Simple sequence repeat genetic linkage maps of A-genome diploid cotton (Gossypium arboreum)

This study introduces the construction of the first intraspacific genetic linkage map of the A-genome diploid cotton with newly developed simple sequence repeat (SSR) markers using 189 F2 plants derived from the cross of two Asiatic parents were detected using 6 092 pairs of SSR primers. Two-hundred and sixty-eight pairs of SSR pdmers with better polymorphisms were picked out to analyze the F2 population. In total, 320 polymorphic bands were generated and used to construct a linkage map with JoinMap3.0. Two-hundred and sixty-seven loci, Including three phenotypic traits were mapped at a logarithms of odds ratio (LOD) ≥ 3.0 on 13 linkage groups. The total length of the map was 2 508.71 cM, and the average distance between adjacent markers was 9.40 cM. Chromosome assignments were according to the association of linkages with our backbone tetraploid specific map using the 89 similar SSR loci. Comparisons among the 13 suites of orthologous linkage groups revealed that the A-genome chromosomes are largely collinear with the At and Dt sub-genome chromosomes. Chromosomes associated with inversions suggested that allopolyploidization was accompanied by homologous chromosomal rearrangement. The inter-chromosomal duplicated loci supply molecular evidence that the A-genome diploid Asiatic cotton is paleopolyploid.     

Linkage Map Construction and Quantitative Trait Loci Analysis for Bolting Based on a Double Haploid Population of Brassica rapa

Early bolting of Chinese cabbage （Brassica rapa L.） during spring cultivation often has detrimental effects on the yield and quality of the harvested products. Breeding late bolting varieties is a major objective of Chinese cabbage breeding programs. In order to analyze the genetic basis of bolting traits, a genetic map of B. rapa was constructed based on amplified fragment-length poiymorphism （AFLP）, sequence-related amplified poiymorphism （SRAP）, simple sequence repeat （SSR）, random amplification of polymorphic DNA （RAPD）, and isozyme markers. Marker analysis was carried out on 81 double haploid （DH） lines obtained by microspore culture from F1 progeny of two homozygous parents： B. rapa L. ssp. pekinensis （BY） （an extra-early bolting Chinese cabbage line） and B. rapa L. ssp. rapifera （MM） （an extra-late bolting European turnip line）. A total of 326 markers including 130 AFLPs, 123 SRAPs, 16 SSRs, 43 RAPDs and 14 isozymes were used to construct a linkage map with 10 linkage groups covering 882 cM with an average distance of 2.71 cM between loci. The bolting trait of each DH line was evaluated by the bolting index under controlled conditions. Quantitative trait loci （QTL） analysis was conducted using multiple QTL model mapping with MapQTL5.0 software. Eight QTLs controlling bolting resistance were identified. These QTLs, accounting for 14.1% to 25.2% of the phenotypic variation with positive additive effects, were distributed into three linkage groups. These results provide useful information for molecular marker-assisted selection of late bolting traits in Chinese cabbage breeding programs.     

Molecular Tagging and Mapping of Quantitative Trait Loci for Lint Percentage and Morphological Marker Genes in Upland Cotton

Using 219 F2 Individuals developed by crossing the genetic standard line TM-1 and the multiple dominant marker line T586 In Gossyplum hirsutum L., a genetic linkage map with 19 linkage groups was constructed based on simple sequence repeat （SSR） markers. Compared with our tetraploid backboned molecular genetic map from a （TM-1xHal 7124）xTM-1 BC1 population, 17 of the 19 I｜nkage groups were combined and anchored to 12 chromosomes （sub-genomes）. Of these groups, four morphological marker genes In T586 had been mapped Into the molecular linkage map. Meanwhile, three quantitative trait loci for lint percentage were tagged and mapped separately on the A03 linkage group and chromosome 6.     

Genetic Mapping of Laminaria japonica and L. Iongissima Using Amplified Fragment Length Polymorphism Markers in a ＂Two-Way Pseudo- Testcross＂ Strategy

With a ＂two-way pseudo-testcross＂ mapping strategy, we applied the amplified fragment length polymorphism （AFLP） markers to construct two moderate density genetic linkage maps for Laminaria. The linkage maps were generated from the 60 progenies of the F1 cross family （Laminaria iongissima Aresch. × L. Japonica Miyabe） with twenty pairs of primer combinations. Of the 333 polymorphic loci scored in 60 progenies, 173 segregated in a 1：1 ratio, corresponding to DNA polymorphisms heterozygous in a single parent, and the other 58 loci existing in both parents followed a 3：1 Mendelian segregation ratio. Among the loci with 1：1 segregating ratios, 79 loci were ordered in 14 linkage groups （648.6 cM） of the paternal map, and 72 loci were ordered in 14 linkage groups （601.9 cM） of the maternal map. The average density of loci was approximately 1 per 8 cM. To Investigate the homologies between two parental maps, we used 58 loci segregated 3：1 for further analysis, and deduced one homologous linkage group. The linkage data developed in these maps will be useful for detecting loci-controlling commercially important traits for Laminaria.     

SSR based linkage and mapping analysis of C,a yellow cocoon gene in the silkworm,Bombyx moil

The yellow color of the cocoon of the silkworm Bombyx mori is controlled by three genes, Y （Yellow haemolymph）, 1 （Yellow inhibitor） and C （ Outer-layer yellow cocoon）, which are located on linkage groups 2, 9 and 12, respectively. Taking advantage of a lack of crossing over in females, reciprocal backcrossed F1 （BC1） progeny were used for linkage analysis and mapping of the C gene using silkworm strains C 108 and KY, which spin white and yellow cocoons, respectively. DNA was extracted from individual pupae and analyzed for simple sequence repeat （SSR） markers. The C gene was found to be linked to seven SSR markers. All the yellow cocoon individuals from a female heterozygous backcross （BC1F） showed a heterozygous profile for SSR markers on linkage group 12, whereas individuals with light yellow cocoons showed the homozygous profile of the strain C108. Using a reciprocal heterozygous male backcross （BC1M）, we constructed a linkage map of 36.4 cM with the C gene located at the distal end, and the closest SSR marker at a distance of 13.9 cM.     

High-density Linkage Map of Cultivated Allotetraploid Cotton Based on SSR, TRAP, SRAP and AFLP Markers

A high-density linkage map was constructed for an F2 population derived from an Interspecific cross of cultivated allotetraploid species between Gossypium hirsutum L. and G. barbadense L. A total of 186 F2 individuals from the Interspecific cross of ＂CRI 36 × Hal 7124＂ were genotyped at I 252 polymorphic loci Including a novel marker system, target region amplification polymorphism （TRAP）. The map consists of 1 097 markers, including 697 simple se- quence repeats （SSRs）, 171 TRAPs, 129 sequence-related amplified polymorphisms, 98 amplified fragment length polymorphisms, and two morphological markers, and spanned 4 536.7 cM with an average genetic distance of 4.1 cM per marker. Using 45 duplicated SSR loci among chromosomes, 11 of the 13 pairs of homologous chromosomes were Identified In tetraploid cotton. This map will provide an essential resource for high resolution mapping of quantitative trait loci and molecular breeding in cotton.     

Fine mapping quantitative trait loci affecting milk production traits on bovine chromosome 6 in a Chinese Holstein population

To fine map the previously detected quantitative trait loci （QTLs） affecting milk production traits on bovine chromosome 6 （BTA6）, 15 microsatellite markers situated within an interval of 14.3 cM spanning from BMS690 to BM4528 were selected and 918 daughters of 8 sires were genotyped. Two mapping approaches, haplotype sharing based LD mapping and single marker regression mapping, were used to analyze the data. Both approaches revealed a quantitative trait locus （QTL） with significant effects on milk yield, fat yield and protein yield located in the segment flanked by markers BMS483 and MNB209, which spans a genetic distance of 0.6 cM and a physical distance of 1.5 Mb. In addition, the single marker regression mapping also revealed a QTL affecting fat percentage and protein percentage at marker DIK2291. Our fine mapping work will facilitate the cloning of candidate genes underlying the QTLs for milk production traits.     

用微卫星标记构建两系稻培矮64s/E32的分子遗传连锁图 Construction of a Microsatellite Linkage Map in a DH Population

用两系杂交稻强优组合培矮64s/E32的一个加倍单倍体（DH）群体,共86个株系,构建了水稻的SSR标记遗传连锁图。选用美国康耐尔大学公布的302对SSR引物,共有127对在两个亲本间检测到多态性,比率为4205%。建成的水稻染色体的图谱（记为PEMAP）共包含122个SSLP标记座位,总长度为1213.4 cM。PEMAP与Temnykh等发表的图谱（记为CUMAP）具有很高的可比性,绝大多数标记都被定位于相同的染色体上,且排列顺序一致。该DH群体的偏分离情况较严重,122个标记座位中有34个发生显著偏分离,比例达27.8%。值得注意的是,在第1、3、10、11染色体上的标记全部偏向培矮64s,第4、6、7、8、9染色体上的标记则全部偏向E32。 Abstract:A doubled haploid population (DH) consisting of 86 lines derived by anther culture of Peiai64s/E32,a two-line hybrid rice variety with high heterosis,was used to construct a microsatellite or SSLP linkage map of rice chromosomes.A total of 302 PCR primers for SSLP analysis on these chromosomes were chosen from a map published by Cornell University (designated CUMAP) and 127 (42.05%) of them were found polymorphic between the two parents.Those polymorphic PCR primers were used for population genotyping.The map (designated PEMAP) comprises 122 microsatellite maker loci,covering a total length of 1213.4 cM.The PEMAP is highly comparable with the CUMAP.Most of the markers were mapped onto the same chromosomes and aligned in the same order.Serious segregation distortion was observed in this DH population,with 34 (27.8%) markers showing significant deviation.It is noted that all markers on chromosomes 1,3,10 and 11 were biased to Peiai64s,while those on chromosomes 4,6,7,8 and 9 were opposite.     

QTL Scanning for Rice Yield Using a Whole Genome SNP Array

High-throughput SNP genotyping is widely used for plant genetic studies. Recently, a RICE6K SNP array has been developed based on the Illumina Bead Array platform and Infinium SNP assay technology for genome-wide evaluation of allelic variations and breeding applications. In this study, the RICE6K SNP array was used to genotype a recombinant inbred line （RIL） population derived from the cross between the indica variety, Zhenshan 97, and the japonica variety, Xizang 2. A total of 3324 SNP markers of high quality were identified and were grouped into 1495 recombination bins in the RIL population. A high-density linkage map, consisting of the 1495 bins, was developed, covering 1591.2 cM and with average length ofl.1 cM per bin. Segregation distortions were observed in 24 regions of the 11 chromosomes in the RILs. One half of the distorted regions contained fertility genes that had been previously reported. A total of 23 QTLs were identified for yield. Seven QTLs were firstly detected in this study. The positive alleles from about half of the identified QTLs came from Zhenshan 97 and they had lower phenotypic values than Xizang 2. This indicated that favorable alleles for breeding were dispersed in both parents and pyramiding favorable alleles could develop elite lines. The size of the mapping population for QTL analysis using high throughput SNP genotyping platform is also discussed.     

Quantitative Trait Loci Mapping of Flag-leaf Ligule Length in Rice and Alignment with ZmLG1 Gene

A doubled haploid （DH） population, which consists of 120 lines derived from anther culture of a typical indica and japonica hybrid‘CJ06＇/‘TNI＇, was used in this study. Ligule lengths of flag leaf were investigated for quantitative trait loci （QTL） mapping using the DH population. Five QTLs （qLL-2, qLL.4, qLL-6, qLL-IO and qLL-12） controlling the ligule length （LL） were detected on chromosomes 2, 4, 6, 10 and 12, with the variances explained 11.4%, 13.6%, 27.8%, 22.1% and 11.0%, respectively. Using four known genes of ZmGL1, ZmGL2, ZmGL3 and ZmGL4 in maize from the MaizeGDB, their homologs in rice were aligned and integrated into the existing simple sequence repeats linkage map by in silico mapping. A ZmLG1 homolog gene, OsLG1 encoding a squamosa promoter binding protein, was located between the markers RM255 and RM280, which is just identical to the interval of qLL.4 on the long arm of chromosome 4. The results are beneficial to dissection of the ligule molecular mechanism and the study of cereal evolution.     

RAPD-based genetic linkage maps of Tribolium castaneum.

A genetic map of the red flour beetle (Tribolium castaneum) integrating molecular with morphological markers was constructed using a backcross population of 147 siblings. The map defines 10 linkage groups (LGs), presumably corresponding to the 10 chromosomes, and consists of 122 randomly amplified polymorphic DNA (RAPD) markers, six molecular markers representing identified genes, and five morphological markers. The total map length is 570 cM, giving an average marker resolution of 4.3 cM. The average physical distance per genetic distance was estimated at 350 kb/cM. A cluster of loci showing distorted segregation was detected on LG9. The process of converting RAPD markers to sequence-tagged site markers was initiated: 18 RAPD markers were cloned and sequenced, and single-strand conformational polymorphisms were identified for 4 of the 18. The map positions of all 4 coincided with those of the parent RAPD markers.     

Seed and agronomic QTL in low linolenic acid, lipoxygenase-free soybean (Glycine max (L.) Merrill) germplasm.

Linolenic acid and seed lipoxygenases are associated with off flavours in soybean products. F5 recombinant inbred lines (RILs) from a cross between a low linolenic acid line (RG10) and a seed lipoxygenase-free line (OX948) were genotyped for simple sequence repeats (SSR), random amplified polymorphic DNA (RAPD), sequence-tagged sites (STS), and cleaved amplified polymorphic sequence (CAPS) markers and evaluated for seed and agronomic traits at 3 Ontario locations in 2 years. One hundred twenty markers covering 1247.5 cM were mapped to 18 linkage groups (LGs) in the soybean composite genetic map. Seed lipoxygenases L-1 and L-2 mapped as single major genes to the same location on LG G13-F. L-3 mapped to LG G11-E. This is the first report of a map position for L-3. A major quantitative trait locus (QTL) associated with reduced linolenic acid content was identified on LG G3-B2. QTLs for 12 additional seed and agronomic traits were detected. Linolenic acid content, linoleic acid content, yield, seed mass, protein content, and plant height QTL were present in at least 4 of 6 environments. Three to 8 QTLs per trait were detected that accounted for up to 78% of total variation. Linolenic acid and lipoxygenase loci did not overlap yield QTL, suggesting that it should be possible to develop high-yielding lines resistant to oxidative degradation by marker-assisted selection (MAS).     

Genetic linkage map of the loach <Emphasis Type="Italic">Misgurnus anguillicaudatus</Emphasis> (Teleostei: Cobitidae)

In the present study, the first genetic linkage map of the loach Misgurnus anguillicaudatus was constructed with 164 microsatellite markers and a color locus, and it included 155 newly developed markers. A total of 159 microsatellite markers and a color locus were mapped in 27 linkage groups (LGs). The female map covered 784.5 cM with 153 microsatellite markers and a color locus, whereas the male map covered 662.2 cM with 119 microsatellite markers. The centromeric position in each LG was estimated by marker-centromere mapping based on half-tetrad analysis. In 4 LGs (LG2, LG3, LG4, and LG5), the centromere was estimated at the intermediate region. In LG1, LG11, and LG12, the centromere was estimated to shift from the sub-intermediate region to the end (telomeric). The number of these LGs (7) was identical to the collective number of bi-arm metacentric (5) and sub-metacentric chromosome (2) of the haploid chromosome set (n = 5) of the loach. In the other LGs, the position of the centromere was estimated at the end or outside. These results indicate satisfactory compliance between the linkage map and the chromosome set. Our map would cover approximately almost the entire loach genome because most markers were successfully mapped.     

An intraspecific linkage map of the chickpea (<Emphasis Type="Italic">Cicer arietinum</Emphasis> L.) genome based on sequence tagged microsatellite site and resistance gene analog markers

An intraspecific linkage map of the chickpea genome based on STMS as anchor markers, was established using an F(2) population of chickpea cultivars with contrasting disease reactions to Ascochyta rabiei (Pass.) Lab. At a LOD-score of 2.0 and a maximum recombination distance of 20 cM, 51 out of 54 chickpea-STMS markers (94.4%), three ISSR markers (100%) and 12 RGA markers (57.1%) were mapped into eight linkage groups. The chickpea-derived STMS markers were distributed throughout the genome, while the RGA markers clustered with the ISSR markers on linkage groups LG I, II and III. The intraspecific linkage map spanned 534.5 cM with an average interval of 8.1 cM between markers. Sixteen markers (19.5%) were unlinked, while l1 chickpea-STMS markers (20.4%) deviated significantly ( P < 0.05) from the expected Mendelian segregation ratio and segregated in favor of the maternal alleles. However, ten of the distorted chickpea-STMS markers were mapped and clustered mostly on LG VII, suggesting the association of these loci in the preferential transmission of the maternal germ line. Preliminary comparative mapping revealed that chickpea may have evolved from Cicer reticulatum, possibly via inversion of DNA sequences and minor chromosomal translocation. At least three linkage groups that spanned a total of approximately 79.2 cM were conserved in the speciation process.     

Construction of intersubspecific molecular genetic map of lentil based on ISSR, RAPD and SSR markers

Lentil (Lens culinaris ssp. culinaris), is a self-pollinating diploid (2n?=?2x?=?14), cool-season legume crop and is consumed worldwide as a rich source of protein (~24.0%), largely in vegetarian diets. Here we report development of a genetic linkage map of Lens using 114 F₂ plants derived from the intersubspecific cross between L 830 and ILWL 77. RAPD (random amplified polymorphic DNA) primers revealed more polymorphism than ISSR (intersimple sequence repeat) and SSR (simple sequence repeat) markers. The highest proportion (30.72%) of segregation distortion was observed in RAPD markers. Of the 235 markers (34 SSR, 9 ISSR and 192 RAPD) used in the mapping study, 199 (28 SSRs, 9 ISSRs and 162 RAPDs) were mapped into 11 linkage groups (LGs), varying between 17.3 and 433.8 cM and covering 3843.4 cM, with an average marker spacing of 19.3 cM. Linkage analysis revealed nine major groups with 15 or more markers each and two small LGs with two markers each, and 36 unlinked markers. The study reported assigning of 11 new SSRs on the linkage map. Of the 66 markers with aberrant segregation, 14 were unlinked and the remaining 52 were mapped. ISSR and RAPD markers were found to be useful in map construction and saturation. The current map represents maximum coverage of lentil genome and could be used for identification of QTL regions linked to agronomic traits, and for marker-assisted selection in lentil.     

Construction of a sequence-tagged high-density genetic map of papaya for comparative structural and evolutionary genomics in brassicales

A high-density genetic map of papaya (Carica papaya L.) was constructed using microsatellite markers derived from BAC end sequences and whole-genome shot gun sequences. Fifty-four F(2) plants derived from varieties AU9 and SunUp were used for linkage mapping. A total of 707 markers, including 706 microsatellite loci and the morphological marker fruit flesh color, were mapped into nine major and three minor linkage groups. The resulting map spanned 1069.9 cM with an average distance of 1.5 cM between adjacent markers. This sequence-based microsatellite map resolved the very large linkage group 2 (LG 2) of the previous high-density map using amplified fragment length polymorphism markers. The nine major LGs of our map represent papaya's haploid nine chromosomes with LG 1 of the sex chromosome being the largest. This map validates the suppression of recombination at the male-specific region of the Y chromosome (MSY) mapped on LG 1 and at potential centromeric regions of other LGs. Segregation distortion was detected in a large region on LG 1 surrounding the MSY region due to the abortion of the YY genotype and in a region of LG6 due to an unknown cause. This high-density sequence-tagged genetic map is being used to integrate genetic and physical maps and to assign genome sequence scaffolds to papaya chromosomes. It provides a framework for comparative structural and evolutional genomic research in the order Brassicales.     

An improved genetic linkage map for cowpea (Vigna unguiculata L.) combining AFLP, RFLP, RAPD, biochemical markers, and biological resistance traits.

An improved genetic linkage map has been constructed for cowpea (Vigna unguiculata L. Walp.) based on the segregation of various molecular markers and biological resistance traits in a population of 94 recombinant inbred lines (RILs) derived from the cross between 'IT84S-2049' and '524B'. A set of 242 molecular markers, mostly amplified fragment length polymorphism (AFLP), linked to 17 biological resistance traits, resistance genes, and resistance gene analogs (RGAs) were scored for segregation within the parental and recombinant inbred lines. These data were used in conjunction with the 181 random amplified polymorphic DNA (RAPD), restriction fragment length polymorphism (RFLP), AFLP, and biochemical markers previously mapped to construct an integrated linkage map for cowpea. The new genetic map of cowpea consists of 11 linkage groups (LGs) spanning a total of 2670 cM, with an average distance of 6.43 cM between markers. Astonishingly, a large, contiguous portion of LG1 that had been undetected in previous mapping work was discovered. This region, spanning about 580 cM, is composed entirely of AFLP markers (54 in total). In addition to the construction of a new map, molecular markers associated with various biological resistance and (or) tolerance traits, resistance genes, and RGAs were also placed on the map, including markers for resistance to Striga gesnerioides races 1 and 3, CPMV, CPSMV, B1CMV, SBMV, Fusarium wilt, and root-knot nematodes. These markers will be useful for the development of tools for marker-assisted selection in cowpea breeding, as well as for subsequent map-based cloning of the various resistance genes.     

The first genetic and comparative map of white lupin (Lupinus albus L.): identification of QTLs for anthracnose resistance and flowering time, and a locus for alkaloid content.

We report the first genetic linkage map of white lupin (Lupinus albus L.). An F8 recombinant inbred line population developed from Kiev mutant x P27174 was mapped with 220 amplified fragment length polymorphism and 105 gene-based markers. The genetic map consists of 28 main linkage groups (LGs) that varied in length from 22.7 cM to 246.5 cM and spanned a total length of 2951 cM. There were seven additional pairs and 15 unlinked markers, and 12.8% of markers showed segregation distortion at P < 0.05. Syntenic relationships between Medicago truncatula and L. albus were complex. Forty-five orthologous markers that mapped between M. truncatula and L. albus identified 17 small syntenic blocks, and each M. truncatula chromosome aligned to between one and six syntenic blocks in L. albus. Genetic mapping of three important traits: anthracnose resistance, flowering time, and alkaloid content allowed loci governing these traits to be defined. Two quantitative trait loci (QTLs) with significant effects were identified for anthracnose resistance on LG4 and LG17, and two QTLs were detected for flowering time on the top of LG1 and LG3. Alkaloid content was mapped as a Mendelian trait to LG11.     

An Integrated High-density Linkage Map of Soybean with RFLP, SSR, STS, and AFLP Markers Using A Single F2 Population

Soybean [Glycine max (L.) Merrill] is the most important leguminouscrop in the world due to its high contents of high-quality proteinand oil for human and animal consumption as well as for industrialuses. An accurate and saturated genetic linkage map of soybeanis an essential tool for studies on modern soybean genomics.In order to update the linkage map of a F₂ population derivedfrom a cross between Misuzudaizu and Moshidou Gong 503 and tomake it more informative and useful to the soybean genome researchcommunity, a total of 318 AFLP, 121 SSR, 108 RFLP, and 126 STSmarkers were newly developed and integrated into the frameworkof the previously described linkage map. The updated geneticmap is composed of 509 RFLP, 318 SSR, 318 AFLP, 97 AFLP-derivedSTS, 29 BAC-end or EST-derived STS, 1 RAPD, and five morphologicalmarkers, covering a map distance of 3080 cM (Kosambi function)in 20 linkage groups (LGs). To our knowledge, this is presentlythe densest linkage map developed from a single F₂ populationin soybean. The average intermarker distance was reduced to2.41 from 5.78 cM in the earlier version of the linkage map.Most SSR and RFLP markers were relatively evenly distributedamong different LGs in contrast to the moderately clusteredAFLP markers. The number of gaps of more than 25 cM was reducedto 6 from 19 in the earlier version of the linkage map. Thecoverage of the linkage map was extended since 17 markers weremapped beyond the distal ends of the previous linkage map. Inparticular, 17 markers were tagged in a 5.7 cM interval betweenCE47M5a and Satt100 on LG C2, where several important QTLs wereclustered. This newly updated soybean linkage map will enableto streamline positional cloning of agronomically importanttrait locus genes, and promote the development of physical maps,genome sequencing, and other genomic research activities.     

Development of an AFLP-based linkage map and localization of QTLs for seed fatty acid content in condiment mustard (Brassica juncea).

A genetic linkage map of Brassica juncea based on AFLP and RAPD markers was constructed using 131 F1-derived doubled-haploid (DH) plants from a cross between two mustard lines. The map included 273 markers (264 AFLP, 9 RAPD) arranged on 18 linkage groups, and covered a total genetic distance of 1641 cM; 18.3% of the AFLP markers showed a segregation distortion (P < 0.01). The markers with biased segregation were clustered on seven linkage groups. QTLs for oil contents, palmitic acid (16:0), stearic acid (18:0), oleic acid (18:1), linoleic acid (18:2), linolenic acid (18:3), eicosenoic acid (20:1), and erucic acid (22:1), were mapped on the AFLP linkage map. Correlation studies among fatty acids in the DH population and the localization of QTLs involved in their control indicated that a major gene located on linkage group (LG) 2 controlled the elongation step of erucic acid.