Comparison of biological removal via nitrite with real-time control using aerobic granular sludge and flocculent activated sludge

The process of nitrification–denitrification via nitrite for nitrogen removal under real-time control mode was tested in two laboratory-scale sequencing batch reactors (SBRs) with flocculent activated sludge (R1) and aerobic granular sludge (R2) to compare operational performance and real-time control strategies. The results showed that the average ammonia nitrogen, total inorganic nitrogen (TIN), and chemical oxygen demand (COD) removal during aeration phase were 97.6%, 57.0%, and 90.1% in R2 compared with 98.6%, 48.7%, and 88.1% in R1. The TIN removed in both SBRs was partially due to the presence of simultaneous nitrification–denitrification via nitrite, especially in R2. The specific nitrification and denitrification rates in R2 were 0.0416 mgNH₄⁺–N/gSS-min and 0.1889 mgNO_X⁻–N/gSS-min, which were 1.48 times and 1.35 times that of R1. The higher rates for COD removal, nitrification, and denitrification were achieved in R2 than R1 with similar influent quality. Dissolved oxygen (DO), pH, and oxidization reduction potential, corresponding to nutrient variations, were used as diagnostic parameters to control the organic carbon degradation and nitrification–denitrification via nitrite processes in both SBRs. The online control strategy of granular SBR was similar to that of the SBR with flocculent activated sludge. However, a unique U-type pattern on the DO curve in granular SBR was different from SBR with flocculent activated sludge in aerobic phase.     

Anaerobic granule development for removal of pentachlorophenol in an upflow anaerobic sludge blanket (UASB) reactor

The granulation process using synthetic wastewater containing pentachlorophenol (PCP) in four 1.1 l laboratory scale upflow anaerobic sludge blanket (UASB) reactors was studied, and the anaerobic biotransformation of PCP during the granulation process investigated. After 110 days granular sludge was developed and up to 160 and 180 mg/l of PCP was added into the reactors R1 and R2, respectively, when they were inoculated with acclimated anaerobic sludge from an anaerobic digester of a citric acid plant. The inoculum was predominately composed of bacilli and filamentous bacteria. Granulation did not occur in reactors R3 and R4 which were inoculated with acclimated anaerobic sludge from aerobic sludge of the municipal sewage treatment plant which consisted mainly of cocci. Despite similar bacilli in the granule, the filamentous bacteria from reactor R1 were thicker than those of reactor R2. The granular sludge had a maximum diameter of 2.5 and 2.2 mm, and SMA of 1.44 and 1.32 gCOD/gTVS per day for reactors R1 and R2, respectively. Over 98% chemical oxygen demand (COD) removal rate and 99% of PCP removal rate were achieved when reactors R1 and R2 were operated at PCP and COD loading rates of 150 and 7.5 g/l per day, respectively. H₂-producing acetogens were the dominant anaerobes in the granular sludge.     

Effects of ferrous iron on the performance and microbial community in aerobic granular sludge in relation to nutrient removal

Lab‐scale experiments were conducted to investigate the effects of ferrous iron on nutrient removal performance and variations in the microbial community inside aerobic granular sludge for 408 days. Two reactors were simultaneously operated, one without added ferrous iron (SBR1), and one with 10 mg Fe²⁺ L^?1 of added ferrous iron (SBR2). A total of 1 mg Fe²⁺ L^?1 of added ferrous iron was applied to SBR1 starting from the 191st day to observe the resulting variations in the nutrient removal performance and the microbial community. The results show that ammonia‐oxidizing bacteria (AOB) could not oxidize ammonia due to a lack of iron compounds, but they could survive in the aerobic granular sludge. Limited ferrous iron addition encouraged nitrification. Enhanced biological phosphorus removal (EBPR) from both reactors could not be maintained regardless of the amount of ferrous iron that was applied. EBPR was established in both reactors when the concentration of mixed liquor suspended solid (MLSS) and the percentage of Accumulibacteria increased. A total of 10 mg Fe²⁺ L^?1 of added ferrous iron had a relatively adverse effect on the growth of AOB species compared to 1 mg Fe²⁺ L^?1 of added ferrous iron, but it encouraged the growth of Nitrospira sp. and Accumulibacteria, which requires further study. It could be said that the compact and stable structure of aerobic granular sludge preserved AOB and NOB from Fe‐deficient conditions, and wash‐out during the disintegration period. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:716–725, 2017     

Enhanced aerobic granulation and nitrogen removal by the addition of zeolite powder in a sequencing batch reactor

The aim of this study was to evaluate the impact of zeolite powders on feasibility of rapid aerobic granulation in the column-type sequencing batch reactors. After 90 days' operation, aerobic granular sludge was formed in both reactors by altering influent chemical oxygen demand/nitrogen (COD/N) ratios. R1 with zeolite powders had better removal capabilities of COD and total nitrogen than R2, which was without zeolite powders. Mixed liquor volatile suspended solid concentrations of the two reactors were 7.36 and 5.45 g/L, while sludge volume index (SVI₃₀) values were 34.9 and 47.9 mg/L, respectively. The mean diameters of aerobic granular sludge in the above two reactors were 2.5 and 1.5 mm, respectively. Both reactors achieved the largest simultaneous nitrification and denitrification (SND) efficiency at an influent COD/N ratio of 8; however, R1 exhibited more excellent SND efficiency than R2. The obtained results could provide a novel technique for rapid aerobic granulation and N removal simultaneously, especially when treating nitrogen-rich industrial wastewater.     

Biotransformation of nitrophenols in upflow anaerobic sludge blanket reactors

Four identical bench-scale upflow anaerobic sludge blanket (UASB) reactors, R1, R2, R3 and R4, were used to assess nitrophenols degradation at four different hydraulic retention times (HRT). Reactor R1 was used as control, whereas R2, R3, and R4 were fed with 2-nitrophenol (2-NP), 4-nitrophenol (4-NP), and 2,4-dinitrophenol (2,4-DNP), respectively. The concentration of each nitrophenol was gradually varied from 2 to 30 mg/l during acclimation. After acclimation reactors were operated under steady-state conditions at four different HRTs – 30, 24, 18, and 12 h, to study its effect on the removal of nitrophenols. Overall removal of 2-NP and 4-NP was always more than 99% but 2,4-DNP removal decreased from 96% to 89.7% as HRT was lowered from 30 to 12 h. 2-Aminophenol (2-AP), 4-aminophenol (4-AP) and 2-amino,4-nitrophenol (2-A,4-NP) were found to be the major intermediates during the degradation of 2-NP, 4-NP and 2,4-DNP, respectively. Out of the total input of nitrophenolic concentration (30 mg/l), on molar basis, about 41.2–48.4% of 2-NP, 59.4–68% of 4-NP, 30–26.6% of 2,4-DNP was recovered in the form of their respective amino derivatives at 30–12 h HRT. COD removal was 98–89%, 97–56%, 97–52%, and 94–46% at 30–12 h HRT for R1, R2, R3 and R4, respectively. Average cell growth was observed to be 0.15 g volatile suspended solid (VSS) per g COD consumed. Methanogenic inhibition was observed at lower HRTs (18 and 12 h), however denitrification was always more than 99% with non-detectable level of nitrite. The granules developed inside the reactors were black in color and their average size varied between 1.9 and 2.1 mm.     

Biofilm producing indigenous bacteria isolated from municipal sludge and their nutrient removal ability in moving bed biofilm reactor from the wastewater

In the present study, improved moving bed biofilm reactor (MBBR) was applied to enhance the nutrient removal ability of the municipal wastewater. A total of 18 indigenous bacterial isolates were screened from the sewage sludge sample and nitrate reductase, nitrite reductase and hydroxylamine oxidase was analyzed. The strains Pseudomonas aeruginosa NU1 and Acinetobacter calcoaceticus K12 produced 0.87 ± 0.05 U/mg and 0.52 ± 0.12 U/mg hydroxylamine oxidase, 1.023 ± 0.062 U/mg and 1.29 ± 0.07 U/mg nitrite reductase, and 0.789 ± 0.031 U/mg and 1.07 ± 0.13 U/mg nitrate reductase. Nitrogen and phosphate removal improved by the addition of nutrient sources and achieved > 80% removal rate. pH and temperature of the medium also affected nutrient removal and improved removal was achieved at optimum level (p < 0.05). MBBR was designed with R1 (aerobic), R2 and R3 (anoxic) reactors. MBBR reactors removed acceptable level phosphorus removal properties up to 7.2 ± 3.8%, 42.4 ± 4.6%, and 84.2 ± 13.1% in the R1, R2, R3 and R4 reactors, respectively. Denitrification rate showed linear relationship at increasing concentrations nitrogen content in the reactor and denitrification rate was 1.43 g NO₂-N /m²/day at 1.5 g NO₂-N /m²/day. Dehydrogenase activity was assayed in all reactors and maximum amount was detected in the aerobic biofilm reactor. Based on the present findings, MBBRs and the selected bacterial strains are useful for the degradation domestic wastewater with minimum working area.     

Granulation in anaerobic sludge bed reactors treating food industry wastes

Three parallel laboratory reactors, R1, R2 and R3, received food industry wastewater: R1 unadulterated; R2 supplemented with calcium and phosphate; R3 supplemented with ferric chloride and traces of nickel and cobalt. Reactors were packed with active granular sludge from a large scale pilot reactor treating the same wastewater. Addition of calcium and phosphate was found to be detrimental to the granule formation at naturally established reactor pH = 6·9–7·4 in R2 while iron promoted granulation in R3. Conditions of upflow velocities of 1·5–6 m h⁻¹, rapid increase of loads up to 15 kg COD m⁻³ day⁻¹ and ratios of recycle to raw waste feed of 20:1–80:1 were imposed on all reactors. The granules in R1 and R2 disintegrated, from 70–100 g liter⁻¹ VSS to a flocculant sludge at 1·5–3 g liter⁻¹. In spite of such severe washout, reactors R1 and R2 were able to maintain a steady COD removal of over 90% at a load of 10kg m⁻³ day⁻¹. R3 retained a VSS concentration around 100 g liter⁻¹ and maintained COD removal at over 95%. R3 exhibited a more stable performance and was less vulnerable to the shock treatment to which all reactors were subjected.     

A key cultivation technology for denitrifying granular sludge

Well-formed denitrifying granular sludge with a biomass concentration of 24.8 gVSS L^?1 and a specific nitrate removal rate of 0.19 gNO₃-N gVSS^?1 d^?1 was obtained in an upflow sludge blanket (USB) reactor by cultivating seeded aerobic flocculent sludge for 6–8 weeks. Regularity phenomena exist in the granulation including flotation of flocculent sludge, formation of fine granules, occurrence of channelling, and formation of mature granular sludge. The granulation is similar to crystal growth, that the non-denitrifying bacteria evolve into the carriers (fine granules), on the surface of which denitrifying bacteria proliferate and develop into mature granular sludge.There are several key parameters that must be considered when developing a good denitrifying granular sludge. First, the proper seed sludge must be chosen (VSS/SS at 0.65–0.75, SRT over 25 days) to accelerate the granulation process. Secondly, any floating sludge should be stirred, and the sludge loading rate should be within the range of 0.05–0.15 gNO₃-N gVSS^?1 d^?1 until fine granules emerge. Additionally, spontaneous gas agitation or interval air-blowing should be used to effectively eliminate channelling; Finally, the sludge loading rate should be less than 0.25 gNO₃-N gVSS^?1 d^?1 until dense, mature granular sludge appears. This study could support and promote the full-scale application of denitrifying granular sludge.     

Organics and nitrogen removal and sludge stability in aerobic granular sludge membrane bioreactor

Novel aerobic granular sludge membrane bioreactor (GMBR) was established by combining aerobic granular sludge technology with membrane bioreactor (MBR). GMBR showed good organics removal and simultaneous nitrification and denitrification (SND) performances for synthesized wastewater. When influent total organic carbon (TOC) was 56.8-132.6 mg/L, the TOC removal of GMBR was 84.7-91.9%. When influent ammonia nitrogen was 28.1-38.4 mg/L, the ammonia nitrogen removal was 85.4-99.7%, and the total nitrogen removal was 41.7-78.4%. Moreover, batch experiments of sludge with different particle size demonstrated that: (1) flocculent sludge under aerobic condition almost have no denitrification capacity, (2) SND capacity was caused by the granular sludge, and (3) the denitrification rate and total nitrogen removal efficiency were enhanced with the increased particle size. In addition, study on the sludge morphology stability in GMBR showed that, although some granular sludge larger than 0.9 mm disaggregated at the beginning of operation, the granular sludge was able to maintain the stability of its granular morphology, and at the end of operation, the amount of granular sludge (larger than 0.18 mm) stabilized in GMBR was more than 56-62% of the total sludge concentration. The partial disaggregation of large granules is closely associated with the change of operating mode from sequencing batch reactor (SBR) system to MBR system.     

Treatment of old landfill leachate with high ammonium content using aerobic granular sludge

Background

Aerobic granular sludge has become an attractive alternative to the conventional activated sludge due to its high settling velocity, compact structure, and higher tolerance to toxic substances and adverse conditions. Aerobic granular sludge process has been studied intensively in the treatment of municipal and industrial wastewater. However, information on leachate treatment using aerobic granular sludge is very limited.

Methods

This study investigated the treatment performance of old landfill leachate with different levels of ammonium using two aerobic sequencing batch reactors (SBR): an activated sludge SBR (ASBR) and a granular sludge SBR (GSBR). Aerobic granules were successfully developed using old leachate with low ammonium concentration (136 mg L^?1 NH₄ ⁺-N).

Results

The GSBR obtained a stable chemical oxygen demand (COD) removal of 70% after 15 days of operation; while the ASBR required a start-up of at least 30 days and obtained unstable COD removal varying from 38 to 70%. Ammonium concentration was gradually increased in both reactors. Increasing influent ammonium concentration to 225 mg L^?1 N, the GSBR removed 73 ± 8% of COD; while COD removal of the ASBR was 59 ± 9%. The GSBR was also more efficient than the ASBR for nitrogen removal. The granular sludge could adapt to the increasing concentrations of ammonium, achieving 95 ± 7% removal efficiency at a maximum influent concentration of 465 mg L^?1 N. Ammonium removal of 96 ± 5% was obtained by the ASBR when it was fed with a maximum of 217 mg L^?1 NH₄ ⁺-N. However, the ASBR was partially inhibited by free-ammonia and nitrite accumulation rate increased up to 85%. Free-nitrous acid and the low biodegradability of organic carbon were likely the main factors affecting phosphorus removal.

Conclusion

The results from this research suggested that aerobic granular sludge have advantage over activated sludge in leachate treatment.

     

好氧颗粒污泥对不同底物组成的响应

在序批式间歇反应器（R1、R2和R3）中,采用乙酸钠（R1）、蔗糖（R2）和苯酚（R3）三种不同基质作为碳源,均成功地培养出了好氧颗粒污泥;考察了不同颗粒污泥的理化性质及其对污染物的转化能力。结果表明,R1中颗粒污泥外观呈黄色,其主要的微生物菌群为细菌;R2中颗粒污泥外观呈黑色,内部含有丝状菌;而R3中颗粒污泥表面被大量丝状菌包裹,颗粒污泥呈淡黄色。在进水COD1000mg／L时R1、R2和R3中颗粒污泥比有机物的利用速率大小顺序为R3〉R1〉R2,而COD的去除率顺序却为R2〉R1〉R3。在进水氨氮40mg／L时,R1、R2和R3中氨氮的去除率分别在91％、96％和80％以上。以不同的底物培养出不同的好氧颗粒污泥可以拓展其在有毒化学物质如酚类化合物和高浓度工业废水生物处理中的应用。     

Effects of alternative carbon sources on biological transformation of nitrophenols

The removal of nitrophenols under denitrifying conditions was studied in bench-scale upflow anaerobic sludge blanket (UASB) reactors (R1, R2, R3 and R4) using three different carbon sources. Initially acetate was used as carbon source (substrate) in all the four reactors followed by glucose and methanol. Reactor R1 was kept as control and R2, R3, R4 were fed with 30 mg/l concentration of 2-nitrophenol (2-NP), 4-nitrophenol (4-NP), and 2,4-dinitrophenol (2,4-DNP), respectively. Throughout the study the hydraulic retention time (HRT) and COD/NO₃ ^-–N ratio were kept as 24 h and 10, respectively. 2-Aminophenol (2-AP), 4-aminophenol (4-AP) and 2-amino,4-nitrophenol (2-A,4-NP) were found as the major intermediate metabolites of 2-NP, 4-NP and 2,4-DNP degradation, respectively. Methanol was found to be a better carbon source for 4-NP and 2,4-DNP degradation as compared to acetate and glucose, while 2-NP degradation was not influenced much by the change of substrate. Nitrate nitrogen removal was always more than 99%. COD removal efficiency of the nitrophenol fed reactors varied from 85.7% to 97.7%. The oxidation-reduction potential (ORP) inside the reactors dropped, up to –300 mv, with glucose as carbon source. As the reactors were switched over to methanol, ORP increased to –190 mv. The granular sludge developed inside the reactors was light brown in colour when acetate and glucose were used as substrate, which turned dark brown to black at the end of methanol run. Biomass yield in terms of volatile suspended solids was observed as 0.15, 0.089 and 0.14 g per gram of COD removal for acetate, glucose and methanol, respectively.     

Continuous detoxification, transformation, and degradation of nitrophenols in upflow anaerobic sludge blanket (UASB) reactors

The anaerobic transformation and degradation of nitrophenols by granular sludge was investigated in upflow anaerobic sludge blanket (UASB) reactors continuously fed with a volatile fatty acid (VFA) mixture as the primary substrate. During the start-up, subtoxic concentrations of 2-nitrophenol (2-NP), 4-nitrophenol (4-NP), and 2, 4-dinitrophenol (2, 4-DNP) were utilized. 4-NP and 2, 4-DNP were readily converted to the corresponding aromatic amine; whereas 2-NP was converted to nonaromatic products via intermediate formation of 2-aminophenol (2-AP). These conversions led to a dramatic detoxification of the mononitrophenols because the reactors treated the nitrophenolics at the concentrations which were over 25 times higher than those that caused severe inhibition. VFA removal efficiencies greater than 99% were achieved in both reactors at loading rates greater than 11.4 g COD per liter of reactor volume per day even at volumetric loading of mononitrophenols up to 910 mg/L . d.The sludges obtained from each of the reactors at the end of the continuous experiments were assayed for their specific nitrophenol reducing activity in the presence of different primary substrates. Reduction rates of 45 and 26 mg/g volatile suspended solids per day were observed for 2-NP and 4-NP, respectively, when utilizing the VFA mixture as primary substrate. Hydrogen, an interspecies-reduced compound, and substrates that provide interspecies-reducing equivalents-such as butyrate, propionate, and ethanol stimulated nitrophenol reduction, whereas acetate and methanol did not. Anaerobic batch biodegradability tests with the 2-NP-adapted sludge revealed that its corresponding aromatic amine, 2-AP, was degraded to methane at a specific rate of 14.5 mg/g VSS . d. Acetate was observed to be the major intermediate during 2-AP degradation in the presence of a specific methanogenic inhibitor 2-bromoethanesulfonate. The results of this study indicate that UASB reactors can be applied to rapidly detoxify and, under certain circumstances, degrade nitroaromatic compounds. (c) 1996 John Wiley & Sons, Inc.     

Thermophilic high-rate anaerobic treatment of wastewater containing long-chain fatty acids: impact of reactor hydrodynamics

The liquid superficial up_ow velocity (V_up) and hydraulic retention time (HRT) on the thermophilic treatment of oleate in expanded granular sludge bed (EGSB) reactors were investigated. The highest methane conversion rate of oleate, 93 mg CH₄-COD/g VSS.d, was attained in a reactor operating at a V_up of 1 m/h and an HRT of 24 h. The typical EGSB reactor hydrodynamics (V_up > 4 m/h and HRT < 10 h) inhibited the treatment performance, mainly due to biomass washout in particulate form. This revised version was published online in November 2006 with corrections to the Cover Date.     

菌藻共生系统对序批式反应器处理养猪废水脱氮除磷效果及微生物群落结构的影响

【背景】养猪废水作为高浓度有机废水,是导致我国农业面源污染的主要因素之一。目前采用菌藻共生系统处理养猪废水越来越受到关注,与传统序批式反应器(Sequencing Batch Reactor,SBR)相比,藻辅助SBR具有提高脱氮除磷效果、增加污泥活性和降低能源消耗的特点。【目的】针对SBR中菌藻共生系统对养猪废水脱氮除磷效能的影响,比较分析菌藻共生系统与常规SBR系统中污泥特性及微生物群落结构特征差异。【方法】在室温条件下分别平行运行SBR+微藻(R1)和作为对照系统不添加微藻的SBR(R2)。监测R1和R2系统废水处理效果,污泥的粒径、沉降性和代谢产物等污泥特性。利用变性梯度凝胶电泳(Denaturing Gradient Gel Electrophoresis,DGGE)技术分析R1和R2系统中的微生物种类和分布。【结果】与对照R2反应器相比,R1的化学需氧量(Chemical Oxygen Demand,COD)去除率提高了5.1%,NH4+-N提高了20.3%,总氮(Total Nitrogen,TN)提高了19.4%,总磷(Total Phosphorus,TP)提高了23.9%。进一步对反应器中的污泥特性进行分析发现,与R2相比,R1的胞外聚合物(ExtracellularPolymericSubstances,EPS)平均含量提高3.7%,可溶性微生物产物(Soluble MicrobialProduct,SMP)平均增加了38.5%。同时R1的污泥粒径较R2提高了14.8%,污泥体积指数(Sludge Volume Index,SVI)值较R2降低了11.7%,污泥的好氧呼吸速率(Specific Oxygen Uptake Rate,SOUR)较R2提高了64.8%,而且稳定的菌藻共生系统的形成进一步减少反应器出水中的悬浮固体浓度,表明藻类的添加对R1污泥特性具有改良作用【结论】R1反应器形成的菌藻共生体系可进一步优化微生物群落结构,其中放线菌纲(Actinobacteria)、α-变形菌纲(Alphaproteobacteria)和γ-变形菌纲(Gammaproteobacteria)为R1反应器的主要菌群,对养猪废水的处理起到重要作用。R1反应器中的藻类主要为链带藻属(Desmodesmus)和尖带藻属(Acutodesmus),对养猪废水的脱氮除磷起到重要作用。     

Long-term effect of dissolved oxygen on partial nitrification performance and microbial community structure

In this study, the performance of partial nitrification via nitrite and microbial community structure were investigated and compared in two sequencing batch reactors (SBR) with different dissolved oxygen (DO) levels. Both reactors achieved stable partial nitrification with nitrite accumulation ratio of above 95% by using real-time aeration duration control. Compared with high DO (above 3 mg/l on average) SBR, simultaneous nitrification and denitrification (SND) via nitrite was carried out in low DO (0.4–0.8 mg/l) SBR. The average efficiencies of SND in high DO and low DO reactor were 7.7% and 44.9%, and the specific SND rates were 0.20 and 0.83 mg N/(mg MLSS h), respectively. Low DO did not produce sludge with poorer settling properties but attained lower turbidities of the effluent than high DO. Fluorescence in situ hybridization (FISH) analysis in both the reactors showed that ammonia-oxidizing bacteria (AOB) were the dominant nitrifying bacteria and nitrite-oxidizing bacteria (NOB) did not be recovered in spite of exposing nitrifying sludge to high DO. The morphology of the sludge from both two reactors according to scanning electron microscope indicated that small rod-shaped and spherical clusters were dominant, although filamentous bacteria and few long rod-shaped coexisted in the low DO reactor. By selecting properly DO level and adopting process control method is not only of benefit to the achievement of novel biological nitrogen removal technology, but also favorable to sludge population optimization.     

BOD5 and COD removal and sludge production in SBR working with or without anoxic phase

The aim of this study was to estimate the BOD(5) and COD removal efficiency and biomass yield coefficient in sequencing batch reactors (SBR) treating landfill leachate. Experiments were carried out in four SBRs at HRT of 12, 6, 3 and 2d. Two series were performed. In series 1, the reactors were operated in a 24h cycle mode (anoxic 3h, aeration 18 h, settling 2.75 h, and discharge 0.25 h). In series 2, however, the anoxic phase was eliminated. In both series the BOD(5) removal efficiency was almost identical--over 98%. On shortening HRT from 12 to 2d, COD removal efficiency decreased from 83.1% to 76.7% (series 1). In series 2, efficiency ranged from 79.6% to 75.7%. In the reactors working with the anoxic phase the observed biomass yield coefficient (Y(obs)) was nearly constant (0.55-0.6 mg VSS/mg COD). Upon elimination of the anoxic phase, the Y(obs) was observed to decrease from 0.32 mg VSS/mg COD (HRT 2d) to 0.04 mg VSS/mg COD (HRT 12d).     

Treatment of dairy effluents in an aerobic granular sludge sequencing batch reactor

Aerobic granular sludge can successfully be cultivated in a sequencing batch reactor (SBR) treating dairy wastewater. Attention has to be paid to the fact that suspended solids are always present in the effluent of aerobic granular sludge reactors, making a post-treatment step necessary. Sufficient post-treatment can be achieved through a sedimentation process with a hydraulic retention time of 15–30 min. After complete granulation and the separation of biomass from the effluent, removal efficiencies of 90% COD_total, 80% N_total and 67% P_total can be achieved at a volumetric exchange ratio of 50% and a cycle duration of 8 h. Effluent values stabilize at around 125 mg l^–1 COD_dissolved. The maximum applicable loading rate is nevertheless limited, as the stability of aerobic granules very much depends on the presence of distinct feast and famine conditions and the degradation of real wastewaters shows slower kinetics compared with synthetic wastewaters. As loading rate and volumetric exchange ratio are coupled in an SBR system, the potential of granular sludge for improving process efficiency is also limited.     

Effect of basic operating parameters on biological phosphorus removal in a continuous-flow anaerobic–anoxic activated sludge system

A continuous-flow anaerobic–anoxic (A2) activated sludge system was operated for efficient enhanced biological phosphorus removal (EBPR). Because of the system configuration with no aeration zones, phosphorus (P) uptake takes place solely under anoxic conditions with simultaneous denitrification. Basic operating conditions, namely biomass concentration, influent carbon to phosphorus ratio and anaerobic retention time were chosen as variables in order to assess their impact on the system performance. The experimental results indicated that maintenance of biomass concentration above 2,500 mg MLVSS/L resulted in the complete phosphate removal from the influent (i.e. 15 mg PO₄ ³⁻-P/L) for a mean hydraulic residence time (HRT) of 15 h. Additionally, by increasing the influent COD/P ratio from 10 to 20 g/g, the system P removal efficiency was improved although the experimental results indicated a possible enhancement of the competition between phosphorus accumulating organisms (PAOs) and other microbial populations without phosphorus uptake ability. Moreover, because of the use of acetate (i.e. easily biodegradable substrate) as the sole carbon source in the system feed, application of anaerobic retention times greater than 2 h resulted in no significant release of additional P in the anaerobic zone and no further amelioration of the system P removal efficiency. The application of anoxic P removal resulted in more than 50% reduction of the organic carbon necessitated for nitrogen and phosphorus removal when compared to a conventional EBPR system incorporating aerobic phosphorus removal.