纳米生物催化的研究现状和发展态势

纳米生物催化领域包括:(ⅰ)利用纳米技术或纳米材料调控生物催化剂的效率;(ⅱ)直接利用纳米材料或技术实现生物催化功能,并拓展生物催化在非友好环境及疾病诊疗中的应用.纳米生物催化已成为纳米生物学重要的研究领域,主要涉及纳米载体固定化酶和纳米材料人工模拟酶(纳米酶).一方面,可以借助纳米技术或材料所具有的特殊纳米效应来增强生物催化剂的效率和稳定性.另一方面,从模拟酶的理念出发,借助纳米材料自身所具有的催化能力,直接实现对生化反应的催化,这类具有酶学特性的纳米酶被视为新一代人工模拟酶.近年来,基于纳米载体固定化酶和纳米酶技术的纳米生物催化已在疾病诊断和治疗、化工制药、环境处理等领域得到了广泛研究,并展示了其具有重要的应用价值.本文简要综述了纳米载体固定化酶和纳米酶的发展历程及应用进展.     

硅藻土固定中性脂肪酶的制备及其性质

以硅藻土为载体,采用吸附法,对脂肪酶进行固定化,研究了固定化条件对固定化脂肪酶的催化活性的影响,得到最佳的固定化条件：给酶量为33374U/g,固定化温度为35℃,pH值为7.5,时间为4h,此时固定化酶的活力约为5833U/g载体。固定化酶的热稳定性较游离酶有了很大的提高,其在80℃以下能保持80%以上的酶活,而游离酶60℃残余酶活仅为5%。最适反应温度和最适pH值也分别由游离酶的40℃上升至50℃和由7上升到7.5。对固定化中的中性脂肪酶在生物柴油合成中的应用也进行了初步研究。     

荧光假单胞菌脂肪酶固定化及催化制备生物柴油的工艺研究

研究了不同因素对制备固定化荧光假单胞菌脂肪酶的影响及固定化酶的酶学性质,并初步探讨了利用该固定化酶制备生物柴油的工艺。以海藻酸钠明胶为复合载体,采用包埋法制备固定化荧光假单胞菌脂肪酶,考察了载酶量、颗粒直径等因子对固定化效果的影响,并用制备的固定化酶进行了酶促酯交换合成生物柴油的工艺研究,考察了反应条件如酶量、反应温度、甲醇流加方式、醇油比等因素对甲酯得率的影响。试验结果表明,制备固定化荧光假单胞菌脂肪酶的最优条件为:每克载体给酶量为300 IU,选用6号注射器针头(内径为0.5 mm);通过酯交换,催化大豆油合成生物柴油的最佳反应工艺参数为:固定化酶25%,醇油比4:1,含水量6%,反应温度40℃;此条件下反应35 h后,甲酯的最高得率可达82%。     

固定化脂肪酶催化制备生物柴油条件优化

本文探讨了以固定化脂肪酶为催化剂催化制备生物柴油中醇油比、水含量、游离脂肪酸酸值和催化剂使用寿命对菜子油酯交换反应的影响,并与以NaOH、固体碱纳米水滑石为催化剂生物柴油的制备条件相比较.研究表明:固定化脂肪酶为催化剂所需最佳醇油比最低,仅为4:1,游离脂肪酸含量对酯交换反应影响甚微,且有较强的抗水性,固定化脂肪酶催化剂可可重复使用6次;NaOH为催化剂酯交换反应抗水性最强,随游离脂肪酸的增加,酯交换转化率显著降低;纳米水滑石为催化剂可重复使用5次,酯交换产物易分离,所得产品完全符合德国生物柴油标准.     

纳米材料固定化酶的研究进展

近年来,纳米技术为酶固定化提供了多种纳米级材料,纳米材料固定化酶不仅具有高的酶负载量,而且具有良好的酶稳定性。本文基于纳米材料固定化酶,对纳米材料的种类进行了总结,分析了纳米材料对固定化酶性能的影响,并介绍了纳米级固定化方法及纳米材料固定化酶在生物转化、生物传感器、生物燃料电池等领域的应用。     

大孔树脂固定化脂肪酶及在微水相中催化合成生物柴油的研究

以不同大孔树脂吸附法固定化假丝酵母99_125脂肪酶,在微水有机相中的应用表明非极性树脂NKA是最佳的固定化载体。分别以正庚烷及磷酸盐缓冲液作为固定化介质,发现在正庚烷介质中树脂NKA的固定化效率能够达到98.98%,与采用磷酸盐缓冲液作为介质相比,固定化酶的水解活力和表观酶活回收率分别提高了4.07和3.43倍。考察了在微水相中固定化酶催化合成生物柴油的催化性能,结果表明,在给酶量为1.92∶1(初始酶粉与树脂的质量比),pH值为7.4,体系水含量为15%(水与油的质量比),反应温度为40℃条件下,固定化酶具有最佳的催化能力;以正庚烷为介质固定化脂肪酶催化合成生物柴油,采用三次流加甲醇的方式,单批转化率最高达到97.3%,连续反应19批以后转化率仍保持为70.2%。     

二氧化硅纳米材料固定中性脂肪酶的条件优化及其特性

以二氧化硅纳米材料为载体,采用吸附法对脂肪酶进行固定化,研究了不同条件对固定化脂肪酶的催化活性的影响,得到最佳的固定化条件:给酶量为28300U/g,固定化温度为45oC,pH值为7.5,时间为10h,此时固定化酶的活力约为3867U/g载体。固定化酶的最适反应温度为45oC,比游离酶的反应温度高5oC,最适pH下降到5.5,低于游离酶的反应pH(pH7)。固定化酶的热稳定性和pH稳定性较游离酶有了很大的提高,其在70oC以下能保持70%以上的酶活力,而游离酶在50oC下残余酶活力仅为30%。在pH5～8的范围内,固定化酶的酶活力能保持50%以上,而游离酶只能保持20%左右。用固定化的中性脂肪酶催化不同的油品,即大豆油、菜籽油及泔水油生产生物柴油,菜籽油的酯化率最高。     

磁性纳米粒子固定化酶技术研究进展

磁性纳米粒子因兼具磁学特性和纳米材料独特性能,被广泛应用于各个领域。就磁性纳米粒子的种类、特性、制备和表面修饰四个方面展开介绍,综述了脂肪酶、漆酶、淀粉酶及其复合酶等生物酶固定化酶技术的最新研究动态,针对磁性纳米粒子在固定化酶技术的研究应用现状进行了总结,以期为磁性纳米粒子固定化酶技术的应用研究提供参考。     

间歇及连续式固定化酶反应生产生物柴油

探讨了利用本实验室自制的Candida sp99．125脂肪酶转酯化合成生物柴油的过程。在利用间歇式反应得到最佳反应条件的情况下利用固定床反应器生产生物柴油,经过初步优化的试验结果表明,在采用分级流加甲醇下,生物柴油的转化率可以达到93％左右,并且固定化酶的使用寿命超过480h。     

脂肪酶催化制备生物柴油的研究进展

生物柴油作为一种可再生的清洁能源,以其良好的环境效应受到越来越多的关注。酶法生产生物柴油具有化学催化法不可比拟的优越性,是工业化生产的发展方向。本文综述了利用固定化脂肪酶、游离酶、全细胞生物催化剂制备生物柴油的研究与应用进展,并探讨了我国生物柴油产业化发展的困境和对策。     

Biodiesel production with immobilized lipase: A review

Fatty acid alkyl esters, also called biodiesel, are environmentally friendly and show great potential as an alternative liquid fuel. Biodiesel is produced by transesterification of oils or fats with chemical catalysts or lipase. Immobilized lipase as the biocatalyst draws high attention because that process is “greener”. This article reviews the current status of biodiesel production with immobilized lipase, including various lipases, immobilization methods, various feedstocks, lipase inactivation caused by short chain alcohols and large scale industrialization. Adsorption is still the most widely employed method for lipase immobilization. There are two kinds of lipase used most frequently especially for large scale industrialization. One is Candida antartica lipase immobilized on acrylic resin, and the other is Candida sp. 99–125 lipase immobilized on inexpensive textile membranes. However, to further reduce the cost of biodiesel production, new immobilization techniques with higher activity and stability still need to be explored.     

Biodiesel production from pomace oil by using lipase immobilized onto olive pomace

In the present work, microbial lipase from Thermomyces lanuginosus was immobilized by covalent binding onto olive pomace. Immobilized support material used to produce biodiesel with pomace oil and methanol. The properties of the support and immobilized derivative were evaluated by scanning electron microscopy (SEM). The maximum immobilization of T. lanuginosus was obtained as 18.67 mg/g support and the highest specific activity was 10.31 U/mg protein. The properties of immobilized lipase were studied. The effects of protein concentration, pH and buffer concentration on the immobilization and lipase activity were investigated. Biodiesel production using the immobilized lipase was realized by a three-step addition of methanol to avoid strong substrate inhibition. Under the optimized conditions, the maximum biodiesel yield was 93% at 25 °C in 24 h reaction. The immobilized enzyme retained its activity during the 10 repeated batch reactions.     

Evaluation of biodiesel production using lipase immobilized on magnetic silica nanocomposite particles of various structures

Nonporous and mesoporous silica-coated magnetite cluster nanocomposites particles were fabricated with various silica structures in order to develop a desired carrier for the lipase immobilization and subsequent biodiesel production. Lipase from Pseudomonas cepacia was covalently bound to the amino-functionalized particles using glutaraldehyde as a coupling agent. The hybrid systems that were obtained exhibited high stability and easy recovery regardless of the silica structure, following the application of an external magnetic field. The immobilized lipases were then used as the recoverable biocatalyst in a transesterification reaction to convert the soybean oil to biodiesel with methanol. Enzyme immobilization led to higher stabilities and conversion values as compared to what was obtained by the free enzyme. Furthermore, the silica structure had a significant effect on stability and catalytic performance of immobilized enzymes. In examining the reusability of the biocatalysts, the immobilized lipases still retained approximately 55% of their initial conversion capability following 5 times of reuse.     

酶法合成生物柴油工业化研究进展

介绍了北京化工大学近年来酶法合成生物柴油工业化研究的结果。主要内容包括以下几个方面:高产脂肪酶菌株的选育、脂肪酶发酵工艺优化及放大、脂肪酶固定化方法、酶反应器放大、生物柴油分离精制及副产物甘油综合利用。该脂肪酶假丝酵母Candida sp.99-125在5 m3罐发酵活力不低于8 000 IU/mL,然后将该脂肪酶吸附固定在织物膜上并进行表面改性,用于搅拌罐式反应器生产每吨甲酯的需酶量仅为4.2 kg,产品经分离精制调质后,其各项指标完全符合德国生物柴油生产标准。副产物甘油可用于1,3-丙二醇发酵,30 L发酵罐中1,3-丙二醇的产量可达到76.1 g/L。     

Biodiesel production from sunflower,soybean, and waste cooking oils by transesterification using lipase immobilized onto a novel microporous polymer

This study aims at carrying out lipase-catalyzed synthesis of fatty acid methyl esters (biodiesel) from various vegetable oils using lipase immobilized onto a novel microporous polymeric matrix (MPPM) as a low-cost biocatalyst. The research is focused on three aspects of the process: (a) MPPM synthesis (monolithic, bead, and powder forms), (b) microporous polymeric biocatalyst (MPPB) preparation by immobilization of lipase onto MPPM, and (c) biodiesel production by MPPB. Experimental planning of each step of the study was separately carried out in accordance with design of experiment (DoE) based on Taguchi methodology.Microporous polymeric matrix (MPPM) containing aldehyde functional group was synthesized by polyHIPE technique using styrene, divinylbenzene, and polyglutaraldehyde. Thermomyces lanuginosus lipase was covalently attached onto MPPM with 80%, 85%, and 89% immobilization efficiencies using bead, powder, and monolithic forms, respectively. Immobilized enzymes were successfully used for the production of biodiesel using sunflower, soybean, and waste cooking oils. It was shown that immobilized enzymes retain their activities during 10 repeated batch reactions at 25 °C, each lasting 24 h. Since the developed novel method is simple yet effective, it could have a potential to be used industrially for the production of chemicals requiring immobilized lipases.     

Production of Biodiesel Using Immobilized Lipase—A Critical Review

Increase in volume of biodiesel production in the world scenario proves that biodiesel is accepted as an alternative to conventional fuel. Production of biodiesel using alkaline catalyst has been commercially implemented due to its high conversion and low production time. For the product and process development of biodiesel, enzymatic transesterification has been suggested to produce a high purity product with an economic, environment friendly process at mild reaction conditions. The enzyme cost being the main hurdle can be overcome by immobilization. Immobilized enzyme, which has been successfully used in various fields over the soluble counterpart, could be employed in biodiesel production with the aim of reducing the production cost by reusing the enzyme. This review attempts to provide an updated compilation of the studies reported on biodiesel production by using lipase immobilized through various techniques and the parameters, which affect their functionality.     

Perspectives for biotechnological production of biodiesel and impacts

In recent years, biological ways for biodiesel production have drawn an increasing attention and compared to chemical approaches, lipase-mediated alcoholysis for biodiesel production has many advantages. Currently, there are extensive reports about enzyme-mediated alcoholysis for biodiesel production, and based on the application forms of biocatalyst, the related research can be classified into immobilized lipase, whole cell catalyst, and liquid lipase-mediated alcoholysis for biodiesel production, respectively. This mini-review is focusing on the study of the aforementioned three forms of biocatalyst for biodiesel production, as well as its impacts and prospects.     

Lipase catalyzed transesterification of soybean oil using ethyl acetate,an alternative acyl acceptor

Methanol, the acyl acceptor usually used in the commercial process of biodiesel production, is associated with some problems such as immiscibility with oils and lipase deactivation. To overcome these barriers, ethyl acetate was proposed as an alternative acyl acceptor for the production of biodiesel from soybean oil using an immobilized lipase, Novozym 435, Ethyl acetate mixed well with soybean oil, and only slightly inhibited the lipase activity by 5%. The effects of various environmental parameters, such as the composition of soybean oil and ethyl acetate, lipase content, and reaction temperature, were investigated to determine the optimal conditions for biodiesel production. As a result, the highest biodiesel production yield, 63.3 (±0.6)%, was obtained by using an ethyl acetate and soybean oil mixture with a 6∶1 molar ratio, with 8% of the immobilized lipase based on the weight of oil added at 70°C and 600 rpm.