Purification of protein from a crude mixture through SDS-PAGE transfer method

SDS-polyacrylamide gel electrophoresis (SDS-PAGE) transfer method was used for purification and enrichment of the protein from crude sample. Coomassie bluc/ZnSO4 stained protein band(s) containing intact polyacrylamide gel were loaded on to another polyacrylamide gel either alone or as pooled gel bands. Two/three bands were combined together and arranged tightly over one another, sealed with stacking gel and ran in another gel, which was quite useful for enrichment and purification of a particular protein from a complex mixture. Recovery of protein by gel transfer method was found to be 70% in case of ZnSO4 staining, whereas around 30% recovery was possible, following Coomassie blue staining. The method described here for purification of protein(s) from a complex mixture, following gel transfer procedure could be useful for further characterization of the desired protein.     

Blotting protein complexes from native gels to electron microscopy grids

We report a simple and generic method for the direct transfer of protein complexes separated by native gel electrophoresis to electron microscopy grids. After transfer, sufficient material remains in the gel for identification and characterization by mass spectrometry. The method should facilitate higher-throughput single-particle analysis by substantially reducing the time needed for protein purification, as demonstrated for three complexes from Thermoplasma acidophilum.     

A new method of DNA and RNA transfer onto nitrocellulose filters during blot hybridization

A quick (1-2 hour) method of DNA and RNA transfer onto nitrocellulose filters for subsequent blot-hybridization was elaborated. The main features of the method proposed are, firstly, almost complete exclusion of the mechanical impact on the gel and, secondly, addition to the transfer medium (20 X SSC) of a chaotropic agent, 0.5 M NaClO4. The latter results in a slight dissolution of the gel matrix and, on the other hand, somewhat increases the binding of the nucleic acid to the nitrocellulose. The method shortens significantly the time of DNA or RNA transfer at equal, or even higher, quality of hybridization.     

Hybridization of DNA to RNA in methylmercuric hydroxide agarose gels

We describe a method for hybridization of cDNA probes to RNA directly in agarose gels which provides a practical alternative to methods involving transfer of the RNA out of the gel. Total cellular RNA is subjected to electrophoresis in agarose gels containing methylmercuric hydroxide as the denaturing agent. After removal of the methylmercuric hydroxide, the gel is dried and 32P-labeled DNA probes are hybridized to the immobilized RNA. This method is more economical in time and expense than methods involving transfer of the RNA out of the gel, while maintaining a level of sensitivity comparable to other procedures.     

Dried gel hybridization in place of Southern hybridization for detection of Listeria monocytogenes DNA fragments

A simple, sensitive, dried gel DNA hybridization method for detection of Listeria monocytogenes DNA fragments is described. DNA samples were fractionated on an agarose gel. The gel was then denatured in NaOH-NaCl and neutralized in Tris-NaCl. The resulting agarose gel was dried and hybridized with 32P-labelled DNA probe. No transfer to nitrocellulose membranes was used.     

Alkaline transfer of DNA to plastic membrane

DNA forms a stable complex with Gene Screen Plus membrane at alkaline pH. Based on this, a method of alkaline transfer of DNA from agarose gel to Gene Screen Plus membrane was elaborated. The procedure entails the use of 0.4 M NaOH for both, the DNA denaturation and DNA transfer steps. The alkaline transfer offers a higher hybridization efficiency and simplifies the transfer procedure as compared with the standard method of DNA transfer at neutral pH. In addition, it can be used to remove RNA contamination from the transferred DNA.     

Preparative electrophoresis of human apolipoprotein E: an improved method

Apolipoprotein E was isolated from human very low density lipoproteins by a two-step electrophoretic procedure derived from that of Méndez (1982. Anal. Biochem. 126: 403-408). It included separation in a sodium dodecylsulfate polyacrylamide slab gel, transfer into an agarose gel, and extraction by ultracentrifugation for 30 min. No protein labeling, dialysis, or concentration procedures were needed. The method was fast, showed an excellent protein recovery, and could be suitable as a general method of protein isolation by polyacrylamide gel electrophoresis.     

Quantitative assay of deoxyribonuclease activity after isoelectric focusing in polyacrylamide gels: pH control and effects of enzyme diffusion

A method for the quantitative assay of nuclease activity in crude cell lysates after isoelectric focusing (IEF) in polyacrylamide slab gels is described. After IEF, an agarose overlay gel containing DNA is placed on the IEF gel and the nuclease activity quantified by the loss of ethidium bromide fluorescence of the DNA. With this method a linear response was obtained for 1 to 10 ng of DNase I. Various methods of pH equilibration after IEF were also evaluated. The use of a high buffer concentration in the overlay gel is recommended to control the pH during the enzyme reaction. An analytical solution for the diffusion of enzymes from the IEF gel to the overlay gel is also presented and an equation that may be used to choose optimum times for transfer of the enzyme from the IEF gel to the overlay gel is given.     

Double replica electroblotting: a method to produce two replicas from one gel

Electroblotting is a method by which proteins or nucleic acids, separated by electrophoresis, are transferred, also by electrophoresis, from a gel to a so-called transfer medium, e.g a nitrocellulose membrane. In some experiments, it is desirable to be able to obtain more than one replica from each gel and it has now proved possible to produce two replicas, which are almost identical, from one gel. This is achieved by applying one membrane on each side of the gel and change the direction of the current several times in such a way that the efficient transfer time is short in the beginning of the electroblotting and is increased for each cycle. This procedure will be referred to as 'double replica electroblotting'. Proteins were transferred at 100 V and the duration of an experiment with 2 h efficient transfer time in each direction was 7 h. The gel was more efficiently depleted of proteins after double replica electroblotting as compared to ordinary electrotransfer in one direction. Cathodically migrating proteins are also trapped on the membranes with this technique. Double replica electroblotting was used to produce two replicas from ordinary sodium dodecyl sulfate polyacrylamide gels as well as from 2-dimensional gels.     

Serial electrophoretic transfers: A technique for the identification of numerous enzymes from single polyacrylamide gels

We describe an electrophoretic method for the transfer of macromolecules from polyacrylamide slab gels to ion-exchange paper without loss of clarity or resolution. A series of partial transfers provides numerous copies of a single gel separation, and these copies may be assayed independently with enzyme specific stains. This method therefore combines the advantages of polyacrylamide gel electrophoresis for detecting enzyme variation with an efficient method for examining numerous enzymes from a single gel separation.This work was supported by NIH Grants GM 24849 and GM 27119 to R. C. Lewontin.     

Electroblotting of double-stranded DNA for hybridization experiments: DNA transfer is complete within 10 minutes after pulsed-field gel electrophoresis

A rapid, simple, and efficient method for DNA blotting is presented. This method is characteristic in that DNA is transferred without denaturation from an electrophoretic gel to a membrane in low-salt concentrations and denatured on the membrane after blotting. More than 89% of double-stranded DNAs ranging in size from 75 to 1.9 million bp can simultaneously be transferred from the gel to a positively charged nylon membrane within 10 min. The present "low-salt electroblotting" method is superior to other blotting methods in that it saves time and labor and its high and even transfer efficiency makes it useful for hybridization analysis.     

Use of a zwitterionic detergent for the restoration of the antibody binding capacity of immunoblotted Francisella tularensis lipopolysaccharide.

A method for the partial restoration of the antibody binding capacity of Francisella tularensis lipopolysaccharide (LPS) following denaturation (dissociation) in boiling sodium dodecyl sulfate (SDS) is described. The method relies on the presence of a zwitterionic detergent in the matrix of an SDS-polyacrylamide gel and in the transfer buffer during an immunoblot. F. tularensis LPS, which had lost its earlier capacity to bind to a particular monoclonal antibody in the normal blot procedure, did bind following the addition of the zwitterionic detergent to the polyacrylamide gel and transfer buffer. A number of detergents were tested but most success in restoring antibody binding was achieved with Zwittergent 3-08. This simple modification to the immunoblot procedure proved helpful in identifying a monoclonal antibody specific to hot phenol-extracted F. tularensis LPS.     

Efficient transfer of proteins from acetic acid-urea and isoelectric-focusing gels to nitrocellulose membrane filters with retention of protein antigenicity

A method which facilitates the rapid and quantitative electrophoretic transfer of proteins from gels not containing sodium dodecyl sulfate (SDS) to nitrocellulose membranes is described. The equilibration of non-SDS-polyacrylamide gel electrophoretic gels in a buffer containing SDS confers a net negative charge to the proteins present, presumably as a result of the formation of SDS-protein complexes. Proteins from gels equilibrated in the SDS buffer and then electroblotted in a Tris-glycine buffer at pH 8.3 are transferred with much greater efficiency than are proteins from untreated gels. The method has been shown to significantly enhance the electrophoretic transfer of polyoma viral proteins resolved in either acetic acid-urea or isoelectric-focusing gels to nitrocellulose membranes, and it is suggested that the method should have universal applicability to all gel electrophoresis systems currently employed. The proteins from isoelectric-focusing gels treated with SDS and transferred to nitrocellulose membranes were found to retain antigenicity to antisera prepared against either denatured or native viral proteins.     

One-hour downward alkaline capillary transfer for blotting of DNA and RNA.

The downward alkaline capillary transfer of DNA and RNA from agarose gel to a hybridization membrane was performed using a transfer solution containing 3 M NaCl and 8 mM NaOH. Under mild alkaline conditions, DNA and RNA were completely eluted from the agarose gel and bound to a hybridization membrane within 1 h. On the basis of this new method of transfer a blotting protocol, downward alkaline blotting, was elaborated. It provides a fast and efficient alternative to commonly used Southern and Northern blotting protocols. The downward alkaline blotting of DNA and RNA can be completed in 2.5 and 1.5 h, respectively, and can be used with both plastic and nitrocellulose membranes. In addition, the downward alkaline blotting protocol allows for a hybridization efficiency of DNA and RNA higher than that of the standard blotting protocols performed at neutral pH.     

Detection of base mutations in genomic DNA using denaturing gradient gel electrophoresis (DGGE) followed by transfer and hybridization with gene-specific probes

It has been shown that minor differences, such as single-base-pair substitutions between otherwise identical DNA fragments can result in altered melting behavior detectable by denaturing gradient gel electrophoresis (DGGE). Sequence variations in only a small DNA region within one locus can be detected using the previously described procedures. We have developed a method for the efficient Southern transfer of genomic DNA fragments from the denaturing gradient gels in order to be able to analyze larger regions in several loci for variation. The gels were made using polyacrylamide containing 2% low-geling-temperature agarose (LGT). The polyacrylamide gel (PAG) was crosslinked with a reversible crosslinker, and after electrophoresis the crosslinks were cleaved, the structure of the gel being maintained by the agarose. After this treatment of the denaturing gels, more than 90% of the DNA fragments could be transferred to nylon membranes by alkaline transfer, while electroblotting transferred only 10% of the DNA. Hybridization with gene-specific probes was then performed. We have used this technique to identify an RFLP in the COL1A2 gene in a human genomic DNA sample. The transfer technique described should make the use of DGGE more widely applicable since the genomic DNA fragments separated on one gel can be screened with several different probes, both cDNA and genomic probes.     

Electrophoretic transfer protein zymography

Zymography detects and characterizes proteolytic enzymes by electrophoresis of protease-containing samples into a nonreducing sodium dodecyl sulfate–polyacrylamide gel electrophoresis (SDS–PAGE) gel containing a copolymerized protein substrate. The usefulness of zymography for molecular weight determination and proteomic analysis is hampered by the fact that some proteases exhibit slower migration through a gel that contains substrate protein. This article introduces electrophoretic transfer protein zymography as one solution to this problem. In this technique, samples containing proteolytic enzymes are first resolved in nonreducing SDS–PAGE on a gel without protein substrate. The proteins in the resolving gel are then electrophoretically transferred to a receiving gel previously prepared with a copolymerized protein substrate. The receiving gel is then developed as a zymogram to visualize clear or lightly stained bands in a dark background. Band intensities are linearly related to the amount of protease, extending the usefulness of the technique so long as conditions for transfer and development of the zymogram are kept constant. Conditions of transfer, such as the pore sizes of resolving and receiving gels and the transfer time relative to the molecular weight of the protease, are explored.     

Hybridization of nucleic acids directly in agarose gels

Nucleic acids, both DNA and RNA, separated on agarose gels can be visualized by direct hybridization of the dried gel with appropriate radioactive probes. This method does not involve the transfer of the nucleic acid from the gel. The method requires less manipulation than other procedures; it is extremely rapid, sensitive, and inexpensive. These attributes make this procedure a valuable alternative or supplement to the commonly used methods for visualization by hybridization of nucleic acids separated on agarose gels.     

Protein array staining methods for undefined protein content, manufacturing quality control, and performance validation

Methods to assess the quality and performance of protein microarrays fabricated from undefined protein content are required to elucidate slide-to-slide variability and interpolate resulting signal intensity values after an interaction assay. We therefore developed several simple total- and posttranslational modification-specific, on-chip staining methods to quantitatively assess the quality of gel element protein arrays manufactured with whole-cell lysate in vitro protein fractions derived from two-dimensional liquid-phase fractionation (PF2D) technology. A linear dynamic range of at least 3 logs was observed for protein stains and immobilized protein content, with a lower limit of detection at 8 pg of protein per gel element with Deep Purple protein stain and a field-portable microarray imager. Data demonstrate the successful isolation, separation, transfer, and immobilization of putative transmembrane proteins from Yersinia pestis KIM D27 with the combined PF2D and gel element array method. Internal bovine serum albumin standard curves provided a method to assess on-chip PF2D transfer and quantify total protein immobilized per gel element. The basic PF2D array fabrication and quality assurance/quality control methods described here therefore provide a standard operating procedure and basis for developing whole-proteome arrays for interrogating host-pathogen interactions, independent of sequenced genomes, affinity tags, or a priori knowledge of target cell composition.     

Purification and some properties of the glycolipid transfer protein from pig brain

A glycolipid-specific lipid transfer protein has been purified to apparent homogeneity from pig brain post-mitochondrial supernatant. The purified protein was obtained after about 6,000-fold purification at a yield of 19%. Evidence for the homogeneity of the purified protein includes the following: (i) a single band in acidic gel electrophoresis, in sodium dodecyl sulfate-gel electrophoresis, (ii) a single band in analytical gel isoelectric focusing, (iii) exact correspondence between the glycolipid transfer activity and stained protein absorbance in the acidic gel electrophoresis, and (iv) coincidence between the transfer activity and protein absorption at 280 nm in gel filtration through Ultrogel AcA 54. The protein has an isoelectric point of about 8.3 and a molecular weight of 22,000, as measured by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. A molecular weight of 15,000 was calculated from AcA 54 gel filtration. The amino acid composition has been determined. The protein binds [3H]galactosylceramide but not [3H]phosphatidylcholine. Under the conditions used, 1 mol of the transfer protein bound about 0.13 mol of [3H]galactosylceramide. The glycolipid transfer protein-[3H]galactosylceramide complex was isolated by a Sephadex G-75 chromatography. An incubation of the complex with liposomes resulted in the transfer of [3H]galactosylceramide from the complex to the acceptor liposomes. The result indicates that the complex functions as an intermediate in the glycolipid transfer reaction. The protein facilitates the transfer of [3H]galactosylceramide from donor liposomes to acceptor liposomes lacking in glycolipid as well as to acceptor liposomes containing galactosylceramide.     

A new neomycin phosphotransferase II solid phase assay in combination with polyacrylamide sodium dodecylsulphate gel electrophoresis

A new general method for the determination of neomycin phosphotransferase (NPT) II (EC 2.7.1.95) activity in cell extracts after separation in SDS-polyacrylamide gels is described. The enzymatic activity of NPT II is restored after SDS-polyacrylamide gel electrophoresis by incubating the gel for 3 h (20 mM Tris-HCl buffer, pH 7.4). The enzymatic activity is determined by in situ phosphorylation of aminoglycoside antibiotics bound to solid supports and brought into direct contact with the gel surface. A novel, mechanically stable, negatively charged matrix was synthesized for use in this solid phase enzyme assay and compared to phosphocellulose and carboxymethylcellulose paper. This new method allows the easy and exact determination of the molecular weight of any fusion protein with NPT II by assaying the position of the enzymatic activity in the gel and a consecutive immunological reaction following protein transfer onto nitrocellulose membranes.