Effect of the DnaK chaperone on the conformational quality of JCV VP1 virus‐like particles produced in Escherichia coli

Protein nanoparticles such as virus‐like particles (VLPs) can be obtained by recombinant protein production of viral capsid proteins and spontaneous self‐assembling in cell factories. Contrarily to infective viral particles, VLPs lack infective viral genome while retaining important viral properties like cellular tropism and intracellular delivery of internalized molecules. These properties make VLPs promising and fully biocompatible nanovehicles for drug delivery. VLPs of human JC virus (hJCV) VP1 capsid protein produced in Escherichia coli elicit variable hemagglutination properties when incubated at different NaCl concentrations and pH conditions, being optimal at 200 mM NaCl and at pH range between 5.8 and 7.5. In addition, the presence or absence of chaperone DnaK in E. coli cells influence the solubility of recombinant VP1 and the conformational quality of this protein in the VLPs. The hemagglutination ability of hJCV VP1 VLPs contained in E. coli cell extracts can be modulated by buffer composition in the hemagglutination assay. It has been also determined that the production of recombinant hJCV VP1 in E. coli is favored by the absence of chaperone DnaK as observed by Western Blot analysis in different E. coli genetic backgrounds, indicating a proteolysis targeting role for DnaK. However, solubility is highly compromised in a DnaK^? E. coli strain suggesting an important role of this chaperone in reduction of protein aggregates. Finally, hemagglutination efficiency of recombinant VP1 is directly related to the presence of DnaK in the producing cells. © 2014 American Institute of Chemical Engineers Biotechnol. Prog., 30:744–748, 2014     

Mutational analysis of the carboxyl-terminal region of the SV40 major capsid protein VP1

Virus-like particles (VLPs), a promising next-generation drug delivery vehicle, can be formed in vitro using a recombinant viral capsid protein VP1 from SV40. Seventy-two VP1 pentamers interconnect to form the T = 7d lattice of SV40 capsids, through three types of C-terminal interactions, alpha-alpha'-alpha', beta-beta' and gamma-gamma. These appear to require VP1 conformational switch, which involve in particular the region from amino acids 301-312 (herein Region I). Here we show that progressive deletions from the C-terminus of VP1, up to 34 amino acids, cause size and shape variations in the resulting VLPs, including tubular formation, whereas deletions beyond 34 amino acids simply blocked VP1 self-assembly. Mutants carrying in Region I point mutations predicted to disrupt alpha-alpha'-alpha'-type and/or beta-beta'-type interactions formed small VLPs resembling T = 1 symmetry. Chimeric VP1, in which Region I of SV40 VP1 was substituted with the homologous region from VP1 of other polyomaviruses, assembled only into small VLPs. Together, our results show the importance of the integrity of VP1 C-terminal region and the specific amino acid sequences within Region I in the assembly of normal VLPs. By understanding how to alter VLP sizes and shapes contributes to the development of drug delivery systems using VLPs.     

Yeast cells allow high-level expression and formation of polyomavirus-like particles

Polyomavirus-derived virus-like particles (VLPs) have been described as potential carriers for encapsidation of nucleic acids in gene therapy. Although VLPs can be generated in E. coli or insect cells, the yeast expression system should be advantageous as it is well established for the biotechnological generation of products for human use, especially because they are free of toxins hazardous for humans. We selected the yeast Saccharomyces cerevisiae for expression of the major capsid protein VP1 of a non-human polyomavirus, the hamster polyomavirus (HaPV). Two entire HaPV VP1-coding sequences, starting with the authentic and a second upstream ATG, respectively, were subcloned and expressed to high levels in Saccharomyces cerevisiae. The expressed VP1 assembled spontaneously into VLPs with a structure resembling that of the native HaPV capsid. Determination of the subcellular localization revealed a nuclear localization of some particles formed by the N-terminally extended VP1, whereas particles formed by the authentic VP1 were found mainly in the cytoplasmic compartment.     

Characterization of virus-like particles produced by the expression of rotavirus capsid proteins in insect cells.

Rotaviruses are triple-layered particles that contain four major capsid proteins, VP2, VP4, VP6, and VP7, and two minor proteins, VP1 and VP3. We have cloned each of the rotavirus genes coding for a major capsid protein into the baculovirus expression system and expressed each protein in insect cells. Coexpression of different combinations of the rotavirus major structural proteins resulted in the formation of stable virus-like particles (VLPs). The coexpression of VP2 and VP6 alone or with VP4 resulted in the production of VP2/6 or VP2/4/6 VLPs, which were similar to double-layered rotavirus particles. Coexpression of VP2, VP6, and VP7, with or without VP4, produced triple-layered VP2/6/7 or VP2/4/6/7 VLPs, which were similar to native infectious rotavirus particles. The VLPs maintained the structural and functional characteristics of native particles, as determined by electron microscopic examination of the particles, the presence of nonneutralizing and neutralizing epitopes on VP4 and VP7, and hemagglutination activity of the VP2/4/6/7 VLPs. The production of VP2/4/6 particles indicated that VP4 interacts with VP6. Cell binding assays performed with each of the VLPs indicated that VP4 is the viral attachment protein. Chimeric particles containing VP7 from two different G serotypes also were obtained. The ability to express individual proteins or to coexpress different subsets of proteins provides a system with which to examine the interactions of the rotavirus structural proteins, the role of individual proteins in virus morphogenesis, and the feasibility of a subunit vaccine.     

Engineering of SV40-based nano-capsules for delivery of heterologous proteins as fusions with the minor capsid proteins VP2/3

The capsid of SV40 is regarded as a potential nano-capsule for delivery of biologically active materials. The SV40 capsid is composed of 72 pentamers of the VP1 major capsid protein and 72 copies of the minor coat proteins VP2/3. We have previously demonstrated that, when expressed in insect Sf9 cells by the baculovirus system, VP1 self-assembles into virus-like particles (VP1-VLPs), which are morphologically indistinguishable from the SV40 virion and can be easily purified. Here, we show that heterologous proteins fused to VP2/3 can be efficiently incorporated into the VP1-VLPs. Using EGFP as a model protein, we have optimized this encapsulation system and found that fusion to the C-terminus of VP2/3 is preferable and that the C-terminal VP1-interaction domain of VP2/3 is sufficient for incorporation into VLPs. The VLPs encapsulating EGFP retain the ability to attach to the cell surface and enter the cells. Using this system, we have encapsulated yeast cytosine deaminase (yCD), a prodrug-modifying enzyme that converts 5-fluorocytosine to 5-fluorouracil, into VLPs. When CV-1 cells are challenged by the yCD-encapsulating VLPs, they become sensitive to 5-fluorocytosine-induced cell death. Therefore, proteins of interest can be encapsulated in VP1-VLPs by fusion to VP2/3 and successfully delivered to cells.     

Immunogenicity and virus-like particle formation of rotavirus capsid proteins produced in transgenic plants

The human pathogen, group A rotavirus, is the most prevalent cause of acute infantile and pediatric gastroenteritis worldwide, especially in developing countries. There is an urgent demand for safer, more effective and cheaper vaccines against rotavirus infection. Plant-derived antigens may provide an exclusive way to produce economical subunit vaccines. Virus-like particles, constituting viral capsid proteins without viral nucleic acids, are considered a far safer candidate compared with live attenuated viral vaccines. In this study, the rotavirus capsid proteins VP2, VP6 and VP7 were co-expressed in transgenic tobacco plants, and their expression levels, formation of rotavirus-like particles (RV VLPs) and immunogenicity were extensively studied. Quantitative real-time RT-PCR and Western blot analysis revealed that the expression level of vp6 was the highest while vp7 was expressed at the lowest levels. The RV VLPs were purified from transgenic tobacco plants and analyzed by electron microscopy and Western blot. Results indicated that the plant-derived VP2, VP6 and VP7 proteins self-assembled into 2/6 or 2/6/7 RV VLPs with a diameter of 60–80 nm. When orally delivered into mice with cholera toxin as an adjuvant, the total soluble protein extracted from transgenic tobacco plants induced rotavirus-specific antibodies comparable with those of attenuated rotavirus vaccines, while VP 2/6/7 induced higher serum IgG and fecal IgA titers compared with VP 2/6.     

Characterization and replicase activity of double-layered and single-layered rotavirus-like particles expressed from baculovirus recombinants.

Rotavirus has a capsid composed of three concentric protein layers. We coexpressed various combinations of the rotavirus structural proteins of single-layered (core) and double-layered (single-shelled) capsids from baculovirus vectors in insect cells and determined the ability of the various combinations to assemble into viruslike particles (VLPs). VLPs were purified by centrifugation, their structure was examined by negative-stain electron microscopy, their protein content was determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and GTP binding assays, and their ability to support synthesis of negative-strand RNAs on positive-sense template RNAs was determined in an in vitro replication system. Coexpression of all possible combinations of VP1, VP2, VP3, and VP6, the proteins of double-layered capsids, resulted in the formation of VP1/2/3/6, VP1/2/6, VP2/3/6, and VP2/6 double-layered VLPs. These VLPs had the structural characteristics of empty rotavirus double-layered particles and contained the indicated protein species. Only VPI/2/3/6 and VP1/2/6 particles supported RNA replication. Coexpression of all possible combinations of VPl, VP2, and VP3, the proteins of single-layered capsids, resulted in the formation of VP1/2/3, VP1/2, VP2/3, and VP2 single-layered VLPs. These VLPs had the structural characteristics of empty single-layered rotavirus particles and contained the indicated protein species. Only VP1/2/3 and VP1/2 VLPs supported RNA replication. We conclude that (i) the assembly of VP1 and VP3 into VLPs requires the presence of VP2, (ii) the role of VP2 in the assembly of VP1 and VP3 and in replicase activity is most likely structural, (iii) VP1 is required and VP3 is not required for replicase activity of VLPs, and (iv) VP1/2 VLPs constitute the minimal replicase particle in the in vitro replication system.     

Gene transfer using recombinant rabbit hemorrhagic disease virus capsids with genetically modified DNA encapsidation capacity by addition of packaging sequences from the L1 or L2 protein of human papillomavirus type 16

The aim of this study was to produce gene transfer vectors consisting of plasmid DNA packaged into virus-like particles (VLPs) with different cell tropisms. For this purpose, we have fused the N-terminally truncated VP60 capsid protein of the rabbit hemorrhagic disease virus (RHDV) with sequences which are expected to be sufficient to confer DNA packaging and gene transfer properties to the chimeric VLPs. Each of the two putative DNA-binding sequences of major L1 and minor L2 capsid proteins of human papillomavirus type 16 (HPV-16) were fused at the N terminus of the truncated VP60 protein. The two recombinant chimeric proteins expressed in insect cells self-assembled into VLPs similar in size and appearance to authentic RHDV virions. The chimeric proteins had acquired the ability to bind DNA. The two chimeric VLPs were therefore able to package plasmid DNA. However, only the chimeric VLPs containing the DNA packaging signal of the L1 protein were able efficiently to transfer genes into Cos-7 cells at a rate similar to that observed with papillomavirus L1 VLPs. It was possible to transfect only a very limited number of RK13 rabbit cells with the chimeric RHDV capsids containing the L2-binding sequence. The chimeric RHDV capsids containing the L1-binding sequence transfer genes into rabbit and hare cells at a higher rate than do HPV-16 L1 VLPs. However, no gene transfer was observed in human cell lines. The findings of this study demonstrate that the insertion of a DNA packaging sequence into a VLP which is not able to encapsidate DNA transforms this capsid into an artificial virus that could be used as a gene transfer vector. This possibility opens the way to designing new vectors with different cell tropisms by inserting such DNA packaging sequences into the major capsid proteins of other viruses.     

Processing of infectious bursal disease virus (IBDV) polyprotein and self-assembly of IBDV-like particles in Hi-5 cells

The capsid of infectious bursal disease virus (IBDV), with a size of 60-65 nm, is formed by an initial processing of polyprotein (pVP2-VP4-VP3) by VP4, subsequent assemblage of pVP2 and VP3, and the maturation of VP2. In Sf9 cells, the processing of polyprotein expressed was restrained in the stage of VP2 maturation, leading to a limited production of capsid, i.e., IBDV-like particles (VLPs). In the present study, another insect cell line, High-Five (Hi-5) cells, was demonstrated to efficiently produce VLPs. Meanwhile, in this system, polyprotein was processed to pVP2 and VP3 protein and pVP2 was further processed to the matured form of VP2. Consequently, Hi-5 cells are better in terms of polyprotein processing and formation of VLPs than Sf9. In addition to the processing of pVP2, VP3 was also degraded. With insufficient intact VP3 protein present for the formation of VLPs, the excessive VP2 form subviral particles (SVPs) with a size of about 25 nm. The ratio of VLPs to SVPs is dependent on the multiplicity of infections (MOIs) used, and an optimal MOI is found for the production of both particles. VLPs were separated from SVPs with a combination of ultracentrifugation and gel-filtration chromatography, and a large number of purified particles of both were obtained. In conclusion, the insect cell lines and MOIs were optimized for the production of VLPs, and pure VLPs with morphology similar to that of the wild-type viruses can be effectively prepared. The efficient production and purification of VLPs benefits not only the development of an antiviral vaccine against IBDV but also the understanding of the structure of this avian virus that is economically important.     

Self-assembly of virus-like particles of canine parvovirus capsid protein expressed from Escherichia coli and application as virus-like particle vaccine

Canine parvovirus disease is an acute infectious disease caused by canine parvovirus (CPV). Current commercial vaccines are mainly attenuated and inactivated; as such, problems concerning safety may occur. To resolve this problem, researchers developed virus-like particles (VLPs) as biological nanoparticles resembling natural virions and showing high bio-safety. This property allows the use of VLPs for vaccine development and mechanism studies of viral infections. Tissue-specific drug delivery also employs VLPs as biological nanomaterials. Therefore, VLPs derived from CPV have a great potential in medicine and diagnostics. In this study, small ubiquitin-like modifier (SUMO) fusion motif was utilized to express a whole, naturalVP2 protein of CPV in Escherichia coli. After the cleavage of the fusion motif, the CPV VP2 protein has self-assembled into VLPs. The VLPs had a size and shape that resembled the authentic virus capsid. However, the self-assembly efficiency of VLPs can be affected by different pH levels and ionic strengths. The mice vaccinated subcutaneously with CPV VLPs and CPV-specific immune responses were compared with those immunized with the natural virus. This result showed that VLPs can effectively induce anti-CPV specific antibody and lymphocyte proliferation as a whole virus. This result further suggested that the antigen epitope of CPV was correctly present on VLPs, thereby showing the potential application of a VLP-based CPV vaccine.     

The maturation process of pVP2 requires assembly of infectious bursal disease virus capsids

Infectious bursal disease virus (IBDV) is a nonenveloped avian virus with a two-segment double-stranded RNA genome. Its T=13 icosahedral capsid is most probably assembled with 780 subunits of VP2 and 600 copies of VP3 and has a diameter of about 60 nm. VP1, the RNA-dependent RNA polymerase, resides inside the viral particle. Using a baculovirus expression system, we first observed that expression of the pVP2-VP4-VP3 polyprotein encoded by the genomic segment IBDA results mainly in the formation of tubules with a diameter of about 50 nm and composed of pVP2, the precursor of VP2. Very few virus-like particles (VLPs) and VP4 tubules with a diameter of about 25 nm were also identified. The inefficiency of VLP assembly was further investigated by expression of additional IBDA-derived constructs. Expression of pVP2 without any other polyprotein components results in the formation of isometric particles with a diameter of about 30 nm. VLPs were observed mainly when a large exogeneous polypeptide sequence (the green fluorescent protein sequence) was fused to the VP3 C-terminal domain. Large numbers of VLPs were visualized by electron microscopy, and single particles were shown to be fluorescent by standard and confocal microscopy analysis. Moreover, the final maturation process converting pVP2 into the VP2 mature form was observed on generated VLPs. We therefore conclude that the correct scaffolding of the VP3 can be artificially induced to promote the formation of VLPs and that the final processing of pVP2 to VP2 is controlled by this particular assembly. To our knowledge, this is the first report of the engineering of a morphogenesis switch to control a particular type of capsid protein assembly.     

Roles of disulfide linkage and calcium ion-mediated interactions in assembly and disassembly of virus-like particles composed of simian virus 40 VP1 capsid protein

The simian virus 40 capsid is composed of 72 pentamers of VP1 protein. Although the capsid is known to dissociate to pentamers in vitro following simultaneous treatment with reducing and chelating agents, the functional roles of disulfide linkage and calcium ion-mediated interactions are not clear. To elucidate the roles of these interactions, we introduced amino acid substitutions in VP1 at cysteine residues and at residues involved in calcium binding. We expressed the mutant proteins in a baculovirus system and analyzed both their assembly into virus-like particles (VLPs) in insect cells and the disassembly of those VLPs in vitro. We found that disulfide linkages at both Cys-9 and Cys-104 conferred resistance to proteinase K digestion on VLPs, although neither linkage was essential for the formation of VLPs in insect cells. In particular, reduction of the disulfide linkage at Cys-9 was found to be critical for VLP dissociation to VP1 pentamers in the absence of calcium ions, indicating that disulfide linkage at Cys-9 prevents VLP dissociation, probably by increasing the stability of calcium ion binding. We found that amino acid substitutions at carboxy-terminal calcium ion binding sites (Glu-329, Glu-330, and Asp-345) resulted in the frequent formation of unusual tubular particles as well as VLPs in insect cells, indicating that these residues affect the accuracy of capsid assembly. In addition, unexpectedly, amino acid substitutions at any of the calcium ion binding sites tested, especially at Glu-157, resulted in increased stability of VLPs in the absence of calcium ions in vitro. These results suggest that appropriate affinities of calcium ion binding are responsible for both assembly and disassembly of the capsid.     

N端融合外源蛋白的兔出血症病毒衣壳蛋白自聚能力的研究

将兔出血症病毒衣壳蛋白VP6 0基因插入杆状病毒转移载体pBLUEBACHIS2_B的 6 HIS表达标签下游 ,与线性化野生型杆状病毒基因组DNA共转染Sf9昆虫细胞 ,经蚀斑纯化后获克隆化重组杆状病毒pBLUEBACHIS2B_VP6 0。以重组杆状病毒感染Sf9细胞 ,经SDS_PAGE和Westernblot检测显示高效表达一分子量为 6 9kD的重组蛋白 ,并且该蛋白可被兔抗RHDV高免血清识别。血凝试验表明 ,该重组蛋白可以凝集人“O”型红细胞 ,血凝价达 2 1 6 ,同时 ,该血凝性可被抗RHDV的高免血清所抑制。经电镜观察 ,重组病毒表达的融合有 6 HIS表达标签的衣壳蛋白仍可在昆虫细胞内自聚成不包裹核酸的、与天然RHDV病毒粒子在物理形态上相似的病毒样颗粒 (VLPs) ,并且该VLPs与兔抗RHDV高免血清作用后于电镜下可见凝集成团的现象 ,表明其与天然RHDV病毒粒子在抗原性上也极为相似     

Production of FMDV virus-like particles by a SUMO fusion protein approach in Escherichia coli

Virus-like particles (VLPs) are formed by the self-assembly of envelope and/or capsid proteins from many viruses. Some VLPs have been proven successful as vaccines, and others have recently found applications as carriers for foreign antigens or as scaffolds in nanoparticle biotechnology. However, production of VLP was usually impeded due to low water-solubility of recombinant virus capsid proteins. Previous studies revealed that virus capsid and envelope proteins were often posttranslationally modified by SUMO in vivo, leading into a hypothesis that SUMO modification might be a common mechanism for virus proteins to retain water-solubility or prevent improper self-aggregation before virus assembly. We then propose a simple approach to produce VLPs of viruses, e.g., foot-and-mouth disease virus (FMDV). An improved SUMO fusion protein system we developed recently was applied to the simultaneous expression of three capsid proteins of FMDV in E. coli. The three SUMO fusion proteins formed a stable heterotrimeric complex. Proteolytic removal of SUMO moieties from the ternary complexes resulted in VLPs with size and shape resembling the authentic FMDV. The method described here can also apply to produce capsid/envelope protein complexes or VLPs of other disease-causing viruses.     

Disulfide bonds stabilize JC virus capsid-like structure by protecting calcium ions from chelation

To investigate the role of disulfide bonds in the capsid structure, a recombinant JC virus-like particle (VLP) was used. The major capsid protein, VP1, of the JC virus was expressed in yeast cells. The yeast-expressed VP1 was self-assembled into a VLP. Disulfide bonds were found in the VLP which caused dimeric and trimeric VP1 linkages as demonstrated by non-reducing SDS–PAGE. The VLP remained intact when disulfide bonds were reduced by dithiothreitol. The VLP without disulfide bonds could be disassembled into capsomeres by EGTA alone, but those with disulfide bonds could not be disassembled by EGTA. Capsomeres were reassembled into VLPs in the presence of calcium ions. Capsomeres formed irregular aggregations instead of VLPs when treated with diamide to reconstitute the disulfide bonds. These results indicate that disulfide bonds play an important role in maintaining the integrity of the JC VLP by protecting calcium ions from chelation.     

Identification of domains in canine parvovirus VP2 essential for the assembly of virus-like particles.

Canine parvovirus capsids are composed of 60 copies of VP2 and 6 to 10 copies of VPl. To locate essential sites of interaction between VP2 monomers, we have analyzed the effects of a number of VP2 deletion mutants representing the amino terminus and the four major loops of the surface, using as an assay the formation of virus-like particles (VLPs) expressed by recombinant baculoviruses. For the amino terminus we constructed three mutants with progressively larger deletions, i.e., 9, 14, and 24 amino acids. Deletions of 9 and 14 amino acids did not affect the morphology and assembly capabilities of the mutants. However, the mutant with the 24-amino-acid deletion did not show hemagglutination properties or correct VLP morphology, stressing again the relevance of the RNER domain in canine parvovirus functionality. Three of the four mutants with deletions in the loops failed to make correct VLPs, indicating that these regions are essential for correct capsid assembly and morphology. Only the mutant with the deletion in loop 2 was able to assemble in regular VLPs, suggesting that this loop has little or no effect in capsid morphogenesis. Further research has demonstrated that this region can tolerate the insertion of foreign epitopes that are correctly exposed in the surface of the capsid. This result opens the door to the use of these VLPs for antigen delivery.     

Enhanced cellular uptake of virus-like particles through immobilization on a sialic acid-displaying solid surface

Herein, we present the efficient cellular uptake of immobilized virus-like particles (VLPs) made of recombinant JC virus capsid proteins. VLPs expressed in Escherichia coli were labeled with fluorescein isothiocyanate (FITC). We compared two approaches for the cellular uptake of the FITC-VLPs. In the first approach, FITC-VLPs were immobilized on a polystyrene substrate, and then NIH3T3 cells were cultured on the same substrate. In the second approach, cells were cultured on a polystyrene substrate, and FITC-VLPs were then added to the cell culture medium. Flow cytometric analysis and confocal laser microscopic observation revealed that immobilized VLPs were incorporated into the cells with higher efficiency than were the diffusive VLPs suspended in solution. The cellular uptake of VLPs on the substrate was increased in a VLP density-dependent manner. As a control, disassembling VLPs to form VP1 pentamers abolished incorporation into the cells. Displaying sialic acid on the substrate enhanced VLP density through the specific affinities between the VLPs and sialic acid, resulting in efficient incorporation into the seeded cells. These techniques can be applied to the development of novel drug delivery systems and cell microarrays not only of nucleic acids but also of small molecules and proteins through their encapsulation in VLPs.     

Nuclear entry mechanism of the human polyomavirus JC virus-like particle: role of importins and the nuclear pore complex

JC virus (JCV) belongs to the polyomavirus family of double-stranded DNA viruses and causes progressive multifocal leukoencephalopathy in humans. Although transport of virions to the nucleus is an important step in JCV infection, the mechanism of this process has remained unclear. The outer shell of the JCV virion comprises the major capsid protein VP1, which possesses a putative nuclear localization signal (NLS), and virus-like particles (VLPs) consisting of recombinant VP1 exhibit a virion-like structure and physiological functions (cellular attachment and intracytoplasmic trafficking) similar to those of JCV virions. We have now investigated the mechanism of nuclear transport of JCV with the use of VLPs. Wild-type VLPs (wtVLPs) entered the nucleus of most HeLa or SVG cells. The virion structure of VLPs was preserved during transport to the nucleus as revealed by confocal microscopy of cells inoculated with fluorescein isothiocyanate-labeled wtVLPs containing packaged Cy3. The nuclear transport of wtVLPs in digitonin-permeabilized cells was dependent on the addition of importins alpha and beta and was prevented by wheat germ agglutinin or by antibodies to the nuclear pore complex. The nuclear entry of VLPs composed of VP1 with a mutated NLS was greatly inhibited, compared with that of wtVLPs, in both intact and permeabilized cells. Unlike wtVLPs, the mutant VLPs did not bind to importins alpha or beta. Limited proteolysis analysis revealed that the NLS of VP1 was exposed on the surface of wtVLPs. These results suggest that JCV VLPs bind to cellular importins via the NLS of VP1 and are transported into the nucleus through the nuclear pore complex.     

Structure of an insect parvovirus (Junonia coenia Densovirus) determined by cryo-electron microscopy

Junonia coenia densovirus (JcDNV) belongs to the densovirus genus of the Parvoviridae family and infects the larvae of the Common Buckeye butterfly. Its capsid is icosahedral and consists of viral proteins VP1 (88 kDa), VP2 (58 kDa), VP3 (52 kDa) and VP4 (47 kDa). Each viral protein has the same C terminus but differs in the length of its N-terminal extension. Virus-like-particles (VLPs) assemble spontaneously when the individual viral proteins are expressed by a recombinant baculovirus. We present here the structure of native JcDNV at 8.7A resolution and of the two VLPs formed essentially from VP2 and VP4 at 17 A resolution, as determined by cryo-electron microscopy. The capsid displays a remarkably smooth surface, with only two very small spikes that define a pentagonal plateau on the 5-fold axes. JcDNV is very closely related to Galleria mellonella densovirus (GmDNV), whose structure is known (94% sequence identity with VP4 and 96% similarity). We compare these structures in order to locate the structural changes and mutations that may be involved in the species shift of these densoviruses. A single mutation at the tip of one of the two small spikes is a strong candidate as a species shift determinant. Difference imaging reveals that the 21 disordered amino acid residues at the N terminus of the capsid protein VP4 are located inside the capsid at the 5-fold axis, but the additional 94 amino acid residue extension of VP2 is not visible, suggesting that it is highly disordered. There is strong evidence of DNA ordering associated with the 3-fold axes of the capsid.     

同时表达蓝舌病毒四个主要结构蛋白可装配成病毒样颗粒

为研制蓝舌病毒（ｂｌｕｅｔｏｎｇｕｅ ｖｉｒｕｓ,ＢＴＶ）基因工程疫苗和进一步研究ＢＴＶ结构与功能的关系,对ＢＴＶ病毒样颗粒（ＶＬＰ）的装配进行了研究。同时在昆虫细胞中表达ＢＴＶ主要结构蛋白ＶＰ７、ＶＰ３、ＶＰ２与ＶＰ５,将细胞裂解液超速离心纯化后,发现主要存在两 形态的颗粒：一种与前文报道的病毒核心颗粒（ＣＬＰ）相同,直径约为６０ｎｍ￣７０ｎｍ,蛋白壳厚１０ｎｍ￣１５ｎｍ;另一种大小为７０ｎｍ￣