利用重组自交系进行陆地棉产量及产量构成因子性状的QTL定位

以高产陆地棉栽培品种中棉所12和8891的杂交组合湘杂棉2号为材料,采用单粒传法构建了含有180个家系的重组自交系(RILs)群体。本研究的目的是分析产量及其构成因子的相互关系并进行相应的QTL定位。重组自交系群体、两亲本和F1于2002年、2003年分别种植于南京农业大学江浦实验农场和江苏省灌云棉花基地。收获每行中间五株的籽棉并考察产量及产量构成因子性状。调查的产量及产量构成因子性状包括单株籽棉产量、单株皮棉产量、单株铃数、铃重、衣分、衣指和籽指。筛选了4,106对SSR引物和384个AFLP引物组合,分别得到127和18个多态位点;此外,2个RAPD引物、1个SRAP引物组合以及来自亲本8891的显性黄花药基因P1也被用来作为标记检测群体基因型。最终共获得149个多态位点,其中132个位点分布于26个染色体/连锁群,覆盖865.20cM,约占棉花基因组的18.57%,标记间平均距离6.55cM。利用此遗传图谱结合重组自交系群体3个环境下的产量及产量构成因子性状,应用QTLCartographer2.0的复合区间作图法进行单位点QTL定位。对各环境资料的分离分析共定位出34个QTL,而利用三环境平均值的联合分析定位出15个QTL。本研究定位的QTL可为棉花产量育种提供信息,其中衣分QTLqLP-A10-1在联合分析及分离分析下的两个环境都能检测到,可能对标记辅助选择有实际应用价值。通径分析结果表明,各产量构成因子中,铃数对皮棉产量贡献最大,这与产量构成因素性状在F1的杂种优势表现一致;因此,在棉花育种上,可优先考虑单株铃数并结合其它产量构成因素进行品种选育和杂交组合选配。     

利用双单倍体群体剖析水稻产量及其相关性状的遗传基础

主效QTL、上位性效应和它们与环境的互作(QE)都是数量性状的重要遗传因素。利用籼粳交珍汕97／武育粳2号F1植株上的花药进行组织培养得到的190个双单倍体群体和179个微卫星标记,通过两年两重复田间试验,采用混合线性模型方法分析了9个控制水稻产量及其相关性状的遗传效应,得到57个主效QTL,41对上位性互作,8对QTL与环境的互作和7对上位性效应与环境的互作。单个主效QTL解释这些性状1．3％～25．8％的表型方差。各性状QTL的累积表型贡献率达11．5％～66．8％。大多数性状之间具有显著的表型相关性,相关性较高的性状之间常具有较多共同或紧密连锁的QTL。结果表明,基因的多效性或紧密连锁可能是性状相关的重要遗传基础。     

水稻生物学产量及其构成性状的QTL定位

QTL的加性效应、加性×加性上位性效应及它们与环境的互作效应是数量性状的重要遗传分量.利用IR64/Azucena的125个DH品系为群体,分析了水稻生物学产量及其两个构成性状干草产量和谷粒产量的遗传组成.用基于混合模型的复合区间作图(MCIM)方法进行QTL定位.检测到12个位点有加性主效应,27个位点涉及双位点互作,18个位点存在环境互作.结果表明水稻生物学产量和它的两个构成性状普遍存在上位性效应和QE互作效应.此外,还探讨了性状间相关的遗传基础.发现4个QTLs和一对上位性QTLs可能与生物学产量与干草产量之间的正相关有关.3个QTL可能与干草产量与谷粒产量之间的负相关有关.这些结果可能部分地解释了这3个性状相关的遗传原因.通过对水稻生物学产量及其两个构成性状所定位QTL的分析,加深了对数量性状QTL的认识.首先,QTL的上位性效应和QE互作效应是普遍存在的;其次,QTL的多效性或紧密连锁可能是遗传相关的原因,当QTL对两个性状作用的方向相同时可导致正向遗传相关,反之则为负向遗传相关,当有些QTL表现为同向作用而另一些QTL表现为反向作用时,则可削弱性状间的遗传相关性;第三,复合性状的QTL效应可分解为其组成性状的QTL效应,如果QTL对各组成性状的效应方向相反而相互抵消,可使复合性状的QTL效应不易被检测;第四,加性效应的QTL常参预构成上位性效应,而具有上位性效应的QTL并非都有加性主效应,表明忽略上位性的QTL定位方法会降低检测QTL的功效;最后,鉴别不同类型的QTL效应有利于指导育种实践,选择主效QTL适用于多环境,QE互作QTL适用于特定环境,对上位性QTL应强调选择基因组合而并非单个基因.     

稻米粒形的QTL定位及上位性和QE互作分析

利用'广陆矮4号'×'佳辐占'水稻重组自交系构建了SSR标记的遗传图谱.联合2007年和2008年获得的两组稻米粒长(GL)、粒宽(GW)、长宽比(L/W)数据应用混合线性模型方法进行QTL定位,并作加性效应、加性×加性上位互作效应以及加性QTL、上位性QTL与环境的互作效应分析.结果显示;(1)在加性效应分析中两个群体共检测到4个控制粒长的QTL,4个控制粒宽的QTL,5个控制长宽比的QTL,贡献率分别为13.81%、15.36%和 16.29%.(2)在上位互作效应分析中两个群体共检测到2对控制粒长的互作QTL,1对控制粒宽的互作QTL,3对控制长宽比的互作QTL,贡献率分别为5.77%、2.59%和7.42%.(3)环境互作检测中,发现共有13个加性QTL和4对QTL的加性×加性上位性与环境产生了互作效应.结果表明,上位性效应和加性效应都影响稻米粒形遗传,QE互作效应也对粒形有着显著的影响.     

水稻生育后期叶绿素含量的QTLs及其与环境的互作分析

利用Dular和Lemont杂交后代单粒传衍生的123个F12家系所组成的重组自交系（RILs）群体,研究水稻剑叶叶绿素含量的数量性状基因座（QTL）.分别在2005年和2006年考察该RIL群体齐穗期剑叶叶绿素含量,并进行QTL定位和上位性分析及其与环境的互作效应分析.结果表明：在4对染色体上共检测到10个控制叶绿素含量的加性QTLs,共解释了73.51%的遗传变异,单个QTL的表型贡献率为2.08%～20.14%,其中6个和环境存在显著互作;同时也检测到13对影响叶绿素含量的加性×加性上位性互作,其中6对具有显著的上位性环境互作效应.     

芥菜型油菜每角籽粒数QTL 的上位性互作和环境互作分析

【目的】为揭示芥菜型油菜及芸薹属作物每角籽粒数形成的分子机理,提高和改良芥菜型油菜产量和育种工作奠定基础。【方法】研究以包含221个芥菜型油菜株系的重组自交系(recombinant inbred line, RIL)群体为材料,在5个环境条件下对每角籽粒数性状进行加性QTL、加性×加性上位互作及环境互作分析。【结果】(1)共检测到7个与每角籽粒数相关的加性QTL,主要分布在芥菜型油菜A02、A03、A05、A08、B02和B03等染色体上,其加性效应分布在(-11.642 4)～4.524 6之间,其中qSS2-71的加性效应和遗传率均最大,分别达到-11.642 4和14.44%,其余6个加性QTL的加性效应和遗传率均较小;(2)检测到7对影响每角籽粒数的加性×加性QTL上位互作效应及其与环境的互作效应,上位性QTL互作效应值分布在(-4.930 8)～4.193 6之间,7对上位性QTL与不同环境互作的遗传力均接近0;(3)每角籽粒数性状的广义遗传率为80.98%,狭义遗传率为30.98%。【结论】综合分析,芥菜型油菜每角籽粒数受一定环境影响,但控制该性状的加性效应受环境影响较小...     

玉米杂交种掖单13号的SSR连锁图谱构建与叶夹角和叶向值的QTL定位与分析

为了增加单位面积产量, 玉米育种者已经开始了更密植更紧凑株型的选育。叶夹角和叶向值是评价玉米株型的重要指标。本研究以掖478×丹340的500个F2单株为作图群体, 构建了具有138个位点的SSR标记连锁图谱, 图谱总长度为1 394.9 cM, 平均间距10.1 cM。利用397个F2：3家系对叶夹角和叶向值进行QTL定位分析, 结果表明: 叶夹角和叶向值分别检测到6和8个QTL, 累计解释表型变异41.0%和60.8%, 单个QTL的贡献率在2.9%~13.6%之间。与叶夹角和叶向值有关的基因主要作用方式为加性和部分显性。此外两个性状共检测到9对上位性互作位点, 表明上位性互作在叶夹角和叶向值的遗传中也起较重要的作用。     

水稻分蘖角度的QTL定位和主效基因的遗传分析

利用水稻籼粳亚种间组合Asominori×IR24重组自交系(RIL)群体71个株系和相应的全基因组染色体片段置换系(Chromosomesegmentsubstitutionline,CSSL)群体65个株系,在2种环境下对分蘖角度性状进行了数量性状基因座(QTL)定位和上位性效应的遗传分析。在两种群体中都出现了分蘖角度的超亲分离。在RIL群体中发现了5个主效QTLs和3对上位性双位点互作标记基因座,控制水稻分蘖角度。其中在第9染色体上位于XNpb108~C506RFLP分子标记区间的qTA-9基因座在2种环境中同时出现,其贡献率平均为28·6%,增加分蘖角度的等位基因来自籼稻品种IR24。利用CSSL群体图示基因型分析,证实在第9染色体上含有RFLP标记C609和C506约15cM的染色体区段,存在增加分蘖角度的基因,来源于染色体片段供体亲本IR24,在Asominori的遗传背景中能增加分蘖角度约15°,该基因的位置与RIL群体在第9染色体上定位的QTL相同,证实了qTA-9的存在。F1表型测定及F2代遗传分析表明,来自IR24的等位基因是一个不完全显性基因。除一对上位性位点存在显著的环境互作效应外,未发现其他位点存在与环境的互作效应。不同基因的加性效应和双位点的上位性效应的共同作用可能是造成水稻分蘖角度超亲分离的主要原因。     

水稻叶片性状和根系活力的QTL定位

应用由247个株系组成的珍汕97B/密阳46重组自交系(RIL)群体及其分子标记连锁图谱,检测控制剑叶、倒二叶、倒三叶的5个形态性状和控制根系伤流量性状的数量性状座位(QTL)。在9个标记区间检测到控制叶片形态性状的24个QTL,LOD值为2．9～11．8,单个QTL的表型变异贡献率为4．0％～32．5％;分别检测到56对和4对控制叶片形态和根系活力的上位性互作,绝大多数互作发生在2个不表现加性效应的座位之间。与该群体产量性状QTL的研究结果相比较,发现控制叶片性状和根系活力的QTL与产量性状QTL往往处于相似的染色体区间。     

应用中国和欧洲油菜建立的双二倍体群体对3个重要农艺性状的QTL定位以及与环境的互作分析

以中国的高油分自交系“高油”和欧洲高含油量品种“Sollux”的F1产生的282个株系组成的双二倍体(DH)群体为材料,在125个SSR标记座位构建的连锁图谱基础上,根据在中国和欧洲四个不同环境下的表型鉴定结果,采用混合线性模型基础上的QTL分析软件,对油菜3个重要农艺性状:株高,开花期和成熟期进行了数量性状基因座位(QTL)的联合定位分析,估测了这些QTL的加性、上位性以及与环境的互作效应。结果表明各性状均受多个加性、加加上位以及与环境互作的QTL控制。株高受多个QTL影响(12个位点具有加性或兼有环境互作效应,5个位点具有互作效应),以加性效应为主,加性效应总和可解释定位群体表型变异的75%左右,并多兼有上位性效应。12个主效QTL中,9个是“高油”等位基因相对“Sollux”有降低株高的作用,大多数加性×环境互作QTL的有效等位基因具有环境选择特异性。7个ae基因座位中,5个“高油”等位基因在杭州种植环境下,除一例外所有在德国环境下的互作基因座中,“Sollux”等位基因起着增加株高的作用,加加上位性主效总和为加性主效总和的三分之一。7个控制花期和8个控制成熟期的主效QTL中,分别有6个和5个是来自“高油”的等位基因相对“Sollux”具有提前开花和成熟的效应,这些QTL的效应总和占到性状表型变异的60%左右。5个位于第2和第12连锁群中的2个大效应QTL可能和已多次报导的VFN1和VFN3基因相近或相同。开花期和成熟期两性状均检测到显著的ae互作效应,双亲等位基因的效应在各环境下呈离散分布。位于14和19连锁群上的两个主效株高QTL同时也是控制开花期和油分含量的基因位点,因而利用这两个位点进行标记辅助筛选时要考虑到对油分含量的影响。控制成熟期的8个主效QTL中有3个同时也是控制开花期的基因座位,证实了开花期和成熟期高度正相关的遗传基础,两个生育性状均表现有较弱的QTL间加加上位互作,但以主效QTL的作用为主。     

QTL Mapping for Plant Architecture Traits in Upland Cotton Using RILs and SSR Markers

Xiangzamian 2 (XZM2) is the most widely cultivated cotton hybrid in China. By crossing two parents Zhongmiansuo 12 and 8891 and upon subsequent selfings, we got F₈ and F₉ populations having 180 recombinant inbred lines. Ten plant architecture traits were investigated in two years with this population. A genetic map was constructed mainly with SSR markers. Quantitative trait loci (QTL) conditioning plant architecture traits were determined at the single-locus and double-locus levels. The results showed that epistastic effects as well as additive effects of QTL played an important role as the genetic basis of cotton plant architecture. The QTL detected in our research might provide new information on improving plant architecture traits. The polymorphism of molecular markers between ZMS12 and 8891 were quite limited, while significant differences between their phenotypes were found and the hybrid XZM2 expressed high heterosis in yield. All these could be partly explained by the effect of epistatic QTL.     

Quantitative trait loci controlling plant architectural traits in cotton

Cotton plant architecture is an important characteristic influencing the suitability of specific cotton varieties in cultivation, fiber yield and quality. However, complex multigenic relationships and substantial genotype–environment interaction underlie plant architecture, and will hinder the efficient improvement of these traits in conventional cotton breeding programs. An enhanced understanding of the molecular-genetic regulation of plant morphological developmental can aid in the modification of agronomically relevant traits. In this study, an interspecific Gossypium hirsutum and Gossypium barbadense BC₁ population was used to identify QTL associated with plant architectural traits. Twenty-six single QTL were identified for seven plant architecture traits. The phenotypic variation explained by an individual QTL ranged from 9.56% to 44.57%. In addition, 11 epistatic QTL for fruit branch angle (FBA), plant height (PH), main-stem leaf size (MLS), and fruiting branch internode length (FBI) explained 2.28–15.34% of the phenotypic variation in these traits. The majority of the interactions (60%) occurred between markers linked to QTL influencing the same traits. The QTL detected in this study are expected to be valuable in future breeding programs to develop cultivars exhibiting desirable cotton architecture.     

海岛棉产量和早熟性相关性状的QTLs定位

对海岛棉产量和早熟性状进行QTL初步定位,为分子标记辅助育种提供依据。利用5200多对SSR引物筛选海岛棉品种新海3号和Giza82间的多态性引物,获得107对。以多态性引物检测新海3号×Giza82的190个F2:3家系,获得120个多态性位点。利用JoinMap3.0分析软件构建了一个包含22个连锁群,74个标记,标记间平均距离12.06 cM,全长893 cM,覆盖海岛棉基因组20.12%的分子标记遗传连锁图谱。采用复合区间作图法检测到21个与海岛棉产量性状和早熟性状有关的QTL,其中早熟性状检测到12个QTL,分别位于1、3、5、6、11、17、22共7个连锁群上;产量性状检测到9个QTL,分别位于1、4、5、6、7、16、22共7个连锁群上。研究结果为海岛棉产量性状和早熟性状的分子设计育种提供了有用的信息。     

Quantitative trait loci mapping for yield and its components by using two immortalized populations of a heterotic hybrid in Gossypium hirsutum L.

Quantitative trait loci (QTL) mapping provides a powerful tool for unraveling the genetic basis of yield and yield components as well as heterosis in upland cotton. In this research, a molecular linkage map of Xiangzamian 2 (Gossypium hirsutum L.)-derived recombinant inbred lines (RILs) was reconstructed based on increased expressed sequence tag–simple sequence repeat markers. Both the RILs and immortalized F2s (IF2) developed through intermating between RILs were grown under multiple environments. Yield and yield components including seed-cotton yield, lint yield, bolls/plant, boll weight, lint percentage, seed index, lint index and fruit branch number were measured and their QTL were repeatedly identified across environments by the composite interval mapping (CIM) method. From a total of 111 non-redundant QTL, 23 were detected in both two populations. In the meantime, multi-marker joint analyses showed that 16 of these QTL had significant environmental interaction. QTL for correlated traits tended to be collocated and most of the QTL for seed-cotton yield and lint yield were associated with QTL for at least one yield component, consistent with the results observed in correlation analyses. For many QTL with significant additive effects, positive alleles from CRI12, the inferior parent with lower yield performance, were associated with trait improvement. Trait performance of IF2s and the large number of QTL with positive dominant effects implied that dominance plays an important role in the genetic basis of heterosis in Xiangzamian 2 and that non-additive inheritance is also an important genetic mode for lint percentage in the population. These QTL can provide the bases for marker-assisted breeding programs of upland cotton.     

Identification of trait-improving quantitative trait loci alleles from a wild rice relative,Oryza rufipogon.

Wild species are valued as a unique source of genetic variation, but they have rarely been used for the genetic improvement of quantitative traits. To identify trait-improving quantitative trait loci (QTL) alleles from exotic species, an accession of Oryza rufipogon, a relative of cultivated rice, was chosen on the basis of a genetic diversity study. An interspecific BC2 testcross population (V20A/O. rufipogon//V20B///V20B////Ce64) consisting of 300 families was evaluated for 12 agronomically important quantitative traits. The O. rufipogon accession was phenotypically inferior for all 12 traits. However, transgressive segregants that outperformed the original elite hybrid variety, V20A/Ce64, were observed for all traits examined. A set of 122 RFLP and microsatellite markers was used to identify QTL. A total of 68 significant QTL were identified, and of these, 35 (51%) had beneficial alleles derived from the phenotypically inferior O. rufipogon parent. Nineteen (54%) of these beneficial QTL alleles were free of deleterious effects on other characters. O. rufipogon alleles at two QTL on chromosomes 1 and 2 were associated with an 18 and 17% increase in grain yield per plant, respectively, without delaying maturity or increasing plant height. This discovery suggests that the innovative use of molecular maps and markers can alter the way geneticists utilize wild and exotic germplasm.     

Heterosis for biomass-related traits in Arabidopsis investigated by quantitative trait loci analysis of the triple testcross design with recombinant inbred lines

Arabidopsis thaliana has emerged as a leading model species in plant genetics and functional genomics including research on the genetic causes of heterosis. We applied a triple testcross (TTC) design and a novel biometrical approach to identify and characterize quantitative trait loci (QTL) for heterosis of five biomass-related traits by (i) estimating the number, genomic positions, and genetic effects of heterotic QTL, (ii) characterizing their mode of gene action, and (iii) testing for presence of epistatic effects by a genomewide scan and marker x marker interactions. In total, 234 recombinant inbred lines (RILs) of Arabidopsis hybrid C24 x Col-0 were crossed to both parental lines and their F1 and analyzed with 110 single-nucleotide polymorphism (SNP) markers. QTL analyses were conducted using linear transformations Z1, Z2, and Z3 calculated from the adjusted entry means of TTC progenies. With Z1, we detected 12 QTL displaying augmented additive effects. With Z2, we mapped six QTL for augmented dominance effects. A one-dimensional genome scan with Z3 revealed two genomic regions with significantly negative dominance x additive epistatic effects. Two-way analyses of variance between marker pairs revealed nine digenic epistatic interactions: six reflecting dominance x dominance effects with variable sign and three reflecting additive x additive effects with positive sign. We conclude that heterosis for biomass-related traits in Arabidopsis has a polygenic basis with overdominance and/or epistasis being presumably the main types of gene action.     

Mapping single-locus and epistatic quantitative trait loci for plant architectural traits in chrysanthemum

Plant architecture is important for chrysanthemum cultivation and breeding. To determine the genetic basis of plant architectural traits in chrysanthemum, a population of 142 F1 plants derived from a cross between the creeping ground-cover chrysanthemum cultivar Yuhualuoying and the erect potted cultivar Aoyunhanxiao was used to detect quantitative trait loci (QTL) associated with plant height, plant width, inter-node length and flower neck length. The broad-sense heritability h _B ² for the four plant architectural traits ranged from 0.33 to 0.83, and transgressive segregation was observed. Single-locus QTL analysis revealed a total of five QTL, accounting for 6.0?C16.1% of the phenotypic variation. Additionally, 11 pairs of epistatic QTL were identified, explaining 3.5?C14.5% of the phenotypic variations. The majority of the interactions detected occurred between background loci. These results indicate that both additive and epistatic effects contribute to phenotypic variation in the plant architecture of chrysanthemum. It is expected that the identified markers associated with the additive QTL and epistatic QTL detected in this study will be of importance in future breeding programs to develop chrysanthemum cultivars exhibiting desirable plant architecture.     

Comparative genetic analysis of quantitative traits in sunflower (Helianthus annuus L.). 2. Characterisation of QTL involved in developmental and agronomic traits

Seed weight and oil content are important properties of cultivated sunflower under complex genetic and environmental control, and associated with morphological and developmental characteristics such as plant height or flowering dates. Using a genetic map with 290 markers for a cross between two inbred sunflower lines and 2 years of observations on F3 families, QTL controlling seed weight, oil content, plant height, plant lodging, flowering dates, maturity dates and delay from flowering to maturity were detected. QTL detected were compared between the F2 and F3 generations and between the 2 years of testing for the F3 families in 1997 and 1999. Some of the QTL controlling seed weight overlapped with those controlling oil content. Several other co-localisations of QTL controlling developmental or morphological characteristics were observed and the relationships between the traits were also shown by correlation analyses. The relationships between all these traits and with resistance to Sclerotinia sclerotiorum and Diaporthe helianthi are discussed.     

QTL analysis of intraspecific differences between two Silene vulgaris ecotypes

BACKGROUND AND AIMS: Serpentine soils provide a highly selective substrate for plant colonization and growth and represent an ideal system for studying the evolution of plant-ecotypes. In the present study the aim was to identify the genetic architecture of morphological traits distinguishing serpentine and non-serpentine ecotypes of Silene vulgaris. METHODS: Using an F(2) mapping population derived from an intraspecific cross between a serpentine and a non-serpentine ecotype of S. vulgaris, the genetic architecture of 12 morphological traits was explored using a quantitative trait locus (QTL) analysis. KEY RESULTS: The QTL analysis identified a total of 49 QTLs, of which 24 were classified as major QTLs. The mean number of QTLs per trait category was found to correspond well with numbers reported in the literature for similar crosses. Clustering of QTLs for different traits was found on several linkage groups. CONCLUSIONS: Morphological traits that differentiate the two ecotypes are strongly correlated, presumably as a consequence of the joint effects of extensive linkage of QTLs for different traits and directional selection. The signature of consistent directional selection was found for leaf and shoot trait divergence. Intraspecific ecotype differences in S. vulgaris were found to be distributed across the entire genome. The study shows that QTL analyses on non-model organisms can provide novel insights into the genetic basis of plant diversification.