Genetic Applications of an Inverse Polymerase Chain Reaction

A method is presented for the rapid in vitro amplification of DNA sequences that flank a region of known sequence. The method uses the polymerase chain reaction (PCR), but it has the primers oriented in the reverse direction of the usual orientation. The template for the reverse primers is a restriction fragment that has been ligated upon itself to form a circle. This procedure of inverse PCR (IPCR) has many applications in molecular genetics, for example, the amplification and identification of sequences flanking transposable elements. In this paper we show the feasibility of IPCR by amplifying the sequences that flank an IS1 element in the genome of a natural isolate of Escherichia coli.     

Retrieval of entire genes from environmental DNA by inverse PCR with pre-amplification of target genes using primers containing locked nucleic acids

We had been unsuccessful to amplify desired nucleotide sequences from various environmental DNA samples by using the inverse polymerase chain reaction (IPCR) technique, most probably because the copy numbers of target DNA sequences had been quite low. To enrich the target DNA sequences prior to IPCR, a rolling-circle amplification was used with a site-specific primer containing locked nucleic acids (LNAs). This pre-amplified IPCR (PAI-PCR) method increased the sensitivity of PCR almost 10 000 times compared with the standard IPCR in model experiments using Escherichia coli . We then applied the PAI-PCR method to isolate glycosyl hydrolase genes from DNAs extracted from vermiform appendixes of horses and termite guts. The flanking sequences of the target genes were amplified and cloned successfully using PAI-PCR, whereas standard IPCR resulted in no amplification.     

Nested Inverse Polymerase Chain Reactions: An Effective Method for Cloning of Full-Length Sequences of Chalcone Synthase

Chalcone synthase is the key enzyme in biosynthesis of flavonoids, which play roles in pigmentation of flowers and protection against ultraviolet and pathogens. Inverse polymerase chain reaction (IPCR) is a method for the rapid in vitro amplification of DNA sequences that flank a region of known sequence. In this study, IPCR united with nested PCR was successfully applied in cloning full-length sequences of three Phalaenopsis chalcone synthase genes (phchs3, phchs4, and phchs5, respectively). Firstly, routine PCR with homologous primers were performed, and gene fragments of phchs3 (1 kb), phchs4 (1.2 kb), and phchs5 (800 bp) were obtained and then sequenced. Then, inverse PCR were carried out for cloning full-length sequence of each gene. Because products were not unique in single round inverse PCR, nested PCR were performed, and the specificity was much enhanced. At last, full-length sequences of 2,499 bp for phchs3, 2,502 bp for phchs4, and 1,855 bp for phchs5 were obtained. This study proved that IPCR could be more efficient if being united with nested PCR.     

cDNA末端快速扩增技术的研究进展

cDNA末端快速扩增技术是一种基于多聚酶链式反应的技术 ,它的发展大大便利了应用其它方法获得的部分cDNA序列后克隆全长cDNA 5’和 3’末端的工作。不仅RACE方法能在短时间内得到完整的cDNA末端序列 ,而且一些截短的cDNA末端常常也能在RACE的过程中被扩增 ,而这些截短的产物破坏了全长cDNA克隆的获取。许多研究者对RACE的流程提出了改进方案 ,从而提高了该技术的效力。本文介绍了许多已发表的RACE技术关键步骤的改良 ,包括一些具体有效的操作流程 ,如RNA连接酶介导的RACE/连接锚定PCR等 ,还有其有效性的例证。     

A modified cDNA subtraction to identify differentially expressed genes from plants with universal application to other eukaryotes

We have designed a simple and efficient polymerase chain reaction (PCR)-based cDNA subtraction protocol for high-throughput cloning of differentially expressed genes from plants that can be applied to any experimental system and as an alternative to DNA chip technology. Sequence-independent PCR-amplifiable first-strand cDNA population was synthesized by priming oligo-dT primer with a defined 5' heel sequence and ligating another specified single-stranded oligonucleotide primer on the 3' ends of first-strand cDNAs by T4 RNA ligase. A biotin label was introduced into the sense strands of cDNA that must be subtracted by using 5' biotinylated forward primer during PCR amplification to immobilize the sense strand onto the streptavidin-linked paramagnetic beads. The unamplified first strand (antisense) of the interrogating cDNA population was hybridized with a large excess of amplified sense strands of control cDNA. We used magnetic bead technology for the efficient removal of common cDNA population after hybridization to reduce the complexity of the cDNA prior to PCR amplification for the enrichment and sequence abundance normalization of differentially expressed genes. Construction of a subtracted and normalized cDNA library efficiently eliminates common abundant cDNA messages and also increases the probability of identifying clones differentially expressed in low-abundance cDNA messages. We used this method to successfully isolate differentially expressed genes from Pennisetum seedlings in response to salinity stress. Sequence analysis of the selected clones showed homologies to genes that were reported previously and shown to be involved in plant stress adaptation.     

Analysis of the 3' UTR of the ART3 and ART4 gene by 3' inverse RACE-PCR.

3' Rapid amplification of cDNA ends (3' RACE) is a polymerase chain reaction (PCR) based technique which has been developed to analyse 3' ends of partially known cDNA sequences. To improve the effectiveness of the technique, many investigators have modified the RACE protocol. Here, we describe an alternative procedure for analysing 3' mRNA ends which is based on DNA ligase-mediated self circularization and inverse PCR. This technique is simple and characterized by the exclusive use of gene-specific primers and the absence of unspecific adaptor sequences to obtain highly specific PCR products. We applied the method to analyze the 3' UTR of human mono-ADP-ribosyltransferase (ART) 3 mRNA in testis and heart muscle and of ART4 mRNA in HEL cells. The obtained sequences of ART3 and ART4 mRNA corresponded to data base entries of the respective mRNAs. No adenylate/uridylate-rich elements (AREs) were found in the 3' UTR of ART3 mRNA while one ARE class I motif was detected in the 3' UTR of ART4 mRNA.     

Analysis of the chromosomal distribution of transposon-carrying T-DNAs in tomato using the inverse polymerase chain reaction

We are developing a system for isolating tomato genes by transposon mutagenesis. In maize and tobacco, the transposon Activator (Ac) transposes preferentially to genetically linked sites. To identify transposons linked to various target genes, we have determined the RFLP map locations of Ac- and Dissociation (Ds)-carrying T-DNAs in a number of transformants. T-DNA flanking sequences were isolated using the inverse polymerase chain reaction (IPCR) and located on the RFLP map of tomato. The authenticity of IPCR reaction products was tested by several criteria including nested primer amplification, DNA sequence analysis and PCR amplification of the corresponding insertion target sequences. We report the RFLP map locations of 37 transposon-carrying T-DNAs. We also report the map locations of nine transposed Ds elements. T-DNAs were identified on all chromosomes except chromosome 6. Our data revealed no apparent chromosomal preference for T-DNA integration events. Lines carrying transposons at known map locations have been established which should prove a useful resource for isolating tomato genes by transposon mutagenesis.     

Global amplification of cDNA from limiting amounts of tissue. An improved method for gene cloning and analysis

In this study we present an improved polymerase chain reaction (PCR)-based methodology to generate large amounts of high-quality complementary DNA (cDNA) from small amounts of initial total RNA. Global amplification of cDNA makes it possible to simultaneously clone many cDNAs and to construct directional cDNA libraries from a sequence-abundance-normalized cDNA population, and also permits rapid amplification of cDNA ends (RACE), from a limited amount of starting material. The priming of cDNAs with an adapter oligo-deoxythymidine (oligo-dT) primer and the ligation of a modified oligonucleotide to the 3′ end of single-stranded cDNAs, through the use of T4 RNA ligase, generates known sequences on either end of the cDNA population. This helps in the global amplification of cDNAs and in the sequence-abundance normalization of the cDNA population through the use of PCR. Utilization of a long-range PCR enzyme mix to amplify the cDNA population helps to reduce bias toward the preferential amplification of shorter molecules. Incorporation of restriction sites in the PCR primers allows the amplified cDNAs to be directionally cloned into appropriate cloning vectors to generate cDNA libraries. RACE-PCR done with biotinylated primers and streptavidin-coated para-magnetic particles are used for the efficient isolation of either full-length coding or noncoding strands.     

利用Inverse PCR快速筛选单个T-DNA拷贝转基因水稻植株的方法

为了获得单个T-DNA插入拷贝的植株, 我们建立了一套利用Inverse PCR(IPCR)快速检测转基因水稻中T-DNA拷贝数的方法。用IPCR的方法可以扩增出与已知T-DNA序列相邻的水稻基因组DNA未知序列,由此推测转基因水稻植株中T-DNA的拷贝数。我们共对15个转化株系20棵不同植株的DNA进行了IPCR检测。其中12株表现为T-DNA单拷贝插入,3株为双拷贝插入,1株为三拷贝插入。另外4株未检测到T-DNA插入拷贝。IPCR分析结果经过Southern杂交和测序的验证。     

Single primer-mediated polymerase chain reaction: application in cloning of two different 5'-untranslated sequences of acidic fibroblast growth factor mRNA.

Polymerase chain reactions (PCR) are used to generate specific DNA sequences from minute amounts of DNA templates using a pair of oligonucleotide primers. To amplify regions of unknown sequence, methods such as inverted PCR, Alu PCR, and rapid amplification of cDNA ends (RACE) have been developed. These methods require several enzymatic manipulations of DNA which are either tedious or only suitable for certain special conditions. We have explored the possibility of PCR using a single primer. This method takes advantage of the fact that partial complementarity provides sufficient affinity for the oligonucleotide primer to anneal to a secondary, imperfect binding site. Thus, no modification of DNA template was required for the single primer-mediated PCR. We have used this method to generate two different aFGF cDNA clones containing different 5'-untranslated sequences.     

利用Inverse PCR快速筛选单个T—DNA拷贝转基因水稻植株的方法

In order to obtain single T-DNA copy transgenic rice, we have established a quick method to estimate the T-DNA copy number in transgenic rice using inverse PCR (IPCR). IPCR was used to amplify junction fragments, i.e. plant genomic DNA sequences flanking the known T-DNA sequences, which will help to estimate the T-DNA copy number in transgenic rice. We have analyzed 20 transgenic plants of 15 transgenic lines. Most plants (12) contain one integrated T-DNA copy per genome, 3 plants contain two and 1 plant contains 3 copies. In 4 transgenic plants no T-DNA copies could be detected using this method. The IPCR results were further tested by Southern analysis and sequence analysis.     

A simple and efficient method to determine the terminal sequences of restriction fragments containing known sequences.

We present an improvement of the inverse PCR method for the determination of end sequences of restriction fragments containing unknown DNA sequences flanked by known segments. In this approach, a short "bridge" DNA is inserted during the self-ligation step of the inverse PCR technique. This bridge DNA acts as primer annealing sites for amplification and subsequent direct sequencing. Successive PCR amplifications enable selective amplification of the unknown sequences from a complex mixture. Unlike previously described methods, our method does not require special materials, such as synthetic adapters or biotinylated primers that must be prepared each time to adapt the target. Furthermore, no complex steps such as dephosphorylation or purification are needed. Our method can save time and reduce the cost of cloning unknown sequences; it is ideal for routine, rapid gene walking. We applied this method to a GC-rich bacterial genome and succeeded in determining the end sequences of a 4.5-kb fragment.     

PCR- and ligation-mediated synthesis of marker cassettes with long flanking homology regions for gene disruption in Saccharomyces cerevisiae.

We developed a novel method for synthesizing marker-disrupted alleles of yeast genes. The first step is PCR amplification of two sequences located upstream and downstream of the reading frame to be disrupted. Due to the addition of non-specific single A overhangs by Taq DNA polymerase, each PCR product can be ligated with a marker DNA which has T residues at its 3' ends. After amplification of individual ligation products through the second PCR, both products are mixed and annealed, and the single strand is converted to a double strand by an extension reaction. The final step is PCR amplification of the fragment composed of a selectable marker and two flanking sequences with the outermost primers. This method is rapid and needs only short oligonucleotides as primers.     

小花棘豆(Oxytripis glabra DC)毒素基因的cDNA克隆及序列测定

在完成小花棘豆毒素 95 %氨基酸序列的基础上 ,根椐已知的氨基酸序列 ,设计合成了特异简并引物 .以小花棘豆总RNA为模板 ,逆转录合成cDNA第一链 ,用置换法合成双链cDNA .用特异引物对此双链cDNA进行PCR扩增 ,将扩增后的目的基因与用SmaⅠ酶切的质粒pUC 18连接 ,转化大肠杆菌JM10 7.筛选阳性克隆进行序列分析 ,获得了OXY基因的全部序列 .经测序后测得基因序列与原氨基酸序列对照完全一致 .GenBnak数据检索说明 ,OXY基因编码序列确定是一个从未报道的序列 .此研究结果对该毒素的应用研究奠定了基础 .     

不同花色矮牵牛细胞色素b5蛋白的cDNA克隆及序列分析

以云南不同花色矮牵牛的花瓣为材料,提取总RNA,用Oligo(dT)作为引物反转录合成cDNA第一链。以此为模板,用根据国外报道的矮牵牛细胞色素b5蛋白的cDNA序列设计合成的引物进行PCR扩,均扩增到一条约450bp的片段,分别克隆到pGEM-T载体上。对重组克隆进行序列分析,结果表明所克隆到的矮牛细胞色素b5蛋白的cDNA的编码区均含有447个核苷酸,编码149个氨基酸残基,与国外报道的一致;但其核苷酸及氨基酸的序列与国外报道的有所不同,即与国外的相比,紫红色、蓝紫色矮牵牛中的该cDNA的核苷酸有1个不同,而氨基酸完全相同;粉红色、白色矮牵牛中的3个核苷酸不同,并导致了2个氨基酸的不同。暗示该基因对花色的调控可能与其编码cDNA的一级结构有关。     

Cloning and expression of a novel lipase gene from Pseudomonas fluorescens B52

Here we describe an advanced polymerase chain reaction (PCR) technique, the compatible ends ligation inverse PCR (CELI-PCR) for chromosome walking. In CELI-PCR, several restriction enzymes, which produce compatible cohesive ends, were used to digest target DNA simultaneously or sequentially to produce DNA fragments of suitable size. DNA fragments were then easily circularized and PCR amplification could be carried out efficiently. The previous limitations of inverse PCR were overcome, such as unavailable restriction sites, poor template DNA circularization, and low amplification efficiency. Therefore, successive chromosome walking was performed successfully. Our work, isolating a 11,395-bp fragment from Gossypium hirsutum, was presented as an example to describe how CELI-PCR was carried out.     

Specific DNA amplification utilizing the polymerase chain reaction and random oligonucleotide primers: application to the analysis of antigen receptor variable regions.

The polymerase chain reaction (PCR) allows rapid amplification of DNA of known sequence. In many situations, part of a genetic sequence is known, but adjacent sequences of interest are unknown. This is common in investigations of antigen receptor genes from B and T lymphocytes, which are composed of a constant region of known sequence and a variable region, for which the sequence may not be known. Herein is described a method to amplify DNA when sequence information is available for only one primer. This procedure utilizes a primer of known sequence in conjunction with a mixture of short random primers. Application of this method to the amplification of T-cell antigen receptor cDNA is described.