Batch biological treatment of nitrogen deficient synthetic wastewater using Azotobacter supplemented activated sludge

Biological treatment of nitrogen deficient wastewaters are usually accomplished by external addition of nitrogen sources to the wastewater which is an extra cost item. As an alternative for effective biological treatment of nitrogen deficient wastewaters, the nitrogen fixing bacterium, Azotobacter vinelandii, was used in activated sludge and also in pure culture. Total organic carbon (TOC) removal performances of Azotobacter-added and free activated sludge cultures were compared at different initial TN/TOC ratios. The rate and extent of TOC removal were comparable for all cultures when initial TN/TOC ratio was larger than 0.12; however, both the rate and extent of TOC removal from nitrogen deficient (TN/TOC<12%) synthetic wastewater were improved by using Azotobacter-added activated sludge as compared to the Azotobacter-free activated sludge culture. More than 90% TOC removal was obtained with pure Azotobacter or Azotobacter-added activated sludge culture from a nitrogen deficient synthetic wastewater.     

Biological treatment of saline wastewater in a rotating biodisc contactor by using halophilic organisms

Biological treatment of saline wastewater presents unique difficulties as a result of plasmolysis of microorganisms in the presence of salt. Removal of salt from wastewater before biological treatment by reverse osmosis or ion exchange operations are rather expensive. Inclusion of halophilic organisms in activated sludge culture seems to be a more practical approach in biological treatment of saline wastewater. A synthetic wastewater composed of diluted molasses, urea, KH₂PO₄, MgSO₄ and various concentrations of salt (0–5% NaCl) was treated in a rotating biodisc contactor (RBC). A salt tolerant organism Halobacter halobium was added onto activated sludge culture (50%) and used as inoculum. Effects of important process variables such as A/Q ratio, COD loading rate, feed COD concentration, salt concentration and liquid phase aeration on system performance were investigated. An empirical mathematical model describing the system's performance as a function of important process variables was developed and constants were determined by using the experimental data.     

Developments in odour control and waste gas treatment biotechnology: a review

Waste and wastewater treatment processes produce odours, which can cause a nuisance to adjacent populations and contribute significantly to atmospheric pollution. Sulphurous compounds are responsible for acid rain and mist; many organic compounds of industrial origin contribute to airborne public health concerns, as well as environmental problems. Waste gases from industry have traditionally been treated using physicochemical processes, such as scrubbing, adsorption, condensation, and oxidation, however, biological treatment of waste gases has gained support as an effective and economical option in the past few decades. One emergent technique for biological waste gas treatment is the use of existing activated sludge plants as bioscrubbers, thus treating the foul air generated by other process units of the wastewater treatment system on site, with no requirement for additional units or for interruption of wastewater treatment. Limited data are available regarding the performance of activated sludge diffusion of odorous air in spite of numerous positive reports from full-scale applications in North America. This review argues that the information available is insufficient for precise process design and optimization, and simultaneous activated sludge treatment of wastewater and airborne odours could be adopted worldwide.     

Enhanced biological treatment of saline wastewater by using halophilic bacteria

Biological treatment of saline wastewater by conventional activated sludge culture usually results in low removal of chemical oxygen demand (COD) because of plasmolysis of the organisms at high salt concentrations. Since salt removal operations by physicochemical processes before biological treatment are costly, a salt-tolerant organism (Halobacter halobium) was used for effective biological treatment of saline wastewater in this study. Halobacter halobium was used in activated sludge culture for COD removal from saline wastewater (1–5% salt) by fed-batch operation of an aeration tank. Inclusion of Halobacter halobium into activated sludge culture improved the rate and extent of COD removals especially with salt above 2% (w/v).     

Sludge minimisation technologies

The treatment and disposal of excess sludge represents a bottleneck of wastewater treatment plants all over the world, due to environmental, economic, social and legal factors. There is therefore a growing interest in developing technologies to reduce the wastewater sludge generation. The goal of this paper is to present the state-of-the-art of current minimisation techniques for reducing sludge production in biological wastewater treatment processes. An overview of the main technologies is given considering three different strategies: The first option is to reduce the production of sludge by introducing in the wastewater treatment stage additional stages with a lower cellular yield coefficient compared to the one corresponding to the activated sludge process (lysis-cryptic growth, uncoupling and maintenance metabolism, predation on bacteria, anaerobic treatment). The second choice is to act on the sludge stage. As anaerobic digestion is the main process in sewage sludge treatment for reducing and stabilising the organic solids, two possibilities can be considered: introducing a pre-treatment process before the anaerobic reaction (physical, chemical or biological pre-treatments), or modifying the digestion configuration (two-stage and temperature-phased anaerobic digestion, anoxic gas flotation). And, finally, the last minimisation strategy is the removal of the sludge generated in the activated sludge plant (incineration, gasification, pyrolysis, wet air oxidation, supercritical water oxidation).     

Assessment of physiological state of microorganisms in activated sludge with flow cytometry: application for monitoring sludge production minimization

Many sludge reduction processes have been studied for the minimization of sludge production in biological wastewater treatment. The investigations on most of these processes have monitored the increase of the soluble chemical oxygen demand, the sludge mass reduction, or the decrease of the floc size, but little information has been obtained on cell lysis and the change of the biological cell activity. However, employing any strategy for reducing sludge production may have an impact of microbial community in biological wastewater treatment process. This impact may influence the sludge characteristics and the quality of effluent. The objective of this study concerns the determination of the physiological state of activated sludge microorganisms during a sludge minimization process. A thermal treatment at 80 °C for 5, 20, 40 and 60 min was chosen in this study. Staining bacteria with CTC and SYTOX green was used to evaluate biological cell activity and viability of cell types contained in activated sludge, respectively. The monitoring of cell activity and viability was performed using flow cytometry (FCM) analysis before and after thermal treatment of activated sludge. Results indicated an increase in the number of permeabilized cells and a decrease in the number of active cells, subsequent to the thermal treatment. The study also confirms the potential of FCM to successfully evaluate the physiological heterogeneity of an activated sludge bacterial population. Moreover, the experimentally observed correlations between the FCM results and the organic matter solubilization in activated sludge samples during thermal treatment revealed that the increase in the soluble organic matter concentration was predominantly due to an intracellular material release. Identifying the increase in activated sludge hydrolysis requires a precise knowledge of the involved mechanisms, and this study indicated that the FCM, used in conjunction with specific probes, could be a useful tool.     

Performance of a three-stage aerobic RBC reactor in food canning wastewater treatment

Biological treatment using attached growth in a three-stage lab-scale rotating biological contactor (RBC) was implemented for wastewater from food cannery industries. The wastewater contained high level of organic compounds due to fish and fruit cleaning, cooking and filling processes. Nutrients available in the wastewater enhanced the growth of microorganisms and allowed the biological treatment to be effective. The RBC consisted of 54 parallel discs rotating in a reservoir and was arranged in three stages, i.e. 18 discs oriented in each stage. Effect of major operating and physical variables such as hydraulic retention time (HRT), disc submergence and disc rotational speed were examined in COD removal. For duration of 5 days, 96.4% BOD removal was achieved in batch experiment. BOD constant rate (k) and ultimate BOD were determined respectively, 0.8198 day⁻¹ and 6349 mg/l by Thomas graphical method. COD removal efficiency was increased from 85.3 to 97.4% while the HRT was increased from 24 to 48 h. The COD removal efficiency increased from 74.9 to 87.5% as the disc submergence was increased from 31 to 36%. At submergence level of 23.7%, removal efficiency was increased due to activation of second and third compartments. When the rotational speed was increased from 3 to 11 rpm, the COD removal efficiency was also increased from 62.7 to 93.7%, respectively. The stage COD removal efficiency was gradually decreased with an increase number of stage and about 88% of organic compounds were removed in the first stage of aerobic RBC, indicating that the single stage reactor may be sufficient in practical application.     

Enhanced biological nitrogen removal and N<Subscript>2</Subscript>O emission characteristics of the intermittent aeration activated sludge process

Enhanced biological nitrogen removal processes are necessarily required to cope with more stringent wastewater discharging regulations, especially for wastewater with low level of organic carbon to nitrogen ratios. The intermittent aeration activated sludge process has been received comprehensive attention over the past decades, due to its excellent performance in nitrogen removal and remarkable reduction of energy consumption. Recent advances for this technology was reviewed from aspects of characteristics of system, factors affecting nitrogen removal, nitrous oxide (N₂O) emission and its control, and application of the technology and its operation control. Finally, future development was proposed. In the intermittent aeration activated sludge process, aeration duration should be controlled for adequate nitrification and non-aeration duration should be adequate for complete denitrification, and these would benefit both nitrogen removal and N₂O mitigation. The step feed strategy could be applied to enhance the better utilization of influent organic carbon for nitrogen removal. Dissolved oxygen (DO) and aerobic duration both affected nitrogen removal in particular that via nitrite in the intermittent aeration process. Nitrite should be removed efficiently to avoid a high N₂O emission under both anoxic and aerobic conditions. Intermittent aeration activated sludge process has been applied in the treatment of various wastewaters, such as municipal wastewater, swine wastewater, anaerobic effluents and landfill leachate. For practical application, DO, pH and oxidation–reduction potential could be used as indices for controlling nitrogen removal and N₂O mitigation. Microbial ecology in the intermittent aeration activated sludge process should be specifically focused in future studies.     

厌氧反应器中颗粒污泥的培育及应用研究进展*

厌氧生物处理技术因其具有有机负荷高、污泥产量低、能耗低等优点被广泛应用于各种废水处理中。厌氧颗粒污泥具有沉降性能好、微生物浓度高、有机负荷高等优点,极大地提高了废水处理效率。尤其在处理含高氨氮废水中,厌氧颗粒污泥的形成对反应器的高效生物脱氮至关重要。但到目前为止,厌氧反应器中的颗粒污泥形成及废水处理效果还缺乏系统的认识。鉴于此,总结了厌氧反应器中颗粒污泥的形成机制,分析了影响厌氧反应器中颗粒污泥形成的因素,论述了厌氧反应器中厌氧颗粒污泥生长的模拟,最后介绍了厌氧颗粒污泥在国内外的主流应用。厌氧反应器中颗粒污泥的形成是综合因素影响的结果,对影响厌氧颗粒污泥形成的每个因素都需要认真对待,可为在厌氧反应器中颗粒污泥的培育和应用提供理论指导和技术支撑。     

Anaerobic filters for the treatment of coal gasification wastewater

A process train consisting of the following sequence of unit processes, a berl-saddle-packed anaerobic filter, an expanded bed, granular activated carbon anaerobic filter, and an activated sludge nitrification system was evaluated for the treatment of a synthetically prepared coal gasification wastewater. The first-stage anaerobic filter resulted in very little removal of organic matter and no methane production. Excellent reduction in organic matter occurred in the granular activated carbon anaerobic filter. The removal mechanism was initially adsorptive and near the end of the study, removal of organic matter was primarily through conversion to methane gas. It is felt that the success of the activated carbon anaerobic filter was due to the ability of the activated carbon to sequester some components of the wastewater that were toxic to the mixed culture of anaerobic microorganisms. The activated sludge nitrification system resulted in complete ammonia oxidation and was very efficient in final effluent polishing.     

Characterization and biological treatment of pickling industry wastewater

Pickling industry wastewaters present unique difficulties in biological treatment because of high salt content (3–6% salt). Conventional activated sludge cultures disintegrate or loose microbial activity as a result of plasmolysis at salt concentrations above 1%. In order to overcome adverse effects of salt in pickling wastewater, salt tolerant bacteria (Halobacter halobium) was added to activated sludge culture and used in biological treatment of the wastewater in an activated sludge unit. After characterization and nutrient balancing of the wastewater, an activated sludge unit was used in laboratory to investigate the effects of major process variables such as sludge age and hydraulic residence time on performance of the system. Single stage and two stage activated processes were used for the treatment of the pickling wastewater. More than 95% of COD removal was obtained with a single stage process at a sludge age of θ_c=10?d and hydraulic residence time of θ_H=30?h. Similar results were obtained with the two stage process, when sludge ages and hydraulic residence times for each stage were θ_c1=θ_c2=10?d, and θ_H1=θ_H2=15?h, respectively. Kinetic coefficients were determined and the design equations were developed by using the experimental data.     

Lysis and “cryptic” growth in wastewater and sludge treatment processes

The primary objectives in biological wastewater and sludge treatment processes are to procedure a minimum quantity of solid, stable residues and a maximum quantity of carbon dioxide from the organisms present in the process feeds. As far as minimizing solids production in activated sludge type processes is concerned, endogenous activity in the recycled biomass is usually considered to be the most important mechanism. However, increased understanding of the growth characteristics of mixed microbial cultures suggests that lysis and “cryptic” growth are probably dominant mechanisms. For pathogen destruction in treatment processes, death and subsequent lysis of pathogens are clearly events that must be promoted. Here, the kinetics for death, lysis and “cryptic” growth in aerobic wastewater treatment and aerobic sludge stabilization processes are examined.     

Development of mechanistically based model for simulating soluble microbial products generation in an aerated/non-aerated SBR

Soluble microbial products (SMPs) are considered as the main organic components in wastewater treatment plant effluent from biological wastewater treatment systems. To investigate and explore SMP metabolism pathway for further treatment and control, two innovative mechanistically based activated sludge models were developed by extension of activated sludge model no.3 (ASM3). One was the model by combining SMP formation and degradation (ASM3-SMP model) processes with ASM3, and the other by combining both SMP and simultaneous substrate storage and growth (SSSG) mechanisms with ASM3 (SSSG-ASM3-SMP model). The detailed schematic modification and process supplements were introduced for comprehensively understanding all the mechanisms involved in the activated sludge process. The evaluations of these two models were demonstrated by a laboratory-scale sequencing batch reactor (SBR) operated under aerated/non-aerated conditions. The simulated and measured results indicated that SMP comprised about 83% of total soluble chemical oxygen demand (SCOD) in which biomass-associated products (BAPs) were predominant compared with utilization-associated products (UAPs). It also elucidated that there should be a minimum SMP value as the reactive time increases continuously and this conclusion could be used to optimize effluent SCOD in activated sludge processes. The comparative results among ASM3, ASM3-SMP and SSSG-ASM3-SMP models and the experimental measurements (SCOD, ammonia and nitrate nitrogen) showed clearly the best agreement with SSSG-ASM3-SMP simulation values (R = 0.993), strongly suggesting that both SMP formation and degradation and SSSG mechanisms are necessary in biologically activated sludge modeling for municipal wastewater treatment.     

短程硝化活性污泥微生物群落结构及羟胺代谢对短程硝化的影响

活性污泥法随着技术的成熟,已应用在高氨氮污水/废水处理中,通过不断发展衍生出的很多新型工艺也成为研究热点,短程硝化反应作为代表已逐渐体现出优越性。短程硝化能达到高效净化污水的目的,其反应中的代谢产物羟胺也和微生物类群及反应产物之间有着至关重要的影响。反应器中活性污泥的微生物群落结构和动态密切相关,探究微生物群落结构能帮助生物强化、优化参数,提高脱氮效率。本文主要总结了近年来有关短程硝化/半短程硝化活性污泥微生物群落组成与结构及其与反应器处理效率之间的关系,以及羟胺代谢对短程硝化的影响等方面的研究进展,这些研究加深了对微生物群落结构和污水处理工艺之间的认识,但充分发掘生物信息、提高工艺效能之路仍然充满挑战,还需利用氮平衡方法、Real-time PCR法等多种生物技术手段对短程硝化进行全方位研究,为实践提供坚实的理论基础。     

含氟有机废水处理过程活性污泥微生物群落研究进展

随着有机氟化物在各领域的广泛应用,含氟有机废水处理面临巨大挑战。活性污泥作为有机废水处理的核心技术之一,微生物在其中发挥着极其重要的作用。本综述首先聚焦在活性污泥微生物群落多样性、组成、结构和功能及其与含氟废水类型、处理工艺和处理效率之间的关系,进而讨论了功能微生物降解/转化有机氟化物的途径和作用机制,最后展望了结合分离培养降解有机氟化物的关键微生物,以及微生物组学技术解析活性污泥微生物群落构建、互作、代谢等核心问题,以提高对含氟有机废水微生物降解机理的认识,优化含氟有机废水处理工艺。     

Modeling of activated sludge wastewater treatment processes

The performance of an activated sludge wastewater treatment process consisting of an aeration tank and a secondary settler has been studied. A tanks-in-series model with backflow was used for mathematical modeling of the activated sludge wastewater treatment process. Non-linear algebraic equations obtained from the material balances of MLSS (mixed liquor suspended solids or activated sludge), BOD (biological oxygen demand) and DO (dissolved oxygen) for the aeration tank and the settler and from the behavior of the settler were solved simultaneously using the modified Newton-Raphson technique. The concentration profiles of MLSS, BOD and DO in the aeration tank were obtained. The simulation results were examined from the viewpoints of mixing in the aeration tank and flow in the secondary settling tank. The relationships between the overall performance of the activated sludge process and the operating and design parameters such as hydraulic residence time, influent BOD, recycle ratio and waste sludge ratio were obtained.     

污水处理过程中微生物群落多样性及其对环境因子响应的研究进展

污水生物处理系统的性能和稳定性与微生物群落结构和动态密切相关。通过深入了解活性污泥中微生物群落结构及其影响因素,有助于提高污水厂污染物的去除效果。在不同污水活性污泥处理系统中细菌群落主要以变形菌、绿弯菌、放线菌、厚壁菌和拟杆菌为功能菌群;活性污泥中寄居的大多数真菌来自于子囊菌门,还有少量担子菌门;古菌以产甲烷菌为主;而病毒中分布最广的噬菌体和致病性病毒是最主要的关注点。本文通过对相关文献分析及总结,综述了进水组成、不同处理工艺、参数(理化参数和运行参数)、地理位置和气候条件等环境因子对活性污泥中细菌、真菌、古菌以及病毒群落组成的影响,尽可能全面地介绍污水厂微生物群落多样性及其对环境因子的响应。同时,对未来研究方向进行探讨,以期能够为活性污泥中功能微生物的应用及调控提供理论和应用基础。     

Application of struvite precipitation as a pretreatment in treating swine wastewater

In this study, the effect of the pretreatment of NH₄-N by struvite precipitation on biological nitrogen removal was investigated in treating swine wastewater. Evaluation was mainly focused on nitrification which occurred in the activated sludge system after struvite precipitation. Laboratory experiments were performed at four different hydraulic retention times (HRT), i.e., 48, 32, 24 and 16 h. Results of the long-term operation of systems showed that the struvite precipitation used as the pretreatment of raw swine wastewater enhanced the nitrification performance in activated sludge system by reducing the applied loading rates of NH₄-N and TCOD in all operating conditions. The reduction of the applied NH₄-N loading rate kept the levels of free ammonia (FA) concentration in biological reactors low and it prevented nitrite accumulation. In addition, the struvite precipitation elicited the biological denitrification reaction and PO₄-P removal by increasing the ratios of carbon-to-nitrogen and carbon-to-phosphorus of wastewater after struvite precipitation. The struvite precipitation also enhanced the biological TCOD removal performance by reducing the toxic effect of FA. Triplicate INT-dehydrogenase tests clearly showed that FA inhibited the degradation of organic matter in activated sludge system. Finally, the struvite precipitation contributed to high TCOD, T-N and PO₄-P removals of 83, 90, and 97% by facilitating biological reaction at a short HRT of 16 h.     

Treatment of low strength industrial cluster wastewater by anaerobic hybrid reactor

The study was aimed at treating the complex, combined wastewater generated in Mangolpuri industrial cluster. It was considered as a low strength wastewater with respect to its organic content. Anaerobic treatment of this wastewater was studied using an anaerobic hybrid reactor (AHR) which combined the best features of both the upflow anaerobic sludge blanket (UASB) reactor and anaerobic fluidized bed rector (AFBR). The performance of the reactor under different organic and hydraulic loading rates were studied. The COD removal reached 94% at an organic loading rate (OLR) of 2.08 kg COD m(-3)d(-1) at an hydraulic retention time (HRT) of 6.0 h. The granules developed were characterized in terms of their diameter and terminal settling velocity.     

污水生物处理中的噬菌体及其功能研究进展

污水生物处理是一种利用微生物分解污水中的污染物、实现污水净化的方法。噬菌体是侵染细菌的病毒,在污水生物处理系统中广泛存在,它们能够特异性地控制微生物菌群,影响污水处理效果和调控污泥性状。因此,研究污水生物处理中噬菌体的分布及其功能具有重要意义。本文介绍了不同污水生物处理中噬菌体的分布,简要分析了噬菌体分离、培养与鉴定方法及其优缺点,详细总结了噬菌体在污水生物处理中的功能,包括：（1）调节微生物群落结构,影响污水处理效果;（2）作为环境监测的指示生物;（3）控制病原菌、污泥膨胀、污泥发泡和膜污染;（4）减少污泥产量,重点分析了影响噬菌体功能的因素,探讨了污水生物处理中噬菌体功能应用存在的问题及其解决方法,最后对噬菌体未来应用的发展方向进行了展望,以期为污水生物处理技术和工艺的开发与应用提供参考,促进污水处理健康发展。