Electrochemical Investigation of a Microbial Solar Cell Reveals a Nonphotosynthetic Biocathode Catalyst

Microbial solar cells (MSCs) are microbial fuel cells (MFCs) that generate their own oxidant and/or fuel through photosynthetic reactions. Here, we present electrochemical analyses and biofilm 16S rRNA gene profiling of biocathodes of sediment/seawater-based MSCs inoculated from the biocathode of a previously described sediment/seawater-based MSC. Electrochemical analyses indicate that for these second-generation MSC biocathodes, catalytic activity diminishes over time if illumination is provided during growth, whereas it remains relatively stable if growth occurs in the dark. For both illuminated and dark MSC biocathodes, cyclic voltammetry reveals a catalytic-current–potential dependency consistent with heterogeneous electron transfer mediated by an insoluble microbial redox cofactor, which was conserved following enrichment of the dark MSC biocathode using a three-electrode configuration. 16S rRNA gene profiling showed Gammaproteobacteria, most closely related to Marinobacter spp., predominated in the enriched biocathode. The enriched biocathode biofilm is easily cultured on graphite cathodes, forms a multimicrobe-thick biofilm (up to 8.2 μm), and does not lose catalytic activity after exchanges of the reactor medium. Moreover, the consortium can be grown on cathodes with only inorganic carbon provided as the carbon source, which may be exploited for proposed bioelectrochemical systems for electrosynthesis of organic carbon from carbon dioxide. These results support a scheme where two distinct communities of organisms develop within MSC biocathodes: one that is photosynthetically active and one that catalyzes reduction of O₂ by the cathode, where the former partially inhibits the latter. The relationship between the two communities must be further explored to fully realize the potential for MSC applications.     

Cathodes as electron donors for microbial metabolism: Which extracellular electron transfer mechanisms are involved?

This review illuminates extracellular electron transfer mechanisms that may be involved in microbial bioelectrochemical systems with biocathodes. Microbially-catalyzed cathodes are evolving for new bioprocessing applications for waste(water) treatment, carbon dioxide fixation, chemical product formation, or bioremediation. Extracellular electron transfer processes in biological anodes, were the electrode serves as electron acceptor, have been widely studied. However, for biological cathodes the question remains: what are the biochemical mechanisms for the extracellular electron transfer from a cathode (electron donor) to a microorganism? This question was approached by not only analysing the literature on biocathodes, but also by investigating known extracellular microbial oxidation reactions in environmental processes. Here, it is predicted that in direct electron transfer reactions, c-type cytochromes often together with hydrogenases play a critical role and that, in mediated electron transfer reactions, natural redox mediators, such as PQQ, will be involved in the bioelectrochemical reaction. These mechanisms are very similar to processes at the bioanode, but the components operate at different redox potentials. The biocatalyzed cathode reactions, thereby, are not necessarily energy conserving for the microorganism.     

Microbial fuel cells: novel biotechnology for energy generation

Microbial fuel cells (MFCs) provide new opportunities for the sustainable production of energy from biodegradable, reduced compounds. MFCs function on different carbohydrates but also on complex substrates present in wastewaters. As yet there is limited information available about the energy metabolism and nature of the bacteria using the anode as electron acceptor; few electron transfer mechanisms have been established unequivocally. To optimize and develop energy production by MFCs fully this knowledge is essential. Depending on the operational parameters of the MFC, different metabolic pathways are used by the bacteria. This determines the selection and performance of specific organisms. Here we discuss how bacteria use an anode as an electron acceptor and to what extent they generate electrical output. The MFC technology is evaluated relative to current alternatives for energy generation.     

Direct enrichment of perchlorate-reducing microbial community for efficient electroactive perchlorate reduction in biocathodes

Biological reduction of perchlorate (ClO₄ ^?) has emerged as a promising solution for the removal of perchlorate in contaminated water and soils. In this work, we demonstrate a simple process to enrich perchlorate-reducing microbial communities separately using acetate as electron donor and the municipal aerobic membrane bioreactor sludge as inoculum. Inoculation of cathodes in microbial fuel cells (MFCs) with these enrichments, and further electrochemical enrichment at constant resistance operation of the MFCs, led to perchlorate-reducing biocathodes with peak reduction rates of 0.095 mM/day (2 mg/m²/day). Analysis of the microbial diversity of perchlorate-reducing biocathodes using PCR-DGGE revealed unique community profiles when compared to the denitrifying biocathode communities. More importantly, the total time taken for enrichment of the electroactive communities was reduced from several months reported previously in literature to less than a month in this work.     

Use of Pseudomonas species producing phenazine-based metabolites in the anodes of microbial fuel cells to improve electricity generation

The rate of anodic electron transfer is one of the factors limiting the performance of microbial fuel cells (MFCs). It is known that phenazine-based metabolites produced by Pseudomonas species can function as electron shuttles for Pseudomonas themselves and also, in a syntrophic association, for Gram-positive bacteria. In this study, we have investigated whether phenazine-based metabolites and their producers could be used to improve the electricity generation of a MFC operated with a mixed culture. Both anodic supernatants obtained from MFCs operated with a Pseudomonas strain (P-PCA) producing phenazine-1-carboxylic acid (PCA) and those from MFCs operated with a strain (P-PCN) producing phenazine-1-carboxamide (PCN) exerted similarly positive effects on the electricity generation of a mixed culture. Replacing supernatants of MFCs operated with a mixed culture with supernatants of MFCs operated with P-PCN could double the currents generated. Purified PCA and purified PCN had similar effects. If the supernatant of an engineered strain overproducing PCN was used, the effect could be maintained over longer time courses, resulting in a 1.5-fold increase in the production of charge. Bioaugmentation of the mixed culture MFCs using slow release tubes containing P-PCN not only doubled the currents but also maintained the effect over longer periods. The results demonstrated the electron-shuttling effect of phenazine-based compounds produced by Pseudomonas species and their capacity to improve the performance of MFCs operated with mixed cultures. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Electrochemical surface modification of carbon mesh anode to improve the performance of air-cathode microbial fuel cells

A convenient and promising alternative to surface modification of carbon mesh anode was fulfilled by electrochemical oxidation in the electrolyte of nitric acid or ammonium nitrate at ambient temperature. It was confirmed that such an anode modification method was low cost and effective not only in improving the efficiency of power generation in microbial fuel cells (MFCs) for synthetic wastewater treatment, but also helping to reduce the period for MFCs start-up. The MFCs with anode modification in electrolyte of nitric acid performed the best, achieving a Coulombic efficiency enhancement of 71 %. As characterized, the electrochemical modification resulted in the decrease of the anode potential and internal resistance but the increase of current response and nitrogen-containing and oxygen-containing functional groups on the carbon surface, which might contribute to the enhancement on the performances of MFCs.     

Microbial fuel cell (MFC) power performance improvement through enhanced microbial electrogenicity

Within the past 5?years, tremendous advances have been made to maximize the performance of microbial fuel cells (MFCs) for both “clean” bioenergy production and bioremediation. Most research efforts have focused on parameters including (i) optimizing reactor configuration, (ii) electrode construction, (iii) addition of redox-active, electron donating mediators, (iv) biofilm acclimation and feed nutrient adjustment, as well as (v) other parameters that contribute to enhanced MFC performance. To date, tremendous advances have been made, but further improvements are needed for MFCs to be economically practical. In this review, the diversity of electrogenic microorganisms and microbial community changes in mixed cultures are discussed. More importantly, different approaches including chemical/genetic modifications and gene regulation of exoelectrogens, synthetic biology approaches and bacterial community cooperation are reviewed. Advances in recent years in metagenomics and microbiomes have allowed researchers to improve bacterial electrogenicity of robust biofilms in MFCs using novel, unconventional approaches. Taken together, this review provides some important and timely information to researchers who are examining additional means to enhance power production of MFCs.     

N-Phenyl and N-phenylalkyl-maleimides acting against Candida spp.: time-to-kill, stability, interaction with maleamic acids

N-Phenyl and N-phenylalkyl maleimides (alkyl chain=(CH(2))n; n=0-4) and their respective open derivatives (maleamic acids) were evaluated against Candida spp. with the microbroth dilution method following the guidelines of CLSI (formely NCCLS). MIC values of maleimides without pre-incubation and submitted to different pre-incubation times into the growth media, time-to-kill studies as well as a time-dependent UV-spectroscopy study of the maleimides in water, led to determine that maleimides display antifungal activities with their intact maleimide ring, being in addition their activities not dependent on the length of the alkyl chain. They are not only fungistatic but fungicidal with very low MICs and MFCs, displaying strong fungicide activities not only against standardized but also clinical isolates of Candida albicans and non-albicans Candida spp.     

Enzymatic hydrolysis of cellulose coupled with electricity generation in a microbial fuel cell

Electricity can be directly generated by bacteria in microbial fuel cells (MFCs) from a variety of biodegradable substrates, including cellulose. Particulate materials have not been extensively examined for power generation in MFCs, but in general power densities are lower than those produced with soluble substrates under similar conditions likely as a result of slow hydrolysis rates of the particles. Cellulases are used to achieve rapid conversion of cellulose to sugar for ethanol production, but these enzymes have not been previously tested for their effectiveness in MFCs. It was not known if cellulases would remain active in an MFC in the presence of exoelectrogenic bacteria or if enzymes might hinder power production by adversely affecting the bacteria. Electricity generation from cellulose was therefore examined in two-chamber MFCs in the presence and absence of cellulases. The maximum power density with enzymes and cellulose was 100 +/- 7 mW/m(2) (0.6 +/- 0.04 W/m(3)), compared to only 12 +/- 0.6 mW/m(2) (0.06 +/- 0.003 W/m(3)) in the absence of the enzymes. This power density was comparable to that achieved in the same system using glucose (102 +/- 7 mW/m(2), 0.56 +/- 0.038 W/m(3)) suggesting that the enzyme successfully hydrolyzed cellulose and did not otherwise inhibit electricity production by the bacteria. The addition of the enzyme doubled the Coulombic efficiency (CE) to CE = 51% and increased COD removal to 73%, likely as a result of rapid hydrolysis of cellulose in the reactor and biodegradation of the enzyme. These results demonstrate that cellulases do not adversely affect exoelectrogenic bacteria that produce power in an MFC, and that the use of these enzymes can increase power densities and reactor performance.     

Influence of external resistance on electrogenesis, methanogenesis, and anode prokaryotic communities in microbial fuel cells

The external resistance (R(ext)) of microbial fuel cells (MFCs) regulates both the anode availability as an electron acceptor and the electron flux through the circuit. We evaluated the effects of R(ext) on MFCs using acetate or glucose. The average current densities (I) ranged from 40.5 mA/m(2) (9,800 Ω) to 284.5 mA/m(2) (150 Ω) for acetate-fed MFCs (acetate-fed reactors [ARs]), with a corresponding anode potential (E(an)) range of -188 to -4 mV (versus a standard hydrogen electrode [SHE]). For glucose-fed MFCs (glucose-fed reactors [GRs]), I ranged from 40.0 mA/m(2) (9,800 Ω) to 273.0 mA/m(2) (150 Ω), with a corresponding E(an) range of -189 to -7 mV. ARs produced higher Coulombic efficiencies and energy efficiencies than GRs over all tested R(ext) levels because of electron and potential losses from glucose fermentation. Biogas production accounted for 14 to 18% of electron flux in GRs but only 0 to 6% of that in ARs. GRs produced similar levels of methane, regardless of the R(ext). However, total methane production in ARs increased as R(ext) increased, suggesting that E(an) might influence the competition for substrates between exoelectrogens and methanogens in ARs. An increase of R(ext) to 9,800 Ω significantly changed the anode bacterial communities for both ARs and GRs, while operating at 970 Ω and 150 Ω had little effect. Deltaproteobacteria and Bacteroidetes were the major groups found in anode communities in ARs and GRs. Betaproteobacteria and Gammaproteobacteria were found only in ARs. Bacilli were abundant only in GRs. The anode-methanogenic communities were dominated by Methanosaetaceae, with significantly lower numbers of Methanomicrobiales. These results show that R(ext) affects not only the E(an) and current generation but also the anode biofilm community and methanogenesis.     

Evaluation of biocathodes in freshwater and brackish sediment microbial fuel cells

Biofilms on biocathodes can catalyze the cathodic oxygen reduction and accordingly guarantee high cathode redox potentials. The present research assessed the use of biocathodes in full-sediment microbial fuel cells. Carbon felt-based biocathodes were evaluated in freshwater systems, and an extension of their application to brackish systems and/or stainless steel webs as base material was considered. Efficient biocathodes could be developed within days through inoculation with active microorganisms. Carbon felt was found most suited for the biocathodes in freshwater with increased performance at salinities around 80–250 mM. Maximum long-term performance reached 12.3 μW cm⁻² cathode. The relative benefit of stainless steel seemed to increase with increasing salinity. A combination of stainless steel cathodes with biofilms could, however, also result in decreased electrical performance. In an efficiently catalyzing cathodic biofilm, an enrichment with an uncultured Proteobacterium—previously correlated with steel waste—was observed.     

A state of the art review on microbial fuel cells: A promising technology for wastewater treatment and bioenergy

A microbial fuel cell (MFC) is a bioreactor that converts chemical energy in the chemical bonds in organic compounds to electrical energy through catalytic reactions of microorganisms under anaerobic conditions. It has been known for many years that it is possible to generate electricity directly by using bacteria to break down organic substrates. The recent energy crisis has reinvigorated interests in MFCs among academic researchers as a way to generate electric power or hydrogen from biomass without a net carbon emission into the ecosystem. MFCs can also be used in wastewater treatment facilities to break down organic matters. They have also been studied for applications as biosensors such as sensors for biological oxygen demand monitoring. Power output and Coulombic efficiency are significantly affected by the types of microbe in the anodic chamber of an MFC, configuration of the MFC and operating conditions. Currently, real-world applications of MFCs are limited because of their low power density level of several thousand mW/m2. Efforts are being made to improve the performance and reduce the construction and operating costs of MFCs. This article presents a critical review on the recent advances in MFC research with emphases on MFC configurations and performances.     

Performance and microbial ecology of air-cathode microbial fuel cells with layered electrode assemblies

Microbial fuel cells (MFCs) can be built with layered electrode assemblies, where the anode, proton exchange membrane (PEM), and cathode are pressed into a single unit. We studied the performance and microbial community structure of MFCs with layered assemblies, addressing the effect of materials and oxygen crossover on the community structure. Four MFCs with layered assemblies were constructed using Nafion or Ultrex PEMs and a plain carbon cloth electrode or a cathode with an oxygen-resistant polytetrafluoroethylene diffusion layer. The MFC with Nafion PEM and cathode diffusion layer achieved the highest power density, 381 mW/m² (20 W/m³). The rates of oxygen diffusion from cathode to anode were three times higher in the MFCs with plain cathodes compared to those with diffusion-layer cathodes. Microsensor studies revealed little accumulation of oxygen within the anode cloth. However, the abundance of bacteria known to use oxygen as an electron acceptor, but not known to have exoelectrogenic activity, was greater in MFCs with plain cathodes. The MFCs with diffusion-layer cathodes had high abundance of exoelectrogenic bacteria within the genus Geobacter. This work suggests that cathode materials can significantly influence oxygen crossover and the relative abundance of exoelectrogenic bacteria on the anode, while PEM materials have little influence on anode community structure. Our results show that oxygen crossover can significantly decrease the performance of air-cathode MFCs with layered assemblies, and therefore limiting crossover may be of particular importance for these types of MFCs.     

Mass‐flowering crops dilute pollinator abundance in agricultural landscapes across Europe

Mass‐flowering crops (MFCs) are increasingly cultivated and might influence pollinator communities in MFC fields and nearby semi‐natural habitats (SNHs). Across six European regions and 2 years, we assessed how landscape‐scale cover of MFCs affected pollinator densities in 408 MFC fields and adjacent SNHs. In MFC fields, densities of bumblebees, solitary bees, managed honeybees and hoverflies were negatively related to the cover of MFCs in the landscape. In SNHs, densities of bumblebees declined with increasing cover of MFCs but densities of honeybees increased. The densities of all pollinators were generally unrelated to the cover of SNHs in the landscape. Although MFC fields apparently attracted pollinators from SNHs, in landscapes with large areas of MFCs they became diluted. The resulting lower densities might negatively affect yields of pollinator‐dependent crops and the reproductive success of wild plants. An expansion of MFCs needs to be accompanied by pollinator‐supporting practices in agricultural landscapes.     

Fetal microchimerism in kidney biopsies of lupus nephritis patients may be associated with a beneficial effect

IntroductionMicrochimeric male fetal cells (MFCs) have been associated with systemic lupus erythematosus, and published studies have further correlated MFC with lupus nephritis (LN). In the present study, we evaluated the frequency of MFC in the renal tissue of patients with LN.MethodsTwenty-seven renal biopsies were evaluated: Fourteen were from women with clinical and laboratory findings of LN, and thirteen were from controls. Genomic DNA was extracted from kidney biopsies, and the male fetal DNA was quantified using real-time quantitative polymerase chain reactions for the detection of specific Y chromosome sequences.ResultsMFCs were detected in 9 (64%) of 14 of patients with LN, whereas no MFCs were found in the control group (P = 0.0006). No differences in pregnancy history were found between patients with LN and the control group. Significantly higher amounts of MFCs were found in patients with LN with serum creatinine ≤1.5 mg/dl. Furthermore, women with MFCs had significantly better renal function at the time of biopsy (P = 0.03). In contrast, patients with LN without MFCs presented with more severe forms of glomerulonephritis (World Health Organization class IV = 60% and class V = 40%).ConclusionsOur data indicate a high prevalence of MFCs in renal biopsy specimens from women with LN, suggesting a role for MFCs in the etiology of LN. The present report also provides some evidence that MFCs could have a beneficial effect in this disease.

Electronic supplementary material

The online version of this article (doi:10.1186/s13075-015-0615-4) contains supplementary material, which is available to authorized users.     

Oscillatory tension differentially modulates matrix metabolism and cytoskeletal organization in chondrocytes and fibrochondrocytes

Several modes of mechanical stimulation, including compression, shear, and hydrostatic pressure, have been shown to modulate chondrocyte matrix synthesis, but the effects of mechanical tension have not been widely explored. Since articular cartilage is primarily loaded in compression, tension is not generally viewed as a major contributor to the stress state of healthy tissue. However, injury or attempted repair may cause tension to become more significant. Additionally, fibrocartilaginous tissues experience significant tensile stresses in their normal mechanical environment. In this study we investigated mechanical tension as a means to modulate matrix synthesis and cytoskeletal organization in bovine articular chondrocytes and meniscal fibrochondrocytes (MFCs) in a three-dimensional fibrin construct culture system. Oscillatory tension was applied to constructs at 1.0 Hz and 0–10% displacement variation using a custom device. For nearly all conditions and both cell types, oscillatory tension inhibited matrix synthesis as indicated by ³H-proline and ³⁵S-sulfate incorporation. Additionally, oscillatory tension significantly increased proliferation by chondrocytes but not MFCs. Confocal imaging revealed that all cells initially displayed a rounded morphology, but over time MFCs spontaneously developed a three-dimensional, stellate morphology with numerous projections containing organized cytoskeletal filaments. Interestingly, while unloaded chondrocytes remained rounded, chondrocytes subjected to oscillatory tension developed a similar stellate morphology. Both the biochemical and morphological results of this study have important implications for successfully developing cartilage and fibrocartilage tissue replacements and repair strategies.     

Enrichment of microbial electrolysis cell biocathodes from sediment microbial fuel cell bioanodes

Electron-accepting (electrotrophic) biocathodes were produced by first enriching graphite fiber brush electrodes as the anodes in sediment-type microbial fuel cells (sMFCs) using two different marine sediments and then electrically inverting the anodes to function as cathodes in two-chamber bioelectrochemical systems (BESs). Electron consumption occurred at set potentials of -439 mV and -539 mV (versus the potential of a standard hydrogen electrode) but not at -339 mV in minimal media lacking organic sources of energy. Results at these different potentials were consistent with separate linear sweep voltammetry (LSV) scans that indicated enhanced activity (current consumption) below only ca. -400 mV. MFC bioanodes not originally acclimated at a set potential produced electron-accepting (electrotrophic) biocathodes, but bioanodes operated at a set potential (+11 mV) did not. CO(2) was removed from cathode headspace, indicating that the electrotrophic biocathodes were autotrophic. Hydrogen gas generation, followed by loss of hydrogen gas and methane production in one sample, suggested hydrogenotrophic methanogenesis. There was abundant microbial growth in the biocathode chamber, as evidenced by an increase in turbidity and the presence of microorganisms on the cathode surface. Clone library analysis of 16S rRNA genes indicated prominent sequences most similar to those of Eubacterium limosum (Butyribacterium methylotrophicum), Desulfovibrio sp. A2, Rhodococcus opacus, and Gemmata obscuriglobus. Transfer of the suspension to sterile cathodes made of graphite plates, carbon rods, or carbon brushes in new BESs resulted in enhanced current after 4 days, demonstrating growth by these microbial communities on a variety of cathode substrates. This report provides a simple and effective method for enriching autotrophic electrotrophs by the use of sMFCs without the need for set potentials, followed by the use of potentials more negative than -400 mV.     

Biocathode microbial fuel cell for efficient electricity recovery from dairy manure

Microbial fuel cells (MFCs) represent a new biological method for generating electricity directly from biodegradable compounds. Efficiency of MFCs using manure as substrate is generally low. This study proposed a new design by incorporating biocathodes into a three-chamber MFC, which yielded maximum power densities much higher than those reported in literature. The new design placed cylindrical anode chamber for easy stirring and two symmetrical cathodic chambers with reduced anode-cathode distance. The biocathodes were applied to reduce charge transfer resistance. Additionally, biocathode microbial community was cultured to enrich favorable microorganisms. With external loading of 100 Ω, the power densities for new biocathode MFC using 2, 4, 6, 8 and 10% total solids diary manure reached 7.85±1.0 W m(-3), 7.84±1.20 W m(-3), 8.15±0.20 W m(-3), 7.60±0.97 W m(-3) and 5.63±0.97 W m(-3), respectively. The pH drop as a result of manure hydrolysis limited the power output. To provide detailed information of the microbial community in the biocathode MFC, the 454-pyrosequencing technique was adopted. The Firmicutes, γ-, β-, α- and δ-Proteobacteria, Bacteroidetes and Actinobacteria were the major groups on the anode, while γ-, β-, and α-Proteobacteria, Bacteroidetes and Actinobacteria were the predominant groups on the cathode.     

Range, population abundance and conservation

Several patterns in the distribution and abundance of organisms have now been documented. They include broad (but not universal) positive correlations between range sizes and population abundances; a decline in the proportion of sites occupied and in average population densities from the centre to the edge of a species' range, with either unimodal or multimodal peaks of abundance and occupancy in the core of the range; and intriguing, but still poorly documented phylogenetic effects on both range size and abundance. All these patterns require further work to establish their generality, and all of them lack generally agreed explanations. They are important, however, not only theoretically but also practically, because of the constraints and opportunities they appear to provide for the management and conservation of species.     

Effects of microbial species,organic loading and substrate degradation rate on the power generation capability of microbial fuel cells

Four microbial fuel cells (MFCs) inoculated with different bacterial species were constructed. The species were Pseudomonas putida, Comamonas testosteroni, Corynebacterium gultamicum, and Arthrobacter polychromogenes. The MFCs were operated under identical continuous flow conditions. The factors affecting the capabilities of the MFCs for treating organic matter and generating power were evaluated and compared. The factors include microbial species type, organic loading, and substrate degradation rate. For all four MFCs, power output increased with the organic loading rate. Power density also increased with the substrate degradation rate. These findings implied that more organic matter was utilized for power generation at higher organic loading and substrate degradation rates. However, coulombic efficiency increased with decreased organic loading and substrate degradation rates. Apparently, all four MFCs had low efficiencies in generating power from organic matter. These low efficiencies are attributed to the long distance between the anode and the cathode, as well as to the small ratio of the proton exchange membrane surface area to the anode chamber surface area. These features may have caused most of the protons produced in the anode chamber to leave the chamber with the effluent, which led to the low power generation performance of the MFCs.