QTL mapping reveals genetic architectures of malting quality between Australian and Canadian malting barley (<Emphasis Type="Italic">Hordeum vulgare</Emphasis> L.)

Australia and Canada are major exporters of malting barley (Hordeum vulgare L.), with Baudin from Australia and AC Metcalfe from Canada being the benchmark varieties for premium malting quality in the past 10 years. We used the barley doubled haploid population derived from a cross of Baudin and AC Metcalfe to map quantitative trait loci (QTLs) for malting quality. The results revealed different genetic architectures controlling malting quality for the two cultivars. Sixteen QTLs were identified and located on chromosomes 1H, 2H, 5H and 7H. The Australian barley Baudin mainly contributed to the malting quality QTL traits of high diastatic power and high β-glucanase on chromosome 1H, while Canadian barley AC Metcalfe mainly contributed to the QTL traits of high hot water extract, high free amino nitrogen, high α-amylase and low malt yield in chromosome 5HL telomere region. This study demonstrated the potential to breed new barley varieties with superior malting quality by integrating genes from Australian and Canadian malting barley varieties. This paper also provides methods to anchor traditional molecular markers without sequence information, such as amplified fragment length polymorphism markers, into the physical map of barley cv. ‘Morex’.     

AB-QTL analysis in spring barley: III. Identification of exotic alleles for the improvement of malting quality in spring barley (<Emphasis Type="Italic">H. vulgare</Emphasis> ssp. <Emphasis Type="Italic">spontaneum</Emphasis>)

Malting quality is genetically determined by the complex interaction of numerous traits which are expressed prior to and, in particular, during the malting process. Here, we applied the advanced backcross quantitative trait locus (AB-QTL) strategy (Tanksley and Nelson, Theor Appl Genet 92:191–203, 1996), to detect QTLs for malting quality traits and, in addition, to identify favourable exotic alleles for the improvement of malting quality. For this, the BC₂DH population S42 was generated from a cross between the spring barley cultivar Scarlett and the wild barley accession ISR42-8 (Hordeum vulgare ssp. spontaneum). A QTL analysis in S42 for seven malting parameters measured in two different environments yielded 48 QTLs. The exotic genotype improved the trait performance at 18 (37.5%) of 48 QTLs. These favourable exotic alleles were detected, in particular, on the chromosome arms 3HL, 4HS, 4HL and 6HL. The exotic allele on 4HL, for example, improved α-amylase activity by 16.3%, fermentability by 0.8% and reduced raw protein by 2.4%. On chromosome 6HL, the exotic allele increased α-amylase by 16.0%, fermentability by 1.3%, friability by 7.3% and reduced viscosity by 2.9%. Favourable transgressive segregation, i.e. S42 lines exhibiting significantly better performance than the recurrent parent Scarlett, was recorded for four traits. For α-amylase, fermentability, fine-grind extract and VZ45 20, 16, 2 and 26 S42 lines, respectively, surpassed the recurrent parent Scarlett. The present study hence demonstrates that wild barley does harbour valuable alleles, which can enrich the genetic basis of cultivated barley and improve malting quality traits.     

Detection and verification of malting quality QTLs using wild barley introgression lines

A malting quality quantitative trait locus (QTL) study was conducted using a set of 39 wild barley introgression lines (hereafter abbreviated with S42ILs). Each S42IL harbors a single marker-defined chromosomal segment from the wild barley accession ‘ISR 42-8’ (Hordeum vulgare ssp. spontaneum) within the genetic background of the elite spring barley cultivar ‘Scarlett’ (Hordeum vulgare ssp. vulgare). The aim of the study was (1) to verify genetic effects previously identified in the advanced backcross population S42, (2) to detect new QTLs, and (3) to identify S42ILs exhibiting multiple QTL effects. For this, grain samples from field tests in three different environments were subjected to micro malting. Subsequently, a line × phenotype association study was performed with the S42ILs in order to localize putative QTL effects. A QTL was accepted if the trait value of a particular S42IL was significantly (P < 0.05) different from the recurrent parent as a control, either across all tested environments or in a particular environment. For eight malting quality traits, altogether 40 QTLs were localized, among which 35 QTLs (87.5%) were stable across all environments. Six QTLs (15.0%) revealed a trait improving wild barley effect. Out of 36 QTLs detected in a previous advanced backcross QTL study with the parent BC₂DH population S42, 18 QTLs (50.0%) could be verified with the S42IL set. For the quality parameters α-amylase activity and Hartong 45°C, all QTLs assessed in population S42 were verified by S42ILs. In addition, eight new QTL effects and 17 QTLs affecting two newly investigated traits were localized. Two QTL clusters harboring simultaneous effects on eight and six traits, respectively, were mapped to chromosomes 1H and 4H. In future, fine-mapping of these QTL regions will be conducted in order to shed further light on the genetic basis of the most interesting QTLs.     

Marker-assisted analysis of three grain yield QTL in barley (Hordeum vulgare L.) using near isogenic lines

Three previously identified grain yield quantitative trait loci (QTL) on chromosomes 2S(2HS), 3C(3HC) and 5L(1HL), designated QTL-2S, QTL-3 and QTL-5L, respectively, were evaluated for their potential to increase yields of high-quality malting barley without disturbing their favorable malting quality profile. QTL mapping of yield related traits was performed and near-isogenic lines (NILs) were developed. QTL for plant height, head shattering, seed weight and number of rachis nodes/spike were detected in the QTL-3 region. NILs developed by introgressing QTL-3 from the high-yielding cv. Steptoe to the superior malting quality, moderate-yielding cv. Morex acquired reduced height, lodging and head shattering features of Steptoe without major changes in malting quality. The yield of NILs, measured by minimizing the losses due to lodging and head shattering, did not exceed that of Morex. Steptoe NILs, with the Morex QTL-2S region, flowered 10 days later than Steptoe but the grain yield was not changed. None of the 3 QTL studied altered the measured yield of the recipient genotype, per se, although QTL 2S and QTL-3 affected yield-related traits. We conclude that these yield QTL must interact with other genes for full expression. Alternatively, they affect the harvestable yield through reduced lodging, head shattering, and/or altered flowering time.     

Association mapping of plant height, yield, and yield stability in recombinant chromosome substitution lines (RCSLs) using Hordeum vulgare subsp. spontaneum as a source of donor alleles in a Hordeum vulgare subsp. vulgare background

Grain yield and plant height of 80 recombinant chromosome substitution lines (RCSLs) of barley were measured in six environments with contrasting available moisture profiles. Two environments were in OR, USA (Moro and Pendleton) during one growing season (2004), and four in Chile (Cauquenes and Santa Rosa) during two growing seasons (2004/2005 and 2007/2008). From the yield data obtained in the different environments, yield adaptability (Finlay–Wilkinson slope) and stability (deviations from regression) were calculated. Two commercial cultivars (Harrington and Baronesse) were used as checks in all environments. Marker-quantitative trait associations were identified using 47 simple sequence repeats (SSRs) and the general linear model (GLM) implemented in TASSEL. The mean plant height and grain yield of the 80 RCSLs differed greatly across environments, reflecting differences in water availability. In all environments, there were significant differences (P < 0.05) in grain yield among RCSLs. There was also abundant variation in yield adaptability, indicating a differential response of the RCSLs to environmental conditions across environments. Using principal component analysis, it was possible to identify genotypes with better agronomic performance than the recurrent parent cv. Harrington. The association analysis revealed 21 chromosomal regions that were highly correlated with differences in grain yield, plant height and/or yield adaptability (Finlay–Wilkinson slope). In approximately one-fourth of the cases, the H. spontaneum donor contributed favorable alleles. The associations were referenced to the quantitative trait loci (QTL) for the same traits reported in the literature.     

Genetic analysis of grain and malt quality in an elite barley population

Quantitative trait loci (QTLs) associated with grain weight, grain width, kernel hardness and malting quality were mapped in a doubled haploid population derived from two elite Australian malting barley varieties, Navigator and Admiral. A total of 30 QTLs for grain weight, grain width and kernel hardness were identified in three environments, and 63 QTLs were identified for ten malting quality traits in two environments. Three malting quality traits, namely β-amylase, diastatic power and apparent attenuation limit, were mainly controlled by a QTL linked to the Bmy1 gene at the distal end of chromosome 4H encoding a β-amylase enzyme. Six other malting quality traits, namely α-amylase, soluble protein, Kolbach index, free amino-acid nitrogen, wort β-glucan and viscosity, had coincident QTL clustered on chromosomes 1HS, 4HS, 7HS and 7HL, which demonstrated the interdependence of these traits. There was a strong association between these malt quality QTL clusters on chromosomes 1HS and 7HL and the major QTL for kernel hardness, suggesting that the use of this trait to enable early selection for malting quality in breeding programs would be feasible. In contrast, the majority of QTLs for hot-water extract were not coincident with those identified for other malt quality traits, which suggested differences in the mechanism controlling this trait. Novel QTLs have been identified for kernel hardness on chromosomes 2HL and 7HL, hot-water extract on 7HL and wort β-glucan on 6HL, and the resulting markers may be useful for marker-assisted selection in breeding programs.     

Genome-Wide Association Mapping for Kernel and Malting Quality Traits Using Historical European Barley Records

Malting quality is an important trait in breeding barley (Hordeum vulgare L.). It requires elaborate, expensive phenotyping, which involves micro-malting experiments. Although there is abundant historical information available for different cultivars in different years and trials, that historical information is not often used in genetic analyses. This study aimed to exploit historical records to assist in identifying genomic regions that affect malting and kernel quality traits in barley. This genome-wide association study utilized information on grain yield and 18 quality traits accumulated over 25 years on 174 European spring and winter barley cultivars combined with diversity array technology markers. Marker-trait associations were tested with a mixed linear model. This model took into account the genetic relatedness between cultivars based on principal components scores obtained from marker information. We detected 140 marker-trait associations. Some of these associations confirmed previously known quantitative trait loci for malting quality (on chromosomes 1H, 2H, and 5H). Other associations were reported for the first time in this study. The genetic correlations between traits are discussed in relation to the chromosomal regions associated with the different traits. This approach is expected to be particularly useful when designing strategies for multiple trait improvements.     

Fine structure mapping of the barley chromosome-1 centromere region containing malting-quality QTLs

 Current techniques for quantitative trait locus (QTLs) analyses provide only approximate locations of QTLs on chromosomes. Further resolution of identified QTL regions is often required for detailed characterization. An important region containing malting-quality QTLs on barley (Hordeum vulgare L.) chromosome 1 was identified by previous QTL analyses in a Steptoe×Morex cross. This region contains two putative adjacent overlapping QTLs, each of which has effects on malt-extract percentage, α-amylase activity, diastatic power, and malt β-glucan content. All favorable alleles for these traits are attributed to Morex. The objective of the present study was fine structure mapping of this complex QTL region to elucidate whether these two putative overlapping QTLs are really one QTL. Another question was whether the apparently overlapping QTLs are due to the pleiotropic effects of a single gene, or the independent effects of several genes. A high-resolution map in the target region was developed which spans approximately 27 cM. Molecular-marker-assisted backcrossing was employed to create isogenic lines with a Steptoe background differing only in the region containing the QTLs of interest. A total of 32 different recombinants were identified, of which eight most-informative isogenic lines plus one reconstructed Steptoe control were selected for field testing. The additive effects on malt-extract percentage, α-amylase activity, diastatic power, and malt β-glucan content from eight isogenic lines were calculated based on malting data from three locations. By comparing the significant additive effects among isogenic lines carrying different Morex fragments, two QTLs each for malt extract and for α-amylase, and two to three for diastatic power were identified in certain environments and resolved into 1–8-cM genome fragments. There was a significant QTL×environment interaction for diastatic power, and there are indications that epistatic interactions for malt β-glucan content occur between the QTLs on chromosome 1 and QTLs on other chromosomes. Received : 4 June 1997 / Accepted : 19 June 1997     

QTL analysis of agronomic traits in barley based on the doubled haploid progeny of two elite North American varieties representing different germplasm groups

A better understanding of the genetics of complex traits, such as yield, may be achieved by using molecular tools. This study was conducted to estimate the number, genome location, effect and allele phase of QTLs determining agronomic traits in the two North American malting barley (Hordeum vulgare L.) quality variety standards. Using a doubled haploid population of 140 lines from the cross of two-rowed Harrington×six-rowed Morex, agronomic phenotypic data sets from nine environments, and a 107-marker linkage map, we performed QTL analyses using simple interval mapping and simplified composite interval mapping procedures. Thirty-five QTLs were associated, either across environments or in individual environments, with five grain and agronomic traits (yield, kernel plumpness, test weight, heading date, and plant height). Significant QTL×environment interaction was detected for all traits. These interactions resulted from both changes in the magnitude of response and changes in the sign of the allelic effect. QTLs for multiple traits were coincident. The vrs1 locus on chromosome 2 (2H), which determines inflorescence row type, was coincident with the largest-effect QTL determining four traits (yield, kernel plumpness, test weight, and plant height). QTL analyses were also conducted separately for each sub-population (six-rowed and two-rowed). Seven new QTLs were detected in the sub-populations. Positive transgressive segregants were found for all traits, but they were more prevalent in the six-rowed sub-population.QTL analysis should be useful for identifying candidate genes and introgressing favorable alleles between germplasm groups. Received: 18 August 2000 / Accepted: 15 December 2000     

Identification of Hordeum spontaneum QTL alleles improving field performance of barley grown under rainfed conditions

Advanced backcross QTL (AB-QTL) analysis was deployed to identify allelic variation in wild barley (Hordeum vulgare ssp. spontaneum) of value in the improvement of grain yield and other agronomically important traits in barley (Hordeum vulgare ssp. vulgare) grown under conditions of water deficit in Mediterranean countries. A population of 123 double haploid (DH) lines obtained from BC₁F₂ plants derived from a cross between Barke (European two-row cultivar) and HOR11508 (wild barley accession) were tested in replicated field trials, under varying conditions of water availability in Italy, Morocco and Tunisia, for seven quantitative traits. Significant QTL effects at one (P 0.001) or more trial sites (P 0.01) were identified for all traits. At 42 (52%) of the 80 putative QTLs identified, the allele increasing a “traits' value” was contributed by H. spontaneum. For example, though the majority (67%) of QTL alleles increasing grain yield were contributed by H. vulgare, H. spontaneum contributed the alleles increasing grain yield at six regions on chromosomes 2H, 3H, 5H and 7H. Among them, two QTLs (associated to Bmac0093 on chromosome 2H and to Bmac0684 on chromosome 5H) were identified in all three locations and had the highest additive effects. The present study shows the validity of deploying AB-QTL analysis for identifying favourable QTL alleles from wild germplasm and indicates its potential as an enhancement strategy for the genetic improvement of cultivars better adapted to drought-prone environments.     

A new semi-dwarfing gene identified by molecular mapping of quantitative trait loci in barley

Semi-dwarfing genes have been widely used in spring barley (Hordeum vulgare L.) breeding programs in many parts of the world, but the success in developing barley cultivars with semi-dwarfing genes has been limited in North America. Exploiting new semi-dwarfing genes may help in solving this dilemma. A recombinant inbred line population was developed by crossing ZAU 7, a semi-dwarf cultivar from China, to ND16092, a tall breeding line from North Dakota. To identify quantitative trait loci (QTL) controlling plant height, a linkage map comprised of 111 molecular markers was constructed. Simple interval mapping was performed for each of the eight environments. A consistent QTL for plant height was found on chromosome 7HL. This QTL is not associated with maturity and rachis internode length. We suggest the provisional name Qph-7H for this QTL. Qph-7H from ZAU 7 reduced plant height to about 3/4 of normal; thus, Qph-7H is considered a semi-dwarfing gene. Other QTLs for plant height were found, but their expression was variable across the eight environments tested.     

Dissection of a malting quality QTL region on chromosome 1 (7H) of barley

Malting and brewing are major uses of barley (Hordeum vulgare L.) worldwide, utilizing 30–40% of the crop each year. A set of complex traits determines the quality of malted barley and its subsequent use for beer. Molecular genetics technology has increased our understanding of genetic control of the many malting and brewing quality traits, most of which are quantitatively inherited. The objective of this study was to further dissect and evaluate a known major malting quality quantitative trait locus (QTL) region of about 28 cM on chromosome 1 (7H). Molecular marker-assisted backcrossing was used to develop 39 isolines originating from a Steptoe / Morex cross. Morex, a 6–row malting type, was the donor parent and Steptoe, a 6–row feed type, was the recurrent parent. The isolines and parents were grown in four environments, and the grain was micro-malted and analyzed for malting quality traits. The effect of each Morex chromosome segment in the QTL target region was determined by composite interval mapping (CIM) and confirmed and refined by multiple interval mapping (MIM). One QTL was resolved for malt extract content, and two QTLs each were resolved for -amylase activity, diastatic power, and malt -glucan content. One additional putative malt extract QTL was detected at the plus border of the target region by CIM, but not confirmed by MIM. All QTLs were resolved to intervals of 2.0 to 6.4 cM by CIM, and to intervals of 2.0 cM or less by MIM. These results should facilitate marker-assisted selection in breeding improved malting barley cultivars.     

Expression genetics and haplotype analysis reveal cis regulation of serine carboxypeptidase I (Cxp1), a candidate gene for malting quality in barley (Hordeum vulgare L.)

Using a cDNA array-based functional genomics approach in barley, several candidate genes for malting quality including serine carboxypeptidase I (Cxp1) were previously identified (Potokina et al. in Mol Breed 14:153, 2004). The gene was mapped as a single nucleotide polymorphism (SNP) marker on chromosome 3H using the Steptoe (feeding grade) × Morex (malting grade) mapping population. Subsequently, the relative level of Cxp1 expression was determined by real-time RT-PCR for each of the 134 progeny lines and mapped as a quantitative trait. Only one quantitative trait locus (QTL) could be identified that significantly influenced the level of the Cxp1 expression. The expressed QTL maps to the same region on chromosome 3H as does the structural gene and corresponds to a QTL for “diastatic power,” one among several traits measured to assess malting quality. An analysis of 90 barley cultivars sampled from a worldwide collection revealed six SNPs at the Cxp1 locus, three of which display complete linkage disequilibrium and define two haplotypes. The Cxp1 expression level in a set of barley accessions showing haplotype I was significantly higher than that of accessions displaying haplotype II. The data provide evidence that (1) the expression of Cxp1 is regulated in cis and that (2) the level of diastatic power in the barley seed is influenced by the level of Cxp1 expression. Supplementary material is available in the online version of this article at     

QTL analysis of tolerance to a German strain of BYDV-PAV in barley (Hordeum vulgare L.)

One hundred and forty six barley doubled-haploid lines (DH lines) were tested for variation in grain yield, yield components, plant height, and heading date after artificial infection with a German isolate of barley yellow dwarf virus (BYDV-PAV-Braunschweig). Of these 146 lines 76 were derived from the cross of the barley yellow dwarf virus (BYDV) tolerant cultivar ’Post’ to cv ’Vixen’ (Ryd2) and 70 from the cross of Post to cv ’Nixe’. Phenotypic measurements were gathered on both non-infected plants and plants artificially inoculated with BYDV-PAV by viruliferous aphids in pot and field experiments for three years at two locations. For all traits a continuous variation was observed suggesting a quantitative mode of inheritance for tolerance against BYDV-PAV. Using skeleton maps constructed using SSRs, AFLPs and RAPDs, two QTLs for relative grain yield per plant after BYDV infection, explaining about 47% of the phenotypic variance, were identified in Post × Vixen at the telomeric region of chromosome 2HL and at a region containing the Ryd2 gene on chromosome 3HL. In Post × Nixe, a QTL was found in exactly the same chromosome 2HL marker interval. In this cross, additional QTL were mapped on chromosomes 7H and 4H and together these explained about 40% of the phenotypic variance. QTL for effects of BYDV infection on yield components, plant height, and heading date generally mapped to the same marker intervals, or in the vicinity of the QTL for relative grain yield, on chromosomes 2HL and 3HL, suggesting that these regions are of special importance for tolerance to the Braunschweig isolate of BYDV-PAV. Possible applications of marker-assisted selection for BYDV tolerance based on these results are discussed. Received: 1 December 2000 / Accepted: 9 March 2001     

Comparative QTL analysis of early short-time drought tolerance in Polish fodder and malting spring barleys

Key message

An effective approach for the further evolution of QTL markers, may be to create mapping populations for locally adapted gene pools, and to phenotype the studied trait under local conditions.

Abstract

Mapping populations of Polish fodder and malting spring barleys (Hordeum vulgare L.) were used to analyze traits describing short-time drought response at the seedlings stage. High-throughput genotyping (Diversity Array Technology (DArT) markers) and phenotyping techniques were used. The results showed high genetic diversity of the studied populations which allowed the creation of high-density linkage maps. There was also high diversity in the physiological responses of the barleys. Quantitative trait locus (QTL) analysis revealed 18 QTLs for nine physiological traits on all chromosomes except 1H in malting barley and 15 QTLs for five physiological traits on chromosomes 2H, 4H, 5H and 6H in fodder barley. Chromosomes 4H and 5H contained QTLs which explained most of the observed phenotypic variations in both populations. There was a major QTL for net photosynthetic rate in the malting barley located on chromosome 5H and two major QTLs for overall photochemical performance (PI) located on 5H and 7H. One major QTL related to photochemical quenching of chlorophyll fluorescence was located on chromosome 4H in fodder barley. Three QTL regions were common to both mapping populations but the corresponding regions explained different drought-induced traits. One region was for QTLs related to PSII photosynthetic activity stress index in malting barley, and the corresponding region in fodder barley was related to the water content stress index. These results are in accordance with previous studies which showed that different traits were responsible for drought tolerance variations in fodder and malting barleys.     

Detection of seed dormancy QTL in multiple mapping populations derived from crosses involving novel barley germplasm

Seed dormancy is one of the most important traits in germination process to control malting and pre-harvest sprouting in barley (Hordeum vulgare L.). EST based linkage maps were constructed on seven recombinant inbred (RI) and one doubled haploid (DH) populations derived from crosses including eleven cultivated and one wild barley strains showing the wide range of seed dormancy levels. Seed dormancy of each RI and DH line was estimated from the germination percentage at 5 and 10 weeks post-harvest after-ripening periods in 2003 and 2005. Quantitative trait loci (QTLs) controlling seed dormancy were detected by the composite interval mapping procedure on the RI and DH populations. A total of 38 QTLs clustered around 11 regions were identified on the barley chromosomes except 2H among the eight populations. Several QTL regions detected in the present study were reported on similar positions in the previous QTL studies. The QTL on at the centromeric region of long arm of chromosome 5H was identified in all the RI and DH populations with the different degrees of dormancy depth and period. The responsible gene of the QTL might possess a large allelic variation among the cross combinations, or can be multiple genes located on the same region. The various loci and their different effects in dormancy found in the barley germplasm in the present study enable us to control the practical level of seed dormancy in barley breeding programs. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Plant regeneration from embryogenic cell suspensions derived from anther cultures of barley (Hordeum vulgare L.)

Summary We have established embryogenic cell suspension cultures of barley (Hordeum vulgare L. cultivars Igri, Gimpel, Princesse, and Baronesse) from anther-derived embryogenic callus. Suspension cultures of cultivars Igri and Gimpel were regenerable. The most successful cultivar was Igri, from which a number of independent cell lines producing plantlets were established. Plants could be transferred to soil; up to now, 50% of more than 200 regenerated plants were morphologically normal and fertile. The relative frequency of sterile plants increased as suspensions aged. Suspensions older than 1 year produced embryogenic callus but only albino plantlets could be regenerated.     

Quantifying relationships between rooting traits and water uptake under drought in Mediterranean barley and durum wheat

In Mediterranean regions drought is the major factor limiting spring barley and durum wheat grain yields. This study aimed to compare spring barley and durum wheat root and shoot responses to drought and quantify relationships between root traits and water uptake under terminal drought.One spring barley（Hordeum vulgare L. cv. Rum） and two durum wheat Mediterranean cultivars（Triticum turgidum L. var durum cvs Hourani and Karim） were examined in soil‐column experiments under well watered and drought conditions. Root system architecture traits, water uptake, and plant growth were measured. Barley aerial biomass and grain yields were higher than for durum wheat cultivars in well watered conditions. Drought decreased grain yield more for barley（47%） than durum wheat（30%, Hourani）. Root‐to‐shoot dry matter ratio increased for durum wheat under drought but not for barley, and root weight increased for wheat in response todrought but decreased for barley. The critical root length density（RLD） and root volume density（RVD） for 90% available water capture for wheat were similar to（cv. Hourani） or lower than（cv. Karim） for barley depending on wheat cultivar. For both species, RVD accounted for a slightly higher proportion of phenotypic variation in water uptake under drought than RLD.     

Identification and verification of QTLs for agronomic traits using wild barley introgression lines

A set of 39 wild barley introgression lines (hereafter abbreviated with S42ILs) was subjected to a QTL study to verify genetic effects for agronomic traits, previously detected in the BC₂DH population S42 (von Korff et al. 2006 in Theor Appl Genet 112:1221–1231) and, in addition, to identify new QTLs and favorable wild barley alleles. Each line within the S42IL set contains a single marker-defined chromosomal introgression from wild barley (Hordeum vulgare ssp. spontaneum), whereas the remaining part of the genome is exclusively derived from elite spring barley (H. vulgare ssp. vulgare). Agronomic field data of the S42ILs were collected for seven traits from three different environments during the 2007 growing season. For detection of putative QTLs, a two-factorial mixed model ANOVA and, subsequently, a Dunnett test with the recurrent parent as a control were conducted. The presence of a QTL effect on a wild barley introgression was accepted, if the trait value of a particular S42IL was significantly (P < 0.05) different from the control, either across all environments and/or in a particular environment. A total of 47 QTLs were localized in the S42IL set, among which 39 QTLs were significant across all tested environments. For 19 QTLs (40.4%), the wild barley introgression was associated with a favorable effect on trait performance. Von Korff et al. (2006 in Theor Appl Genet 112:1221–1231) mapped altogether 44 QTLs for six agronomic traits to genomic regions, which are represented by wild barley introgressions of the S42IL set. Here, 18 QTLs (40.9%) revealed a favorable wild barley effect on the trait performance. By means of the S42ILs, 20 out of the 44 QTLs (45.5%) and ten out of the 18 favorable effects (55.6%) were verified. Most QTL effects were confirmed for the traits days until heading and plant height. For the six corresponding traits, a total of 17 new QTLs were identified, where at six QTLs (35.3%) the exotic introgression caused an improved trait performance. In addition, eight QTLs for the newly studied trait grains per ear were detected. Here, no QTL from wild barley exhibited a favorable effect. The introgression line S42IL-107, which carries an introgression on chromosome 2H, 17–42 cM is an example for S42ILs carrying several QTL effects simultaneously. This line exhibited improved performance across all tested environments for the traits days until heading, plant height and thousand grain weight. The line can be directly used to transfer valuable Hsp alleles into modern elite cultivars, and, thus, for breeding of improved varieties.     

RMo1 confers blast resistance in barley and is located within the complex of resistance genes containing Mla, a powdery mildew resistance gene

Isolates of Magnaporthe oryzae (the causal agent of rice blast disease) can infect a range of grass species, including barley. We report that barley Hordeum vulgare cv. Baronesse and an experimental line, BCD47, show a range of resistance reactions to infection with two rice blast isolates. The complete resistance of Baronesse to the isolate Ken 54-20 is controlled by a single dominant gene, designated RMo1. RMo1 mapped to the same linkage map position on chromosome 1H as the powdery mildew resistance locus Mla and an expressed sequence tag (k04320) that corresponds to the barley gene 711N16.16. A resistance quantitative trait locus (QTL), at which Baronesse contributed the resistance allele, to the isolate Ken 53-33 also mapped at the same position as RMo1. Synteny analysis revealed that a corresponding region on rice chromosome 5 includes the bacterial blight resistance gene xa5. These results indicate that a defined region on the short arm of barley chromosome 1H, including RMo1 and Mla, harbors genes conferring qualitative and quantitative resistance to multiple pathogens. The partial resistance of BCD47 to Ken53-33 is determined by alleles at three QTL, two of which coincide with the linkage map positions of the mildew resistance genes mlo and Mlf.