一种基于适配器连接介导的等位基因特异性扩增法测定多重SNP

建立了一种基于DNA适配器连接介导的等位基因特异性扩增法测定多重SNP。以CYP2D6基因中的5个SNP位点（100C>T,1661G>C,1758G>T,2470T>C和2850C>T）为例,用PCR法预扩增得一段含所有待测SNP位点的长片段,然后用限制性内切酶将其消化成短片段,在连接酶的作用下与设计的DNA适配器（adapter）相连;该适配器的一端与限制性内切酶降解后留下的粘性末端相同,另一端带有一段公共序列。在两管中加入与适配器连接的片段作为PCR扩增模板,并分别加入SNP特异性引物和一种适配器特异性的通用引物进行PCR扩增,最后用凝胶电泳法分离PCR扩增产物。由于每管与SNP的两种特异性引物中的一种对应,可以根据每管中扩增片段的大小判断SNP的类型。通过凝胶电泳法可以一次分离与5种SNP类型相对应的引物特异性延伸反应产物;采用该法成功测定了20名健康中国人的CYP2D6基因中5个SNP位点的基因多态性,与限制性片段长度多态性法（RFLP）测定结果完全一致。该方法采用n+1种引物（n种SNP特异性引物和一种通用引物）进行n重PCR反应,极大提高了PCR反应的特异性,结果准确,可用于同时测定多个SNP位点。

     

基于荧光定量PCR扩增反应的SNP测定法

建立一种利用荧光定量PCR扩增反应进行单核苷酸多态性(SNP)快速测定的方法.以人β肾上腺素受体2基因中的Arg16Gly为研究对象,利用荧光染料SYBRGreenⅠ标记定量PCR产物,通过PCR生长曲线和融解曲线分析结果进行SNP分型.为提高SNP测定的特异性,分别在野生型和突变型等位基因的特异性引物3′端倒数第3个碱基位置,引入了一个人为错配碱基,使引物的错误延伸率显著降低,大大提高了SNP分析的准确性.通过DNA测序验证荧光定量PCR对β肾上腺素受体2基因中Arg16Gly分型结果的准确率.实验结果表明,所建立的方法操作简便,结果准确,适合进行大规模样品的SNP检测工作.     

高保真酶特异性检测大鼠SNP基因型新方法

目的应用高保真酶（Pfu）和3’末端修饰引物在单管双向等位基因特异性扩增（SB-ASA）中区分SNP基因型,建立高保真酶特异性检测SNP基因型的新方法。方法选取近交系大鼠SNP位点,以RS8149053为例,设计两个外部引物和两个等位基因特异性引物,四引物3’末端进行硫代磷酸化修饰,应用高保真聚合酶（Pfu）进行特异性扩增,扩增结果测序验证其可靠性。结果在RS8149053 SNP位点（C/T）上,等位基因型CC扩增出179 bp目的片段,基因型TT扩增出597 bp目的片段,基因型不同则扩增出分子量不同的片段,目的条带测序结果与Rat Genome Database数据库基因型结果一致,高保真酶扩增结果稳定且特异性强。结论高保真酶等位基因特异性扩增技术能有效降低假阳性率,是一种快速、特异的SNP基因分型新方法。     

应用基于适配器连接介导的等位基因特异性扩增法检测LRRK2基因的单核苷酸多态性

目的：应用基于适配器连接介导的等位基因特异性扩增法（Adapter Ligation—mediated Allele-specific Amplification,简称ALM-ASA）技术,检测与帕金森病（PD）发病相关的LRRK2基因中的4个SNP位点（6055G〉A,7153G〉A,4321C〉T和2264C〉T）,探讨该法用于筛查帕金森病相关SNP位点的可行性,研究多个SNP住点同时检测的准确性和可靠性。方法：运用ALM—ASA法原理,改进使用多重PCR法代替单一预扩增法,使用4对引物在单管中预扩增含所待测SNP位点的四段片段,通过酶切、酶连和PCR特异性扩增检测判断SNP的类型。经PCR体外定点突变实验制备的相应位点的突变阳性片段,检验方法的准确性和可靠性。结果：采用该法成功测定了20名PD病人和20名健康中国人的LRRK2基因中最受关注的4个SNP位点的多态性。并随机对其中10分样本的检测结果以测序法检测进行验证,结果完全一致。结论：ALM-ASA法极大提高了PCR反应的特异性,是一种准确、可靠,且费用低廉的SNP筛查方法,可推广应用于临床和实验室进行与PD有关的单核苷酸多态性的筛查检测。     

巨型引物PCR法对抗CD3改型单链抗体

亲和力是影响改型单链抗体应用于临床的重要因素之一.利用巨型引物PCR定点诱变方法,设计并化学合成出两组含多个突变位点的简并引物,在第一轮PCR中使用简并引物分别扩增出含突变碱基的两条特异性的DNA片段,即巨型引物,将其经琼脂糖凝胶电泳分离纯化后,作为3′和5′的两端引物应用于第二轮PCR反应中.通过改变标准PCR反应条件,调整引物与模板的浓度,扩增出特异性较强的目的DNA条带.PCR产物经回收后,进行DNA测序.测序结果表明利用该方法扩增得到特异的抗CD3改型单链抗体的突变体库.     

多重等位基因特异性扩增—— 微流控芯片电泳法同时测定多个单核苷酸多态性位点

文章以微流控芯片电泳为检测平台, 建立了一种基于DNA适配器连接介导的多重等位基因特异性扩增同时测定多个单核苷酸多态性(SNP)位点的方法。以白细胞介素1β(IL1B)基因中的7个SNP位点(794C>T、1274C>T、2143T>C、2766T>del、3298G>A、5200G>A和5277C>T)为检测对象, 通过PCR预扩增得一段含该7个待测SNP位点的长片段; 用限制性内切酶MboⅠ将其消化成短片段, 再与DNA适配器(adapter)相连; 以连接产物为模板, 在两管中分别用7条等位基因特异性引物和一条公用引物进行7重等位基因特异性扩增; 最后用微流控芯片电泳法分离等位基因特异性扩增产物, 根据两管扩增产物的芯片电泳图谱中扩增片段的大小判断SNP的类型。采用本法成功测定了48名健康中国人的IL1B基因上的7个SNP位点, 与聚合酶链反应-限制性片段长度多态性法(PCR-RFLP)和测序法测定结果完全一致。本法结果准确, 可用于同时测定多个SNP位点; 以微流控芯片电泳作为检测平台, 分析速度快, 样品需要量少; 借助于自制筛分凝胶和重复使用芯片, 使得SNP分析成本大大降低。     

四引物扩增受阻突变体系PCR快速测定绵羊 BMPR-IB基因型方法的建立

四引物ARMS PCR是检测SNP有效、快速、简便的方法.绵羊BMPR-lB基因是控制Booroola绵羊多胎性状的主效基因,此研究目的在于建立一种对BMPR-IB基因四引物ARMS PCR检测方法.根据四引物ARMS PCR技术原理,在绵羊BMPR-IB基因突变位点(A746G)设计一对特异性引物,并在突变点两侧设计一对参照引物,用来扩增含有突变点的DNA片段,可在一步PCR反应中根据电泳图谱准确判断绵羊个体的BMPR-IB基因型,对比PCR-RFLP检测结果表明,所建立的方法简单,操作简便,大大提高了检测效率.     

等位基因特异PCR技术的研究与应用

生物的单核苷酸多态性(Single-nucleotide polymorphism,SNP)具有数量多、分布广、易于分型、稳定性强等优点,很适合于用做分子标记.等位基因特异PCR(Allele-specific PCR,AS-PCR)是根据SNP位点设计3'末端与SNP位点碱基互补或错配的特异PCR引物,通过凝胶电泳等方法检测PCR扩增产物的有或无,从而检测基因型中SNP的一种技术.经过不断地改进与完善,基于SNP的等位基因特异PCR标记已逐渐成为一种快速、简便、低成本、可靠、高通量的检测基因型SNP的方法.本文应用等位基因特异PCR技术,根据小麦TaDREB1基因在旱选10和鲁麦14的120(C→A)SNP成功地开发了一个SNP分子标记,证明了该方法的有效性和可行性.     

单管双向等位基因专一性扩增方法在近交系小鼠遗传检测中的应用

目的将新近建立的单管双向等位基因专一性扩增(single-tube bi-directional allele specific amplification,SB-ASA)方法用于分析近交系小鼠基因组中的单核苷酸多态性(SNP)。方法以5个近交系小鼠为研究对象,采用SB-ASA方法对其16个SNP位点进行检测,并通过双盲实验和测序验证该方法的可靠性;且考察了该方法中PCR反应各成分及扩增条件对结果的影响。结果16个SNP位点,SB-ASA都成功地对5个品系小鼠进行了分型,与测序结果完全一致;双盲实验结果显示通过3个SNP位点即可鉴别5个品系。结论SB-ASA方法可用于近交系小鼠SNP的遗传检测,可望作为一种新的分子生物学遗传检测方法推广应用。     

油棕种壳厚度控制基因SHELL的SNP分子标记开发

油棕属棕榈科多年生木本油料作物,果实含油量高达50%,且单位面积产油量高,享有"世界油王"美誉。油棕果实由外果皮、中果皮、内果皮(种壳)、种子四个部分组成,产油部分主要是中果皮和种子,其中种壳厚度是影响果实含油量的重要因素。SHELL基因控制种壳厚度,是一类MADS-box同源基因,SHELL基因在厚壳种和无壳种中的变异主要是第一个外显子上的两个SNP位点。该研究根据两个SNP位点进行特异标记开发,根据已知的油棕SHELL基因的序列,设计了4对SNP引物。4对SNP引物以2个SNP位点设计,每个SNP位点设计2对SNP标记,并均在引物3'端第二位引入强错配碱基。以2份薄壳种油棕材料和2份厚壳种油棕材料DNA为模板,扩增筛选油棕SHELL基因SNP引物。通过PCR扩增发现,设计的SHELL基因特异SNP标记EgSh(N)-f/EgSh(SNP)-2r能够鉴别油棕厚壳种和薄壳种。再用24株油棕树进行特异性验证,发现该标记能较准确地判断油棕的厚薄壳。该研究结果表明SNP标记EgSh(N)-f/EgSh(SNP)-2r可用来进行油棕种质资源早期分子鉴定,为高产油棕品种选育提供了技术支撑。     

Development of an automated SNP analysis method using a paramagnetic beads handling robot

Biological and medical importance of the single nucleotide polymorphism (SNP) has led to development of a wide variety of methods for SNP typing. Aiming for establishing highly reliable and fully automated SNP typing, we have developed the adapter ligation method in combination with the paramagnetic beads handling technology, Magtration(R). The method utilizes sequence specific ligation between the fluorescently labeled adapter and the sample DNAs at the cohesive end produced by a type IIS restriction enzyme. Evaluation of the method using human genomic DNA showed clear discrimination of the three genotypes without ambiguity using the same reaction condition for any SNPs examined. The operations following PCR amplification were automatically performed by the Magtration(R)-based robot that we have previously developed. Multiplex typing of two SNPs in a single reaction by using four fluorescent dyes was successfully preformed at the almost same sensitivity and reliability as the single typing. These results demonstrate that the automated paramagnetic beads handling technology, Magtration(R), is highly adaptable to the automated SNP analysis and that our method best fits to an automated in-house SNP typing for laboratory and medical uses.     

Apolipoprotein E genotyping by multiplex tetra-primer amplification refractory mutation system PCR in single reaction tube

Apolipoprotein E (APOE) plays a critical role in lipoprotein metabolism by binding to both low-density lipoprotein and APOE receptors. The APOE gene has three allelic forms, epsilon2, epsilon3, and epsilon4, which encode different isoforms of the APOE protein. In this study, we have developed a new genotyping method for APOE. Our multiplex tetra-primer amplification refractory mutation system (multiplex T-ARMS) polymerase chain reaction (PCR) was performed in a single reaction tube with six primers consisting of two common primers and two specific primers for each of two single nucleotide polymorphism (SNP) sites. We obtained definitive electropherograms that showed three (epsilon2/epsilon2, epsilon3/epsilon3, and epsilon4/epsilon4), four (epsilon2/epsilon3 and epsilon3/epsilon4), and five (epsilon2/epsilon4) amplicons by multiplex T-ARMS PCR in a single reaction tube. Multiplex T-ARMS PCR for APOE genotyping is a simple and accurate method that requires only a single PCR reaction, without any another treatments or expensive instrumentation, to simultaneously identify two sites of single nucleotide polymorphisms.     

Multiplex single nucleotide polymorphism genotyping by adapter ligation-mediated allele-specific amplification

An improved approach for increasing the multiplex level of single nucleotide polymorphism (SNP) typing by adapter ligation-mediated allele-specific amplification (ALM-ASA) has been developed. Based on an adapter ligation, each reaction requires n allele-specific primers plus an adapter-specific primer that is common for all SNPs. Thus, only n+1 primers are used for an n-plex PCR amplification. The specificity of ALM-ASA was increased by a special design of the adapter structure and PCR suppression. Given that the genetic polymorphisms in the liver enzyme cytochrome P450 CYP2D6 (debrisoquine 4-hydroxylase) have profound effects on responses of individuals to a particular drug, we selected 17 SNPs in the CYP2D6 gene as an example for the multiplex SNP typing. Without extensive optimization, we successfully typed 17-plex SNPs in the CYP2D6 gene by ALM-ASA. The results for genotyping 70 different genome samples by the 17-plex ALM-ASA were completely consistent with those obtained by both Sanger's sequencing and PCR restriction fragment length polymorphism (PCR-RFLP) analysis. ALM-ASA is a potential method for SNP typing at an ultra-low cost because of a high multiplex level and a simple optimization step for PCR. High-throughput SNP typing could be readily realized by coupling ALM-ASA with a well-developed automation device for sample processing.     

Integrated allele-specific polymerase chain reaction-capillary electrophoresis microdevice for single nucleotide polymorphism genotyping

An integrated allele-specific (AS) polymerase chain reaction (PCR) and capillary electrophoresis (CE) microdevice has been developed for multiplex single nucleotide polymorphism (SNP) genotyping on a portable instrumentation, which was applied for on-site identification of HANWOO (Korean indigenous beef cattle). Twelve sets of primers were designed for targeting beef cattle's eleven SNP loci for HANWOO verification and one primer set for a positive PCR control, and the success rate for identification of HANWOO was demonstrated statistically. The AS PCR and CE separation for multiplex SNP typing was carried out on a glass-based microchip consisting of four layers: a microchannel plate for microfluidic control, a Pt-electrode plate for a resistance temperature detector (RTD), a poly(dimethylsiloxane) (PDMS) membrane and a manifold glass for microvalve function. The operation of the sample loading, AS PCR, microvalve, and CE on a chip was automated with a portable genetic analyzer, and the laser-induced fluorescence detection was performed on a miniaturized fluorescence detector. The blind samples were correctly identified as a HANWOO by showing one or two amplicon peaks in the electropherogram, while the imported beef cattle revealed more than five peaks. Our genetic analysis platform provides rapid, accurate, and on-site multiplex SNP typing.     

Pyrosequencing protocol using a universal biotinylated primer for mutation detection and SNP genotyping

DNA sequencing has markedly changed the nature of biomedical research, identifying millions of polymorphisms along the human genome that now require further analysis to study the genetic basis of human diseases. Among the DNA-sequencing platforms available, Pyrosequencing has become a useful tool for medium-throughput single nucleotide polymorphism (SNP) genotyping, mutation detection, copy-number studies and DNA methylation analysis. Its 96-well genotyping format allows reliable results to be obtained at reasonable costs in a few minutes. However, a specific biotinylated primer is usually required for each SNP under study to allow the capture of single-stranded DNA template for the Pyrosequencing assay. Here, we present an alternative to the standard labeling of PCR products for analysis by Pyrosequencing that circumvents the requirement of specific biotinylated primers for each SNP of interest. This protocol uses a single biotinylated primer that is simultaneously incorporated into all M13-tagged PCR products during the amplification reaction. The protocol covers all steps from the PCR amplification and capture of single-stranded template, its preparation, and the Pyrosequencing assay itself. Once the correct primer stoichiometry has been determined, the assay takes around 2 h for PCR amplification, followed by 15-20 min (per plate) to obtain the genotypes.     

Specific authentication of Hippocampus based on SNP markers

Seahorses, which are used as traditional Chinese medicine, have large market demands and premium price. Because of overfishing, many seahorse species are endangered and listed in IUCN Red List. The purpose of this study was to develop a simple, rapid and reliable molecular method for specific authentication of seahorse species. Cytochrome c oxidase subunit I (COI) sequences were analyzed for molecular authentication of seahorses in this study. Many single nucleotide polymorphism (SNP) sites were detected among COI sequences of nine seahorse species. Based on the SNP sites, four pairs of modified specific primers were designed respectively for authentication of Hippocampus kuda, Hippocampus japonicus, Hippocampus trimaculatus and Hippocampus kelloggi using allele-specific PCR. Moreover, a multiplex allele-specific PCR for simultaneous authentication of H. kuda, H. japonicus and H. trimaculatus was also developed. The study showed that allele-specific PCR required no sequencing and electrophoresis, and the only necessity is to add fluorochrome into PCR products. Hence the whole authentication procedure only takes about 1.5 h. This work provides an effective method for rapid and reliable identification of seahorse species.     

Single-reaction for SNP Genotyping on Agarose Gel by Allele-specific PCR in Black Poplar (Populus nigra L.)

The wide development of single nucleotide polymorphism (SNP) markers also in non-model species increases the need for inexpensive methods that do not require sophisticated equipment and time for optimization. This work presents a new method for polymerase chain reaction (PCR) amplification of multiple specific alleles (PAMSA), which allows efficient discrimination of SNP polymorphisms in one reaction tube with standard PCR conditions. This improved PAMSA requires only three unlabeled primers: a common reverse primer and two allele-specific primers having a tail of different length to differentiate the two SNP alleles by the size of amplification products on agarose gel. A destabilizing mismatch within the five bases of the 3′ end is also added to improve the allele specificity. To validate the accuracy of this method, 94 full-sib individuals were genotyped with three SNPs and compared to the genotypes obtained by cleaved amplified polymorphic sequence (CAPS) or derived CAPS. This method is flexible, inexpensive, and well suited for high throughput and automated genotyping.