Optimization of extraction process of Glycyrrhiza glabra polysaccharides by response surface methodology

Experimental design was used to investigate the effect of three parameters (extraction time, extraction number and ratio of water to raw material) on polysaccharides yields. The ranges of the factors investigated were 3.5–4.5 h for extraction time (X₁), 4–6 for extraction number (X₂), and 25–35 for ratio of water to raw material (X₃). The statistical analysis of the experiment indicated that extraction time and ratio of water to raw material had significant effect on Glycyrrhiza glabra polysaccharides yields. The central composite design showed that polynomial regression models were in good agreement with the experimental results with the coefficients of determination of 0.924 for Glycyrrhiza glabra polysaccharides yield. The optimal condition for Glycyrrhiza glabra polysaccharides yield within the experimental range of the variables studied was at 4.3 h, 6, and 35. At this condition, the predicted yield of polysaccharides extracted was 3.6%.     

Optimization of extraction technology of the Anemone raddeana polysaccharides (ARP) by orthogonal test design and evaluation of its anti-tumor activity

In order to get high quality bioactive polysaccharides (ARP) from Anemone raddeana, an orthogonal experiment (L₉(3)⁴) was applied to optimize the best extraction conditions. Extraction time, extraction temperature, number of extraction and water to raw material ratio were the main factors to influence the yield and purity of the extracted crude polysaccharides. The four factors chosen for the present investigation were based on the results of a single-factor test. The optimum extraction conditions were determined as follows: extraction time 1.5 h, temperature 80 °C, number 4 and water to raw material at 6. Under optimized conditions, the experimental yield 7.97 ± 0.27% agreed closely with the predicted yield. In vivo ARP at suitable dose is effective on Th1 cells, as associated with an enhancement of IgG2a and IgG2b levels. In vitro ARP significantly inhibited the proliferation of human hepatocellular carcinoma HEP-G2 and human intestinal cancer HCT-22 cells, indicating ARP could be a potential anti-cancer therapeutic agent.     

Optimization of ultrasonic-assisted extraction process of Poria cocos polysaccharides by response surface methodology

Polysaccharides production from Poria cocos was carried out using aqueous NaOH with the assistance of ultrasonic. Experimental design was used to investigate the effect of three parameters (extraction time, extraction concentration of NaOH, and ratio of aqueous NaOH to raw material) on polysaccharides yields. The ranges of the factors investigated were 1–3 min for extraction time (X₁), 0.5–1.0 mol/L for extraction concentration of NaOH (X₂), and 30–50 for ratio of aqueous NaOH to raw material (X₃). The statistical analysis of the experiment indicated that extraction concentration of NaOH had significant effect on P. cocos polysaccharides yields. The central composite design showed that polynomial regression models were in good agreement with the experimental results with the coefficients of determination of 0.9935 for P. cocos polysaccharides yield. The optimal condition for P. cocos polysaccharides yield within the experimental range of the variables studied was at 2.44 min, 0.789 mol/L, and 53.0. At this condition, the predicted yield of polysaccharides extracted was 82.3%.     

Optimization of polysaccharides (ABP) extraction from the fruiting bodies of Agaricus blazei Murill using response surface methodology (RSM)

Response surface methodoloty (RSM) was used to optimize the extraction conditions of polysaccharides (ABP) from the fruiting body of Agaricus blazei. A central composite design (CCD) was used for experimental design and analysis of the results to obtain the optimal processing parameters. Four independent variables such as extraction temperature (°C), ratio of water to raw material, number of extraction, and extraction time (h) were investigated. The experimental data obtained were fitted to a second-order polynomial equation using multiple regression analysis and also analyzed by appropriate statistical methods. The 3-D response surface plot and the contour plot derived from the mathematical models were applied to determine the optimal conditions. The optimum extraction conditions were as follows: extraction temperature 91 °C, ratio of water to raw material 14, number of extraction 6, and extraction time 2.1 h. Under these conditions, the experimental value was 65.8 ± 1.42, which is well in close agreement with value predicted by the model.     

Response surface optimization of polysaccharides extraction from liriope roots and its modulatory effect on sjogren syndrome

The response surface methodology (RSM) was employed to study the extraction of liriope polysaccharides. The maximum extraction rate (64.1%) of liriope polysaccharides obtained by using the above optimised concentrations of the variables was extraction time (X₁) at 185 min, ratio of liquid to solid (X₂) at 11, and extraction temperature (X₃) at 94 °C. Forty male Wistar rats were used in the present experiment. After 2 weeks of acclimatization, animals were divided into 5 equal groups: control, SS model and 3 polysaccharides-treatment groups. Rats were orally administered their respective doses every day for 6 weeks. Liriope polysaccharides significantly increased the amount of salivary secretion, and the relative weight of spleen, thymus and submandibular glands. Therefore, the present results revealed that liriope polysaccharides exert a protective effect against tissue damage in rats with sjogren syndrome (SS).     

A simple method for DNA extraction from sporophyte in the brown alga <Emphasis Type="Italic">Laminaria japonica</Emphasis>

A simple method was developed for extracting DNA from brown algae Laminaria japonica, which possess large amounts of acidic polysaccharides. Firstly, the sporophyte were washed by eliminating polysaccaride buffer to remove the polysaccharides and then ground in liquid nitrogen. Secondly, the powders were treated with lysing buffer. Thirdly, KAc was used to eliminate the remaining acidic polysaccharides. The extracted DNA was purified using a chloroform-isoamyl alcohol (24:1 v/v), and precipitated in cold isopropanol. The yield was from 18.7 to 37.5 μg g⁻¹ (wet weight) and the purity of total DNA was determined spectrophotometrically as the ratio of A₂₆₀/A₂₈₀, which was about 1.7–1.9. The extracted DNA was of high quality and suitable for molecular analyses, such as PCR, restriction enzyme digestion. This method is a reproducible, simple, and rapid technique for routine DNA extraction from sporophyte in Laminaria japonica. Furthermore, the low cost of this method makes it attractive for large-scale studies.     

Orthogonal Test Design for Optimization of the Extraction of Polysaccharides from Inonotus cuticularis and Their Antioxidant Activities

Medical fungi polysaccharides belong to a very important species of biological macromolecules, which are the basic substances that effectively maintain and ensure the normal operation of biological life activities. However, research on extraction and biological activity of Inonotus cuticularis polysaccharides has never been reported. In this study, the optimum yield of Inonotus cuticularis polysaccharides was determined by the orthogonal experimental design. The highest yield of 3.10±0.06 % was obtained with extraction temperature of 80 °C, extraction time of 150 min, and water to raw material ratio of 30 mL/g and repeated twice. After deproteinization for 5 times, the protein removal rate reached 70.10±1.75 %, and the content of polysaccharides and protein were 46.64 and 0.42 %. Infrared spectrometer indicated that Inonotus cuticularis polysaccharides are typical β‐pyranose with characteristic peaks of polysaccharides. Subsequently, the activities of scavenging free radicals for the deproteinated polysaccharides were studied. When the concentration of Inonotus cuticularis polysaccharides was 0.3 mg/mL, the scavenging activities of the sample on DPPH^., ^.OH, ABTS^.+ and O₂^.? reached 83.67±0.27, 65.21±4.82, 43.45±1.36 and 80.28±2.30 %, respectively, and the reducing power reached 0.46±0.01. The IC₅₀ values scavenging DPPH^., ^.OH, ABTS^.+ and O₂^.? were 0.139±0.13, 0.162±0.14, 0.317±0.30 and 0.121±0.10 mg/mL, respectively. Results showed that Inonotus cuticularis polysaccharides present potential stronger antioxidant activities, especially ^.OH scavenging activity and reducing power. Experimental results could provide research basis of Inonotus cuticularis polysaccharides for further exploitation and utilization.     

Enhanced production of poly(3-hydroxybutyrate-<Emphasis Type="Italic">co</Emphasis>-4-hydroxybutyrate) copolymer with manipulated variables and its properties

Cupriavidus sp. USMAA1020, a local isolate was able to biosynthesis poly(3-hydroxybutyrate-co-4-hydroxybutyrate) [P(3HB-co-4HB)] copolymer with various 4HB precursors as the sole carbon source. Manipulation of the culture conditions such as cell concentration, phosphate ratio and culture aeration significantly affected the synthesis of P(3HB-co-4HB) copolymer and 4HB composition. P(3HB-co-4HB) copolymer with 4HB compositions ranging from 23 to 75 mol% 4HB with various mechanical and thermal properties were successfully produced by varying the medium aeration. The physical and mechanical properties of P(3HB-co-4HB) copolymers were characterized by NMR spectroscopy, gel-permeation chromatography, tensile test, and differential scanning calorimetry. The number-average molecular weights (M _n) of copolymers ranged from 260 × 10³ to 590 × 10³Da, and the polydispersities (M _w/M _n) were between 1.8 and 3.0. Increases in the 4HB composition lowered the molecular weight of these copolymers. In addition, the increase in 4HB composition affected the randomness of copolymer, melting temperature (T _m), glass transition temperature (T _g), tensile strength, and elongation to break. Enzymatic degradation of P(3HB-co-4HB) films with an extracellular depolymerase from Ochrobactrum sp. DP5 showed that the degradation rate increased proportionally with time as the 4HB fraction increased from 17 to 50 mol% but were much lower with higher 4HB fraction. Degradation of P(3HB-co-4HB) films with lipase from Chromobacterium viscosum exhibited highest degradation rate at 75 mol% 4HB. The biocompatibility of P(3HB-co-4HB) copolymers were evaluated and these copolymers have been shown to support the growth and proliferation of fibroblast cells.     

Cherry fruit development: The use of a microassay for studying indoleacetic acid oxidase

An improved procedure is described for extraction and assay of indoleacetic acid oxidase from seeds of sour cherry (Prunus cerasus L.). The extraction procedure was optimized for pH, buffer, polyvinylpolypyrrolidone (PVP) and tissue: buffer ratio. Greatest extraction efficiency was obtained at pH 4.0, 0.2 M acetate buffer, tissue: PVP ratio of 1:2.5 and tissue: buffer ratio of 50 ml per g of seed. The enzyme was assayed at 30°C using indoleacetic acid-1-¹⁴C as substrate and radioassaying the ¹⁴CO₂ evolved. Mn²⁺ and 2,4-dichlorophenol enhanced enzyme activity but were not obligatory. A minimum substrate concentration of 60 M was needed for quantitative evaluation. This assay was sensitive and reproducible, enzyme activity being demonstrated in as little as 0.8 mg of seed tissue with a coefficient of variation of 1 to 9%.     

Effect of Abiotic Stress on Phosphate Solubilization by Biocontrol Fungus <Emphasis Type="Italic">Trichoderma</Emphasis> sp.

This study was undertaken to explore the role of Trichoderma sp. in phosphate (P) solubilization and antagonism against fungal phytopathogens. All fungal isolates (SE₆, KT₆, KT₂₈, and BRT₁₁) and a standard culture of T. harzianum (Th-std) were able to antagonize two fungal phytopathogens (Sclerotium rolfsii and Rhizoctonia solani) of chickpea (Cicer arietinum L.) wilt complex. Transmission electron microscopic studies (TEM) further confirmed ultra-cytological changes in the sclerotia of S. rolfsii parasitized by Trichoderma sp. All fungal cultures exhibited production of NH₃ and siderophore, but only BRT₁₁, SE₆, and Th-std could produce HCN. Among all the cultures tested, isolate KT₆ was found to be most effective for solubilization of ferric phosphate releasing 398.4 μg ml⁻¹ phosphate while isolates BRT₁₁ and SE₆ showed more potential for tricalcium phosphate (TCP) solubilization releasing 449.05 and 412.64 μg ml⁻¹ phosphate, respectively, in their culture filtrates. Part of this study focused on the influence of abiotic stress conditions such as pH, temperature, and heavy metal (cadmium) on phosphate (TCP) solubilizing efficiency. Two selected cultures KT₆ and T. harzianum retained their P solubilizing potential at varying concentrations of cadmium (0–1000 μg ml⁻¹). Isolate KT₆ and standard culture of T. harzianum released 278.4 and 287.6 μg ml⁻¹ phosphate, respectively, at 1000 μg ml⁻¹cadmium. Maximum solubilization of TCP was obtained at alkaline pH and at 28°C temperature. Isolate BRT₁₁ was found most alkalo-tolerant releasing 448.0 μg ml⁻¹ phosphate at pH 9.     

Extraction, characterization of Astragalus polysaccharides and its immune modulating activities in rats with gastric cancer

One major polysaccharide fractions, glucose, were isolated from the polysaccharides extract of Astragalus (AP), a valuable traditional Chinese medicine, using thin-layer chromatography (TLC) and Sephadex G-100 chromatography. HPLC and IR methods were used for a qualitative and quantitative determination of from polysaccharides of Astragalus. The HPLC method was validated for linearity, precision and accuracy. The results indicated that polysaccharides of Astragalus is an α-(1 → 4)-d-glucan with α-(1 → 6)-linked branches attached to the O-6 of branch points. Bioactivity tests showed that polysaccharides of Astragalus is active for spleen lymphocytes proliferation. The polysaccharides also presented anti-inflammatory activities. These data together suggest that polysaccharides of Astragalus presents significant immune modulating activity, thus supporting the popular use of the polysaccharides in the treatment of gastric cancer diseases.     

High cell density production of <Emphasis Type="Italic">Deinococcus radiodurans</Emphasis> under optimized conditions

Deinococcus radiodurans is a bacterium being investigated for mechanisms of extreme radiation resistance and for bioremediation of environmental radioactive waste sites. In both fundamental and applied research settings, methods for large-scale production of D. radiodurans are needed. In this study, a systematic investigation was carried out to optimize D. radiodurans production at the 20-L fermentor scale. In defined medium, the phosphate buffer typically used was found to be inhibitory to D. radiodurans growth, and caused cell aggregation. Substitution of HEPES and MOPS buffers for phosphate buffer improved D. radiodurans growth characteristics. Several antifoaming agents were investigated to support large-scale production with submerged aeration, and the defoamer KFO 673 was chosen based on its ability to prevent foaming without affecting D. radiodurans growth. The conventional undefined rich medium tryptone/glucose/yeast extract (TGY) maximally supported D. radiodurans growth to an OD₆₀₀ of 10. Using a ‘design of experiments’ approach, we found glucose, Mg and Mn to be critical in supporting high-density growth of D. radiodurans. The optimal pH and temperature for D. radiodurans growth in large-scale preparations were 7.0 and 37°C, respectively. Growth was carried out in a 20-L fermentor using the newly developed media under the optimal conditions. With addition of 10 g/L glucose, 0.5 g/L MgSO₄ · 7H₂O, 5 μM MnCl₂ into TGY media, an OD₆₀₀ of 40 was achieved.     

Growth of Chlorella pyrenoidosa in wastewater from cassava ethanol fermentation

In a cycle tubular photobioreactor, Chlorella pyrenoidosa was cultured in undiluted wastewater from ethanol fermentation using cassava powder as raw material. The results showed that the optimum cultivation conditions were initial pH of 6.0, temperature at 27°C, continuous illumination at 3,000 lux, and cycle speed of 110 ml min⁻¹. Under these optimum conditions, after the logarithmic phase of batch cultivation with wastewater of pH 6.0, the reactor could be continuously operated with natural pH wastewater (3.8) as feed solution. By a dilution ratio of 0.17 day⁻¹, it could be operated stably for over 30 days in continuous cultivation. pH, removal rate of chemical oxygen demand, and biomass (cell dry weight) concentration ranged from 6.22 to 6.47, 72.21 to 76.32% and 3.55 to 3.73 g l⁻¹, respectively. After treatment, the wastewater could be used again in the process of ethanol fermentation.     

Molecular mass and chain conformations of Rhizoma Panacis Japonici polysaccharides

The molecular mass and size of five water-soluble polysaccharides isolated from Rhizoma Panacis Japonici (RPJ) were determined with laser light scattering (LLS), size-exclusion chromatography (SEC) combined with LLS (SEC–LLS), dynamic light scattering (DLS), as well as transmission electron microscope (TEM). Their weight-average molecular masses (M_w) were 3.5 × 10⁴, 1.47 × 10⁵, 1.24 × 10⁶, 9.26 × 10⁵ and 1.36 × 10⁶, radii of gyration (<s²>_z^1/2) were 14.7, 31.7, 50.8, 41.8 and 40.4 nm, and hydrodynamic radii (R_h) were 19.9, 37.5, 66.2, 52.1, and 55.2 nm, respectively. The results showed that molecular masses and sizes of the polysaccharides were influenced by the pH and temperature of the extraction mediums. The conformation parameters were calculated from the above data according to polymer solution theory. The values of ρ (= <s²>_z^1/2/R_h) were from 0.7 to 0.8, exponents (ν) of <s²>_z^1/2 = k M_w^ν were from 0.31 to 0.43, and fractal dimension (d_f) were from 2.3 to 3.2, respectively. The results revealed that all of the polysaccharides existed as spheres in 0.15 M NaCl aqueous solution. TEM and atomic force microscope (AFM) further confirmed the spherical morphologies of these molecules. The spherical conformations of the polysaccharides were a result of their highly branched structures.     

Extraction, isolation and cadmium binding of alginate from Sargassum spp.

Sargassum brown algal species have recently shown promise for use in flow-through column systems that rely on a passive ion-exchange mechanism for the remediation of toxic heavy metals such as Pd, Cd, and Zn from contaminated waters. To elucidate the metal binding mechanism and optimise this so-called biosorption process, detailed information on the biochemistry of the raw biomass and the alginate in particular is essential. This study focuses on the detailed characterisation (e.g., percentage of yield, block co-polymer structure) of the various fractions of material isolated from S. fluitans and S. oligocystum following a (i) standard neutral, (ii) alkaline (NaOH) and (iii) high-temperature alkaline alginate (80 °C; Na₂CO₃) extraction. Results indicate that the alginate yield was independent of the temperature or the extraction method employed (21.1 to 22.8% and 18.9 to 20.5% yields for S. fluitans and S. oligocystum, respectively). Furthermore, ¹H-nuclear magnetic resonance (NMR) analyses revealed that the alginates isolated by the three methods displayed nearly identical doublet -L-guluronic acid frequencies (F _GG; between 0.55 to 0.58 for both S. fluitans and S. oligocystum). Cadmium binding experiments (pH 4.5) further demonstrated that the three alginate extracts have similar metal binding capacities (uptake ranging from 1.59 to 1.81 mmol Cd/gram). The implementation of the high-temperature alkaline extraction procedure resulted in the isolation of a new acid-soluble fraction (ASF), capable of binding cadmium at pH 4.5, which cannot be isolated by the standard neutral extraction protocol. A preliminary characterisation of this ASF revealed the presence of minor quantities of proteins and sulphated polysaccharides, as well as traces of alginate and possibly other low-molecular weight uronic acid-containing polymers.     

A statistical approach for optimization of R-phycoerythrin extraction from the red algae Gracilaria verrucosa by enzymatic hydrolysis using central composite design and desirability function

The aim of this research is to statistically optimize enzymatic hydrolysis parameters for the production of R-phycoerythrin (RPE) from red algae Gracilaria verrucosa. Six independent variables, incubation temperature, incubation time, ratio of buffer to raw material, cellulase loading, xylanase loading, and pH, were selected for response surface methodology studies. A central composite design was employed to maximize RPE production. A mathematical model with high determination coefficient (R ²?=?0.86) was developed and could be employed to optimize RPE extraction. The optimal extraction conditions of RPE were determined as follows: incubation temperature (48°C), incubation time (6?h), ratio of buffer to raw material (20 w/v), cellulase loading (15%), xylanase loading (5%), and pH (6.5). Under this optimal condition, the experimental yield of RPE was 6.25?mg?g^?1. Based on the result of response surface methodology and desirability function approach study, total sugar, the main by-product in RPE extraction was considered as another response. A new optimal condition was predicted as follows: incubation temperature (30°C), incubation time (12?h), ratio of buffer to raw material (20, w/v), cellulase loading (15%), xylanase loading (5%), and pH (6). Under this condition, similar RPE levels were obtained while the concentration of total sugar decreased by 40%.     

New Structures of the O-Specific Polysaccharides of Bacteria of the Genus Proteus. 1. Phosphate-Containing Polysaccharides

The O-specific polysaccharide chains (O-antigens) of the lipopolysaccharides of five Proteus strains, P. vulgaris O17, P. mirabilis O16 and O33, and P. penneri 31 and 103, were found to contain phosphate groups that link the non sugar components, e.g., ethanolamine and ribitol. The polysaccharides of P. mirabilis O16 and P. penneri 103 include ribitol phosphate in the main chain and thus resemble ribitol teichoic acids of Gram-positive bacteria. The structures of the polysaccharides were elucidated using NMR spectroscopy, including two-dimensional ¹H, ¹H correlation spectroscopy (COSY and TOCSY), nuclear Overhauser effect spectroscopy (NOESY or ROESY), and H-detected ¹H, ¹³C and ¹H, ³¹P heteronuclear multiple-quantum coherence spectroscopy (HMQC), along with chemical methods. The structures determined are unique among the bacterial polysaccharides and, together with the data obtained earlier, represent the chemical basic for classification of Proteus strains. Based on structural similarities of the O-specific polysaccharides and serological relationships between the O-antigens, we propose to extend Proteus serogroups O17 and O19 by including P. penneri strains 16 and 31, respectively.     

Bottom-up controls on a mixed-species HAB assemblage: A comparison of sympatric Chattonella subsalsa and Heterosigma akashiwo (Raphidophyceae) isolates from the Delaware Inland Bays, USA

Recent novel mixed blooms of several species of toxic raphidophytes have caused fish kills and raised health concerns in the highly eutrophic Inland Bays of Delaware, USA. The factors that control their growth and dominance are not clear, including how these multi-species HAB events can persist without competitive exclusion occurring. We compared and contrasted the relative environmental niches of sympatric Chattonella subsalsa and Heterosigma akashiwo isolates from the bays using classic Monod-type experiments. C. subsalsa grew over a temperature range from 10 to 30 °C and a salinity range of 5–30 psu, with optimal growth occurring from 20 to 30 °C and 15 to 25 psu. H. akashiwo had similar upper temperature and salinity tolerances but also lower limits, with growth occurring from 4 to 30 °C and 5 to 30 psu and optimal growth between 16 and 30 °C and 10 and 30 psu. These culture results were confirmed by field observations of bloom occurrences in the Inland Bays. Maximum nutrient-saturated growth rates (μ_max) for C. subsalsa were 0.6 d⁻¹ and half-saturation concentrations for growth (K_s) were 9 μM for nitrate, 1.5 μM for ammonium, and 0.8 μM for phosphate. μ_max of H. akashiwo (0.7 d⁻¹) was slightly higher than C. subsalsa, but K_s values were nearly an order of magnitude lower at 0.3 μM for nitrate, 0.3 μM for ammonium, and 0.2 μM for phosphate. H. akashiwo is able to grow on urea but C. subsalsa cannot, while both can use glutamic acid. Cell yield experiments at environmentally relevant levels suggested an apparent preference by C. subsalsa for ammonium as a nitrogen source, while H. akashiwo produced more biomass on nitrate. Light intensity affected both species similarly, with the same growth responses for each over a range from 100 to 600 μmol photons m⁻² s⁻¹. Factors not examined here may allow C. subsalsa to persist during multi-species blooms in the bays, despite being competitively inferior to H. akashiwo under most conditions of nutrient availability, temperature, and salinity.     

Optimisation of RNA extraction from Gracilaria changii (Gracilariales, Rhodophyta)

RNA extraction from seaweed tissues is problematic due to the presence of polysaccharides and polyphenolic compounds upon cell disruption. Besides, a successful RNA isolation from seaweed tissues can sometimes be strain- and species-specific. Four different methods were used to extract RNA from Gracilaria changii (Gracilariales, Rhodophyta), collected from the mangrove area at Morib, Selangor, Malaysia. An optimised and modified total RNA extraction method was developed for this recalcitrant species. The use of sand in tissue grinding, and the incorporation of phenol extraction at the initial stage resulted in the highest RNA yield (0.65–1.14 g g^–1 fresh weight) with high quality (A_260:280 ratio 1.80–2.05). The RNA obtained is suitable for cDNA synthesis and future functional genomic studies.     

Effect of rhizobia and rock biofertilizers with <Emphasis Type="Italic">Acidithiobacillus</Emphasis> on cowpea nodulation and nutrients uptake in a tableland soil

Chemical fertilizers have been used in the cultivation of plants due to their high solubility and effect on crops yield. Biofertilizers with phosphate rock (PR) and potash rock (KR) plus sulfur inoculated with Acidithiobacillus may improve plant growth and contribute to addition of available P and K in soil. The effectiveness of biofertilizers from phosphate and potash rocks mixed with sulfur and Acidithiobacillus was studied in a Typic Fragiuldult soil of the Brazilian Northeast Tableland. Cowpea (cv. “IPA 206”) was grown with and without rhizobia inoculation. Treatments were: (a) phosphate rock (1000 kg ha⁻¹); (b) Biofertilizers-B_P (250 and 500 kg ha⁻¹); (c) triple superphosphate-TSP (250 kg ha⁻¹); (d) potash rock (1000 kg ha⁻¹); (e) biofertilizer-B_K (250; 500 and 750 kg ha⁻¹); (f) potassium chloride-KCl (250 kg K₂0 ha⁻¹); (g) control without P or K fertilization (P₀K₀). The soil was maintained under water submersion covered with black plastic (solarization process) for a period of 30 days. Biofertilizers (B_p and B_K) and soluble fertilizers increased plant growth and NPK uptake. Biofertilizers reduced soil pH, especially when applied in highest rates. Biofertilizers and TSP+KCl showed the best values of available P and K in soil. Rhizobial inoculation was effective on cowpea, but no nodules were formed by bacteria native from the soil, probably due to the effect of the solarization process. From obtained PK biofertilizers could be used as alternative for cowpea fertilization in Tableland soils.