Traceless Splicing Enabled by Substrate-Induced Activation of the Nostoc punctiforme Npu DnaE Intein after Mutation of a Catalytic Cysteine to Serine

Inteins self-catalytically cleave out of precursor proteins while ligating the surrounding extein fragments with a native peptide bond. Much attention has been lavished on these molecular marvels with the hope of understanding and harnessing their chemistry for novel biochemical transformations including coupling peptides from synthetic or biological origins and controlling protein function. Despite an abundance of powerful applications, the use of inteins is still hampered by limitations in our understanding of their specificity (defined as flanking sequences that permit splicing) and the challenge of inserting inteins into target proteins. We examined the frequently used Nostoc punctiforme Npu DnaE intein after the C-extein cysteine nucleophile (Cys+1) was mutated to serine or threonine. Previous studies demonstrated reduced rates and/or splicing yields with the Npu DnaE intein after mutation of Cys+1 to Ser+1. In this study, genetic selection identified extein sequences with Ser+1 that enabled the Npu DnaE intein to splice with only a 5-fold reduction in rate compared to the wild-type Cys+1 intein and without mutation of the intein itself to activate Ser+1 as a nucleophile. Three different proteins spliced efficiently after insertion of the intein flanked by the selected sequences. We then used this selected specificity to achieve traceless splicing in a targeted enzyme at a location predicted by primary sequence similarity to only the selected C-extein sequence. This study highlights the latent catalytic potential of the Npu DnaE intein to splice with an alternative nucleophile and enables broader intein utility by increasing insertion site choices.     

Control of protein splicing by intein fragment reassembly.

Inteins are protein splicing elements that mediate their excision from precursor proteins and the joining of the flanking protein sequences (exteins). In this study, protein splicing was controlled by splitting precursor proteins within the Psp Pol-1 intein and expressing the resultant fragments in separate hosts. Reconstitution of an active intein was achieved by in vitro assembly of precursor fragments. Both splicing and intein endonuclease activity were restored. Complementary fragments from two of the three fragmentation positions tested were able to splice in vitro. Fragments resulting in redundant overlaps of intein sequences or containing affinity tags at the fragmentation sites were able to splice. Fragment pairs resulting in a gap in the intein sequence failed to splice or cleave. However, similar deletions in unfragmented precursors also failed to splice or cleave. Single splice junction cleavage was not observed with single fragments. In vitro splicing of intein fragments under native conditions was achieved using mini exteins. Trans-splicing allows differential modification of defined regions of a protein prior to extein ligation, generating partially labeled proteins for NMR analysis or enabling the study of the effects of any type of protein modification on a limited region of a protein.     

Highly efficient and more general cis- and trans-splicing inteins through sequential directed evolution

Inteins are internal protein sequences that post-translationally self-excise and splice together the flanking sequences, the so-called exteins. Natural and engineered inteins have been used in many practical applications. However, inteins are often inefficient or inactive when placed in a non-native host protein and may require the presence of several amino acid residues of the native exteins, which will then remain as a potential scar in the spliced protein. Thus, more general inteins that overcome these limitations are highly desirable. Here we report sequential directed evolution as a new approach to produce inteins with such properties. Random mutants of the Ssp (Synechocystis sp. PCC 6803) DnaB mini-intein were inserted into the protein conferring kanamycin resistance at a site where the parent intein was inactive for splicing. The mutants selected for splicing activity were further improved by iterating the procedure for two more cycles at different positions in the same protein. The resulting improved inteins showed high activity in the positions of the first rounds of selection, in multiple new insertion sites, and in different proteins. One of these inteins, the M86 mutant, which accumulated 8 amino acid substitutions, was also biochemically characterized in an artificially split form with a chemically synthesized N-terminal intein fragment consisting of 11 amino acids. When compared with the unevolved split intein, it exhibited an ～60-fold increased rate in the protein trans-splicing reaction and a K(d) value for the interaction of the split intein fragments improved by an order of magnitude. Implications on the intein structure-function, practical application, and evolution are discussed.     

Post-translational environmental switch of RadA activity by extein–intein interactions in protein splicing

Post-translational control based on an environmentally sensitive intervening intein sequence is described. Inteins are invasive genetic elements that self-splice at the protein level from the flanking host protein, the exteins. Here we show in Escherichia coli and in vitro that splicing of the RadA intein located in the ATPase domain of the hyperthermophilic archaeon Pyrococcus horikoshii is strongly regulated by the native exteins, which lock the intein in an inactive state. High temperature or solution conditions can unlock the intein for full activity, as can remote extein point mutations. Notably, this splicing trap occurs through interactions between distant residues in the native exteins and the intein, in three-dimensional space. The exteins might thereby serve as an environmental sensor, releasing the intein for full activity only at optimal growth conditions for the native organism, while sparing ATP consumption under conditions of cold-shock. This partnership between the intein and its exteins, which implies coevolution of the parasitic intein and its host protein may provide a novel means of post-translational control.     

内含肽介导的生物学效应及其应用

蛋白质翻译产物在成熟过程中剪切释放出来的一段氨基酸序列称为“intein”---即内含肽。它与前体蛋白以框内融合的形式共同翻译,并内嵌于前体蛋白序列中。内含肽的解离以及内含肽两侧氨基酸序列的连接是在内含肽自身催化作用下完成的。本文将从内含肽的发现、结构特征和作用机理等方面对这种具有特殊意义的蛋白质成熟机制进行较为全面的论述,同时介绍了近年来发展起来的以内含肽介导的蛋白质剪接为基础的蛋白质纯化和改造技术。     

Inteins, valuable genetic elements in molecular biology and biotechnology

Inteins are internal protein elements that self-excise from their host protein and catalyze ligation of the flanking sequences (exteins) with a peptide bond. They are found in organisms in all three domains of life, and in viral proteins. Intein excision is a posttranslational process that does not require auxiliary enzymes or cofactors. This self-excision process is called protein splicing, by analogy to the splicing of RNA introns from pre-mRNA. Protein splicing involves only four intramolecular reactions, and a small number of key catalytic residues in the intein and exteins. Protein-splicing can also occur in trans. In this case, the intein is separated into N- and C-terminal domains, which are synthesized as separate components, each joined to an extein. The intein domains reassemble and link the joined exteins into a single functional protein. Understanding the cis- and trans-protein splicing mechanisms led to the development of intein-mediated protein-engineering applications, such as protein purification, ligation, cyclization, and selenoprotein production. This review summarizes the catalytic activities and structures of inteins, and focuses on the advantages of some recent intein applications in molecular biology and biotechnology.     

Protein Splicing: How Inteins Escape from Precursor Proteins

Inteins are nature''s escape artists; they facilitate their excision from flanking polypeptides (exteins) concomitant with extein ligation to produce a mature host protein. Splicing requires sequential nucleophilic displacement reactions catalyzed by strategies similar to proteases and asparagine lyases. Inteins require precise reaction coordination rather than rapid turnover or tight substrate binding because they are single turnover enzymes with covalently linked substrates. This has allowed inteins to explore alternative mechanisms with different steps or to use different methods for activation and coordination of the steps. Pressing issues include understanding the underlying details of catalysis and how the splicing steps are controlled.     

Trans-splicing of an artificially split fungal mini-intein

Inteins are internal protein domains found inside the coding region of different proteins. They can autocatalytically self-excise from their host protein and ligate the protein flanks, called exteins, with a peptide bond via a post-translational process called protein cis-splicing. In contrast, protein trans-splicing involves inteins split into an N- and a C-terminal domain. Both domains are synthesized as two separate components and each joined to an extein; the intein domains can reassemble and link the joined exteins into one functional protein. In this study, we introduced three split sites into the PRP8 mini-intein of Penicillium chrysogenum and demonstrated for the first time trans-splicing of a fungal PRP8 intein. Two of the sites introduced allowed splicing to occur in trans while the third was not functional.     

NMR and crystal structures of the Pyrococcus horikoshii RadA intein guide a strategy for engineering a highly efficient and promiscuous intein

In protein splicing, an intervening protein sequence (intein) in the host protein excises itself out and ligates two split host protein sequences (exteins) to produce a mature host protein. Inteins require the involvement for the splicing of the first residue of the extein that follows the intein (which is Cys, Ser, or Thr). Other extein residues near the splicing junctions could modulate splicing efficiency even when they are not directly involved in catalysis. Mutual interdependence between this molecular parasite (intein) and its host protein (exteins) is not beneficial for intein spread but could be advantageous for intein survival during evolution. Elucidating extein-intein dependency has increasingly become important since inteins are recognized as useful biotechnological tools for protein ligation. We determined the structures of one of inteins with high splicing efficiency, the RadA intein from Pyrococcus horikoshii (PhoRadA). The solution NMR structure and the crystal structures elucidated the structural basis for its high efficiency and directed our efforts of engineering that led to rational design of a functional minimized RadA intein. The crystal structure of the minimized RadA intein also revealed the precise interactions between N-extein and the intein. We systematically analyzed the effects at the -1 position of N-extein and were able to significantly improve the splicing efficiency of a less robust splicing variant by eliminating the unfavorable extein-intein interactions observed in the structure. This work provides an example of how unveiling structure-function relationships of inteins offer a promising way of improving their properties as better tools for protein engineering.     

异源生物中筛选高剪接活性Intein系统的建立

原始物种体内蛋白质内含子（intein）介导的自催化蛋白剪接反应以100%效率进行.当这些蛋白质内含子被克隆入异源物种时,其剪接效率往往大大降低,绝大多数甚至完全失去剪接能力.本研究根据蛋白质内含子剪接活性与蛋白质外显子（extein）C端第1个保守氨基酸直接相关的特点,设计含有所有这些保守氨基酸的多个短的蛋白质外显子序列,通过PCR引入到卡那霉素抗性蛋白（KanR）的不同位点中,在此外显子中克隆入相应的蛋白质内含子,构建在大肠杆菌中依赖卡那霉素抗性来筛选高剪接活性蛋白质内含子的系统.结果显示,卡那霉素平板上菌落生长的结果与Western印迹检测的结果基本一致.说明建立的筛选高剪接活性蛋白质内含子系统成功.这种含有可选择蛋白质外显子的筛选系统,将蛋白质剪接与卡那霉素抗性相结合,直接从平板上观测剪接结果,成为快速、稳定筛选在异源物种中具有剪接活性蛋白内含子的新手段.     

Structural and Dynamical Features of Inteins and Implications on Protein Splicing

Protein splicing is a posttranslational modification where intervening proteins (inteins) cleave themselves from larger precursor proteins and ligate their flanking polypeptides (exteins) through a multistep chemical reaction. First thought to be an anomaly found in only a few organisms, protein splicing by inteins has since been observed in microorganisms from all domains of life. Despite this broad phylogenetic distribution, all inteins share common structural features such as a horseshoe-like pseudo two-fold symmetric fold, several canonical sequence motifs, and similar splicing mechanisms. Intriguingly, the splicing efficiencies and substrate specificity of different inteins vary considerably, reflecting subtle changes in the chemical mechanism of splicing, linked to their local structure and dynamics. As intein chemistry has widespread use in protein chemistry, understanding the structural and dynamical aspects of inteins is crucial for intein engineering and the improvement of intein-based technologies.     

Protein splicing mechanisms and applications

Inteins are protein splicing elements that employ standard enzyme strategies to excise themselves from precursor proteins and ligate the surrounding sequences (exteins). The protein splicing pathway consists of four nucleophilic displacements directed by the intein plus the first C-extein residue. The intein active site(s) are formed by folding of the intein within the precursor, which brings together the splice junctions and internal intein residues that assist catalysis. Inteins with non-canonical catalytic residues splice by modified pathways. Understanding intein proteolytic cleavage and ligation activities has led to the development of many novel applications in the fields of protein engineering, enzymology, microarray production, target detection and activation of transgenes in plants. Recent advances include intein-mediated attachment of proteins to solid supports for microarray or western blot analysis, linking nucleic acids to proteins and controllable splicing, which converts inteins into molecular switches.     

Electronic structure of neighboring extein residue modulates intein C-terminal cleavage activity

Protein splicing is an autocatalytic reaction where an intervening element (intein) is excised and the remaining two flanking sequences (exteins) are joined. The reaction requires specific conserved residues, and activity may be affected by both the intein and the extein sequence. Predicting how sequence will affect activity is a challenging task. Based on first-principles density functional theory and multiscale quantum mechanics/molecular mechanics, we report C-terminal cleavage reaction rates for five mutations at the first residue of the C-extein (+1), and describe molecular properties that may be used as predictors for future mutations. Independently, we report on experimental characterization of the same set of mutations at the +1 residue resulting in a wide range of C-terminal cleavage activities. With some exceptions, there is general agreement between computational rates and experimental cleavage, giving molecular insight into previous claims that the +1 extein residue affects intein catalysis. These data suggest utilization of attenuating +1 mutants for intein-mediated protein manipulations because they facilitate precursor accumulation in vivo for standard purification schemes. A more detailed analysis of the “+1 effect” will also help to predict sequence-defined effects on insertion points of the intein into proteins of interest.     

Unprecedented rates and efficiencies revealed for new natural split inteins from metagenomic sources

Inteins excise themselves out of precursor proteins by the protein splicing reaction and have emerged as valuable protein engineering tools in numerous and diverse biotechnological applications. Split inteins have recently attracted particular interest because of the opportunities associated with generating a protein from two separate polypeptides and with trans-cleavage applications made possible by split intein mutants. However, natural split inteins are rare and differ greatly in their usefulness with regard to the achievable rates and yields. Here we report the first functional characterization of new split inteins previously identified by bioinformatics from metagenomic sources. The N- and C-terminal fragments of the four inteins gp41-1, gp41-8, NrdJ-1, and IMPDH-1 were prepared as fusion constructs with model proteins. Upon incubation of complementary pairs, we observed trans-splicing reactions with unprecedented rates and yields for all four inteins. Furthermore, no side reactions were detectable, and the precursor constructs were consumed virtually quantitatively. The rate for the gp41-1 intein, the most active intein on all accounts, was k = 1.8 ± 0.5 × 10(-1) s(-1), which is ～10-fold faster than the rate reported for the Npu DnaE intein and gives rise to completed reactions within 20-30 s. No cross-reactivity in exogenous combinations was observed. Using C1A mutants, all inteins were efficient in the C-terminal cleavage reaction, albeit at lower rates. C-terminal cleavage could be performed under a wide range of reaction conditions and also in the absence of native extein residues flanking the intein. Thus, these inteins hold great potential for splicing and cleavage applications.     

Protein splicing of the three Pyrococcus abyssi ribonucleotide reductase inteins

An intein is a polypeptide that interrupts the functional domains of a protein, called the exteins. The intein can facilitate its own excision from the exteins, concomitant with the ligation of the exteins, in a process called protein splicing. The alpha subunit of the ribonucleotide reductase of the extreme thermophile Pyrococcus abyssi is interrupted by three inteins in separate insertion sites. Each intein can facilitate protein splicing when over-expressed in Escherichia coli, with affinity domains serving as the exteins. The influence of the N-terminal flanking residue on the efficiency of splicing is specific to each intein. Each intein has a different downstream nucleophilic residue, and cannot tolerate substitution to a residue of lesser or equal nucleophilicity. The influence of the conserved penultimate His also differs between the inteins.     

内含肽介导的蛋白连接技术及其应用

内含肽介导的蛋白质剪接是一种自发的翻译后事件,内含肽可介导其自身从前体蛋白上切除,同时将其两侧的外显肽连接起来.在过去10多年中,基于蛋白质剪接原理发展出的蛋白连接技术被广泛的用于蛋白质工程的研究中.这些技术打破了化学合成方法中对目标物大小的限制,有助于化学和生物学的研究.针对近年由蛋白质连接演化出来的新技术及其应用做简要的阐述.     

Intein-containing chimeric protein construction and evaluation of its cleavage conditions

Protein splicing is a post-translational autocatalytic process that results in excision of internal peptide (intein) from a precursor protein and the ligation of the flanking protein sequences (exteins). High specificity of the intein-mediated excision of protein precursors allows the use of protein splicing in biotechnology. This work was aimed at the obtaining of human growth hormone with a native N-terminus in E. coli. Chimerical protein consisting of a short N-terminal peptide, Mxe GyrA intein and human growth hormone was created. During the translation formyl-methionine modified N-terminal peptide should have been removed by splicing. Intein was shown to mediate the cleavage of exteins, but their subsequent ligation was not observed. That allowed the preparation of human growth hormone with a native N-terminus. The effect of various factors on cleavage efficiency was studied. The most efficient cleavage of chimeric protein (60-80%) was achieved in the presence of inductor (100 mM beta-mercaptoethanol) upon the incubation for 4-6 days.     

Structure–activity studies on the upstream splice junction of a semisynthetic intein

Protein trans-splicing by split inteins holds great potential for the chemical modification and semisynthesis of proteins. However, the structural requirements of the extein sequences immediately flanking the intein are only poorly understood. This knowledge is of particular importance for protein labeling, when synthetic moieties are to be attached to the protein of interest as seamlessly as possible. Using the semisynthetic Ssp DnaB intein both in form of its wild-type sequence and its evolved M86 mutant, we systematically varied the sequence upstream of the short synthetic Int^N fragment using both proteinogenic amino acids and unnatural building blocks. We could show for the wild-type variant that the native N-extein sequence could be reduced to the glycine residue at the (?1) position directly flanking the intein without significant loss of activity. The glycine at this position is strongly preferred over building blocks containing a phenyl group or extended alkyl chain adjacent to the scissile amide bond of the N-terminal splice junction. Despite their negative effects on the splicing yields, these unnatural substrates were well processed in the N–S acyl shift to form the respective thioesters and did not result in an increased decoupling of the asparagine cyclization step at the C-terminal splicing junction. Therefore, the transesterification step appeared to be the bottleneck of the protein splicing pathway. The fluorophore 7-hydroxycoumarinyl-4-acetic acid as a minimal N-extein was efficiently ligated to the model protein, in particular with the M86 mutant, probably because of its higher resemblance to glycine with an aliphatic c-α carbon atom at the (?1) position. This finding indicates a way for the virtually traceless labeling of proteins without inserting extra flanking residues. Due to its overall higher activity, the M86 mutant appears most promising for many protein labeling and chemical modification schemes using the split intein approach.     

The mechanism of intein-mediated protein splicing: variations on a theme

Intein-mediated protein splicing is facilitated by four separate but coordinated nucleophilic displacement reactions that result in the excision of the intein and the ligation of the flanking polypeptides, called the exteins. These reactions are catalyzed by the intein plus the first downstream extein amino acid without the assistance of cofactors or auxiliary enzymes. Non-canonical inteins missing conserved nucleophilic residues at the N- or C-terminus likely splice using variations of the standard mechanism.     

蛋白质剪接研究进展

蛋白质剪接是一个翻译后自催化加工过程,它不需要酶或其他辅助因子的参与。在这个过程中,前体蛋白的Intein(内含肽)被切离,其两侧的Extein(外显肽)连接在一起。Intein按结构可分为经典Intein和微型Intein,其中的经典Intein包括Hint结构域和中间的归巢内切酶结构域(该结构域在微型内含肽中不存在)。蛋白质剪接及其他具有Hint结构域的蛋白加工过程的起始步骤是N-S/O酰基重排反应,该反应是由Hint结构域催化的;Intein的剪接还分为顺式剪接和反式剪接,通过对Intein进行改造,可以阻断剪接过程,但不影响N端肽键或C端肽键的断裂;通过筛选突变体,可以获得温度敏感型、pH敏感型或小分子诱导型的内含肽。这些研究促进了Intein在多肽制备及其它方面的应用。