Heterologous expression and characterization of a recombinant thermophilic arylsulfatase from Thermotoga maritima

Production of low sulfated agar or agarose from agar or agaropectins by enzymatic hydrolysis has advantages but a high melting temperature is needed. The arylsulfatase gene from thermophilic Thermotoga maritima was cloned and expressed in Escherichia coli W3110 with pCol-MICT as the vector. The gene was comprised of 1,782 bp and encoded a protein of 593 amino acids with a molecular weight of 65 kDa. The recombinant arylsulfatase was partially purified by heat treatment (70°C, 30 min) and characterized. The enzyme was prepared with a total protein content of 2.4 mg and a specific activity of 20.63 U/mg. Optimal temperature and pH of the enzyme were 80°C and 7.0, respectively, for hydrolysis of p-nitrophenyl sulfate and sulfate content of agar was diminished to 40% after a 12 h treatment at that condition. Enhanced electrophoretic movement of DNA was observed in enzymetreated agar gel compared to that in a non-treated agar gel. These results suggest that thermophilic arylsulfatase expressed in E. coli could be useful for producing a low sulfated agar and electrophoretic grade agarose.     

Expression ofBacillus subtilis JA18 endo-β-1,4-glucanase gene inEscherichia coli and characterization of the recombinant enzyme

Endo-β-1,4-glucanase encoded byBacillus subtilis JA18 was expressed inEscherichia coli. The recombinant enzyme was purified and characterized. The purified enzyme showed a single band of 50 kDa by SDS-PAGE. The optimum pH and temperature for this endo-β-1,4-glucanase was pH 5.8 and 60 °C. The endo-β-1,4-glucanase was highly stable in a wide pH range, from 4.0 to 12.0. Furthermore, it remained stable up to 60 °C. The endo-β-1,4-glucanase was completely inhibited by 2 mM Zn²⁺, Cu²⁺, Fe³⁺, Ag⁺, whereas it is activated in the presence of Co²⁺. In addition, the enzyme activity was inhibited by 1 mM Mn²⁺ but stimulated by 10 mM Mn²⁺. At 1% concentration, SDS completely inhibited the enzyme. The enzyme hydrolysed carboxymethylcellulose, lichenan but no activity was detected with regard to avicel, xylan, chitosan and laminarin. For carboxymethylcellulose, the enzyme had a Km of 14.7 mg/ml.     

Characterization of a recombinant thermostable xylanase from deep-sea thermophilic Geobacillus sp. MT-1 in East Pacific

A novel xylanase-producing thermophilic strain MT-1 was isolated from a deep-sea hydrothermal field in east Pacific. A xylanase gene encoding 331 amino-acid peptide from this isolate was cloned and expressed in Escherichia coli. The recombinant xylanase exhibited maximum activity at 70°C and had an optimum pH of 7.0. It was active up to 90°C and showed activity over a wide pH ranging from 5.5 to 10.0. The crude xylanase presented similar properties in temperature and pH to those of the recombinant xylanase. The recombinant xylanase was stable in 1 mM of enzyme inhibitors (PMSF, EDTA, 2-ME or DTT) and in 0.1% detergents (Tween 20, Chaps or Triton X-100), whereas, it was strongly inhibited by sodium dodecyl sulfate (SDS) (1 mM). In addition, its catalytic function was stable in the presence of Li⁺, Na⁺ or K⁺. However, it was strongly inhibited by Ni²⁺, Mn²⁺, Co²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Hg²⁺ and Al³⁺ (1 or 0.1 mM). The K _m and V _max of the recombinant xylanase for oat spelt xylan were calculated to be 1.579 mg/ml and 289 μmol/(min • mg), respectively. Our study, therefore, presented a rapid overexpression and purification of xylanase from deep-sea thermophile aimed at improving the enzyme yield for industrial applications and scientific research.     

Characterization of Native and Recombinant Forms of an Unusual Cobalt-Dependent Proline Dipeptidase (Prolidase) from the Hyperthermophilic Archaeon Pyrococcus furiosus

Proline dipeptidase (prolidase) was purified from cell extracts of the proteolytic, hyperthermophilic archaeon Pyrococcus furiosus by multistep chromatography. The enzyme is a homodimer (39.4 kDa per subunit) and as purified contains one cobalt atom per subunit. Its catalytic activity also required the addition of Co²⁺ ions (K_d, 0.24 mM), indicating that the enzyme has a second metal ion binding site. Co²⁺ could be replaced by Mn²⁺ (resulting in a 25% decrease in activity) but not by Mg²⁺, Ca²⁺, Fe²⁺, Zn²⁺, Cu²⁺, or Ni²⁺. The prolidase exhibited a narrow substrate specificity and hydrolyzed only dipeptides with proline at the C terminus and a nonpolar amino acid (Met, Leu, Val, Phe, or Ala) at the N terminus. Optimal prolidase activity with Met-Pro as the substrate occurred at a pH of 7.0 and a temperature of 100°C. The N-terminal amino acid sequence of the purified prolidase was used to identify in the P. furiosus genome database a putative prolidase-encoding gene with a product corresponding to 349 amino acids. This gene was expressed in Escherichia coli and the recombinant protein was purified. Its properties, including molecular mass, metal ion dependence, pH and temperature optima, substrate specificity, and thermostability, were indistinguishable from those of the native prolidase from P. furiosus. Furthermore, the K_m values for the substrate Met-Pro were comparable for the native and recombinant forms, although the recombinant enzyme exhibited a twofold greater V_max value than the native protein. The amino acid sequence of P. furiosus prolidase has significant similarity with those of prolidases from mesophilic organisms, but the enzyme differs from them in its substrate specificity, thermostability, metal dependency, and response to inhibitors. The P. furiosus enzyme appears to be the second Co-containing member (after methionine aminopeptidase) of the binuclear N-terminal exopeptidase family.     

Structural and biochemical properties of lichenase from <Emphasis Type="Italic">Clostridium thermocellum</Emphasis>

The recombinant enzyme lichenase of size 30 kDa was over-expressed using E. coli cells and purified by immobilized metal ion affinity chromatography (IMAC) and size exclusion chromatography. The enzyme displayed high activity towards lichenan and β-glucan. The enzyme showed no activity towards carboxymethyl cellulose, laminarin, galactomannan or glucomannan. Surprisingly, affinity-gel electrophoresis on native-PAGE showed that the enzyme binds only glucomannan and not lichenan or β-glucan or other manno-configured substrates. The enzyme was thermally stable between the temperatures 60°C and 70°C. Presence of Cu²⁺ ions at a concentration of 5 mM enhanced enzyme activity by 10% but higher concentrations of Cu²⁺ (>25 mM) showed a sharp fall in the enzyme activity. Heavy metal ions Ni²⁺, Co²⁺ and Zn²⁺ did not affect the activity of the enzyme at low concentrations (0–10 mM) but at higher concentrations (>10 mM), caused a decrease in the enzyme activity. The crystals of lichenase were produced and the 3-dimensional structure of native form of enzyme was previously solved at 1.50 Å. Lichenase displayed (β/α)₈-fold a common fold among many glycoside hydrolase families. A cleft was identified that represented the probable location of active site.     

Entamoeba histolytica: Molecular cloning and characterization of a novel neutral sphingomyelinase

A novel neutral sphingomyelinase (nSMase) was characterized in Entamoeba histolytica trophozoites. SMase, a sphingomyelin-specific form of phospholipase C, catalyzes the hydrolysis of sphingomyelin to ceramide and phosphorylcholine. Three amebic putative nSMase genes were found to be actively transcribed. Mg²⁺-independent nSMase activity in the soluble fraction of the trophozoites was stimulated by Mn²⁺ and partially inhibited by Zn²⁺. nSMase activity of the recombinant protein EhnSM1, increased 4.5-fold in the presence of 0.5 mM Mn²⁺, and abolished by 5 mM Zn²⁺. A dose-dependent inhibition of rEhnSM1 was observed with scyphostatin, a specific inhibitor of nSMases. The EhnSM1 and EhnSM3 were detected in the soluble fraction of the amebic lysate as 35-37 kDa proteins by western blot analysis. Immunofluorescence assay showed that the overexpressed HA-tagged EhnSM1 and EhnSM3 were localized to the cytosol. The biological role of these novel E. histolytica nSMases described in this work remains to be determined.     

Expression, purification and characterization of recombinant (E)-beta-farnesene synthase from Artemisia annua

A cDNA clone (GenBank Accession No. AY835398) encoding a sesquiterpene synthase, (E)-β-farnesene synthase, has been isolated from Artemisia annua L. It contains a 1746-bp open reading frame coding for 574 amino acids (66.9 kDa) with a calculated pI = 5.03. The deduced amino acid sequence is 30-50% identical with sequences of other sesquiterpene synthases from angiosperms. The recombinant enzyme, produced in Escherichia coli, catalyzed the formation of a single product, β-farnesene, from farnesyl diphosphate. The pH optimum for the recombinant enzyme is around 6.5 and the K_m- and k_cat-values for farnesyl diphosphate, is 2.1 μM and 9.5 × 10⁻³ s⁻¹, respectively resulting in the efficiency 4.5 × 10⁻³ M⁻¹ s⁻¹. The enzyme exhibits substantial activity in the presence of Mg²⁺, Mn²⁺ or Co²⁺ but essentially no activity when Zn²⁺, Ni²⁺ or Cu²⁺ is used as cofactor. The concentration required for maximum activity are estimated to 5 mM, 0.5 mM and <10 μM for Mg²⁺, Co²⁺ or Mn²⁺, respectively. Geranyl diphosphate is not a substrate for the recombinant enzyme.     

Purification, enzymatic properties of a recombinant d-hydantoinase and its dissociation by zinc ion

Summary A d-hydantoinase was expressed in the soluble form by a recombinant E. coli strain, pE-HDT/E. coli BL21 in LB medium. The enzymatic activity of cultured cells reached 5.2–6.5 IU/ml culture at a cell turbidity of 10 at 600 nm. The expressed enzyme was efficiently purified by three steps, ammonium sulfate fractionation, Phenyl-Sepharose hydrophobic interaction chromatography and Sephacryl S-200 size-exclusion chromatography. With the above purification process, the enzyme was purified to more than 95% purity as estimated by SDS-PAGE. The overall recovery of enzymatic activity was 54.4% and the specific activity for substrate dl-hydantoin achieved 48 U/mg. The purified enzyme appeared as a dimer with a molecular mass of 103 kDa, as measured by size-exclusion chromatography. The enzyme was stable from pH 6 to 12 with an optimum pH at 9.5 The optimum temperature of the enzyme was 45 °C and it activity was rapidly lost over 55 °C. Divalent metal ions, including Co²⁺, Mn²⁺ and Ni ²⁺ ions obviously enhanced the enzymatic activity, while Zn²⁺ ion had a slight inhibitory effect. In addition, the dissociation of purified enzyme into its subunits occurred in the presence of 1 mM Zn²⁺ ion. The effect of different metal ions on the d-hydantoinase activation/attenuation was discussed.     

Purification and biochemical characterization of a new alkali-stable laccase from Trametes sp. isolated in Tunisia: role of the enzyme in olive mill waste water treatment

A white-rot basidiomycete, isolated from decayed acacia wood (from Northwest of Tunisia) and identified as Trametes sp, was selected in a broad plate screening because of its ability to decolorize and dephenolize olive oil mill wastewater (OMW) efficiently. The major laccase was purified and characterized as a monomeric protein with apparent molecular mass of 61 kDa (SDS-PAGE). It exhibits high enzyme activity over broad pH and temperature ranges with optimum activity at pH 4.0 and a temperature of 60 °C. The purified laccase is stable at alkaline pH values. The enzyme retained 50 % of its activity after 90 min of incubation at 55 °C. Using ABTS, this laccase presented K _m and V _max values of 0.05 mM and 212.73 μmoL min^?1 mg^?1, respectively. It has shown a degrading activity towards a variety of phenolic compounds. The purified laccase was partially inhibited by Fe²⁺, Zn²⁺, Cd²⁺ and Mn²⁺, while Cu²⁺ acted as inducer. EDTA (10 mM) and NaN₃ (10 mM) were found to completely inhibit its activity. 73 % OMW was dephenolized after 315 min incubation at 30 °C with 2 U mL^?1 of laccase and 2 mM HBT.     

Purification and Characterization of Microbial Protease Produced Extracellularly from <Emphasis Type="Italic">Bacillus subtilis</Emphasis> FBL-1

An ammonium sulfate precipitation of fermentation broth produced by Bacillus subtilis FBL-1 resulted in 2.9-fold increase of specific protease activity. An eluted protein fraction from the column chromatographies using DEAE-Cellulose and Sephadex G-75 had 94.2- and 94.9-fold higher specific protease activity, respectively. An SDS-PAGE revealed a band of purified protease at approximately 37.6 kDa. Although purified protease showed the highest activity at 45°C and pH 9.0, the activity remained stable in temperature range from 30 to 50°C and pH range from 7.0 to 9.0. Protease activity was activated by metal ions such as Ca²⁺, Mg²⁺, Mn²⁺, Fe²⁺, Ca²⁺ and K⁺, but 10 mM Fe³⁺ significantly inhibited enzyme activity (53%). Protease activity was inhibited by 2 mM EDTA as a metalloprotease inhibitor, but it showed good stability against surfactants and organic solvents. The preferred substrates for protease activity were found to be casein (100%) and soybean flour (71.6%).     

Cloning and Expression of a Novel Chitinase chi58 from Chaetomium cupreum in Pichia pastoris

A gene encoding a novel chitinase chi58 was cloned from the fungus Chaetomium cupreum by using inverse PCR. The DNA sequence of chi58 contains a 1,602 bp open reading frame and two introns that are 52 and 201 bp in length. Regarding our in silico analysis, chi58 is a modular enzyme composed of a family-18 catalytic domain, which is responsible for chitinase activity, and a chitin-binding domain containing several cysteines. Apparently, the function of these domains is to anchor the enzyme tightly onto the large insoluble polymeric substrate. Chi58 has a pI of 4.47 and a deduced molecular mass of 58 kDa. The optimal pH and temperature conditions were determined to be 5.8 and 45°C, respectively, when colloidal chitin was used as the substrate. SDS-PAGE and zymogram analyses indicated the presence of a single active chitinase. Cells with pPIC9K-chi58 produced an extracellular chitinase that had an activity of 39 U/ml protein. Metal ions such as Ba²⁺, Mg²⁺, K⁺, Cu²⁺, Fe³⁺, Zn²⁺, and Co²⁺ also influenced the activity of the recombinant enzyme.     

Purification and characterization of β-agarase from seaweed decomposing bacterium <Emphasis Type="Italic">Microbulbifer</Emphasis> sp. Strain CMC-5

Microbulbifer strain CMC-5 was isolated from decomposing seaweeds, and was found to degrade agar, alginate, carboxymethyl cellulose, carrageenan, xylan, and chitin. The extracellular agarase enzyme from strain CMC-5 was purified 103-fold by ultrafiltration, ion-exchange chromatography, using diethylaminoethyl sepharose FF, and gel filtration, using sephacryl S-300HR, with a yield of 6.7%. Zymogram and protein staining of the purified agarase on a SDS-polyacrylamide gel revealed a single band, with an apparent molecular weight of 59 kDa. The purified enzyme was endo-type β-agarase, as it was able to hydrolyze the β-1, 4 glycosidic linkages of agarose, releasing neoagarotetraose and neoagarohexaose as the end products. The optimum pH and temperature of agarase were 7 and 50°C, respectively. Thermal stability studies indicated that the agarase retained 62% of its activity after incubating at 50°C for 30 min. Treatment with EDTA reduced the agarase activity by 54%. The agarase activity was stimulated by the presence of Ca²⁺ and Mg²⁺ ions; whereas, Zn²⁺, Hg²⁺, Cu²⁺, Fe²⁺, and Co²⁺ abolished the activity. Further, the presence of NaCl at concentrations lower than 100 mM caused a decrease in the agarase activity; whereas, the activity was enhanced up to a concentration of 500 mM.     

Cloning,expression and characterization of d-aminoacylase from Achromobacter xylosoxidans subsp. denitrificans ATCC 15173

d-Aminoacylase catalyzes the conversion of N-acyl-d-amino acids to d-amino acids and fatty acids. The aim of this study was to identify the d-aminoacylase gene from Achromobacter xylosoxidans subsp. denitrificans ATCC 15173 and investigate the biochemical characterization of the enzyme. A previously uncharacterized d-aminoacylase gene (ADdan) from this organism was cloned and sequenced. The open reading frame (ORF) of ADdan was 1467 bp in size encoding a 488-amino acid polypeptide. ADdan, with a high amino acid similarity to N-acyl-d-aspartate amidohydrolase from Alcaligenes A6, showed relatively low sequence similarities to other characterized d-aminoacylases. The recombinant ADdan protein was expressed in Escherichia coli BL21 (DE3) using pET-28a with a T7 promoter. The enzyme was purified in a single chromatographic step using nickel affinity gel column. The molecular mass of the expressed protein, calculated by SDS–PAGE, was about 52 kDa. The purified ADdan showed optimal activity at pH 8.0 and 50 °C, and was stable at pH 6.0–8.0 and up to 45 °C. Its activity was inhibited by Cu²⁺, Fe²⁺, Ca²⁺, Mn²⁺, Ni²⁺, Zn²⁺ and Hg²⁺, whereas Mg²⁺ had no significant influence on this recombinant d-aminoacylase. This is the first report on the characterization of d-aminoacylase with activity towards both N-acyl derivatives of neutral d-amino acids and N-acyl-d-aspartate. The characteristics of ADdan could prove to be of interest in industrial production of d-amino acids.     

Isolation and characterization of dioscin-α-l-rhamnosidase from bovine liver

A novel dioscin-α-l-rhamnosidase was isolated and purified from fresh bovine liver. The activity of the enzyme was tested using diosgenyl-2,4-di-O-α-l-rhamnopyranosyl-β-d-glucopyranoside as a substrate. It was cleaved by the enzyme to two compounds, rhamnoses and diosgenyl-O-β-d-glucopyranoside. The optimal conditions for enzyme activity were that temperature was at 42 °C, pH was at 7, reaction time was at 4 h, and the substrate concentration was at 2%. Furthermore, metal ions such as Fe³⁺, Cu²⁺, Zn²⁺, Ca²⁺ and Mg²⁺ showed different effects on the enzyme activity. Mg²⁺ acted as an activator whereas Cu²⁺, Fe³⁺, and Zn²⁺ acted as strong inhibitors in a wide range of concentrations from 0 to 200 mM. It was interesting that Ca²⁺ played a role as an inhibitor when its concentration was at 10 mM and acted as an activator at the other concentrations for the enzyme. Moreover, the molecular weight of enzyme was determined as 75 kDa.     

Purification and biochemical characterization of two extracellular peroxidases from Phanerochaete chrysosporium responsible for lignin biodegradation

Two extracellular peroxidases from Phanerochaete chrysosporium, namely a lignin peroxidase (LiP) and manganese peroxidase (MnP), were purified simultaneously by applying successively, ultrafiltration, ion-exchange and gel filtration chromatography. LiP and MnP have a molecular mass of 36 and 45 kDa, respectively. The optimal pHs for LiP and MnP activities were 3.0 and 4.5, respectively. Both peroxidases showed maximal activity at 30 °C and moderate thermostability. MnP activity was strongly inhibited by Fe²⁺, Zn²⁺, Mg²⁺ and Hg²⁺, and enhanced by Mn²⁺, Ca²⁺ and Cu²⁺. LiP activity was enhanced by Ca²⁺, Na⁺ and Co²⁺ and it was inhibited in the presence of K⁺, Hg⁺, Fe²⁺, Mg²⁺ and high concentrations of Cu²⁺ and Zn²⁺. The K_m and V_max for LiP toward veratryl alcohol as a substrate were 0.10 mM and 15.2 U mg⁻¹, respectively and for MnP toward Mn²⁺, they were respectively 0.03 mM and 25.5 U mg⁻¹. The two peroxidases were also able to break down rice lignin in a small-scale solid state treatment system. Data suggest these two peroxidases may be considered as potential candidates for the development of enzyme-based technologies for lignin degradation.     

Production and partial characterization of two types of phytase from Aspergillus niger NCIM 563 under submerged fermentation conditions

Novel extracellular phytase was produced by Aspergillus niger NCIM 563 under submerged fermentation conditions at 30 °C in medium containing dextrin and glucose as carbon sources along with sodium nitrate as nitrogen source. Maximum phytase activity (41.47 IU/mL at pH 2.5 and 10.71 IU/mL at pH 4.0) was obtained when dextrin was used as carbon source along with glucose and sodium nitrate as nitrogen source. Nearly 13 times increase in phytase activity was observed when phosphate in the form of KH₂PO₄ (0.004 g/100 mL) was added in the fermentation medium. Physic-chemical properties of partially purified enzyme indicate the possibility of two distinct forms of phytases, Phy I and Phy II. Optimum pH and temperature for Phy I was 2.5 and 60 °C while Phy II was 4.0 and 60 °C, respectively. Phy I was stable in the pH range 1.5–3.5 while Phy II was stable in the wider pH range, 2.0–7.0. Molecular weight of Phy I and Phy II on Sephacryl S-200 was approximately 304 kDa and 183 kDa, respectively. Phy I activity was moderately stimulated in the presence of 1 mM Mg²⁺, Mn²⁺, Ca²⁺ and Fe³⁺ ions and inhibited by Zn²⁺ and Cd²⁺ ions while Phy II activity was moderately stimulated by Fe³⁺ ions and was inhibited by Hg²⁺, Mn²⁺ and Zn²⁺ ions at 1 mM concentration in reaction mixture. The Km for Phy I and II was 3.18 and 0.514 mM while Vmax was 331.16 and 59.47 μmols/min/mg protein, respectively.     

Purification and Characterization of Extracellular Phytase from a Marine Yeast <Emphasis Type="Italic">Kodamaea ohmeri</Emphasis> BG3

The extracellular phytase in the supernatant of cell culture of the marine yeast Kodamaea ohmeri BG3 was purified to homogeneity with a 7.2-fold increase in specific phytase activity as compared to that in the supernatant by ammonium sulfate fractionation, gel filtration chromatography (Sephadex™ G-75), and anion-exchange chromatography (DEAE Sepharose Fast Flow Anion-Exchange). According to the data from sodium dodecyl sulfate-polyacrylamide gel electrophoresis, the molecular mass of the purified enzyme was estimated to be 98.2 kDa while the molecular mass of the purified enzyme was estimated to be 92.9 kDa and the enzyme was shown to be a monomer according to the results of gel filtration chromatography. The optimal pH and temperature of the purified enzyme were 5.0 and 65°C, respectively. The enzyme was stimulated by Mn²⁺, Ca²⁺, K⁺, Li⁺, Na⁺, Ba²⁺, Mg²⁺ and Co²⁺ (at a concentrations of 5.0 mM), but it was inhibited by Cu²⁺, Hg²⁺, Fe²⁺, Fe³⁺, Ag⁺, and Zn²⁺ (at a concentration of 5.0 mM). The enzyme was also inhibited by phenylmethylsulfonyl fluoride (PMSF), iodoacetic acid (at a concentration of 1.0 mM), and phenylgloxal hydrate (at a concentration of 5.0 mM), and not inhibited by EDTA and 1,10-phenanthroline (at concentrations of 1.0 mM and 5.0 mM). The K _m, V _max, and K _cat values of the purified enzyme for phytate were 1.45 mM, 0.083 μmol/ml · min, and 0.93 s^-1, respectively.     

Characterization of a lysin from deep-sea thermophilic bacteriophage GVE2

Thermostable enzymes from thermophiles have attracted extensive studies. However, little is known about thermophilic lysin of bacteriophage obtained from deep-sea hydrothermal vent. In this study, a lysin from deep-sea thermophilic bacteriophage Geobacillus virus E2 (GVE2) was characterized for the first time. It was found that the GVE2 lysin was highly homologous with N-acetylmuramoyl-L-alanine amidases. After expression in Escherichia coli, the recombinant GVE2 lysin was purified. The recombinant lysin was active over a range of temperature from 40 °C to 80 °C, with an optimum at 60 °C. Its optimal pH was 6.0, and it was stable over a wide range of pH from 4.0 to 10.0. The lysin was highly active when some enzyme inhibitors or detergents (phenylmethylsulfonyl fluoride, Tween 20, Triton X-100, and chaps) were used. However, it was strongly inhibited by sodium dodecyl sulfate and ethylene diamine tetraacetic acid. Its enzymatic activity could be slightly stimulated in the presence of Na⁺ and Li⁺. But the metal ions Mg²⁺, Ba²⁺, Zn²⁺, Fe³⁺, Ca²⁺, and Mn²⁺ at concentrations of 1 or 10 mM showed inhibitions to the lysin activity. Our study demonstrated the first characterization of lysin from deep-sea thermophilic bacteriophage.     

Genetic and biochemical properties of an extracellular neutral metalloprotease from Staphylococcus hyicus subsp. hyicus

The gene encoding the extracellular neutral metalloprotease ShpI from Staphylococcus hyicus subsp. hyicus was cloned. DNA sequencing revealed an ORF of 1317 nucleotides encoding a 438 amino acid protein with Mr of 49698. When the cloned gene was expressed in Staphylococcus carnosus, a 42 kDa protease was found in the culture medium. The protease was purified from both S. carnosus (pCAshp1) and S. hyicus subsp. hyicus. The N-terminal amino acid sequences of the two proteases revealed that ShpI is organized as a pre-pro-enzyme with a proposed 26 amino acid signal peptide, a 75 amino acid hydrophilic pro-region, and a 337 amino acid extracellular mature form with a calculated Mr of 38394. The N-termini showed microheterogeneity in both host strains. ShpI had a maximum proteolytic activity at 55°C and pH 7.4–8.5. The protease, which had a low substrate specificity, could be inhibited by metal- and zinc-specific inhibitors, such as EDTA and 1,10-phenanthroline. Insensitivity to phosphoramidon separates ShpI from the thermolysin-like family. The conserved Zn²⁺ binding motif, the only homology to other proteases, and the reactivation of the apoenzyme by Zn²⁺, indicated that Zn²⁺ is the catalytic ion. Ca²⁺ very probably acts as a stabilizer. We also demonstrated the presence of a second extracellular protease in S. hyicus subsp. hyicus.     

Heterologous expression and characterization of endocellulase from the Japanese pine sawyer Monochamus saltuarius (MsGHF5)

In this study, the endocellulase gene from Monochamus saltuarius (MsGHF5) was transformed into Escherichia coli (RosettaBlue(DE3)pLysS strain), and induced by IPTG. The molecular weight of recombinant MsGHF5 (rMsGHF5) was 78 kDa and was expressed as a fusion protein with maltose binding protein in pMAL‐c2 expression vector. Native‐PAGE was conducted with 0.1% carboxymethyl cellulose as a substrate, and the zymogenic bands were observed. The Michaelis constant and maximum velocity of rMsGHF5 were 0.199 mg/mL and 0.034 μmol/min/mL, respectively. The optimal condition for rMsGHF5 occurred at pH 5 and 30°C. Fe²⁺ and Mn²⁺ stimulated the activity of rMsGHF5 by 167 and 114% respectively, whereas Cu²⁺, Hg²⁺ and Zn²⁺ inhibited its activity.