLs were identified in population 1 (43% from O. nivara) and 37 in population 2 (38% QTLs from O. nivara). The location of O. nivara-derived QTLs mp1.2 for milling percent, kw6.1 for kernel width, and klac12.1 for kernel length after cooking coincided in the 2 populations and appear to be useful for Marker Assisted Selection (MAS). Four QTLs for milling percent, 1 QTL each for amylose content, water uptake, elongation ratio, 2 QTLs for kernel width, and 3 QTLs for gel consistency, each explained more than 20% phenotypic variance. Three QTL clusters for grain quality traits were close to the genes/QTLs for shattering and seed dormancy. QTLs for 4 quality traits were associated with 5 of the 7 major yield QTLs reported in the same 2 mapping populations. Useful introgression lines have been developed for several agronomic traits. It emerges that 40% O. nivara alleles were trait enhancing in both populations, and QTLs for grain quality overlapped with yield meta-QTLs and QTLs for dormancy and seed shattering.