谷氨酸棒状杆菌CRISPR-Cpf1和Cre/loxP基因敲除技术的比较

【背景】谷氨酸棒状杆菌的基因敲除系统较为匮乏且效率不高,难以对其进行代谢工程改造,不利于高性能工业菌株的构建及规模生产。【目的】分别采用CRISPR-Cpf1和Cre/loxP基因敲除系统对谷氨酸棒状杆菌ATCC13032(CorynebacteriumglutamicumATCC13032)基因组上的argR和argF基因进行敲除,比较两种敲除方法的优缺点,为合理选择敲除系统提供依据。【方法】特异性重组的Cre/loxP敲除系统是首先利用同源重组将基因组上的靶基因替换为两端带有重组位点loxP的kanR片段,然后由重组酶Cre识别loxP位点并发生重组反应,从而去除替换到基因组上的kanR片段,进一步利用质粒的温敏特性将其消除,从而实现靶基因的敲除。CRISPR-Cpf1敲除系统是利用Cpf1对pre-crRNA进行加工,形成的成熟crRNA引导Cpf1识别和结合到靶DNA的特定序列上并切割双链DNA分子,通过同源重组作用去除靶基因,基于质粒自身的温敏特性将其消除,从而完成基因敲除的整个过程。【结果】Cre/lox P系统可在8N+2 d内完成N轮迭代基因敲除,而CRISPR-Cpf1系统可在5N+2d内完成N轮迭代基因无痕敲除,理论上还可以一次对多个靶位点进行编辑,效率更高,但存在同源重组效率较低、假阳性率高等缺点。【结论】与Cre/loxP系统相比,CRISPR-Cpf1辅助的同源重组基因敲除方法可省时、省力地实现基因的无痕敲除,理论上还可实现多个基因的同时敲除、总体效率更高,然而编辑效率还有提高的空间。     

一种强力霉素诱导型白念珠菌基因敲除与筛选标记再循环工具包（英文）

【目的】在白念珠菌中建立一个快捷方便经济的基因敲除与筛选标记再循环的DNA操作系统。【方法】通过ExoIII介导的不依赖于连接酶的克隆策略,在异源筛选标记基因CmLEU2、CdHIS1和CdARG4基因的两侧分别插入了loxP位点,成为筛选标记基因盒扩增的模板。全基因合成了经过白念珠菌密码子优化的rTetR元件,并组装成Tet-on启动子。将密码子优化的重组酶Cre基因置于该启动子控制下。然后将他们插入筛选标记基因CdHIS1和CdARG4的CDS区域,形成筛选标记基因再循环载体。【结果】构建了3个用于白念珠菌基因敲除的侧翼含有loxP位点的筛选标记基因载体,以及2个含有Tet-on启动子控制的Cre酶的载体用于筛选标记基因的再循环。【结论】成功构建了一个白念珠菌中可诱导的基因敲除和筛选标记再循环的载体系统并成功应用于多个基因缺失株构建。这个系统有助于快速构建白念珠菌的单基因和多基因敲除菌株。     

一种强力霉素诱导型白念珠菌基因敲除与筛选标记再循环工具包

【目的】在白念珠菌中建立一个快捷方便经济的基因敲除与筛选标记再循环的DNA操作系统。【方法】通过ExoIII介导的不依赖于连接酶的克隆策略,在异源筛选标记基因CmLEU2、CdHIS1和CdARG4基因的两侧分别插入了loxP位点,成为筛选标记基因盒扩增的模板。全基因合成了经过白念珠菌密码子优化的rTetR元件,并组装成Tet-on启动子。将密码子优化的重组酶Cre基因置于该启动子控制下。然后将他们插入筛选标记基因CdHIS1和CdARG4的CDS区域,形成筛选标记基因再循环载体。【结果】构建了3个用于白念珠菌基因敲除的侧翼含有loxP位点的筛选标记基因载体,以及2个含有Tet-on启动子控制的Cre酶的载体用于筛选标记基因的再循环。【结论】成功构建了一个白念珠菌中可诱导的基因敲除和筛选标记再循环的载体系统并成功应用于多个基因缺失株构建。这个系统有助于快速构建白念珠菌的单基因和多基因敲除菌株。     

敲除sfa1基因提高酿酒酵母乙醇合成能力的研究

sfa1基因编码的酶具有乙醇脱氢酶和甲醛脱氢酶双功能活性,通过设计含有与sfa1基因两侧序列同源的长引物,以质粒pUG6和pUG66为模板进行PCR构建带有Cre/loxP系统的酿酒酵母sfa1基因敲除组件,转化酿酒酵母(Saccharomyces cerevisiae)YS1并将质粒pSH47转入阳性克隆子,诱导表达Cre酶切除筛选标记,在原ORF基因处保留一个loxP位点,丢失质粒后获得sfa1基因缺陷型酵母突变株YS1-sfa1。摇瓶发酵实验表明,突变株YS1-sfa1的乙醇分解代谢活性降低,乙醇产量提高8.0%。     

酿酒酵母HOR2基因缺失突变株的构建

目的:构建酿酒酵母HOR2基因缺失的突变株并研究其对甘油和乙醇产量的影响。方法:以PCR为基础,通过同源重组的方式使目的基因缺失。结果:通过设计含有与HOR2(GPP2)基因两侧序列同源的长引物,以质粒PUG6为模板进行PCR构建含有Cre/loxP系统的酿酒酵母HOR2基因敲除组件,转化酿酒酵母(Saccharomyces cerevisiae)YS2,获得为loxP-kan-loxP序列组件所替换而产生kanr的阳性克隆子。然后再将质粒PSH65转入阳性克隆子诱导表达Cre酶切除筛选标记,在原ORF基因处保留一个loxP位点,丢失质粒后获得HOR2单倍体缺陷型菌株。重复转化敲除组件实现另一条等位基因的敲除。发酵实验表明,突变株甘油产量降低3.34%,乙醇产量提高1.96%。结论:成功获得了酿酒酵母HOR2基因缺失的突变株,并命名为YS2-HOR2。     

酿酒酵母ADH3基因的敲除

设计含有与酿酒酵母(Saccharomyces cerevisiae)编码乙醇脱氢酶Ⅲ的ADH3基因ORF两侧序列同源的长引物,以质粒pUG6为模板进行PCR构建带有Cre/loxP系统的敲除组件。转化酿酒酵母YS3(Saccharomyces cerevisiae),并将质粒pSH65转入阳性克隆子。半乳糖诱导表达Cre酶切除Kanr基因,在YPD培养基中连续传代培养丢失pSH65质粒,在原ORF处留下一个loxP位点,获得ADH3单倍体缺陷型菌株。利用同样的方法再次敲除双倍体的另一个等位基因。最终获得ADH3双倍体基因缺陷型突变株YS3-ADH3。     

Cre/loxP介导的伤寒杆菌染色体上插入基因的切除

来源于P1噬菌体的位点专一性重组系统loxP/Cre,已成为一种新的DNA操作的有用工具,在体内外都获得了成功的应用.为了将四环素诱导表达系统引入减毒伤寒杆菌CVD908株中,tetR-loxP-neo串联基因已通过同源重组被定位插入在CVD908株的△aroC位点中.构建一Cre酶表达受启动子P_LtetO-1控制的自杀质粒pJG9/Cre,以切除CVD908株△aroC中同向loxP序列之间的neo基因.质粒pJG9/Cre电转化入菌中,加入去水四环素诱导Cre酶表达,通过重组切除neo基因,再通过自杀质粒上SacB基因的启动,使质粒清除出菌细胞.抗生素鉴定和PCR扩增都证明,CVD908株△aroC位点中的neo基因被成功切除.     

Red/ET重组在基因打靶载体快速构建中的应用

通过合理应用Red/ET重组技术实现基因打靶载体的快速构建。在Red/ET重组介导下,首先从基因组DNA中将靶基因片段亚克隆至打靶质粒载体中,随后将两端带有50 bp同源臂的抗性筛选基因插入并替换靶基因上的目标序列,如此两步操作即可完成一个传统型基因敲除打靶载体的构建;结合Cre-loxP系统,在传统型基因敲除打靶载体的基础上,经过再一轮的Red/ET重组就能够成功实现条件性基因敲除打靶载体的构建。整个实验过程不需要PCR扩增长、短臂序列,也不涉及酶切、连接反应,因此,不仅省时、省力,而且所构建的基因打靶载体序列准确,无突变。此实验方法的建立为加速后基因组时代的基因功能研究提供了一条捷径。     

pSH-CUP重组质粒的构建及面包酵母酸性海藻糖 酶基因的敲除

设计含有与面包酵母(Saccharomyces cerevisiae BY-6)编码酸性海藻糖酶ATH基因内部部分序列同源的长引物,以质粒pUG6为模板进行PCR构建带有Cre/loxP系统的敲除单元,转化面包酵母获得G418阳性克隆.将铜抗性基因(cuP1-MT1)导入Cre重组酶表达质粒pSH47,得到重组质粒pSH-CUZ,并转化阳性克隆,以铜抗性筛选面包酵母转化子.半乳糖诱导表达Cre酶切除Kanr基因.重组质粒pSH-CUP的构建,不仅解决了酵母转化子筛选标记问题和非酵母基因的引入,而且使LoxP-kanMX-loxP基因敲除体系在进行真核生物基因敲除时更加方便可行.     

Cre重组酶表达载体的构建及其在转基因小鼠胰腺中的表达

组织特异性表达Cre重组酶的转基因小鼠是进行组织特异性条件敲除研究的关键。采用PCR扩增大鼠胰岛素基因705bp启动子指导发胰岛细胞中特异表达;同时采用改构的Cre重组酶基因,在其5'端添加有真核核糖体结合序列和核定位序列使Cre重组酶能穿越核膜在细胞核能发挥功能;同时,为了保证原核基因Cre能在真核系统顺利表达,在其3'端添加含内含子的人生长激素基因。构建的表达载体在去除原核序列后用显微注射方法转基因小鼠,在出生的27只仔鼠中,PCR检测共获得7只Cre整合阳性的转基因小鼠,整合率26％。这种Cre转基因小鼠与基因组小携带LoxP位点的条件基因打靶小鼠交配,在胰腺组织中可以检测到Cre介导的重组,表明Cre在转基因小鼠胰腺中有表达。     

A set of loxP marker cassettes for Cre-mediated multiple gene disruption in Schizosaccharomyces pombe

For functional analysis, the presence of gene families and isoenzymes often makes it necessary to delete more than one gene, while the number of marker genes is limited in Schizosaccharomyces pombe. Here we describe a loxP-flanked ura4(+) cassette and Cre recombinase vector for a Cre-loxP-mediated marker removal procedure in S. pombe. This loxP-ura4-loxP cassette can be used for disruption of hmt1(+) as a model target gene. We have constructed two vectors which express Cre recombinase under the control of the nmt1 or nmt41 promoter. Excisive recombination at loxP sites in the chromosome was promoted efficiently and accurately when the Cre recombinase was expressed under the control of the nmt41 promoter. In addition, ura4(+) could be excised from the genome by Cre recombinase, when a single loxP site was adjacent to ura4. The use of the Cre-loxP system proved to be a practical strategy to excise a marker gene for repeated use in S. pombe.     

Cre-loxP recombination system for large genome rearrangements in Lactococcus lactis

We have used a new genetic strategy based on the Cre-loxP recombination system to generate large chromosomal rearrangements in Lactococcus lactis. Two loxP sites were sequentially integrated in inverse order into the chromosome either at random locations by transposition or at fixed points by homologous recombination. The recombination between the two chromosomal loxP sites was highly efficient (approximately 1 x 10(-1)/cell) when the Cre recombinase was provided in trans, and parental- or inverted-type chromosomal structures were isolated after removal of the Cre recombinase. The usefulness of this approach was demonstrated by creating three large inversions of 500, 1,115, and 1,160 kb in size that modified the lactococcal genome organization to different extents. The Cre-loxP recombination system described can potentially be used for other gram-positive bacteria without further modification.     

Brief expression of a GFP cre fusion gene in embryonic stem cells allows rapid retrieval of site-specific genomic deletions.

The Cre DNA recombinase of bacteriophage P1 has become a useful tool for precise genomic manipulation in embryonic stem (ES) cells that have been gene modified by homologous recombination. We have re-engineered the cre gene to allow ready identification of living Cre+cells by constructing a functional fusion between Cre and an enhanced green fluorescent protein from Aequorea victoria (GFPS65T). The GFP cre fusion gene product rapidly targeted the nucleus in the absence of any exogenous nuclear localization signal. Moreover, GFPCre catalyzed efficient DNA recombination in both a mouse 3T3 derivative cell line and in murine ES cells. Fluorescence- activated cell sorting (FACS) of transiently GFP cre -transfected ES cells not only allowed rapid and efficient isolation of Cre+cells after DNA transfection but also demonstrated that a burst of Cre expression is sufficient to commit cells to Cre-mediated 'pop-out' of loxP -tagged DNA from the genome. Thus, GFP cre allows rapid identification of living cells in which loxP - flanked DNA sequences are destined to be removed from the genome by Cre-mediated recombination without reliance on recombinational activation or inactivation of a marker gene at the target locus. In addition, the GFP cre fusion gene will prove useful in tracing tissue-specific Cre expression in transgenic animals, thereby facilitating the generation and analysis of conditional gene knockout mice.     

Adenovirus-mediated Genetic Removal of Signaling Molecules in Cultured Primary Mouse Embryonic Fibroblasts

The ability to genetically remove specific components of various cell signalling cascades has been an integral tool in modern signal transduction analysis. One particular method to achieve this conditional deletion is via the use of the Cre-loxP system. This method involves flanking the gene of interest with loxP sites, which are specific recognition sequences for the Cre recombinase protein. Exposure of the so-called floxed (flanked by loxP site) DNA to this enzyme results in a Cre-mediated recombination event at the loxP sites, and subsequent excision of the intervening gene³. Several different methods exist to administer Cre recombinase to the site of interest. In this video, we demonstrate the use of an adenovirus containing the Cre recombinase gene to infect primary mouse embryonic fibroblasts (MEFs) obtained from embryos containing a floxed Rac1 allele¹. Our rationale for selecting Rac1 MEFs for our experiments is that clear morphological changes can be seen upon deletion of Rac1, due to alterations in the actin cytoskeleton^2,5. 72 hours following viral transduction and Cre expression, cells were stained using the actin dye phalloidin and imaged using confocal laser scanning microscopy. It was observed that MEFs which had been exposed to the adeno-Cre virus appeared contracted and elongated in morphology compared to uninfected cells, consistent with previous reports^2,5. The adenovirus method of Cre recombinase delivery is advantageous as the adeno-Cre virus is easily available, and gene deletion via Cre in nearly 100% of the cells can be achieved with optimized adenoviral infection.     

Simultaneous on/off regulation of transgenes located on a mammalian chromosome with Cre-expressing adenovirus and a mutant loxP

The site-specific recombinase Cre has often been used for on/off regulation of expression of transgenes introduced into the mammalian chromosome. However, this method is only applicable to the regulation of a single gene and cannot be used to simultaneously regulate two genes, because site-specific recombination occurs from the target loxP sequence of one regulating unit to the loxP sequence of any other unit and would eventually disrupt the structure of both regulating units. We previously reported a mutant loxP sequence with a two base substitution called loxP V (previously called loxP 2272), with which wild-type loxP cannot recombine but with which the identical mutant loxP recombines efficiently. In the present study we isolated cell lines bearing two regulating units on a chromosome containing a pair of wild-type loxP sequences or mutant loxP V sequences. After infection with Cre-expressing recombinant adenovirus AxCANCre, expression of a gene in each regulating unit was simultaneously turned on and off. Southern analyses showed that both regulating units were processed simultaneously and independently, even after infection with a limited amount of AxCANCre. The results showed that simultaneous regulation of gene expression on a mammalian chromosome mediated by Cre can be achieved by using mutant loxP V and wild-type loxP. This method may be a useful approach for conditional transgenic/knockout animals and investigation of gene function involving two genes simultaneously. Another possible application is for preparation of a new packaging cell line of viral vectors through simultaneous production of toxic viral genes.     

A morpholino phenocopy of the cyclops mutation

Summary: Conditional and tissue specific gene targeting using the Cre‐loxP recombination system in combination with established ES cell techniques has become a standard for in vivo loss of function studies. In a typical flox and delete gene targeting strategy, the loxP‐neo‐loxP cassette is inserted into an intron and an additional loxP site is located in one of the homology arms so that loxP sites surround a functionally essential part of the gene. The neo cassette in usually removed by transient expression of the Cre recombinase in ES cells to avoid selection gene interference and genetic ambiquity. However, this causes a significant increase in manipulation of ES cells and often compromises ES cell pluripotency. Here we describe a method in which the floxed neo gene is removed from a knockout allele by infecting 16‐cell‐stage morulae by the recombinant Cre adenovirus. This virus provides only transient Cre expression and does not integrate into the mouse genome. Produced mosaic mice transmitted the desired allele without the neo cassette with high frequency to their offspring. This method is rapid and easy and does not require any special equipment. Moreover, because superovulated mice can be used as donors, this method does not necessitate a large number of mice. genesis 31:126–129, 2001. © 2001 Wiley‐Liss, Inc.     

Preferential synapsis of loxP sites drives ordered strand exchange in Cre-loxP site-specific recombination

The bacteriophage P1 Cre recombinase catalyzes site-specific recombination between 34-base-pair loxP sequences in a variety of topological contexts. This reaction is widely used to manipulate DNA molecules in applications ranging from benchtop cloning to genome modifications in transgenic animals. Despite the simple, highly symmetric nature of the Cre-loxP system, there is strong evidence that the reaction is asymmetric; the 'bottom' strands in the recombining loxP sites are preferentially exchanged before the 'top' strands. Here, we address the mechanistic basis for ordered strand exchange in the Cre-loxP recombination pathway. Using suicide substrates containing 5'-bridging phosphorothioate linkages at both cleavage sites, fluorescence resonance energy transfer between synapsed loxP sites and a Cre mutant that can cleave the bridging phosphorothioate linkage but not a normal phosphodiester linkage, we showed that preferential formation of a specific synaptic complex between loxP sites imposes ordered strand exchange during recombination and that synapsis stimulates cleavage of loxP sites.     

Development of high-titer retroviral producer cell lines by using Cre-mediated recombination.

Retroviral gene transfer is widely used in experimental and human gene therapy applications. We have devised a novel method of generating high-titer retroviral producer cell lines based on the P1 bacteriophage recombinase system Cre-loxP. Incorporation of loxP sites flanking a Neo(r)-SVTK cassette in the proviral DNA allows excision of these selectable markers through expression of Cre recombinase after production of a high-titer producer cell line. The resultant producer line contains a single loxP site flanked by the viral long terminal repeats. Retransfection of this line with the Cre expression vector and a plasmid containing a gene of interest flanked by loxP sites allows insertional recombination of the gene into the favorable preexisting site in the genome and the generation of a new line with a titer equivalent to that of the parental producer cell line. The efficiency of the process is sufficient to allow the generation of multiple new producer lines without the addition of antibiotic resistance genes. We have successfully generated retroviral vectors carrying different genes by using this approach and discuss the potential applications of this method in gene therapy.     

Conditional knockout mouse for tissue-specific disruption of the cyclooxygenase-2 (Cox-2) gene

Cyclooxygenase-2 (Cox-2) modulates many normal functions, and appears to play a role in a wide variety of pathophysiologic conditions. Cox-2 gene expression is induced in many different cell types, in response to many distinct stimuli. We generated a conditional knockout mouse in which critical exons of the Cox-2 gene are flanked with loxP sites. Cox-2(flox/flox) mice appear normal and are fertile. Recombination at the loxP sites, loss of Cox-2 protein expression, and prevention of induced PGE2 accumulation are observed in Cox-2(flox/flox) mouse embryo fibroblasts following infection with an adenovirus expressing CRE recombinase. In vivo recombination at the Cox-2(flox) allele was demonstrated in the liver of Cox-2(flox/flox) mice following intravenous injection of adenovirus expressing CRE recombinase. Spatially and temporally restricted elimination of the Cox-2 gene in Cox-2(flox/flox) conditional knockout mice should provide a valuable tool to analyze the cell type-specific role of Cox-2 in many disease models.