QTL mapping of yield and fiber traits based on a four-way cross population in <Emphasis Type="Italic">Gossypium hirsutum</Emphasis> L.

Four-way cross (4WC) involving four different inbred lines frequently appears in the cotton breeding programs. However, linkage analysis and quantitative trait loci (QTL) mapping with molecular markers in cotton has largely been applied to populations derived from a cross between two inbred lines, and few results of QTL dissection were conducted in a 4WC population. In this study, an attempt was made to construct a linkage map and identify QTL for yield and fiber quality traits in 4WC derived from four different inbred lines in Gossypium hirsutum L. A linkage map was constructed with 285 SSR loci and one morphological locus, covering 2113.3 cM, approximately 42% of the total recombination length of the cotton genome. A total of 31 QTL with 5.1–25.8% of the total phenotypic variance explained were detected. Twenty-four common QTL across environments showed high stability, and six QTL were environment-specific. Several genomic segments affecting multiple traits were identified. The advantage of QTL mapping using a 4WC were discussed. This study presents the first example of QTL mapping using a 4WC population in upland cotton. The results presented here will enhance the understanding of the genetic basis of yield and fiber quality traits and enable further marker-assisted selection in cultivar populations in upland cotton.     

Genetic and QTL analysis of maize tassel and ear inflorescence architecture

Maize (Zea mays L.) ear inflorescence architecture is directly relevant to grain yield components, and tassel architecture is relevant to hybrid seed production. The objectives of this study were to (1) determine heritabilities and correlations of a comprehensive set of tassel and ear inflorescence architecture traits in a set of (Illinois Low Protein×B73) B73 S₁ families, (2) identify chromosomal positions of QTL affecting tassel and ear architecture, and (3) identify possible candidate genes associated with these QTL. For tassel traits, the number of detected QTL ranged from one to five, and explained between 6.5 and 35.9% of phenotypic variation. For ear traits, the number of detected QTL ranged from one to nine and phenotypic variation explained by those QTL varied between 7.9 and 53.0%. We detected QTL for tassel architecture traits that required calculation of ratios from measured traits. Some of these calculated traits QTL were detected in regions that did not show QTL for the measured traits, suggesting that calculation of ratios may reveal developmentally relevant patterns of tassel architecture. We detected a QTL on chromosome 7 for tassel branch number near the gene ramosa1 (ra1), which is known to control tassel branch number, making ra1 a candidate gene for tassel branch number. We detected QTL for several traits on chromosomes 6, 8, and 9, where no inflorescence architecture genes have been mapped, thus providing initial information towards new gene discovery for control of inflorescence architecture.     

Quantitative trait loci analysis of phenotypic traits and principal components of maize tassel inflorescence architecture

Maize tassel inflorescence architecture is relevant to efficient production of F₁ seed and yield performance of F₁ hybrids. The objectives of this study were to identify genetic relationships among seven measured tassel inflorescence architecture traits and six calculated traits in a maize backcross population derived from two lines with differing tassel architectures, and identify Quantitative Trait Loci (QTL) involved in the inheritance of those tassel inflorescence architecture traits. A Principal Component (PC) analysis was performed to examine relationships among correlated traits. Traits with high loadings for PC1 were branch number and branch number density, for PC2 were spikelet density on central spike and primary branch, and for PC3 were lengths of tassel and central spike. We detected 45 QTL for individual architecture traits and eight QTL for the three PCs. For control of inflorescence architecture, important QTL were found in bins 7.02 and 9.02. The interval phi034—ramosa1 (ral) in bin 7.02 was associated with six individual architecture trait QTL and explained the largest amount of phenotypic variation (17.3%) for PC1. Interval bnlg344–phi027 in bin 9.02 explained the largest amount of phenotypic variation (14.6%) for PC2. Inflorescence architecture QTL were detected in regions with candidate genes fasciated ear2, thick tassel dwarf1, and ral. However, the vast majority of QTL mapped to regions without known candidate genes, indicating positional cloning efforts will be necessary to identify these genes.     

Genetic mapping and quantitative trait locus analysis of fiber quality traits using a three-parent composite population in upland cotton (Gossypium hirsutum L.)

Composite cross populations (CP) developed from three or more cultivars/lines are frequently used to improve agronomic and economic traits in crop cultivar development programs. Employing CP in linkage map construction and quantitative trait locus (QTL) mapping may increase the marker density of upland cotton (Gossypium hirsutum L.) genetic maps, exploit more adequate gene resources and facilitate marker-assisted selection (MAS). To construct a relatively high-density map and identify QTL associated with fiber quality traits in upland cotton, three elite upland cultivars/lines, Yumian 1, CRI 35 and 7,235, were used to obtain the segregating population, Yumian 1/CRI 35//Yumian 1/7,235. A genetic map containing 978 simple sequence repeat (SSR) loci and 69 linkage groups was constructed; the map spanned 4,184.4 cM, covering approximately 94.1% of the entire tetraploid cotton genome. A total of 63 QTL were detected, explaining 8.1–55.8% of the total phenotypic variance: 11 QTL for fiber elongation, 16 QTL for fiber length, 9 QTL for fiber micronaire reading, 10 QTL for fiber strength and 17 QTL for fiber length uniformity. The genetic map and QTL detected for fiber quality traits are promising for further breeding programs of upland cotton with improved fiber quality.     

Mapping single-locus and epistatic quantitative trait loci for plant architectural traits in chrysanthemum

Plant architecture is important for chrysanthemum cultivation and breeding. To determine the genetic basis of plant architectural traits in chrysanthemum, a population of 142 F1 plants derived from a cross between the creeping ground-cover chrysanthemum cultivar Yuhualuoying and the erect potted cultivar Aoyunhanxiao was used to detect quantitative trait loci (QTL) associated with plant height, plant width, inter-node length and flower neck length. The broad-sense heritability h _B ² for the four plant architectural traits ranged from 0.33 to 0.83, and transgressive segregation was observed. Single-locus QTL analysis revealed a total of five QTL, accounting for 6.0?C16.1% of the phenotypic variation. Additionally, 11 pairs of epistatic QTL were identified, explaining 3.5?C14.5% of the phenotypic variations. The majority of the interactions detected occurred between background loci. These results indicate that both additive and epistatic effects contribute to phenotypic variation in the plant architecture of chrysanthemum. It is expected that the identified markers associated with the additive QTL and epistatic QTL detected in this study will be of importance in future breeding programs to develop chrysanthemum cultivars exhibiting desirable plant architecture.     

Population structure and genetic basis of the agronomic traits of upland cotton in China revealed by a genome‐wide association study using high‐density SNPs

Gossypium hirsutum L. represents the largest source of textile fibre, and China is one of the largest cotton‐producing and cotton‐consuming countries in the world. To investigate the genetic architecture of the agronomic traits of upland cotton in China, a diverse and nationwide population containing 503 G. hirsutum accessions was collected for a genome‐wide association study (GWAS) on 16 agronomic traits. The accessions were planted in four places from 2012 to 2013 for phenotyping. The CottonSNP63K array and a published high‐density map based on this array were used for genotyping. The 503 G. hirsutum accessions were divided into three subpopulations based on 11 975 quantified polymorphic single‐nucleotide polymorphisms (SNPs). By comparing the genetic structure and phenotypic variation among three genetic subpopulations, seven geographic distributions and four breeding periods, we found that geographic distribution and breeding period were not the determinants of genetic structure. In addition, no obvious phenotypic differentiations were found among the three subpopulations, even though they had different genetic backgrounds. A total of 324 SNPs and 160 candidate quantitative trait loci (QTL) regions were identified as significantly associated with the 16 agronomic traits. A network was established for multieffects in QTLs and interassociations among traits. Thirty‐eight associated regions had pleiotropic effects controlling more than one trait. One candidate gene, Gh_D08G2376, was speculated to control the lint percentage (LP). This GWAS is the first report using high‐resolution SNPs in upland cotton in China to comprehensively investigate agronomic traits, and it provides a fundamental resource for cotton genetic research and breeding.     

A BIL Population Derived from G. hirsutum and G. barbadense Provides a Resource for Cotton Genetics and Breeding

To provide a resource for cotton genetics and breeding, an interspecific hybridization between Gossypium hirsutum cv. Emian22 and G. barbadense acc. 3–79 was made. A population of 54 BILs (backcross inbred lines, BC₁F₈) was developed with the aim of transferring G. barbadense genes into G. hirsutum in order to genetically analyze these genes’ function in a G. hirsutum background and create new germplasms for breeding. Preliminary investigation of the morphological traits showed that the BILs had diverse variations in plant architecture, seed size, and fuzz color; the related traits of yield and fiber quality evaluated in 4 environments also showed abundant phenotypic variation. In order to explore the molecular diversity of the BIL population, 446 SSR markers selected at an average genetic distance of 10 cM from our interspecific linkage map were used to genotype the BIL population. A total of 393 polymorphic loci accounting for 84.4% MAF (major allele frequency) > 0.05 and 922 allele loci were detected, and the Shannon diversity index (I) was 0.417 per locus. The average introgression segment length was 16.24 cM, and an average of 29.53 segments were introgressed in each BIL line with an average background recovery of 79.8%. QTL mapping revealed 58 QTL associated with fiber quality and yield traits, and 47 favored alleles derived from the donor parent were discovered. This study demonstrated that the interspecific BIL population was enriched with much phenotypic and molecular variation which could be a resource for cotton genetics and breeding.     

Novel pleiotropic loci controlling panicle architecture across environments in japonica rice （Oryza sativa L.）

To identify quantitative trait loci (QTLs) controlling panicle architecture in japonica rice, a genetic map was constructed based on simple sequence repeat (SSR) markers and 254 recombinant inbred lines (RILs) derived from a cross between cultivars Xiushui 79 and C Bao. Seven panicle traits were investigated under three environments. Single marker analysis indicated that a total of 27 SSR markers were highly associated with panicle traits in all the three environments. Percentage of phenotypic variation explained by single locus varied from 2% to 35%. Based on the mixed linear model, a total of 40 additive QTLs for seven panicle traits were detected by composite interval mapping, explaining 1.2%-35% of phenotypic variation. Among the 9 QTLs with more than 10% of explained phenotypic variation, two QTLs were for the number of primary branches per panicle (NPB), two for panicle length (PL), two for spikelet density (SD), one for the number of secondary branches per panicle (NSB), one for secondary branch distribution density (SBD), and one for the number of spikelets per panicle (NS), respectively. qPLSD-9-1 and qPLSD-9-2 were novel pleiotropic loci, showing effects on PL and SD simultaneously. qPLSD-9-1 explained 34.7% of the phenotypic variation for PL and 25.4% of the phenotypic variation for SD, respec- tively. qPLSD-9-2 explained 34.9% and 24.4% of the phenotypic variation for PL and SD, respectively. The C Bao alleles at the both QTLs showed positive effects on PL, and the Xiushui 79 alleles at the both QTLs showed positive effects on SD. Genetic variation of panicle traits are mainly attributed to additive effects. QTL × environment interactions were not significant for additive QTLs and additive × additive QTL pairs.     

QTL Mapping for Plant Architecture Traits in Upland Cotton Using RILs and SSR Markers

Xiangzamian 2 (XZM2) is the most widely cultivated cotton hybrid in China. By crossing two parents Zhongmiansuo 12 and 8891 and upon subsequent selfings, we got F₈ and F₉ populations having 180 recombinant inbred lines. Ten plant architecture traits were investigated in two years with this population. A genetic map was constructed mainly with SSR markers. Quantitative trait loci (QTL) conditioning plant architecture traits were determined at the single-locus and double-locus levels. The results showed that epistastic effects as well as additive effects of QTL played an important role as the genetic basis of cotton plant architecture. The QTL detected in our research might provide new information on improving plant architecture traits. The polymorphism of molecular markers between ZMS12 and 8891 were quite limited, while significant differences between their phenotypes were found and the hybrid XZM2 expressed high heterosis in yield. All these could be partly explained by the effect of epistatic QTL.     

Genetic dissection of maize seedling root system architecture traits using an ultra-high density bin-map and a recombinant inbred line population

Maize(Zea mays) root system architecture(RSA)mediates the key functions of plant anchorage and acquisition of nutrients and water. In this study,a set of 204 recombinant inbred lines(RILs) was derived from the widely adapted Chinese hybrid ZD958(Zheng58 Chang7-2),genotyped by sequencing(GBS) and evaluated as seedlings for 24 RSA related traits divided into primary,seminal and total root classes. Signi ficant differences between the means of the parental phenotypes were detected for 18 traits,and extensive transgressive segregation in the RIL population was observed for all traits. Moderate to strong relationships among the traits were discovered. A total of 62 quantitative trait loci(QTL) were identi fied that individually explained from1.6% to 11.6%(total root dry weight/total seedling shoot dry weight) of the phenotypic variation. Eighteen,24 and 20 QTL were identi fied for primary,seminal and total root classes of traits,respectively. We found hotspots of 5,3,4 and 12 QTL in maize chromosome bins 2.06,3.02-03,9.02-04,and 9.05-06,respectively,implicating the presence of root gene clusters or pleiotropic effects. These results characterized the phenotypic variation and genetic architecture of seedling RSA in a population derived from a successful maize hybrid.     

大豆遗传图谱的构建和若干农艺性状的QTL定位分析

大豆许多重要农艺性状都是由微效多基因控制的数量性状,对这些数量性状进行QTL定位是大豆数量性状遗传研究领域的一个重要内容.本研究利用栽培大豆科新3号为父本、中黄20为母本杂交得到含192个单株的F2分离群体,构建了含122 个SSR标记、覆盖1719.6cM、由33个连锁群组成的连锁遗传图谱.利用复合区间作图法,对该群体的株高、主茎节数、单株粒重和蛋白质含量等农艺性状的调查数据进行QTL分析,共找到两个株高QTL,贡献率分别为9.15%和6.08%;两个主茎节数QTL,贡献率分别为10. 1%和8.6%;一个蛋白质含量QTL,贡献率为9.8%;一个单株粒重QTL,贡献率为11.4% .通过遗传作图共找到与所定位的4个农艺性状QTL连锁的6个SSR标记,这些标记可以应用于大豆种质资源的分子标记辅助选择,从而为大豆分子标记辅助育种提供理论依据.     

利用重组自交系和SSR标记进行陆地棉株型QTL的鉴定和定位

通过中棉所12与8891的杂交及多代自交,获得由180个家系构成的重组自交系F8、F9群体。重组自交系群体、两亲本及F1于2002、2003两年种植;对株型性状进行了研究,两年共调查了10个株型形状。利用该重组自交系群体,采用SSR为主体的分子标记构建了遗传连锁图,并对株型性状进行了单位点和双位点水平的QTL定位。结果表明,QTL加性效应和上位性互作效应作为棉花重组自交系株型性状的遗传基础起着重要作用;中棉所12与8891间多态性位点偏少,而表型差异较大且其杂交种湘杂棉二号有很强的杂种优势,QTL互作可部分解释这一现象：结合对产量品质性状的研究结果,认为上位性可能是湘杂棉二号杂种优势的重要遗传基础。     

Quantitative trait loci for yield components in oil palm (Elaeis guineensis Jacq.)

The development of an oil palm RFLP marker map has enabled marker-based QTL mapping studies to be undertaken. Information from 153 RFLP markers was used in combination with phenotypic data from an F₂ population to estimate the position and effects of quantitative trait loci (QTLs) for traits including yield of fruit and its components and measures of vegetative growth. The mapping population consisted of 84 palms segregating for the major gene influencing shell thickness. Marker data were analysed to produce a linkage map consisting of 22 linkage groups. The QTL mapping analysis was carried out by interval mapping and single-marker analysis for the unlinked markers; significance thresholds were generated by permutation. Using both single-marker and interval-mapping analysis significant marker associated QTL effects were found for 11 of the 13 traits analysed. The results of interval-mapping analysis of fruit weight, petiole cross section and rachis length, and ratios of shell:fruit, mesocarp:fruit and kernel:fruit indicated significant (P<0.05) QTLs at the genome-wide threshold. The putative QTLs were associated with between 8.2% and 44.0% of the phenotypic variation, with an average of 27% for the single-marker analysis and 19% for the interval-mapping analysis. The higher percentage of phenotypic variation explained in the single-marker analysis, when compared to the interval-mapping analysis, is likely to be due to the lower stringency associated with the single-marker analysis. Large dominance deviations were associated with a sizeable proportion of the putative QTLs. The ultimate objective of mapping QTLs in commercial populations is to utilise novel breeding strategies such as marker-assisted selection (MAS). The potential impact of MAS in oil palm breeding programmes is discussed. Received: 26 June 2000 / Accepted: 24 October 2000     

Molecular-marker analysis of quantitative traits for growth and development in juvenile apple trees

Random amplified polymorphic DNAs (RAPDs) were used in combination with a double pseudo-testcross mapping strategy to estimate the position and effects of quantitative trait loci (QTLs) for traits influencing juvenile tree growth and development in two apple cultivars. The mapping population consisted of 172 F₁ trees from a cross between the columnar mutant ‘Wijcik McIntosh’ and a standard form disease-resistant selection NY 75441-58. Significant associations were found between markers and height increment, internode number, internode length, base diameter increment, base diameter after 9 years of growth, branch number, and leaf break. The number of genomic regions associated with each trait varied from one to eight. The amount of variation explained by linear regression on individual marker loci (R²) ranged from 3.9 to 24.3%, with an average of 7%. Multiple regression using markers for each putative QTL explained from 6.6 to 41.6% of the phenotypic variation, with an average value of 24.3%. A large number of traits had significant variation associated with the map position of the dominant columnar gene, Co. QTL stability over years was estimated by comparing the locations of putative QTLs for traits measured in multiple years. The majority of genomic regions were associated with a trait in only a single year, although regions associated with a trait in more than 1 year were also detected. The limitations of dominant markers and an outbred mapping pedigree for QTL analysis are discussed. Received: 27 August 1997 / Accepted: 10 February 1998     

Identification of quantitative trait loci controlling winter hardiness in an annual × perennial ryegrass interspecific hybrid population

Winter hardiness is a quantitative trait and the lack of it limits geographic distribution of ryegrass. Improving winter hardiness is an important breeding goal in ryegrass breeding programs. An understanding of the genetic basis for the component traits of winter hardiness would allow more efficient selection. A three-generation interspecific population of an annual × perennial ryegrass consisting of 152 progenies was used to map quantitative trait loci (QTL) that control winter hardiness-related traits including fall growth (FG), freezing tolerance (FT), and winter survival (WS) over 2 years. A total of 39 QTL were identified for the three traits from both the female parental (MFA) and the male parental (MFB) maps, of which 13 were for FG, 6 for FT, and 20 for WS. The proportion of phenotypic variation explained by individual QTL ranged from 10.4 to 22.1%. Both FG and FT were positively correlated with WS. Common QTL were detected between FG, FT, and WS. The QTL associated with WS on linkage groups (LGs) 4 and 5, and the QTL for FT on LG 5 were consistently identified over years and maps. These consistent QTL might serve as potential tools for marker-assisted selection to improve ryegrass winter hardiness.     

QTL mapping in A-genome diploid Asiatic cotton and their congruence analysis with AD-genome tetraploid cotton in genus Gossypium

Asiatic cotton(Gossypium arboreum L.) is an Old World cultivated cotton species.The sinense race was planted extensively in China.Due to the advances in spinning technology during the last century,the species was replaced by the New World allotetraploid cotton G.hirsutum L.Gossypium arboreum is still grown in India and Pakistan and also used as an elite in current cotton breeding programs.In addition,G.arboreum serves as a model for genomic research in Gossypium.In the present study,we generated an A-genome diploid cotton intraspecific genetic map including 264 SSR loci with three morphological markers mapped to 1 3 linkage groups.The map spans 2,508.71 cM with an average distance of 9.4 cM between adjacent loci.A population containing 1 76 F2:3 families was used to perform quantitative trait loci(QTL)mapping for 17 phenotypes using Multiple QTL Model(MQM)of MapQTL ver 5.0.Overall,108 QTLs were detected on 13 chromosomes.Thirty-one QTLs for yield and its components were detected in the F2 population.Forty-one QTLs for yield and its components were detected in the F2:3 families with a total of 43 QTLs for fiber qualities.Two QTLs for seed cotton weight/plant and lint index and three QTLs for seed index were consistently detected both in F2 and F2:3.Most QTLs for fiber qualities and yields were located at the same interval or neighboring intervals.These results indicated that the negative correlation between fiber qualities and yield traits may result from either pleiotropic effect of one gene or linkage effects of multiple closely linked genes.     

Genomic dissection of variation in clutch size and egg mass in a wild great tit (Parus major) population

Clutch size and egg mass are life history traits that have been extensively studied in wild bird populations, as life history theory predicts a negative trade‐off between them, either at the phenotypic or at the genetic level. Here, we analyse the genomic architecture of these heritable traits in a wild great tit (Parus major) population, using three marker‐based approaches – chromosome partitioning, quantitative trait locus (QTL) mapping and a genome‐wide association study (GWAS). The variance explained by each great tit chromosome scales with predicted chromosome size, no location in the genome contains genome‐wide significant QTL, and no individual SNPs are associated with a large proportion of phenotypic variation, all of which may suggest that variation in both traits is due to many loci of small effect, located across the genome. There is no evidence that any regions of the genome contribute significantly to both traits, which combined with a small, nonsignificant negative genetic covariance between the traits, suggests the absence of genetic constraints on the independent evolution of these traits. Our findings support the hypothesis that variation in life history traits in natural populations is likely to be determined by many loci of small effect spread throughout the genome, which are subject to continued input of variation by mutation and migration, although we cannot exclude the possibility of an additional input of major effect genes influencing either trait.     

Construction of a high-density genetic linkage map and QTL analysis of morphological traits in an F1 Malusdomestica × Malus baccata hybrid

Apple is considered the most commonly grown fruit crop in temperate regions that brings great economic profits to fruit growers. Dwarfing rootstocks have been extensively used in apple breeding as well as commercial orchards, but the molecular and genetic basis of scion dwarfing and other morphological traits induced by them is still unclear. At present, we report a genetic map of Malusdomestica × Malus baccata with high density. The F₁ population was sequenced by a specific length amplified fragment (SLAF). In the genetic map, 5064 SLAF markers spanning 17 linkage groups (LG) were included. Dwarf-related and other phenotypic traits of the scion were evaluated over a 3-year growth period. Based on quantitative trait loci (QTL) evaluation of plant height and trunk diameter, two QTL clusters were found on LG 11, which exhibited remarkable influences on dwarfing of the scion. In this analysis, QTL DW2, which was previously reported as a locus that controls dwarfing, was confirmed. Moreover, three novel QTLs for total flower number and branching flower number were detected on LG2 and LG4, exhibited the phenotypic variation that has been explained by QTL ranging from 8.80% to 34.80%. The findings of the present study are helpful to find scion dwarfing and other phenotypes induced by rootstock in the apple.Supplementary InformationThe online version contains supplementary material available at 10.1007/s12298-021-01069-0.     

Using QTL mapping to investigate the relationships between abiotic stress tolerance (drought and salinity) and agronomic and physiological traits

Background

Drought and salinity are two major abiotic stresses that severely limit barley production worldwide. Physiological and genetic complexity of these tolerance traits has significantly slowed the progress of developing stress-tolerant cultivars. Marker-assisted selection (MAS) may potentially overcome this problem. In the current research, seventy two double haploid (DH) lines from a cross between TX9425 (a Chinese landrace variety with superior drought and salinity tolerance) and a sensitive variety, Franklin were used to identify quantitative trait loci (QTL) for drought and salinity tolerance, based on a range of developmental and physiological traits.

Results

Two QTL for drought tolerance (leaf wilting under drought stress) and one QTL for salinity tolerance (plant survival under salt stress) were identified from this population. The QTL on 2H for drought tolerance determined 42% of phenotypic variation, based on three independent experiments. This QTL was closely linked with a gene controlling ear emergency. The QTL on 5H for drought tolerance was less affected by agronomic traits and can be effectively used in breeding programs. A candidate gene for this QTL on 5H was identified based on the draft barley genome sequence. The QTL for proline accumulation, under both drought and salinity stresses, were located on different positions to those for drought and salinity tolerance, indicating no relationship with plant tolerance to either of these stresses.

Conclusions

Using QTL mapping, the relationships between QTL for agronomic and physiological traits and plant drought and salinity tolerance were studied. A new QTL for drought tolerance which was not linked to any of the studied traits was identified. This QTL can be effectively used in breeding programs. It was also shown that proline accumulation under stresses was not necessarily linked with drought or salinity tolerance based on methods of phenotyping used in this experiment. The use of proline content in breeding programs can also be limited by the accuracy of phenotyping.

Electronic supplementary material

The online version of this article (doi:10.1186/s12864-015-1243-8) contains supplementary material, which is available to authorized users.     

Mapping species differences for adventitious rooting in a <Emphasis Type="Italic">Corymbia torelliana</Emphasis> × <Emphasis Type="Italic">Corymbia citriodora</Emphasis> subspecies <Emphasis Type="Italic">variegata</Emphasis> hybrid

Quantitative trait loci (QTL) detection was carried out for adventitious rooting and associated propagation traits in a second-generation outbred Corymbia torelliana × Corymbia citriodora subspecies variegata hybrid family (n = 186). The parental species of this cross are divergent in their capacity to develop roots adventitiously on stem cuttings and their propensity to form lignotubers. For the ten traits studied, there was one or two QTL detected, with some QTL explaining large amounts of phenotypic variation (e.g. 66% for one QTL for percentage rooting), suggesting that major effects influence rooting in this cross. Collocation of QTL for many strongly genetically correlated rooting traits to a single region on linkage group 12 suggested pleiotropy. A three locus model was most parsimonious for linkage group 12, however, as differences in QTL position and lower genetic correlations suggested separate loci for each of the traits of shoot production and root initiation. Species differences were thought to be the major source of phenotypic variation for some rooting rate and root quality traits because of the major QTL effects and up to 59-fold larger homospecific deviations (attributed to species differences) relative to heterospecific deviations (attributed to standing variation within species) evident at some QTL for these traits. A large homospecific/heterospecific ratio at major QTL suggested that the gene action evident in one cross may be indicative of gene action more broadly in hybrids between these species for some traits.