A rapid procedure for the construction of PCR cDNA libraries from small amounts of plant tissue

We describe a general method for the preparation of λZAP II cDNA libraries from very small amounts (<50 mg) of plant tissue. We have achieved this by combining an efficient method for RNA extraction with a modified PCR protocol for the synthesis and amplification of cDNA. Using this protocol we have found it possible to generate cDNA libraries containing more than 10⁶ clones from as little as 1 μg of total RNA.     

Subtraction of cap-trapped full-length cDNA libraries to select rare transcripts

The normalization and subtraction of highly expressed cDNAs from relatively large tissues before cloning dramatically enhanced the gene discovery by sequencing for the mouse full-length cDNA encyclopedia, but these methods have not been suitable for limited RNA materials. To normalize and subtract full-length cDNA libraries derived from limited quantities of total RNA, here we report a method to subtract plasmid libraries excised from size-unbiased amplified lambda phage cDNA libraries that avoids heavily biasing steps such as PCR and plasmid library amplification. The proportion of full-length cDNAs and the gene discovery rate are high, and library diversity can be validated by in silico randomization.     

一种简单快速克隆IL-6信号转导相关基因的方法

细胞因子作用于受体时的一个重要结果是诱导基因表达。为了克隆与IL-6诱导相关的基因,我们利用一个快速的改良DD-PCR方法,分离并检测了IL-6诱导和未诱导的U937细胞的差异表达基因。用三个完全变性的6—mer引物进行反转录,用2或3个较长的随机引物进行PCR扩增,扩增产物很在2%琼脂糖凝胶电泳上分离,之后回收差异片段并直接用于克隆和测序。在研究中,获得了7个不同的EST,序列分析表明其中2个EST可能是与细胞信号转导相关的新基因片段;反向Northern杂交证实它们是与IL-6作用相关的差异表达基因。     

Algorithms and software for support of gene identification experiments

MOTIVATION: Gene annotation is the final goal of gene prediction algorithms. However, these algorithms frequently make mistakes and therefore the use of gene predictions for sequence annotation is hardly possible. As a result, biologists are forced to conduct time-consuming gene identification experiments by designing appropriate PCR primers to test cDNA libraries or applying RT-PCR, exon trapping/amplification, or other techniques. This process frequently amounts to 'guessing' PCR primers on top of unreliable gene predictions and frequently leads to wasting of experimental efforts. RESULTS: The present paper proposes a simple and reliable algorithm for experimental gene identification which bypasses the unreliable gene prediction step. Studies of the performance of the algorithm on a sample of human genes indicate that an experimental protocol based on the algorithm's predictions achieves an accurate gene identification with relatively few PCR primers. Predictions of PCR primers may be used for exon amplification in preliminary mutation analysis during an attempt to identify a gene responsible for a disease. We propose a simple approach to find a short region from a genomic sequence that with high probability overlaps with some exon of the gene. The algorithm is enhanced to find one or more segments that are probably contained in the translated region of the gene and can be used as PCR primers to select appropriate clones in cDNA libraries by selective amplification. The algorithm is further extended to locate a set of PCR primers that uniformly cover all translated regions and can be used for RT-PCR and further sequencing of (unknown) mRNA.      

Isolation of cytochrome P-450 cDNA clones from the higher plant Catharanthus roseus by a PCR strategy

Cytochrome P-450 monooxygenases are membrane-bound enzymes involved in a wide range of biosynthetic pathways in plants. An efficient PCR strategy for isolating cytochrome P-450 cDNA clones from plant cDNA libraries is described. A set of degenerate primers for PCR amplification was designed to recognize nucleotide sequences specifying the highly conserved haembinding region of cytochrome P-450 proteins. Using this primer set and a non-specific primer, complementary to either the poly(A) tail of the cDNA clones or a phage vector sequence, we isolated 16 different cytochrome P-450 cDNA sequences from a cDNA library of Catharanthus roseus.     

用一个简单快速的RT-PCR技术筛选白细胞介素-6作用相关基因

为了研究白细胞介素-6(IL-6)作用相关基因以及一些可能受IL-6调控的基因,利用一个简单快速的以PCR为基础的方案,检测了IL-6处理和未处理的Sko007细胞中基因表达的差异,克隆并鉴定了差异表达基因的cDNA片段.首先用6-mer寡核苷酸引物进行反转录从而最大限度地将mRNA编码区序列生成cDNA;然后用2或3个较长的随机引物进行PCR扩增,并以不同引物组合重复PCR增扩;扩增产物在2%琼脂糖凝胶上电泳分离,回收差异片段并直接用于克隆、测序及进一步分析.在此研究中,获得了3个表达序列标签(EST),其中一个为新的基因片段,反向RNA杂交有力证实了它们与IL-6作用的相关性.进一步的生物信息学分析表明,新基因片段STRF17在多种组织中表达.     

Single primer-mediated polymerase chain reaction: application in cloning of two different 5'-untranslated sequences of acidic fibroblast growth factor mRNA.

Polymerase chain reactions (PCR) are used to generate specific DNA sequences from minute amounts of DNA templates using a pair of oligonucleotide primers. To amplify regions of unknown sequence, methods such as inverted PCR, Alu PCR, and rapid amplification of cDNA ends (RACE) have been developed. These methods require several enzymatic manipulations of DNA which are either tedious or only suitable for certain special conditions. We have explored the possibility of PCR using a single primer. This method takes advantage of the fact that partial complementarity provides sufficient affinity for the oligonucleotide primer to anneal to a secondary, imperfect binding site. Thus, no modification of DNA template was required for the single primer-mediated PCR. We have used this method to generate two different aFGF cDNA clones containing different 5'-untranslated sequences.     

Molecular characterization of multiple cDNA clones for ADP-glucose pyrophosphorylase from Arabidopsis thaliana

PCR amplification of cDNA prepared from poly(A)⁺ RNA from aerial parts of Arabidopsis thaliana, using degenerate nucleotide primers based on conserved regions between the large and small subunits of ADP-glucose pyrophosphorylase (AGP), yielded four different cDNAs of ca. 550 nucleotides each. Based on derived amino acid sequences, the identities between the clones varied from 49 to 69%. Sequence comparison to previously published cDNAs for AGP from various species and tissues has revealed that three of the amplified cDNAs (ApL1, ApL2 and ApL3) correspond to the large subunit of AGP, and one cDNA (ApS) encodes the small subunit of AGP. Both ApL1 and ApS were subsequently found to be present in a cDNA library made from Arabidopsis leaves. All four PCR products are encoded by single genes, as found by genomic Southern analysis.     

Cross-species amplification of glutamine synthetase cDNA by polymerase chain reaction with degenerate primers

We have developed and optimized a consistent polymerase chain reaction (PCR)-based strategy to quickly obtain specific sequence information on novel plant glutamine synthetase (GS, EC 6.3.1.2) cDNAs. Two sets of degenerate primer pairs were designed to discriminate regions conserved in either any kind of GS messenger or exclusively in those for the chloroplastic GS. Novel GS cDNA sequences were successfully amplified from total RNA obtained from 14 different monocotyledonous and dicotyledonous plants. The procedure, coupled with a further restriction analysis, allowed us to uncover the presence of GS cDNA polymorphism, which most likely stems from the different GS gene family members within a single species. Contrary to previously reported strategies in other systems, GS cDNA oligonucleotide primers were designed keeping the degeneracy level to a minimum, together with a high melting temperature. This approach proved to be particularly effective, generating high yields of the expected products without requiring extra nested amplification steps or time-consuming optimization steps for each species GS cDNA amplification. Different clones containing sequence information from either the coding or the 3'-untranslated regions were further sequenced and characterized, confirming the high sequence identity and size uniformity the of GS cDNAs across higher plant species. Therefore, this approach is proposed as a stand-alone procedure to quickly determine the sequence of unknown GS cDNAs, as well as to speed up and complement classical molecular cloning methodologies.     

Directional random oligonucleotide primed (DROP) global amplification of cDNA: its application to subtractive cDNA cloning.

We describe a method of global PCR amplification of cDNA such that the strand sense is maintained. The products of this process are random primed fragments ranging in size from 100 to 500 bp which facilitates uniform PCR amplification of total cDNA. Directional incorporation of a T7 RNA polymerase initiator/promoter sequence allows efficient synthesis of total sense RNA from this material and the use of a biotinylated primer permits the separation of single-stranded cDNA. Isolation of these products from different cell types provides a renewable source of target single-stranded cDNA and driver RNA from limited cell numbers and we demonstrate their use for subtractive hybridisation cloning of differentially expressed cDNAs.     

Rapid amplification of genomic ends (RAGE) as a simple method to clone flanking genomic DNA

This report describes the amplification of upstream genomic sequences using the polymerase chain reaction (PCR) based solely on downstream DNA information from a cDNA clone. In this novel and rapid technique, genomic DNA (gDNA) is first incubated with a restriction enzyme that recognizes a site within the 5′ end of a gene, followed by denaturation and polyadenylation of its free 3′ ends with terminal transferase. The modified gDNA is then used as template for PCR using a gene-specific primer complementary to a sequence in the 3′ end of its cDNA and an anchored deoxyoligothymidine primer. A second round of PCR is then performed with a second, nested gene-specific primer and the anchor sequence primer. The resulting PCR product is cloned and its sequence determined. Three independent plant genomic clones were isolated using this method that exhibited complete sequence identity to their cDNAs and to the primers used in the amplification.     

Accurate Strand-Specific Quantification of Viral RNA

The presence of full-length complements of viral genomic RNA is a hallmark of RNA virus replication within an infected cell. As such, methods for detecting and measuring specific strands of viral RNA in infected cells and tissues are important in the study of RNA viruses. Strand-specific quantitative real-time PCR (ssqPCR) assays are increasingly being used for this purpose, but the accuracy of these assays depends on the assumption that the amount of cDNA measured during the quantitative PCR (qPCR) step accurately reflects amounts of a specific viral RNA strand present in the RT reaction. To specifically test this assumption, we developed multiple ssqPCR assays for the positive-strand RNA virus o''nyong-nyong (ONNV) that were based upon the most prevalent ssqPCR assay design types in the literature. We then compared various parameters of the ONNV-specific assays. We found that an assay employing standard unmodified virus-specific primers failed to discern the difference between cDNAs generated from virus specific primers and those generated through false priming. Further, we were unable to accurately measure levels of ONNV (−) strand RNA with this assay when higher levels of cDNA generated from the (+) strand were present. Taken together, these results suggest that assays of this type do not accurately quantify levels of the anti-genomic strand present during RNA virus infectious cycles. However, an assay permitting the use of a tag-specific primer was able to distinguish cDNAs transcribed from ONNV (−) strand RNA from other cDNAs present, thus allowing accurate quantification of the anti-genomic strand. We also report the sensitivities of two different detection strategies and chemistries, SYBR® Green and DNA hydrolysis probes, used with our tagged ONNV-specific ssqPCR assays. Finally, we describe development, design and validation of ssqPCR assays for chikungunya virus (CHIKV), the recent cause of large outbreaks of disease in the Indian Ocean region.     

Global single-cell cDNA amplification to provide a template for representative high-density oligonucleotide microarray analysis

We describe here a protocol for the representative amplification of global mRNAs from typical single mammalian cells to provide a template for high-density oligonucleotide microarray analysis. A single cell is lysed in a tube without purification and first-strand cDNAs are synthesized using a poly(dT)-tailed primer. Unreacted primer is specifically eliminated by exonuclease treatment and second strands are generated with a second poly(dT)-tailed primer after poly(dA) tailing of the first-strand cDNAs. The cDNAs are split into four tubes, which are independently directionally amplified by PCR, and then recombined. The amplified products (approximately 100 ng) show superior representation and reproducibility of original gene expression, especially for genes expressed in more than 20 copies per cell, compared with those obtained by a conventional PCR protocol, and can effectively be used for quantitative PCR and EST analyses. The cDNAs are then subjected to another PCR amplification with primers bearing the T7 promoter sequence. The resultant cDNA products are gel purified, amplified by one final cycle and used for isothermal linear amplification by T7 RNA polymerase to synthesize cRNAs for microarray hybridization. This protocol yields cDNA templates sufficient for more than 80 microarray hybridizations from a single cell, and can be completed in 5-6 days.