Creating random mutagenesis libraries using megaprimer PCR of whole plasmid

The conventional method for cloning a DNA fragment is to insert it into a vector and ligate it. Although this method is commonly used, it is labor intensive because the ratio and concentrations of the DNA insert and the vector need optimizing. Even then, the resultant library is often plagued with unwanted plasmids that have no inserts or multiple inserts. These species have to be eradicated to avoid tedious screening, especially when producing a mutant gene library. To overcome these problems, we modified the QuikChange protocol so that each plasmid carries a single insert. Although the QuikChange was originally developed for site-directed mutagenesis using complementary mutagenic oligonucleotide primers in whole plasmid PCR, we found that the protocol also worked for megaprimers consisting of hundreds of nucleotides. Based on this discovery, we used insert fragments, which we wanted to clone, as the primers in the QuikChange reaction. The resultant libraries were virtually free from species with no inserts or multiple inserts. The present method, which we designated MEGAWHOP (megaprimer PCR of whole plasmid), is thus ideal for creating random mutagenesis megalibraries.     

A rapid and efficient method for multiple-site mutagenesis with a modified overlap extension PCR

A rapid and efficient method to perform site-directed mutagenesis based on an improved version of overlap extension by polymerase chain reaction (OE-PCR) is demonstrated in this paper. For this method, which we name modified (M)OE-PCR, there are five steps: (1) synthesis of individual DNA fragments of interest (with average 20-bp overlap between adjacent fragments) by PCR with high-fidelity pfu DNA polymerase, (2) double-mixing (every two adjacent fragments are mixed to implement OE-PCR without primers), (3) pre-extension (the teams above are mixed to obtain full-length reassembled DNA by OE-PCR without primers), (4) synthesis of the entire DNA of interest by PCR with outermost primers and template DNA from step 3, (5) post-extension (ten cycles of PCR at 72°C for annealing and extension are implemented). The method is rapid, simple and error-free. It provides an efficient choice, especially for multiple-site mutagenesis of DNAs; and it can theoretically be applied to the modification of any DNA fragment. Using the MOE-PCR method, we have successfully obtained a modified sam1 gene with eight rare codons optimized simultaneously. Electronic Supplementary Material Supplementary material is available for this article at .     

Chased PCR: A modified inverse PCR technique to characterize flanking regions of AT-rich DNA fragments

The chased polymerase chain reaction (PCR) technique described here is a convenient method enabling the characterization of flanking regions of a known A/T-rich DNA fragment in two different successive steps. The first step includes a modified inverse PCR with inverted tail-to-tail primers, each with 35 overhanging nucleotides for the insertion into a carrier plasmid. The second step consists of a technique similar to a site-directed mutagenesis. The chased PCR technique is simple, quick, versatile and efficient; it improves the inverse PCR technique and may be applied to any ligation-linker method. Consequently, the techniques for PCR-based gene isolation are more suitable for the isolation of missing sequences of A/T-rich or complex DNA.     

A rapid DNA assembling strategy mediated by direct full-length polymerase chain reaction

An efficient DNA assembling strategy was developed here modified from Class-IIS endonuclease mediated DNA splicing by directed ligation (SDL). Benefited from the full-length PCR directly using ligation products as template, this strategy required less effort and less time to obtain the assembled full-length DNA. The advantages of this strategy made it a rapid and easy-to-perform gene splicing and multiple site-directed mutagenesis approach especially practicable when more fragments need to be assembled at the same time.     

Gene splicing and mutagenesis by PCR-driven overlap extension

Extension of overlapping gene segments by PCR is a simple, versatile technique for site-directed mutagenesis and gene splicing. Initial PCRs generate overlapping gene segments that are then used as template DNA for another PCR to create a full-length product. Internal primers generate overlapping, complementary 3' ends on the intermediate segments and introduce nucleotide substitutions, insertions or deletions for site-directed mutagenesis, or for gene splicing, encode the nucleotides found at the junction of adjoining gene segments. Overlapping strands of these intermediate products hybridize at this 3' region in a subsequent PCR and are extended to generate the full-length product amplified by flanking primers that can include restriction enzyme sites for inserting the product into an expression vector for cloning purposes. The highly efficient generation of mutant or chimeric genes by this method can easily be accomplished with standard laboratory reagents in approximately 1 week.     

Rapid and Efficient Gene Splicing Using Megaprimer-Based Protocol

Megaprimer-based methodology has been widely applied in site-directed mutagenesis, but rarely used in gene splicing. In this article, we describe a modification of the megaprimer PCR method, which can efficiently create and amplify a specific ligated chimeric gene segment in a PCR reaction and under a common PCR program that is widely used by researchers. More importantly, this modified method for splicing two or more gene fragments together revealed the mechanism of the megaprimer PCR method, by elucidating the key factor in the megaprimer-based protocol. In this method, the denatured megaprimer divided into two strands. One strand was used as template DNA to regenerate megaprimer and the other strand was used as an oligonucleotide primer to create a ligated chimeric gene product. In this article, we detail the modified megaprimer protocol for creating and amplifying these chimeric gene products, including a specific protocol for large chimeric gene products. We also provide additional tips to increase specificity and efficiency of the protocols. In conclusion, the improved megaprimer PCR protocol is a simple, broadly applicable protocol for splicing two different gene fragments together without relying on restriction sites. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

改造的HPV16型E7基因重组穿梭质粒的构建与鉴定

分别以卡介苗(BCG)基因组DNA及宫颈癌组织提取DNA为模板,通过PCR扩增得到19kD抗原的胞壁区及其上游调控元件(19ss)基因序列和HPV16型E7基因序列。先将19ss基因与大肠杆菌-分枝杆菌穿梭质粒pMV261重组,得到重组质粒pMCW。再将E7基因克隆至pMCW,得到重组质粒pMCW-E7。最后用PCR引物定点诱变法突变E7基因与转化有关的位点,得到重组质粒pMCW-mE7。对重组质粒pMCW-mE7用PCR扩增、双酶切及测序鉴定证实,19ss基因及突变的E7基因正确插入穿梭质粒pMV261。成功构建了重组穿梭质粒pMCW-mE7。     

Generation of anNco I restriction site for translational fusions using PCR-mediated,site-directed mutagenesis

A polymerase chain reaction-based method of site-directed mutagenesis was used to introduce anNco I restriction site on the translation start site of a tomato peroxidase gene. This quick and efficient method utilized two overlapping synthetic oligonucleotide primers containing the requisite base pair changes on the ATG translation start site and two flanking primers in PCR. The resulting DNA amplified fragments were fused together byNco I digestion at the mutated ends followed by a T4 ligation reaction. A rapid alternative method utilizing the overlapping fragments and the flanking primers in PCR can also be used for ligating the two fragments. Cloning and sequencing of the PCR-amplified fragments provided additional evidence for the presence of the site-specific mutations. Unique restriction sites upstream and downstream of the site-specific mutation allows for the easy transfer of this mutated region into the wild type peroxidase gene.     

Site-directed mutagenesis by overlap extension using the polymerase chain reaction

Overlap extension represents a new approach to genetic engineering. Complementary oligodeoxyribonucleotide (oligo) primers and the polymerase chain reaction are used to generate two DNA fragments having overlapping ends. These fragments are combined in a subsequent 'fusion' reaction in which the overlapping ends anneal, allowing the 3' overlap of each strand to serve as a primer for the 3' extension of the complementary strand. The resulting fusion product is amplified further by PCR. Specific alterations in the nucleotide (nt) sequence can be introduced by incorporating nucleotide changes into the overlapping oligo primers. Using this technique of site-directed mutagenesis, three variants of a mouse major histocompatibility complex class-I gene have been generated, cloned and analyzed. Screening of mutant clones revealed at least a 98% efficiency of mutagenesis. All clones sequenced contained the desired mutations, and a low frequency of random substitution estimated to occur at approx. 1 in 4000 nt was detected. This method represents a significant improvement over standard methods of site-directed mutagenesis because it is much faster, simpler and approaches 100% efficiency in the generation of mutant product.     

Enhanced Mutant Screening in One-step PCR-based Multiple Site-directed Plasmid Mutagenesis by Introduction of Silent Restriction Sites for Structural and Functional Study of Proteins

Site-directed mutagenesis (SDM) has been widely used for studying the structure and function of proteins. A one-step polymerase chain reaction (PCR)-based multiple site-directed plasmid mutagenesis method with extended non-overlapping sequence at the 3′ end of the primer increases the PCR amplification efficiency and the capacity of multi-site mutagenesis. Here, we introduced silent restriction sites in the primers used in this PCR-based SDM method by utilizing SDM-Assist software to generate mutants of Helicobacter pylori neutrophil-activating protein (HP-NAP), whose gene has low GC content. The HP-NAP mutants were efficiently generated by this modified mutagenesis method and quickly identified by a simple restriction digest due to the presence of the silent restriction site. This modified PCR-based SDM method with the introduction of a silent restriction site on the primer is efficient for generation and identification of mutations in the gene of interest.     

PCR技术对人IL-3 cDNA进行定点突变的研究

本文利用PCR技术对人IL-3cDNA体外进行定点突变,将人IL-3cDNA第3位Met,第116位Lys密码子突变为Val密码子GTT。PCR扩增片段核苷酸序列与引物设计相应的cDNA突变体序列完全一致。结果证实此方法比经典寡聚核苷酸方法简单、迅速、成本低、效率高,也为基因的修饰,蛋白质工程研究提供了简便、稳定的方法。     

用DREAM技术纠正人工合成基因中的突变

目的：介绍一种简便、有效的定点突变技术。方法：根据突变位点附近的DNA序列推导出氨基酸序列,再以此氨基酸序列进行逆翻译,这样在不改变氨基酸序列的前提下可以得到数目巨大的隐性突变体（silent mutants）,这些突变体中包含大量的限制性内切酶位点,选择合适的酶切位点设计引物用PCR技术扩增两侧DNA片段,然后以相应酶切融合这两个片段即可完成定点突变。结果：用该方法成功地在人工合成的含有缺失的可溶性组织因子基因的472位插入C,T两个碱基,校正了阅读框架,获得了预期的目的基因。结论：该方法简便、有效, 避免了多轮PCR和合成长引物导致突变的可能性,这种改进的PCR 定点诱变技术我们称之为“设计限制酶辅助突变”（Designed Restriction Enzyme Assisted Mutagenesis, DREAM）。此技术简单方便, 诱变的成功率高, 适于实验室常规应用。     

Construction of synthetic genes using PCR after automated DNA synthesis of their entire top and bottom strands.

A new method is described for the direct construction of synthetic genes by applying a modified version of the polymerase chain reaction (PCR) to crude oligonucleotide mixtures made by automated solid phase DNA synthesis. Construction of the HIV-1 393 bp rev gene and the 655 bp nef gene by this method is illustrated. The sequences for the entire top and bottom strands of rev were each programmed into an automated DNA synthesizer. Following DNA synthesis, the two crude oligonucleotide solutions were mixed together, specific primers were added, and the target gene was amplified by a modified PCR technique. Although the longer (greater than 200 bases) strands comprise a very small percentage of the total DNA after solid phase synthesis, this method uses PCR to 'find' and amplify such strands to create the target gene. The rev gene constructed by this method was found to contain 4 sequence errors, which were subsequently corrected by site-directed mutagenesis. In order to evaluate the source of sequence errors, several nef genes were made from the top and bottom strand DNA synthesis solutions using independent PCR's. Results suggest that sequence errors arose from both DNA synthesis and PCR. The utility of this method in producing a functional gene is demonstrated by expression of rev in E.coli.     

Construction of recombinant DNA by exonuclease recession.

We describe a new exonuclease-based method for joining and/or constructing two or more DNA molecules. DNA fragments containing ends complementary to those of a vector or another independent molecules were generated by the polymerase chain reaction. The 3' ends of these molecules as well as the vector DNA were then recessed by exonuclease activity and annealed in an orientation-determined manner via their complementary single-stranded regions. This recombinant DNA can be transformed directly into bacteria without a further ligase-dependent reaction. Using this approach, we have constructed recombinant DNA molecules rapidly, efficiently and directionally. This method can effectively replace conventional protocols for PCR cloning, PCR SOEing, DNA subcloning and site-directed mutagenesis.     

Rapid gene splicing and multi-sited mutagenesis by one-step overlap extension polymerase chain reaction

Gene splicing and site-directed mutagenesis (SDM) are important to introduce desired sequences in target DNA. However, introducing mutations at multiple sites requires multiple steps of DNA manipulation, which is time-consuming and labor-intensive. Here, we present a rapid efficient gene splicing and multi-sited mutagenesis method that introduces mutations at two distant sites via sequential connection of DNA fragments by one-step overlap extension polymerase chain reaction (OE-PCR). This bottom-up approach for DNA engineering can be broadly used to study protein structure-function, to optimize codon use for protein expression, and to assemble genes of interest.     

A rapid and efficient PCR-based mutagenesis method applicable to cell physiology study

PCR-based mutagenesis is a cornerstone of molecular biology and protein engineering studies. Herein we describe a rapid and highly efficient mutagenesis method using type IIs restriction enzymes. A template gene is amplified into two separate PCR fragments using two pairs of anchor and mutagenic primers. Mutated sequences are located near the recognition site of a type IIs restriction enzyme. After digestion of two fragments with a type IIs enzyme, exposed cohesive ends that are complementary to each other are then ligated together to generate a mutated gene. We applied this method to introduce multiple site-directed mutations in EGFP and Bcl-2 family genes and observed perfect mutagenesis efficiency at the desired sites. This efficient and cost-effective mutagenesis method can be applied to a wide variety of structural and functional studies in cell physiology. Type IIs restriction enzyme; enhanced green fluorescent protein; Bcl-2     

A method for clone sequence confirmation using a mismatch-specific DNA endonuclease

Site-directed mutagenesis and polymerase chain reaction (PCR)-based cloning are well-established methods carried out routinely in most modern molecular biology laboratories. Application of these methods requires confirmation of the DNA sequence of the target gene by sequencing of DNA purified from multiple colonies, a laborious process. We have developed an alternative approach to screen DNA amplified directly from colony DNA for both desired and undesired mutations. This approach is based on the use of a plant mismatch DNA endonuclease, Surveyor Nuclease, to directly screen clones derived by site-directed mutagenesis. We have also used this approach to identify error-free clones of three genes from celery cDNA produced by PCR and TOPO cloning. Sequence confirmation using Surveyor Nuclease provides a fast and simple approach to obtain desired clones from site-directed mutagenesis and PCR-based cloning methods without the necessity of sequencing DNAs purified from multiple clones.     

一种快速获得基因密码子偏爱性改造的方法-SOE-PCR

SOE-PCR采用具有互补末端的引物,使PCR产物形成重叠链,在不需要内切酶消化和连接酶处理的条件下实现DNA片段的拼接,能够高效、快速地实现基因的定点突变。应用SOE-PCR原理成功地实现了对几丁质酶基因chi58的5个位点的突变,构建了几丁质酶基因密码子偏爱性改造突变体-chi58A。实验证明,SOE-PCR具有简捷、快速、高效的优点。扩增过程中未引入其他突变,获得的chi58A突变体基因片段可以用于后续的分子克隆。     

一步法定点突变技术快速构建bsh基因突变启动子

目的：建立一种高效便捷的定点突变方法,为基因表达调控以及蛋白质结构和功能的研究提供技术支撑。方法：以构建单核细胞增生李斯特菌（Listeria monocytogenes）中编码胆碱水解酶（bile salt hydrolase,BSH）的bsh基因突变启动子为例,采用一对完全互补并带有突变位点的引物扩增携带bsh基因启动子的重组质粒DNA全序列,通过DpnⅠ消化PCR产物中剩余的甲基化的模板DNA,酶切后的PCR产物直接转化大肠杆菌,从而获得含有突变启动子的重组质粒。结果：通过一步法定点突变技术成功构建了bsh基因的三种突变启动子。结论：该方法简单高效,只要把握好对引物设计,高保真的DNA聚合酶、模板DNA的浓度以及PCR扩增程序的选择,突变成功率可以达到100%。