Optimization of extraction technology of the Anemone raddeana polysaccharides (ARP) by orthogonal test design and evaluation of its anti-tumor activity

In order to get high quality bioactive polysaccharides (ARP) from Anemone raddeana, an orthogonal experiment (L₉(3)⁴) was applied to optimize the best extraction conditions. Extraction time, extraction temperature, number of extraction and water to raw material ratio were the main factors to influence the yield and purity of the extracted crude polysaccharides. The four factors chosen for the present investigation were based on the results of a single-factor test. The optimum extraction conditions were determined as follows: extraction time 1.5 h, temperature 80 °C, number 4 and water to raw material at 6. Under optimized conditions, the experimental yield 7.97 ± 0.27% agreed closely with the predicted yield. In vivo ARP at suitable dose is effective on Th1 cells, as associated with an enhancement of IgG2a and IgG2b levels. In vitro ARP significantly inhibited the proliferation of human hepatocellular carcinoma HEP-G2 and human intestinal cancer HCT-22 cells, indicating ARP could be a potential anti-cancer therapeutic agent.     

Extraction of crude polysaccharides from Duchesnea indica (Andrews) Focke: optimization by response surface methodology

A full set of optimization procedure was applied to the extraction of anti-viral polysaccharides from Duchesnea indica (Andrews) Focke. By Plackett–Burman factorial design, three parameters (extraction time, extraction temperature, and ratio of water to raw material) were identified as significant to the extraction yield. However, no significant parameters had been identified for antiviral activity. A three-level-three-factor Box–Behnken factorial design was then employed to further optimize the extraction condition. The experimental data were fitted to a second-order polynomial equation using multiple regression analysis and also examined using appropriate statistical methods. This led to the construction of a response surface indicating the optimal values for each parameter and response studied. Concerning the extraction yield, an extraction at 98.51?ºC for 6.16 h with a ratio of water to raw material of 30.94 mL/g was found to be optimal. Under the optimized conditions, the experimental yield was 6.430 ± 0.078%, which was well matched with the predicted yield of 6.509%.     

Orthogonal test design for optimization of the extraction of polysaccharides from Phascolosoma esulenta and evaluation of its immunity activity

Yield of polysaccharides from Phascolosoma esulenta obtained by phosphate buffer extraction through an orthogonal experiment (L₉(3)⁴) were investigated to get the best extraction conditions. The results showed that extraction temperature, ratio of phosphate buffer to raw material, extraction time, and ratio of trypsinase to raw material were the main four variables that influenced the yields of extracts. The highest yield was obtained when extraction temperature, ratio of phosphate buffer to raw material, extraction time and ratio of trypsinase to raw material were 40 °C, 2, 5.5 h and 1.6, respectively. The immunity-stimulating method showed that polysaccharides from P. esulenta could significantly raise liver, spleen and thymus index of mice and enhance Con A-stimulated mouse spleen cells proliferation. These results indicate that polysaccharides from P. esulenta had significantly higher immunity-stimulating activities.     

Optimization of extraction process of Glycyrrhiza glabra polysaccharides by response surface methodology

Experimental design was used to investigate the effect of three parameters (extraction time, extraction number and ratio of water to raw material) on polysaccharides yields. The ranges of the factors investigated were 3.5–4.5 h for extraction time (X₁), 4–6 for extraction number (X₂), and 25–35 for ratio of water to raw material (X₃). The statistical analysis of the experiment indicated that extraction time and ratio of water to raw material had significant effect on Glycyrrhiza glabra polysaccharides yields. The central composite design showed that polynomial regression models were in good agreement with the experimental results with the coefficients of determination of 0.924 for Glycyrrhiza glabra polysaccharides yield. The optimal condition for Glycyrrhiza glabra polysaccharides yield within the experimental range of the variables studied was at 4.3 h, 6, and 35. At this condition, the predicted yield of polysaccharides extracted was 3.6%.     

Optimization of pectin extraction from lemon by-product with acidified date juice using response surface methodology

Response surface methodology was used to optimize pectin recovery from lemon by-product using an acidified date juice as extraction solution. When enriched in pectin, this latter can be useful for preparation of date-lemon jelly. The effects of three parameters namely temperature, pH and extraction time, on pectin extraction were studied. The fitted mathematical model allowed us to plot response surfaces as well as isoresponse curves and to determine optimal extraction conditions. Results clearly indicated that the temperature was the main factor influencing the pectin yield which increased with temperature and time or decreasing pH. The selected optimal conditions were: temperature 84.34 °C; extraction time 3 h 34 min and pH 2.8. These conditions yielded about 11.21% of pectin versus 10.89% for the predicted value.     

超声波法提取刺五加(Acanthopanax senticosus)中丁香甙的研究

通过均匀设计的试验方法,探计了用超声波法提取刺五加根茎中丁香甙的工艺条件确定的最佳工艺条件为：水为溶剂,溶剂用量8mL／g,超声提取200min,提取温度为室温。     

Optimization of ultrasonic-assisted extraction process of Poria cocos polysaccharides by response surface methodology

Polysaccharides production from Poria cocos was carried out using aqueous NaOH with the assistance of ultrasonic. Experimental design was used to investigate the effect of three parameters (extraction time, extraction concentration of NaOH, and ratio of aqueous NaOH to raw material) on polysaccharides yields. The ranges of the factors investigated were 1–3 min for extraction time (X₁), 0.5–1.0 mol/L for extraction concentration of NaOH (X₂), and 30–50 for ratio of aqueous NaOH to raw material (X₃). The statistical analysis of the experiment indicated that extraction concentration of NaOH had significant effect on P. cocos polysaccharides yields. The central composite design showed that polynomial regression models were in good agreement with the experimental results with the coefficients of determination of 0.9935 for P. cocos polysaccharides yield. The optimal condition for P. cocos polysaccharides yield within the experimental range of the variables studied was at 2.44 min, 0.789 mol/L, and 53.0. At this condition, the predicted yield of polysaccharides extracted was 82.3%.     

Fermentable hexose production from corn stalks and wheat straw with combined supercritical and subcritical hydrothermal technology

Lignocellulosic wastes, including corn stalks and wheat straw, were pretreated and hydrolyzed with combined supercritical and subcritical hydrothermal technology. Soluble sugars were collected by pre-washing the crushed materials before hydrolysis. The effects of solid–liquid ratio, temperature, and reaction time on oligosaccharide production were investigated and the optimum supercritical conditions were found to be 20 mg/2.5 ml water, 384 °C, 17 s for corn stalks and 20 mg/2.5 ml water, 384 °C, 19 s for wheat straw. Subsequent subcritical processing of the hydrolyzate (with or without the water extract) from supercritical treatment was guided by a previous analysis of cellulose hydrolysis kinetics. The highest yield of fermentable hexoses from corn stalks (27.4% of raw material) was obtained at 280 °C, 27 s, and from wheat straw (6.7% of raw material) at 280 °C, 54 s. This study provides novel key parameters for fermentable hexose production from lignocellulosic feedstocks using combined supercritical and subcritical hydrothermal treatment.     

Reproductive and developmental biology of Gonatocerus ashmeadi (Hymenoptera: Mymaridae), an egg parasitoid of Homalodisca coagulata (Hemiptera: Cicadellidae)

The reproductive and developmental biology of Gonatocerus ashmeadi Girault, a parasitoid of the glassy-winged sharpshooter Homalodisca coagulata (Say), was determined at five constant temperatures in the laboratory: 15; 20; 25; 30; 33 °C. At 30 °C, G. ashmeadi maintained the highest successful parasitism rates with 46.1% of parasitoid larvae surviving to adulthood. Lifetime fecundity was greatest at 25 °C and fell sharply as temperature either increased or decreased around 25 °C. Temperature had no effect on sex ratio of parasitoid offspring. Mean adult longevity was inversely related to temperature with a maximum of 20 days at 15 °C to a minimum of eight days at 33 °C. Developmental rates increased nonlinearly with increasing temperatures. Developmental rate data were fitted with the modified Logan model for oviposition to adult development times across each of the five experimental temperatures to determine optimal and upper lethal temperature thresholds. The lower developmental threshold estimated by the Logan model and linear regression were 1.10 and 7.16 °C, respectively. Linear regression of developmental rate for temperatures 15–30 °C indicated that 222 degree-days were required above a minimum threshold of 7.16 °C to complete development. A temperature of 37.6 °C was determined to be the upper development threshold with optimal development occurring at 30.5 °C. Demographic parameters were calculated and pseudo-replicates for intrinsic rate of increase (r_m), net reproductive rates (R_o), generation time (T_c), population doubling time (T_d), and finite rate of increase (λ) were generated using the bootstrap method. Mean bootstrap estimates of demographic parameters were compared across temperatures using ANOVA and nonlinear regression.     

Valorisation of a leguminous specie, Sesbania grandiflora, by means of hydrothermal fractionation

For the purpose of hydrolysing hemicelluloses to oligomers and monomers, Sesbania grandiflora samples were subjected to isothermal autohydrolysis in the temperatures ranging from 145 °C to 190 °C, using a solid to liquid ratio of 8 and reaction times up to 7.5 h. Kinetic models based on sequential pseudo-homogeneous first order Kinetics with Arrhenius type temperature dependence were employed for describing the time course of the main hemicelluloses compounds and their degradation products. The hydrothermal treatment results show that Sesbania grandiflora can be employed as an alternative raw material for the production of XOS leading to high concentrations of XOS (14.1 g/L in the experiment carried out at 190 °C and 0.1 h) and xylan to XOS conversion (62.6% in the experiment carried out at 190 °C and 6 min). The model proposed provides a satisfactory interpretation of the experimental data obtained in the hydrothermal treatments of this study.     

超声辅助低共熔溶剂提取沙棘籽粕多酚的工艺优化

以一系列低共熔溶剂为提取剂,采用超声波辅助法从沙棘籽粕中提取多酚。在单因素试验结果基础上,利用Box-Behnken实验设计,运用响应面分析法对影响沙棘籽粕多酚得率的主要因素（超声功率、超声时间、超声温度）进行优化。结果表明,沙棘籽粕多酚最佳提取工艺条件为：以含水量为30%的氯化胆碱-草酸低共熔溶剂为最佳提取剂,液料比为14∶1,超声功率420 W,超声时间56 min,超声温度44℃。在此条件下,多酚得率为3.31±0.008%。对比试验发现：氯化胆碱-草酸低共熔溶剂对沙棘籽粕多酚的得率明显优于传统溶剂;与热回流提取相比,超声提取法具有明显的优势。     

Optimization of polysaccharides from Panax japonicus C.A. Meyer by RSM and its anti-oxidant activity

Response surface method (RSM) was used to optimize the extraction conditions of polysaccharides from the rhizomes of Panax japonicus C.A. Meyer. A three-level, three-variable Box-Behnken design (BBD) was applied for experimental design and analyzed of the results to obtain the optimal processing parameters. RSM analysis indicated good correspondence between experimental and predicted values. The optimal condition for the yield of polysaccharide was extraction time 3.74 h, extraction temperature 93.90 °C and ratio of water to raw material 40.22. Polysaccharide was analyzed by chemical methods and Fourier transform infrared (FT-IR). IR spectra indicated the presence of uronic acids and α-pyranose of the glucose residue. The antioxidant activities of Panax japonicus polysaccharides (PJP) were investigated including scavenging activity of hydrogen peroxide, 2,2-diphenyl-1-picryl-hydrazyl (DPPH) and free radicals of superoxide anion in vitro. The results of antioxidant activity exhibited PJP had a good potential for antioxidant.     

A statistical approach for optimization of R-phycoerythrin extraction from the red algae Gracilaria verrucosa by enzymatic hydrolysis using central composite design and desirability function

The aim of this research is to statistically optimize enzymatic hydrolysis parameters for the production of R-phycoerythrin (RPE) from red algae Gracilaria verrucosa. Six independent variables, incubation temperature, incubation time, ratio of buffer to raw material, cellulase loading, xylanase loading, and pH, were selected for response surface methodology studies. A central composite design was employed to maximize RPE production. A mathematical model with high determination coefficient (R ²?=?0.86) was developed and could be employed to optimize RPE extraction. The optimal extraction conditions of RPE were determined as follows: incubation temperature (48°C), incubation time (6?h), ratio of buffer to raw material (20 w/v), cellulase loading (15%), xylanase loading (5%), and pH (6.5). Under this optimal condition, the experimental yield of RPE was 6.25?mg?g^?1. Based on the result of response surface methodology and desirability function approach study, total sugar, the main by-product in RPE extraction was considered as another response. A new optimal condition was predicted as follows: incubation temperature (30°C), incubation time (12?h), ratio of buffer to raw material (20, w/v), cellulase loading (15%), xylanase loading (5%), and pH (6). Under this condition, similar RPE levels were obtained while the concentration of total sugar decreased by 40%.     

Optimisation of the solvent extraction of phenolic antioxidants from fruits of Euterpe oleracea using Response Surface Methodology

Fruits of Euterpe oleracea (FEO) are currently known as elements that present a very high antioxidant activity (AAO), as measured by the Oxygen Radical Absorbance Capacity. They are particularly rich in total phenolics (TP) and total anthocyanins (TA). Response Surface Methodology was used to optimise the solvent extraction of phenolic antioxidants from FEO, using a second-order polynomial equation to describe the experimental data for TP, TA, and AAO. In order to determine the best solid-to-liquid ratio and time of extraction, some preliminary studies were conducted. A rotatable central composite design with three variables (ethanol proportion, hydrochloric acid concentration and temperature) was then used. The results showed a good fit to the proposed model (R² > 0.89). TP and TA, as well as TA and AAO, showed significant correlations (P < 0.05). The optimised conditions that maximized the yields of phenolic compounds (TP and TA) and AAO from FEO were: ethanol proportion between 70% and 80%, hydrochloric acid concentration between 0.065 and 0.074 mol/L and a temperature of 58 °C.     

Effects of temperature on development, survival, longevity, and fecundity of the Bemisia tabaci Gennadius (Homoptera: Aleyrodidae) predator, Axinoscymnus cardilobus (Coleoptera: Coccinellidae)

Axinoscymnus cardilobus (Homoptera: Aleyrodidae) is an important predator of Bemisia tabaci (Coleoptera: Coccinellidae) that occurs in high population density of B. tabaci. Temperature among other factors is observed to play an important role in the development of arthropods. The effect of temperature on the development of A. cardilobus was studied at seven constant temperature regimes (14, 17, 20, 23, 26, 29, 32 °C). The results indicated that the duration of egg, larval and pupal stages were significantly influenced by increased temperature. The rate of development gradually increased with increase in temperature from 14 °C to 26 °C, but declined from 26 °C to 32 °C. The survival rates of different insect stages were stable at temperatures between 20 °C and 26 °C, but at extreme temperatures of 32 °C and 14 °C, a sharp decrease was evident. Ovipositional period of the female decreased when temperatures were increased from 17 °C to 32 °C. The highest fecundity of the female (225.7 eggs per female) was recorded at 23 °C. Life tables of A. cardilobus were constructed based on the experimental results at temperatures of 14–32 °C. The reproductive rate (R₀), the innate capacity for increase (r_m) and the finite rate of increase (λ) reached the maximum values at 23 °C, of 70.7, 0.059 and 1.062, respectively. The mean generation time (T) decreased with increased temperature from 17 °C to 32 °C, the highest and least values recorded at 17 °C and 32 °C were 112.7 and 38.7, respectively. These results offer valuable insight on the importation and establishment of A. cardilobus into new environments with diverse temperature regimes.     

Effect of temperature on survival, development and reproduction of the predatory lacewing Dichochrysa prasina (Neuroptera: Chrysopidae) reared on Ephestia kuehniella eggs (Lepidoptera: Pyralidae)

Preimaginal development and adult longevity and reproduction of Dichochrysa prasina Burmeister were studied at six constant temperatures (15, 20, 25, 27, 30 and 33 °C) and a photoperiod of 16:8 (L:D). Eggs of the flour moth Ephestia kuehniella (Zeller) were used as food throughout preimaginal development, whereas the adults of D. prasina fed on a liquid diet of water, yeast hydrolysate, sugar and honey. At the highest tested temperature of 33 °C no larvae completed their development. At the rest of the tested temperatures the egg to adult developmental period ranged from approximately 92 days at 15 °C to 25 days at 30 °C. Percentages of adult emergence ranged from 36% at 15 °C to 84% at 30 °C. Both adult longevity and fecundity were significantly affected by temperature and the intrinsic rate of increase (r_m) reached its maximum value at 27 °C. These results could be useful for the establishment of a small scale rearing and mass production of D. prasina.     

Effect of application rates and abiotic factors on Steinernema carpocapsae for control of overwintering navel orangeworm (Lepidoptera: Pyralidae, Amyelois transitella) in pistachios

The effect of reduced application rate, soil temperature at shallow depth (2.5 cm), and soil type on the efficacy of Steinernema carpocapsae against the navel orangeworm, Amyelois transitella, was evaluated in six field trials employing 1 m² plots conducted from November 2003 through December 2004 in Madera and Kern Counties, California. Nematodes were applied at a concentration of 100,000 infective juveniles (IJs)/m² (10⁹/ha) in a volume of 187 ml water/m² (1870 L/ha) with a post-application irrigation in all trials. Mortality ranged from 7.9 to 64.9% in successful trials and percent reduction in live larvae per plot was as high as 74.6%. Percent reduction and mortality were highly correlated (r² = 0.78) and larval reduction typically was 10–11% greater than mortality for any treatment. In one trial, although nematode treatment significantly increased mortality compared to the controls, the treatment was deemed unsatisfactory because mortality was <15%. Soil temperature in this trial rose to 39 °C within 5 h after application. Nematodes failed in two other trials when soil temperature fell below freezing (minimum temperatures −3.0, −5.5 °C, respectively) several times in a 5-day period. We conclude that a commercially feasible application volume of 1870 L water/ha followed by post-application irrigation at this same rate was effective, and that soil maximum temperature at or below 32 °C during the first 24 h after application is necessary for treatment success.     

Germination responses of Diplotaxis harra to temperature and salinity

Diplotaxis harra (Forssk.) Boiss, an annual herb in the family of Brassicaceae, is widely distributed in many sandy and gypseous areas in southern Tunisia. Laboratory experiments were carried out to assess the effects of temperature and salinity on seed germination and recovery responses after seed transfer to distilled water. The germination responses of the seeds in complete darkness were determined over a wide range of temperatures (5, 10, 15, 20, 25 and 30 °C) and salinities (0, 50, 100, 150 and 200 mM NaCl). Germination was inhibited by either an increase or decrease in temperature from the optimal temperature (15 °C). Highest germination percentages were obtained under non-saline conditions and an increase in NaCl concentrations progressively inhibited seed germination. Rate of germination decreased with an increase in salinity at all temperatures but comparatively higher rates were obtained at 15 °C. Salt stress decreased both the percentage and the rate of germination. An interaction between salinity and temperature yielded no germination at 200 mM NaCl. Seeds were transferred from salt solution to distilled water after 20 days, and those from low salinities recovered at all temperatures. At NaCl concentration of 200 mM, the recovery of germination was completely inhibited.     

Agar extraction process for Gracilaria cliftonii ()

Agar extraction process was developed for Gracilaria cliftonii by investigating the effects of various extraction variables and alkali treatments on agar yield and properties. The tested variables were soaking time, soaking temperature, seaweed to water ratio of, extraction temperatures and extraction time. Alkali treatments were carried out in alkali concentrations of 1%, 2%, 3% and 5% in a water bath at 60, 70 and 80 °C prior to agar extraction. The results showed that agar yield was significantly affected by all the tested variables. The agar yield was maximised when extraction process was carried out with 1 h soaking time at 30 °C with seaweed to water ratio of 1:150 and extracted for 3 h at 100 °C. The alkali-temperature combinations significantly influenced agar yield and properties. Irrespective of temperature, alkali treatments at 3% and 5% significantly increased the gel strength.     

Bioenergetic responses of sub-adult sea cucumber Apostichopus japonicus (Selenka) (Echinodermata: Holothuroidea) to temperature with special discussion regarding its southernmost distribution limit in China

1. This paper investigated the bioenergetic responses of the sea cucumber Apostichopus japonicus (wet weights of 36.5±1.2 g) to different water temperatures (5, 10, 15, 20, 25 and 30 °C) in the laboratory.

2. Results showed that theoretically the optimal temperatures for energy intake and scope for growth (SFG) of sub-adult A. japonicus was at 15.6 and 16.0 °C, respectively. The aestivation threshold temperature for this life-stage sea cucumber could be 29.0 °C by taking feeding cessation as the indication of aestivation.

3. Our data suggests that A. japonicus is thermo-sensitive to higher temperature, which prevents it from colonising sub-tropical coastal zones. Therefore, water temperature plays an important role in its southernmost distribution limit in China.

4. The potential impact of global ocean warming on A. japonicus might be a northward shift in the geographical distribution.