Extraction of RAPD-friendly DNA from Laminaria japonica (Phaeophyta) after enzymatic dissociation of the frozen sporophyte tissues

A new extraction protocol has been developed to obtain high quality DNAfrom Laminaria japonica, which involves enzymatic dissociation ofsporophyte tissues and subsequent elimination of the remainingpolysaccharides with cetyltrimethyl ammonium bromide. Unicells isolatedfrom frozen kelp tissues with alginate lyase prepared from the abalone Haliotis diversicolor were used to extract total DNA; the yield wasapproximately 13 to 22.5 g DNA g^-1 (wet sporophyteweight). The average size of genomic DNA was around 23 kb estimated byagarose gel electrophoresis, and the purity of total DNA determinedspectrophotometrically as the ratio of OD₂₆₀/OD₂₈₀ wasabout 1.7. The extracted kelp DNA (20–40 ng) could be usedsuccessfully as a template for polymerase chain reaction (PCR) under theoptimized conditions (100 M dNTP, 0.2 M primer, 1.0unit Taq DNA polymerase). The random amplified polymorphicDNA (RAPD) patterns were highly reproducible. These results suggest thatthe contamination by soluble polysaccharides which interferes with RAPDreproducibility was largely controlled. This RAPD-suited method for DNAextraction from kelp sporophytes using enzyme treatment providedsufficient material, and was inexpensive and convenient to carry out.     

Sulfated polysaccharides from brown seaweeds Saccharina japonica and Undaria pinnatifida: isolation, structural characteristics, and antitumor activity

During the last decade brown seaweeds attracted much attention as a source of polysaccharides, namely laminarans, alginic acids, and sulfated polysaccharides—fucoidans, with various structures and biological activities.In this study, sulfated polysaccharides were isolated from brown seaweeds Saccharina japonica (formerly named Laminaria) and Undaria pinnatifida and their antitumor activity was tested against human breast cancer T-47D and melanoma SK-MEL-28 cell lines.The sulfated polysaccharide form S. japonica was highly branched partially acetylated sulfated galactofucan, built up of (1→3)-α-l-fucose residues. The sulfated polysaccharide from U. pinnatifida was partially acetylated highly sulfated galactofucan consisting of (1→3)- or (1→3);(1→4)-α-l-fucose residues.Fucoidans from S. japonica and U. pinnatifida distinctly inhibited proliferation and colony formation in both breast cancer and melanoma cell lines in a dose-dependent manner. These results indicated that the use of sulfated polysaccharides from brown seaweeds S. japonica and U. pinnatifida might be a potential approach for cancer treatment.     

An improved method for isolating high-quality DNA from<Emphasis Type="Italic">Vitis vinifera</Emphasis> nuclei

We have developed a simple and highly efficient protocol for isolating large quantities (150–400 μg/g leaf tissue) of high-quality DNA from fresh and frozenVitis vinifera leaves. Isolated DNA is essentially free of polysaccharides, polyphenols, and other major contaminants as judged by viscosity, clear color, A_260/280 ratio, digestibility by restriction enzymes for Southern blot analysis, and PCR suitability.     

Efficient separation and purification of allophycocyanin from <Emphasis Type="Italic">Spirulina</Emphasis> (<Emphasis Type="Italic">Arthrospira</Emphasis>) <Emphasis Type="Italic">platensis</Emphasis>

Allophycocyanin (APC) is a minor component of phycobiliproteins in cyanobacteria and red algae. This paper describes a simple and inexpensive extracting method for isolating APC from Spirulina (Arthrospira) platensis with high efficiency. The crude phycobiliprotein extract was pretreated by ammonium sulfate fractionation. Then, by adding hydroxylapatite into crude phycobiliprotein extract dissolved in 20 mM phosphate buffer (pH 7.0), APC was selectively adsorbed by hydroxylapatite but C-phycocyanin (C-PC) was not. The hydroxylapatite was collected and APC was extracted from the crude phycobiliprotein extract. Then, the enriched APC was washed off from the hydroxylapatite using 100 mM phosphate buffer (pH 7.0). In this simple extracting method it was easy to remove C-PC and isolate APC in large amounts. The absorbance ratio A ₆₅₀/A ₂₈₀ of extracted APC reached 2.0. The recovery yield was 70%, representing 4.61 mg · g⁻¹ wet weight. The extracted APC could be further purified by a simple anion-exchange chromatography with a pH gradient from 5.6 to 4.0. The absorbance ratio A ₆₅₀/A ₂₈₀ of the purified APC reached 5.0, and the overall recovery yield was 43%, representing 2.83 mg · g⁻¹ wet weight. Its purity was confirmed by native polyacrylamide gel electrophoresis (PAGE) and sodium dodecyl sulfate-PAGE.     

Inducible effects of abscisic acid on sporophyte discs from Laminaria japonica Areschoug (Laminariales, Phaeophyceae)

The effects of exogenous abscisic acid (ABA;10^–7–10^–5 M), a knownplantgrowth regulator, on reproduction and growth were investigated by culturingdiscs from sporophytes of Laminaria japonica Areschoug.ABAplays a role in triggering sorus formation, and it was found that sorusformation of discs was fastest in 10^–5 M ABA. Theapplication of 10^–5 M ABA to culturing discs alsosuppressed the expansion of surface area. ABA contents in sorus and vegetativeparts of the sporophyte were determined by bioassay. The mean ABA content insorus parts obtained from sporophytes was 0.222 ± 0.053g equivalent-ABA g wet weight^–1, which wasabout five times higher than the content found in vegetative parts (0.048± 0.009 g equivalent-ABA g wetweight^–1). Taken together these results suggest that sorusdevelopment requires an elevated level of ABA and is associated with decreasingvegetative growth and that the ABA level of the sporophyte may play a crucialrole in reproduction.     

Genomic DNA extraction from<Emphasis Type="Italic">Victoria amazonica</Emphasis>

DNA extraction is difficult in many plants because of metabolites that interfere with DNA isolation procedures and subsequent applications such as DNA restriction, amplification, and cloning. We developed the first reliable and efficient method for isolatingVictoria amazonica genomic DNA that is free from polysaccharides and polyphenols. This protocol uses 1.5 M NaCl, 2% polyvinylpyrrolidone (PVP) (Mr 1000), 5% mercaptoethanol, 0.12% sodium sulfite, and an incubation at 65°C for 4 h. The purity of isolated genomic DNA was confirmed by means of high-performance liquid chromatography (HPLC) profile and spectrophotometric analyses (A_260/230 ratio of 1.836, A_260/280 of 1.842). DNA was obtained in the amount of 387 μg per gram of leaf material, and it proved amenable to restriction digestion.     

A simple protocol for isolating genomic DNA from chestnut rose (<Emphasis Type="Italic">Rosa roxburghii</Emphasis> tratt) for RFLP and PCR analyses

Isolation of high-quality DNA from rosaceous species is particularly difficult because of their high levels of polyphenols, polysaccharides, and other compounds. The yields and quality of genomic DNA are considerably affected when the common protocol for DNA isolation is applied to the chestnut rose (Rosa roxburghii Tratt). A simple, rapid, and efficient protocol for the extraction of DNA from the chestnut rose is described. The modified hexadecyltrimethylammonium bromide (CTAB) procedure, which uses phenol-absent extraction to enhance the yield, involves a washing step before extraction for the removal of organic molecules and excessive water; the use of high concentrations of polyvinylpyrrolidone (2% [w/v]), CTAB (3% [w/v]), and β-mercaptoethanol (3% [v/v]) in the high-salt-concentration extraction buffer to remove polyphenols and polysaccharides; and the combined use of potassium acetate and chloroform to remove proteins and polysaccharides. Finally, DNA is precipitated with an equal volume of isopropanol and 0.1 vol of sodium acetate. This protocol results in high yields of DNA. The average yield of DNA ranged from 980–1800 μg/g of fresh weight of leaves. Downstream results indicate that DNA quality is sufficient for restriction fragment length polymorphism (RFLP) and polymerase chain reaction (PCR) analyses.     

Isolation, purification and characteristics of R-phycoerythrin from a marine macroalga Heterosiphonia japonica

R-phycoerythrin is one of the three phycobiliproteins which are extensively employed as fluorescent probes, and it is prepared from red macroalgae. Phycobiliproteins in the marine red macroalga Heterosiphonia japonica were extracted in 50 mM phosphate buffer (pH 7.0) and precipitated by salting-out. The R-phycoerythrin was isolated by gel filtration with Sepharose CL-4B and Sephadex G-200. Then it was purified by ion exchange chromatography on DEAE Sepharose Fast Flow which was developed by linear ionic strength gradients. The purified R-phycoerythrin gave a ratio of A₅₆₅ to A₂₈₀ of 4.89. It showed a single band and a pI of 4.8 on the examination by polyacrylamide gel electrophoresis (PAGE) and isoelectric focusing. The polypeptide analysis of the purified R-phycoerythrin by SDS–PAGE demonstrated that it contains four chromophore-carrying subunits and no colorless polypeptide and has two hexameric aggregates. The preparative procedures of the R-phycoerythrin purification established based on the experiments exhibit advantages and can offer a reference for R-phycoerythrin preparation from other marine red macroalga.     

Ploidy chimeras induced in haploid sporophytes of <Emphasis Type="Italic">Osmunda claytoniana</Emphasis> and <Emphasis Type="Italic">Osmunda japonica</Emphasis>

Haploid sporophytes of Osmunda claytoniana (2n = x = 22) were apogamously produced from calli when cultivated on a hormone-free medium. Flow cytometric analysis showed that ploidy chimeras were spontaneously produced in a haploid sporophyte of O. claytoniana and those of O. japonica that were obtained in the previous study. In the haploid sporophyte of O. claytoniana, a diploid pinnule and a partially diploid terminal segment were produced in a haploid pinna. In O. japonica, a haploid sporophyte yielded a diploid pinna in a haploid frond, and another haploid sporophyte yielded a diploid pinnule in a haploid pinna. Diploid chimeras were large in size and could be readily distinguished from other haploid parts of the fronds. It is likely that the chimeras were produced clonally from a single diploid cell that established chromosome doubling.     

Improved RNA isolation from Laminaria japonica Aresch (Laminariaceae, Phaeophyta)

RNA isolation is difficult in some plants and algae because phenolics, polysaccharides, or other compounds can bind or co-precipitate with RNA, and because the success of RNA isolation can be strain-specific and species-specific. To create an improved RNA isolation protocol for Laminaria japonica Aresch (Laminariaceae, Phaeophyta), four methods for extracting RNA were tested. A cetyltrimethylammonium bromide (CTAB)-based RNA extraction protocol was developed that clearly showed 28S and 18S ribosomal RNA bands and produced RNA with high yield (68 μg g⁻¹ fresh weight) and high quality (A _260/280 ratio 1.96 ± 0.05). The isolated RNA was intact, and RT-PCR analysis confirmed that further molecular application is feasible.     

Purification of High-quality Plastid DNA from the Brown Alga Laminaria japonica Sporophytes

Extracting DNA from a variety of algae is rather difficult because of high levels of polysaccharides, tannins, and phenolics as these interfere with DNA isolation and downstream applications. High-quality plastid DNA (ptDNA) purification is particularly difficult because of its small proportion in total genomic DNA. This report describes an improved protocol for ptDNA purification that efficiently produces high-quality ptDNA from sporophytes of Laminaria japonica and several other algae. This improved protocol simplifies procedures for ptDNA purification and improves yield to 150–200 μg of ptDNA per 100 g of frozen algal tissue. Polymerase chain reaction (PCR) amplification of conserved sequences has been used to verify purity of the ptDNA product.     

Microprojectile bombardment of <Emphasis Type="Italic">Laminaria japonica</Emphasis> gametophytes and rapid propagation of transgenic lines within a bubble-column bioreactor

A human acidic fibroblast growth factor gene, hafgf, was successfully transferred into Laminaria japonica (kelp) gametophytes via microprojectile bombardment using the biolistic PDS-1000/He gene gun. Following phosphinothricin screening, PCR detection and Southern blot analysis, transgenic L. japonica gametophytes were cultivated in an illuminated bubble-column bioreactor to optimize growth conditions. A maximal final dry cell density of 1,695 mg l⁻¹ was obtained in a batch culture having an initial dry cell density of 129.75 mg l⁻¹. This was achieved using an aeration rate of 1.08 l air min⁻¹ l⁻¹ culture in a medium containing 1.5 mM inorganic nitrate and 0.15 mM phosphate. In addition, the relationship between different nitrogen sources and growth of transgenic gametophytes indicated that both urea and sodium nitrate were effective nitrogen sources for cell growth, while ammonium ions inhibited growth of these gametophytes.     

Efficient isolation of high quality nucleic acids from different tissues of <Emphasis Type="Italic">Taxus baccata</Emphasis> L.

Improved and efficient methods were developed for isolating high quality DNA and RNA from different sources of Iranian Yew (Taxus baccata L.). The methods were based on CTAB extraction buffer added with high levels of polyvinylpyrrolidone (PVP) and β-mercaptoethanol to properly remove polysaccharides and prevent oxidation of phenolics. The pellets obtained by ethanol precipitation were washed only with Chloroform: isoamyl alcohol (24:1). So, we could successfully eliminate the dangerous phenol/chloroform extraction steps from the isolation procedure. Both spectrophotometric (A₂₆₀/A₂₈₀ and A₂₆₀/A₂₃₀ ratios) and agarose electrophoresis analysis of isolated nucleic acids (DNA and RNA) indicated good results. DNA with the average yield of 100–300 μg/g leaf and stem tissue and total RNA with an average yield of 20–30 μg/g cell culture and 80–100 μg/g leaf and stem tissue of Iranian yew could be obtained. Successful amplification of pam and pds by PCR and RT-PCR, showed the integrity of isolated DNA and RNA, respectively.     

Diffusion of Fe(II) from an iron propagation cage and its effect on tissue iron and pigments of macroalgae on the cage

Iron propagation cages were settled on sand and/or rock beds in coastal areas of Hokkaido. The cage was oxidized by dissolved oxygen and the released Fe(II) diffused into the seawater around the cage. Fe(II) concentrations in the range of 10–50 nM were detected within a 20-m distance around the cage. For comparison, in the Japan Sea, the total iron concentration is less than 2 nM.Laminaria japonica was grown in an indoor semi-continuous culture system. The critical Fe level for maintaining maximum growth, and the subsistence Fe level for survival were measured. The concentrations obtained were 14–21 and 8 g Fe g^–1 tissue, respectively. Iron found inL. japonica growing on rocks and/or rock beds in the Japan Sea was close to the subsistence level. However, the Fe level inL. japonica on the cage in the Japan Sea was considerably higher. The concentrations of chlorophyll-a and fucoxanthin collected from the cage were significantly higher for sporophytes, demonstrating that iron is a very important element for the growth of seaweeds.     

Regeneration from Laminaria japonica Areschoug (Laminariales, Phaeophyceae) protoplasts isolated with bacterial alginase

Summary The conditions for effective isolation of viable protoplasts from Laminaria japonica with an alginase produced by marine bacterium Alteromonas sp. and a commercially available cellulase were investigated. The highest yields of viable protoplasts (7.910.4x10⁶ cells g^–1 FW) were obtained with a hypertonic solution containing 50 % seawater, 25 mM MgCl₂, 5 mM HEPES buffer system, and 0.5 M mannitol. Protoplasts were not obtained from thalli of L. japonica when an abalone alginase (abalone acetone powder; AAP: Sigma) was used instead of the bacterial alginase. The isolated protoplasts were cultured in an PESI medium at 5 °C. Complete cell wall formation was observed within 7 days, and dividing cells were first observed in a 9-day-old culture. Some protoplasts regenerated into sheet-shaped thalli and rhizoid structures were also observed on some thalli after 30 to 40 days in culture. This is the first report of protoplast regeneration into plantlets of L. japonica Areschoug (Laminariales, Phaeophyceae).Abbreviations FW Flesh weight - AAP Abalone acetone powder - HEPES N-2-hydroxy-ethylpiperazine-N-2-ethanesulfonic acid - Tris Tris(hyrdoxymethyl)aminomethane - PESI Provasoli's enriched seawater with iodine     

Somatic embryogenesis and plant regeneration from immature zygotic embryos of<Emphasis Type="Italic"> Cryptomeria japonica</Emphasis> D. Don

This report describes the successful plant regeneration via somatic embryogenesis from immature zygotic embryos of Cryptomeria japonica D. Don. For the induction of embryogenic tissue, we determined that the optimal medium contained N⁶-benzyladenine and 2,4-dichlorophenoxyacetic acid. Immature zygotic embryos that were collected at the end of June yielded embryogenic tissue at the highest frequency. Embryogenic tissues that had proliferated in liquid medium included small and loosely packed cells and elongating or elongated cells. We used ten cell lines to determine the optimal medium for the development of somatic embryos. Induced somatic embryos germinated with synchronous sprouting of cotyledons, hypocotyls and roots. Gibberellin A₃ in the germination medium had a positive effect on both the elongation of hypocotyls and the survival of seedlings. The frequencies of induction and germination of somatic embryos differed among the cell lines examined. Most of the seedlings grew normally. This system of somatic embryogenesis required 4–5 months for the regeneration of C. japonica plantlets from immature zygotic embryos.Abbreviations ABA Abscisic acid - BA N⁶-Benzyladenine - 2,4-D 2,4-Dichlorophenoxyacetic acid - GA₃ Gibberellin A₃Communicated by F. Sato     

Optimization of extraction process of Glycyrrhiza glabra polysaccharides by response surface methodology

Experimental design was used to investigate the effect of three parameters (extraction time, extraction number and ratio of water to raw material) on polysaccharides yields. The ranges of the factors investigated were 3.5–4.5 h for extraction time (X₁), 4–6 for extraction number (X₂), and 25–35 for ratio of water to raw material (X₃). The statistical analysis of the experiment indicated that extraction time and ratio of water to raw material had significant effect on Glycyrrhiza glabra polysaccharides yields. The central composite design showed that polynomial regression models were in good agreement with the experimental results with the coefficients of determination of 0.924 for Glycyrrhiza glabra polysaccharides yield. The optimal condition for Glycyrrhiza glabra polysaccharides yield within the experimental range of the variables studied was at 4.3 h, 6, and 35. At this condition, the predicted yield of polysaccharides extracted was 3.6%.     

Essential amino acids of starch synthase IIa differentiate amylopectin structure and starch quality between <Emphasis Type="Italic">japonica</Emphasis> and <Emphasis Type="Italic">indica</Emphasis> rice varieties

Four amino acids were variable between the ‘active’ indica-type and ‘inactive’ japonica-type soluble starch synthase IIa (SSIIa) of rice plants; Glu-88 and Gly-604 in SSIIa of indica-cultivars IR36 and Kasalath were replaced by Asp-88 and Ser-604, respectively, in both japonica cultivars Nipponbare and Kinmaze SSIIa, whereas Val-737 and Leu-781 in indica SSIIa were replaced by Met-737 in cv. Nipponbare and Phe-781 in cv. Kinmaze SSIIa, respectively. The SSIIa gene fragments shuffling experiments revealed that Val-737 and Leu-781 are essential not only for the optimal SSIIa activity, but also for the capacity to synthesize indica-type amylopectin. Surprisingly, however, a combination of Phe-781 and Gly-604 could restore about 44% of the SSIIa activity provided that Val-737 was conserved. The introduction of the ‘active’ indica-type SSIIa gene enabled the japonica-type cv. Kinmaze to synthesize indica-type amylopectin. The starch in the transformed japonica rice plants exhibited gelatinization-resistant properties that are characteristic of indica-rice starch. Transformed lines expressing different levels of the IR36 SSIIa protein produced a variety of starches with amylopectin chain-length distribution patterns that correlated well with their onset temperatures of gelatinization. The present study confirmed that the SSIIa activity determines the type of amylopectin structure of rice starch to be either the typical indica-type or japonica-type, by playing a specific role in the synthesis of the long B₁ chains by elongating short A and B₁ chains, notwithstanding the presence of functional two additional SSII genes, a single SSI gene, two SSIII genes, and two SSIV genes in rice plants.     

Isolation of RNA of high quality and yield from <Emphasis Type="BoldItalic">Ginkgo biloba</Emphasis> leaves

An improved protocol was developed to isolate total RNA in good yield and integrity from Ginkgo biloba leaves containing high levels of flavonoid glycosides, terpene lactones, carbohydrates and polyphenolic secondary metabolites. Polyvinylpolypyrrolidone at 2% and β-mercaptoethanol at 4% were added to the standard CTAB extraction buffer and, after chloroform and phenol extraction, the pellet obtained by ethanol/acetate precipitation was washed and a second phenol/chloroform extraction was introduced to remove co-precipitated polysaccharides. Both A₂₆₀/A₂₃₀ and A₂₆₀/A₂₈₀ absorbancy ratios of isolated RNA were around 2 and the yield was about 0.4 mg g^--1 fresh weight. At least seven distinct rRNA bands were detected by denaturing gel electrophoresis. Sharp hybridization signals were obtained from Northern blots with both nuclear and plastid gene probes. Two gene fragments: nuclear-encoded cab and chloroplast encoded rbcL were successfully amplified by RT-PCR, suggesting the integrity of isolated RNA. The total RNA isolated by this protocol is of sufficient quality for subsequent molecular applications.