Formation of new polyhydroxyalkanoate containing 3-hydroxy-4-methylvalerate monomer in Burkholderia sp

Burkholderia sp. synthase has been shown to polymerize 3-hydroxybutyrate (3HB), 3-hydroxyvalerate, and 3-hydroxy-4-pentenoic acid monomers. This study was carried out to evaluate the ability of Burkholderia sp. USM (JCM 15050) and its transformant harboring the polyhydroxyalkanoate (PHA) synthase gene of Aeromonas caviae to incorporate the newly reported 3-hydroxy-4-methylvalerate (3H4MV) monomer. Various culture parameters such as concentrations of nutrient rich medium, fructose and 4-methylvaleric acid as well as harvesting time were manipulated to produce P(3HB-co-3H4MV) with different 3H4MV compositions. The structural properties of PHA containing 3H4MV monomer were investigated by using nuclear magnetic resonance and Fourier transform infrared spectroscopy (FTIR). The relative intensities of the bands at 1,183 and 1,228 cm⁻¹ in the FTIR spectra enabled the rapid detection and differentiation of P(3HB-co-3H4MV) from other types of PHA. In addition, the presence of 3H4MV units in the copolymer was found to considerably lower the melting temperature and enthalpy of fusion values compared with poly(3-hydroxybutyrate) (P(3HB)). The copolymer exhibited higher thermo-degradation temperature but similar molecular weight and polydispersity compared with P(3HB).     

Production of copolymer poly(3-hydroxybutyrate-<Emphasis Type="Italic">co</Emphasis>-4-hydroxybutyrate) through a one-step cultivation process

A one-step cultivation process for the production of biodegradable polymer poly(3-hydroxybutyrate-co-4-hydroxybutyrate) [P(3HB-co-4HB)] by Cupriavidus sp. USMAA2-4 was carried out using various carbon sources. It was found that Cupriavidus sp. USMAA2-4 could produce approximately 44 wt.% copolymer of P(3HB-co-4HB) with 27 mol% 4HB composition when the combination of oleic acid and 1,4-butanediol are used as carbon sources in 60 h cultivation. The manipulation of carbon-to-nitrogen ratio (C/N) resulted in the increase of dry cell weight, PHA content as well as 4HB composition. A new strategy of introducing oleic acid and 1,4-butanediol together and separately at different concentration demonstrated different yield in PHA content ranging from 47 to 58 wt.%. The molecular weight obtained was 234 kDa (by adding 1,4-butanediol and oleic acid together) and 212 kDa (by adding 1,4-butanediol separately). The copolymer of P(3HB-co-4HB) produced by Cupriavidus sp. USMAA2-4 was detected statistically as a random copolymer when analysed by nuclear magnetic resonance (NMR) spectroscopy.     

Improved production of poly(3-hydroxybutyrate-co-4-hydroxbutyrate) copolymer using a combination of 1,4-butanediol and γ-butyrolactone

A locally isolated Gram-negative bacterium, Cupriavidus sp. USMAA2-4 was able to synthesize poly(3-hydroxybutyrate-co-4-hydroxybutyrate) [P(3HB-co-4HB)] when fed with the precursor carbon 1,4-butanediol using a two-stage cultivation process. When 1% (w/v) of 1,4-butanediol was used, 31 wt.% of P(3HB-co-4HB) copolymer with 41 mol.% of 4HB molar fraction was produced. Both the PHA content and 4HB composition of the copolymer increased as the concentration of 1,4-butanediol increased but the cell biomass did not show any significant changes. However, the 4HB fraction could be further increased using a combination of γ-butyrolactone and 1,4-butanediol. As high as 84 mol.% of 4HB composition was achieved with a combination of 0.35% (w/v) 1,4-butanediol and 1.4% (w/v) γ-butyrolactone. Nevertheless, it was found that Cupriavidus sp. USMAA2-4 cells were inhibited by high concentration of γ-butyrolactone. P(3HB-co-4HB) copolymer was also successfully synthesized using a simplified aerated tank.     

En route to economical eco‐friendly solvent system in enhancing sustainable recovery of poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) copolymer

Separation of poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) [P(3HB‐co‐4HB)] from bacterial cell matter is a critical step in the downstream process with respect to material quality and eco‐balance as P(3HB‐co‐4HB) is widely used for biomedical applications. Therefore, an efficient and eco‐based extraction of P(3HB‐co‐4HB) using a combination of NaOH and Lysol in digesting the non‐polymeric cell material (NPCM) digestion is developed. The NaOH and Lysol show synergistic influence on the copolymer extraction at a high purity and recovery of 97 and 98 wt% respectively. The optimized cell digestion method was found applicable to a vast batch of cells containing copolymers from various 4HB monomer compositions. At the largest extraction volume of 100 L, P(3HB‐co‐4HB) with a purity of 89 wt% was extracted with a maximum recovery of 90 wt%. The method developed has also eliminated the cell pretreatment step. The extraction method developed in this research has not only produced an economic and efficient copolymer recovery but has also retained the copolymer quality, in term of its molecular weight and thermal properties. It demonstrates a practical and promising downstream processing method in recovering the copolymer effectively from the bacterial biomass.     

Biosynthesis of Poly(3-hydroxybutyrate-<Emphasis Type="Italic">co</Emphasis>-3-hydroxyvalerate-<Emphasis Type="Italic">co</Emphasis>-4-hydroxybutyrate) terpolymer by <Emphasis Type="Italic">Cupriavidus</Emphasis> sp. USMAA2-4 through two-step cultivation process

A locally isolated Gram-negative bacterium, Cupriavidus sp. USMAA2-4 was found capable of producing terpolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate-co-4-hydroxybutyrate) [P(3HB-co-3HV-co-4HB)] using γ-butyrolactone or 1,4-butanediol with either valeric acid or 1-pentanol as the carbon source. The present of 3HB, 3HV and 4HB monomers were confirmed by gas chromatography (GC) and nuclear magnetic resonance (NMR) analysis. PHA concentration of 1.9 g/l was the highest value obtained using the combination of 1,4-butanediol and 1-pentanol through one-step cultivation process. PHA concentration obtained through two-step cultivation process was higher for all the combinations and the highest value achieved was 2.5 g/l using γ-butyrolactone and 1-pentanol as carbon source. Various molar fractions of 4HB and 3HV ranging from 6 to 14 mol% and 39 to 87 mol%, respectively were produced through two-step cultivation process by manipulating the concentration of γ-butyrolactone. As the culture aeration was reduced, the molar fraction of 3HV and 4HB increased from 40 to 67 mol% and 10 to 24 mol%, respectively while the dry cell weight and PHA content decreased. The terpolymer produced was characterized using gel permeation chromatography (GPC) and differential scanning calorimetry (DSC). The number-average molecular weight (M _n) and the melting temperature (T _m)) of the terpolymer were in the range of 177–484 kDa and 160–164°C, respectively.     

Characterization of Site-Specific Mutations in a Short-Chain-Length/Medium-Chain-Length Polyhydroxyalkanoate Synthase: In Vivo and In Vitro Studies of Enzymatic Activity and Substrate Specificity

Saturation point mutagenesis was carried out at position 479 in the polyhydroxyalkanoate (PHA) synthase from Chromobacterium sp. strain USM2 (PhaC_Cs) with specificities for short-chain-length (SCL) [(R)-3-hydroxybutyrate (3HB) and (R)-3-hydroxyvalerate (3HV)] and medium-chain-length (MCL) [(R)-3-hydroxyhexanoate (3HHx)] monomers in an effort to enhance the specificity of the enzyme for 3HHx. A maximum 4-fold increase in 3HHx incorporation and a 1.6-fold increase in PHA biosynthesis, more than the wild-type synthase, was achieved using selected mutant synthases. These increases were subsequently correlated with improved synthase activity and increased preference of PhaC_Cs for 3HHx monomers. We found that substitutions with uncharged residues were beneficial, as they resulted in enhanced PHA production and/or 3HHx incorporation. Further analysis led to postulations that the size and geometry of the substrate-binding pocket are determinants of PHA accumulation, 3HHx fraction, and chain length specificity. In vitro activities for polymerization of 3HV and 3HHx monomers were consistent with in vivo substrate specificities. Ultimately, the preference shown by wild-type and mutant synthases for either SCL (C₄ and C₅) or MCL (C₆) substrates substantiates the fundamental classification of PHA synthases.     

Heterologous expression of <Emphasis Type="Italic">Cupriavidus</Emphasis> sp. USMAA2-4 PHA synthase gene in PHB<Superscript>−</Superscript>4 mutant for the production of poly(3-hydroxybutyrate) and its copolymers

Ecological deterioration and human health concerns arising from the usage of non-biodegradable plastics have prompted mankind to search for greener alternatives which are biodegradable, biocompatible and easily produced from renewable sources. Polyhydroxyalkanoates (PHA), among other biopolymers, are emerging as a viable replacement for fossil fuel-based synthetic plastics. A PHA-producing strain, identified as Cupriavidus sp. (designated Cupriavidus sp. USMAA2-4) was isolated from a soil sample from western peninsular Malaysia. Heterologous expression of the PHA synthase gene (phaC _USMAA2-4) in mutant C. necator PHB⁻4 complemented its PHA-producing ability. More than 60 wt% of P(3HB) was synthesized from various plant oils. The highest P(3HB) production of 2.38 g/l at 68 wt% was attained when crude palm kernel oil was fed as the sole carbon source. The 3HV molar fraction in poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [P(3HB-co-3HV)] was significantly affected by the type of the precursor used and their respective feeding time. The 3HV molar fraction ranged from 4 to 31 mol% when sodium propionate/valerate was fed at different cultivation times. In addition, with the supplementation of 4HB-monomer precursors, approximately 67 wt% P(3HB-co-4HB) with 4–5 mol% of 4-hydroxybutyrate monomer was synthesized, regardless of the precursor feeding time used. Variation in the molar fraction of the second monomer along with its biodegradability and biocompatibility characteristics promotes the potential of these copolymers as replacements for traditional commodity plastics.     

Biosynthesis of poly(3-hydroxybutyrate-co-3-hydroxyalkanoates) by recombinant bacteria expressing the PHA synthase gene phaC1 from Pseudomonas sp. 61-3

Pseudomonas sp. 61-3 accumulated a blend of poly(3-hydroxybutyrate) [P(3HB)] homopolymer and a random copolymer consisting of 3-hydroxyalkanoate (3HA) units of 4–12 carbon atoms. The genes encoding β-ketothiolase (PhbA_Re) and NADPH-dependent acetoacetyl-CoA reductase (PhbB_Re) from Ralstoniaeutropha were expressed under the control of promoters for Pseudomonas sp. 61-3 pha locus or R. eutropha phb operon together with phaC1 _Ps gene (PHA synthase 1 gene) from Pseudomonas sp. 61-3 in PHA-negative mutants P. putida GPp104 and R. eutropha PHB⁻4 to produce copolyesters [P(3HB-co-3HA)] consisting of 3HB and medium-chain-length 3HA units of 6–12 carbon atoms. The introduction of the three genes into GPp104 strain conferred the ability to synthesize P(3HB-co-3HA) with relatively high 3HB compositions (up to 49 mol%) from gluconate and alkanoates, although 3HB units were not incorporated at all or at a very low fraction (3 mol%) into copolyesters by the strain carrying phaC1 _Ps gene only. In addition, recombinant strains of R. eutropha PHB⁻4 produced P(3HB-co-3HA) with higher 3HB fractions from alkanoates and plant oils than those from recombinant GPp104 strains. One of the recombinant strains, R. eutropha PHB⁻4/pJKSc46-pha, in which all the genes introduced were expressed under the control of the native promoter for Pseudomonas sp. 61-3 pha locus, accumulated P(3HB-co-3HA) copolyester with a very high 3HB fraction (85 mol%) from palm oil. The nuclear magnetic resonance analyses showed that the copolyesters obtained here were random copolymers of 3HB and 3HA units. Received: 12 July 1999 / Received revision: 1 October 1999 / Accepted: 2 October 1999     

Regulating the molar fraction of 4-hydroxybutyrate in Poly(3-hydroxybutyrate-co-4-hydroxybutyrate) by biological fermentation and enzymatic degradation

The regulation of 4-hydroxybutyrate (4HB) molar fraction in the poly(3-hydroxybutyrate-co-4-hydroxybutyrate) [P(3HB-co-4HB)] of a local isolate Cupriavidus sp. USMAA1020 was attempted by employing a feeding strategy through fed-batch fermentation in 100-L fermenter. The growth of Cupriavidus sp. USMAA1020 was enhanced by frequently feeding carbon and nitrogen at a ratio of 5 (C/N 5) using a DO-stat with cascade mode at 20% (v/v) dissolved oxygen (DO). The feeding of C/N 5 and the use of the DO-stat mode were able to regulate the 4HB composition from 0–67 mol% by sequential feeding of γ-butyrolactone and supplementing oleic acid. A high 4HB molar fraction of 67 mol% with a PHA concentration of 5.2 g/L was successfully obtained by employing this feeding strategy. Notably, enzymatic degradation carried out enhanced the 4HB composition of the copolymer synthesized. PHB depolymerase enzyme from Acidovorax sp. was used to degrade this P(3HB-co-70-mol%4HB) copolymer and the 4HB composition could be increased up to 83 mol%. The degradation process was observed by monitoring the time-dependent change in the weight loss of copolymer films. The percentage of weight loss of solvent-cast film increased proportionally up to 19% within 3 h, whereas salt-leached films showed 90% of weight loss within 3 h of incubation and were completely degraded by 4 h. The molecular weight (M _n ) of the films treated with enzyme demonstrated a slight decrease. SEM observation exhibited a rough surface morphology of the copolymer degraded with depolymerase enzyme.     

Biosynthesis of polylactic acid and its copolymers using evolved propionate CoA transferase and PHA synthase

For the synthesis of polylactic acid (PLA) and its copolymers by one‐step fermentation process, heterologous pathways involving Clostridium propionicum propionate CoA transferase (Pct_Cp) and Pseudomonas sp. MBEL 6‐19 polyhydroxyalkanoate (PHA) synthase 1 (PhaC1_Ps6‐19) were introduced into Escherichia coli for the generation of lactyl‐CoA endogenously and incorporation of lactyl‐CoA into the polymer, respectively. Since the wild‐type PhaC1_Ps6‐19 did not efficiently accept lactyl‐CoA as a substrate, site directed mutagenesis as well as saturation mutagenesis were performed to improve the enzyme. The wild‐type Pct_Cp was not able to efficiently convert lactate to lactyl‐CoA and was found to exert inhibitory effect on cell growth, random mutagenesis by error‐prone PCR was carried out. By employing engineered PhaC1_Ps6‐19 and Pct_Cp, poly(3‐hydroxybutyrate‐co‐lactate), P(3HB‐co‐LA), containing 20–49 mol% lactate could be produced up to 62 wt% from glucose and 3HB. By controlling the 3HB concentration in the medium, PLA homopolymer and P(3HB‐co‐LA) containing lactate as a major monomer unit could be synthesized. Also, P(3HB‐co‐LA) copolymers containing various lactate fractions could be produced from glucose alone by introducing the Cupriavidus necator β‐ketothiolase and acetoacetyl‐CoA reductase genes. Fed‐batch cultures were performed to produce P(3HB‐co‐LA) copolymers having 9–64 mol% of lactate, and their molecular weights, thermal properties, and melt flow properties were determined. Biotechnol. Bioeng. 2010; 105: 150–160. © 2009 Wiley Periodicals, Inc.     

Isolation of poly(3-hydroxybutyrate-<Emphasis Type="Italic">co</Emphasis>-4-hydroxybutyrate) producer from Malaysian environment using γ-butyrolactone as carbon source

Samples from various natural environments in Peninsular Malaysia were screened for microorganisms that are capable of producing poly(3-hydroxybutyrate-co-4-hydroxybutyrate). A total of 663 isolates were isolated and 119 out of these isolates were identified as possible PHA producers based on Nile red staining methods. All these potential producers emitted pink fluorescence when grown on solid mineral salts medium (MSM) containing Nile red and exposed to UV light. The isolates obtained in this study were cultivated in MSM containing γ-butyrolactone as the carbon source. Gas chromatography (GC) analysis confirmed that 95 out of the 119 isolates were PHA producers. Among the 95 positive isolates, 77 isolates produced only P(3HB) homopolymer and 18 isolates produced PHA containing 3-hydroxybutyrate (3HB) and 4-hydroxybutyrate (4HB) monomers. Of these 18 isolates, USMAA1020 was screened as the best P(3HB-co-4HB) producer based on GC analysis. For further confirmation, PHA was extracted from the isolate and analyzed by GC as well as nuclear magnetic resonance (NMR). Results from both analyses confirmed that this isolate was capable of producing PHA containing 3HB and 4HB. Based on, biochemical characterization, 16S rRNA sequencing, DNA base composition, cellular fatty acids analysis and DNA–DNA hybridization, it is clearly indicated that this isolate belongs to the genus Cupriavidus. Poly(3HB-co-4HB) was synthesized by this bacterium in one-stage, two-stage and three-stage cultivation using γ-butyrolactone as the carbon source. The highest 4HB composition of 82 mol% was obtained through three-stage cultivation.     

Expression of Aeromonas caviae polyhydroxyalkanoate synthase gene in Burkholderia sp. USM (JCM15050) enables the biosynthesis of SCL-MCL PHA from palm oil products

AIMS: Burkholderia sp. USM (JCM15050) isolated from oil-polluted wastewater is capable of utilizing palm oil products and glycerol to synthesize poly(3-hydroxybutyrate) [P(3HB)]. To confer the ability to produce polymer containing 3-hydroxyhexanoate (3HHx), plasmid (pBBREE32d13) harbouring the polyhydroxyalkanoate (PHA) synthase gene of Aeromonas caviae (phaC(Ac)) was transformed into this strain. Methods and Results: The resulting transformant incorporated approximately 1 ± 0·3 mol% of 3HHx in the polymer when crude palm kernel oil (CPKO) or palm kernel acid oil was used as the sole carbon source. In addition, when the transformed strain was cultivated in the mixtures of CPKO and sodium valerate, PHA containing 69 mol% 3HB, 30 mol% 3-hydroxyvalerate and 1 mol% 3HHx monomers was produced. Batch feeding of carbon sources with 0·5% (v/v) CPKO at 0 h and 0·25% (w/v) sodium valerate at 36 h yielded 6 mol% of 3HHx monomer by controlled-feeding strategies. CONCLUSIONS: Burkholderia sp. USM (JCM15050) has the metabolic pathways to supply both the short-chain length (SCL) and medium-chain length (MCL) PHA monomers. By transforming the strain with the Aer. caviae PHA synthase with broader substrate specificity, SCL-MCL PHA was produced. Significance and Impact of the Study: This is the first study demonstrating the ability of transformant Burkholderia to produce P(3HB-co-3HHx) from a single carbon source.     

Metabolic engineering of Escherichia coli for the production of polylactic acid and its copolymers

Polylactic acid (PLA) is a promising biomass‐derived polymer, but is currently synthesized by a two‐step process: fermentative production of lactic acid followed by chemical polymerization. Here we report production of PLA homopolymer and its copolymer, poly(3‐hydroxybutyrate‐co‐lactate), P(3HB‐co‐LA), by direct fermentation of metabolically engineered Escherichia coli. As shown in an accompanying paper, introduction of the heterologous metabolic pathways involving engineered propionate CoA‐transferase and polyhydroxyalkanoate (PHA) synthase for the efficient generation of lactyl‐CoA and incorporation of lactyl‐CoA into the polymer, respectively, allowed synthesis of PLA and P(3HB‐co‐LA) in E. coli, but at relatively low efficiency. In this study, the metabolic pathways of E. coli were further engineered by knocking out the ackA, ppc, and adhE genes and by replacing the promoters of the ldhA and acs genes with the trc promoter based on in silico genome‐scale metabolic flux analysis in addition to rational approach. Using this engineered strain, PLA homopolymer could be produced up to 11 wt% from glucose. Also, P(3HB‐co‐LA) copolymers containing 55–86 mol% lactate could be produced up to 56 wt% from glucose and 3HB. P(3HB‐co‐LA) copolymers containing up to 70 mol% lactate could be produced to 46 wt% from glucose alone by introducing the Cupriavidus necator β‐ketothiolase and acetoacetyl‐CoA reductase genes. Thus, the strategy of combined metabolic engineering and enzyme engineering allowed efficient bio‐based one‐step production of PLA and its copolymers. This strategy should be generally useful for developing other engineered organisms capable of producing various unnatural polymers by direct fermentation from renewable resources. Biotechnol. Bioeng. 2010; 105: 161–171. © 2009 Wiley Periodicals, Inc.     

Synthesis of poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate)/chitosan/silver nanocomposite material with enhanced antimicrobial activity

This work aims to shed light in the fabrication of poly(3‐hydroxybutyrate‐co‐44%‐4‐hydroxybutyrate)[P(3HB‐co‐44%4HB)]/chitosan‐based silver nanocomposite material using different contents of silver nanoparticle (SNP); 1–9 wt%. Two approaches were applied in the fabrication; namely solvent casting and chemical crosslinking via glutaraldehyde (GA). A detailed characterization was conducted in order to yield information regarding the nanocomposite material. X‐ray diffraction analysis exhibited the nature of the three components that exist in the nanocomposite films: P(3HB‐co‐4HB), chitosan, and SNP. In term of mechanical properties, tensile strength, and elongation at break were significantly improved up to 125% and 22%, respectively with the impregnation of the SNP. The melting temperature of the nanocomposite materials was increased whereas their thermal stability was slightly changed. Scanning electron microscopy images revealed that incorporation of 9 wt% of SNP caused agglomeration but the surface roughness of the material was significantly improved with the loading. Staphylococcus aureus and Escherichia coli were completely inhibited by the nanocomposite films with 7 and 9 wt% of SNP, respectively. On the other hand, degradation of the nanocomposite materials outweighed the degradation of the pure copolymer. These bioactive and biodegradable materials stand a good chance to serve the vast need of biomedical applications namely management and care of wound as wound dressing. © 2014 American Institute of Chemical Engineers Biotechnol. Prog., 30:1469–1479, 2014     

Sequence analysis and structure prediction of type II Pseudomonas sp. USM 4–55 PHA synthase and an insight into its catalytic mechanism

Background  

Polyhydroxyalkanoates (PHA), are biodegradable polyesters derived from many microorganisms such as the pseudomonads. These polyesters are in great demand especially in the packaging industries, the medical line as well as the paint industries. The enzyme responsible in catalyzing the formation of PHA is PHA synthase. Due to the limited structural information, its functional properties including catalysis are lacking. Therefore, this study seeks to investigate the structural properties as well as its catalytic mechanism by predicting the three-dimensional (3D) model of the Type II Pseudomonas sp. USM 4–55 PHA synthase 1 (PhaC1_{P.sp USM 4–55}).     

Enhanced production of poly(3-hydroxybutyrate-<Emphasis Type="Italic">co</Emphasis>-4-hydroxybutyrate) copolymer with manipulated variables and its properties

Cupriavidus sp. USMAA1020, a local isolate was able to biosynthesis poly(3-hydroxybutyrate-co-4-hydroxybutyrate) [P(3HB-co-4HB)] copolymer with various 4HB precursors as the sole carbon source. Manipulation of the culture conditions such as cell concentration, phosphate ratio and culture aeration significantly affected the synthesis of P(3HB-co-4HB) copolymer and 4HB composition. P(3HB-co-4HB) copolymer with 4HB compositions ranging from 23 to 75 mol% 4HB with various mechanical and thermal properties were successfully produced by varying the medium aeration. The physical and mechanical properties of P(3HB-co-4HB) copolymers were characterized by NMR spectroscopy, gel-permeation chromatography, tensile test, and differential scanning calorimetry. The number-average molecular weights (M _n) of copolymers ranged from 260 × 10³ to 590 × 10³Da, and the polydispersities (M _w/M _n) were between 1.8 and 3.0. Increases in the 4HB composition lowered the molecular weight of these copolymers. In addition, the increase in 4HB composition affected the randomness of copolymer, melting temperature (T _m), glass transition temperature (T _g), tensile strength, and elongation to break. Enzymatic degradation of P(3HB-co-4HB) films with an extracellular depolymerase from Ochrobactrum sp. DP5 showed that the degradation rate increased proportionally with time as the 4HB fraction increased from 17 to 50 mol% but were much lower with higher 4HB fraction. Degradation of P(3HB-co-4HB) films with lipase from Chromobacterium viscosum exhibited highest degradation rate at 75 mol% 4HB. The biocompatibility of P(3HB-co-4HB) copolymers were evaluated and these copolymers have been shown to support the growth and proliferation of fibroblast cells.     

Recovery of poly(3‐hydroxybutyrate‐co‐3‐hydroxyhexanoate) from Ralstonia eutropha cultures with non‐halogenated solvents

Reduced downstream costs, together with high purity recovery of polyhydroxyalkanoate (PHA), will accelerate the commercialization of high quality PHA‐based products. In this work, a process was designed for effective recovery of the copolymer poly(hydroxybutyrate‐co‐hydroxyhexanoate) (P(HB‐co‐HHx)) containing high levels of HHx (>15 mol%) from Ralstonia eutropha biomass using non‐halogenated solvents. Several non‐halogenated solvents (methyl isobutyl ketone, methyl ethyl ketone, and butyl acetate and ethyl acetate) were found to effectively dissolve the polymer. Isoamyl alcohol was found to be not suitable for extraction of polymer. All PHA extractions were performed from both dry and wet cells at volumes ranging from 2 mL to 3 L using a PHA to solvent ratio of 2% (w/v). Ethyl acetate showed both high recovery levels and high product purities (up to 99%) when using dry cells as starting material. Recovery from wet cells, however, eliminates a biomass drying step during the downstream process, potentially saving time and cost. When wet cells were used, methyl isobutyl ketone (MIBK) was shown to be the most favorable solvent for PHA recovery. Purities of up to 99% and total recovery yields of up to 84% from wet cells were reached. During polymer recovery with either MIBK or butyl acetate, fractionation of the extracted PHA occurred, based on the HHx content of the polymer. PHA with higher HHx content (17–30 mol%) remained completely in solution, while polymer with a lower HHx content (11–16 mol%) formed a gel‐like phase. All PHA in solution could be precipitated by addition of threefold volumes of n‐hexane or n‐heptane to unfiltered PHA solutions. Effective recycling of the solvents in this system is predicted due to the large differences in the boiling points between solvent and precipitant. Our findings show that two non‐halogenated solvents are good candidates to replace halogenated solvents like chloroform for recovery of high quality PHA. Biotechnol. Bioeng. 2013; 110: 461–470. © 2012 Wiley Periodicals, Inc.     

Synthesis of biodegradable polyesters by Gram negative bacterium isolated from Malaysian environment

A locally isolated Gram negative bacterium, Cupriavidus sp. USMAA9-39 was able to produce various types of biodegradable polyesters through a two-step cultivation process. These are copolymer poly(3-hydroxybutyrate-co-4-hydroxybutyrate) [P(3HB-co-4HB)], copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [P(3HB-co-3HV)] and terpolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate-co-4-hydroxybutyrate) [P(3HB-co-3HV-co-4HB)]. These polymers were synthesized by this bacterium when grown with a combination of some carbon sources. The biosynthesis of P(3HB-co-4HB) was achieved by using carbon sources such as γ-butyrolactone or 1,4-butanediol or by a combination of oleic acid with either γ-butyrolactone or 1,4-butanediol. Meanwhile, poly(3-hydroxybutyrate-co-3-hydroxyvalerate) was produced using 1-pentanol or valeric acid or by a combination of oleic acid with either 1-pentanol or valeric acid. When γ-butyrolactone or 1,4-butanediol with either valeric acid or 1-pentanol were used as mixed carbon sources, P(3HB-co-3HV-co-4HB) terpolymer were produced. The presence of 3HB, 3HV or/and 4HB monomers were confirmed by gas chromatography and nuclear magnetic resonance (NMR) spectroscopy.     

Identification of 4-hydroxyvaleric acid as a constituent of biosynthetic polyhydroxyalkanoic acids from bacteria

Summary Twenty-four different strains of aerobic Gram-negative bacteria, mainly belonging to the genera Alcaligenes, Paracoccus, Pseudomonas and Methylobacterium, were examined with respect to their ability to utilize 4-hydroxyvaleric acid (4HV), 4-valerolactone (4VL) and 3-hydroxypropionic acid (3HP) as carbon sources for growth and for accumulation of polyhydroxyalkanoic acid (PHA). A gas chromatographic (GC) method for the detection of 3-hydroxyalkanoic acid methyl esters has been extended for the detection of derivatives obtained from the methanolysis of 4-hydroxybutyric acid (4HB) and 4HV. Most of the Alcaligenes species and P. oxalaticus Ox1 accumulated a terpolyester consisting of 3-hydroxybutyric acid (3HB), 3-hydroxyvaleric acid (3HV) and 4HV as constituents from 4HV or 4VL as sole carbon sources in batch, fed-batch or two-stage fed-batch cultures. Poly(3HB-co-3HV-co-4HV) accumulated from 4HV by A. eutrophus strain NCIB 11599 amounted to approximately 50% of the cell dry matter and was composed of 42.0 mol % 3HB, 52.2 mol % 3HV and 5.6 mol % 4HV, respectively. Pseudomonads, which belong to the rRNA homology group I, were not able to incorporate 4HV. With 3HP as carbon source, the GC analysis provided evidence for the presence of 3HP in the PHA of many bacteria. Nuclear magnetic resonance spectroscopic analysis confirmed that, for example, A. eutrophus strain TF93 accumulated poly(3HB-co-3HP) with 98 mol % 3HB and 2 mol % 3HP if the cells were cultivated in the presence of 0.5% (w/v) 3HP. Offprint requests to: A. Steinbüchel     

Structure and properties of poly(3-hydroxybutyrate-co-4-hydroxybutyrate) produced by Alcaligenes latus

Summary Random copolymers of 3-hydroxybutyrate (3HB) and 4-hydroxybutyrate (4HB) with a wide range of compositions varying from 0 to 83 mol% 4HB were produced by Alcaligenes latus from the mixed carbon substrates of 3-hydroxybutyric and 4-hydroxybutyric acids. The structure and physical properties of P(3HB-co-4HB) were characterized by¹H and¹³C NMR spectroscopy, gel-permeation chromatography, and differential scanning calorimetry. The isothermal radial growth rates of spherulites of P(3HB-co-4HB) were much slower than the rate of P(3HB) homopolymer. The enzymatic degradation rates of P(3HB-co-4HB) films by a PHB depolymerase were strongly influenced by the copolymer composition.