Antibody array analysis with label-based detection and resolution of protein size

Elements from DNA microarray analysis, such as sample labeling and micro-spotting of capture reagents, have been successfully adapted to multiplex measurements of soluble cytokines. Application in cell biology is hampered by the lack of mono-specific antibodies and the fact that many proteins occur in complexes. Here, we incorporated a principle from Western blotting and resolved protein size as an additional parameter. Proteins from different cellular compartments were labeled and separated by size exclusion chromatography into 20 fractions. All were analyzed with replicate antibody arrays. The elution profiles of all antibody targets were compiled to color maps that resemble Western blots with bands of antibody reactivity across the size separation range (670-10 kDa). A new solid phase designed for processing in microwell plates was developed to handle the large number of samples. Antibodies were bound to protein G-coupled microspheres surface-labeled with 300 combinations of four fluorescent dyes. Fluorescence from particle color codes and the protein label were measured by high-speed flow cytometry. Cytoplasmic protein kinases were detected as bands near predictable elution points. For proteins with atypical elution characteristics or multiple contexts, two or more antibodies were used as internal references of specificity. Membrane proteins eluted near the void volume, and additional bands corresponding to intracellular forms were detected for several targets. Elution profiles of cyclin-dependent kinases (cdks), cyclins, and cyclin-dependent kinase inhibitors, were compatible with their occurrence in complexes that vary with the cell cycle phase and subcellular localization. A two-dimensional platform circumvents the need for mono-specific capture antibodies and extends the utility of antibody array analysis to studies of protein complexes.     

Protein microarrays for antibody profiling: specificity and affinity determination on a chip

Protein microarray technology facilitates the detection and quantification of hundreds of binding reactions in one reaction from a minute amount of sample. Proof-of-concept studies have shown that the set-up of sensitive assay systems based on protein arrays is possible, however, the lack of specific capture reagents limits their use. Therefore, the generation and characterisation of capture molecules is one of the key topics for the development of protein array based systems. Recombinant antibody technologies, such as HuCAL (human combinatorial antibody library; MorphoSys, Munich, Germany), allow the fast generation of highly specific binders to nearly any given target molecule. Although antibody libraries comprise billions of members, it is not the selection process, but the detailed characterisation of the pre-selected monoclonal antibodies that presents the bottleneck for the production of high numbers of specific binders. In order to obtain detailed information on the properties of such antibodies, a microarray-based method has been developed. We show that it is possible to define the specificity of recombinant Fab fragments by protein and peptide microarrays and that antibodies can be classified by binding patterns. Since the assay uses a miniaturised system for the detection of antibody-antigen interactions, the observed binding occurs under ambient analyte conditions as defined by Ekins (J. Pharm. Biomed. Anal. 1989, 7, 155-168). This allows the determination of a relative affinity value for each binding event, and a ranking according to affinity is possible. The new microarray based approach has an extraordinary potential to speed up the screening process for the generation of recombinant antibodies with pre-defined selection criteria, since it is intrinsically a high-throughput technology.     

Simultaneously Capturing Real-time Images in Two Emission Channels Using a Dual Camera Emission Splitting System: Applications to Cell Adhesion

Multi-color immunofluorescence microscopy to detect specific molecules in the cell membrane can be coupled with parallel plate flow chamber assays to investigate mechanisms governing cell adhesion under dynamic flow conditions. For instance, cancer cells labeled with multiple fluorophores can be perfused over a potentially reactive substrate to model mechanisms of cancer metastasis. However, multi-channel single camera systems and color cameras exhibit shortcomings in image acquisition for real-time live cell analysis. To overcome these limitations, we used a dual camera emission splitting system to simultaneously capture real-time image sequences of fluorescently labeled cells in the flow chamber. Dual camera emission splitting systems filter defined wavelength ranges into two monochrome CCD cameras, thereby simultaneously capturing two spatially identical but fluorophore-specific images. Subsequently, psuedocolored one-channel images are combined into a single real-time merged sequence that can reveal multiple target molecules on cells moving rapidly across a region of interest.     

Sequential Multiplex Analyte Capturing for Phosphoprotein Profiling

Microarray-based sandwich immunoassays can simultaneously detect dozens of proteins. However, their use in quantifying large numbers of proteins is hampered by cross-reactivity and incompatibilities caused by the immunoassays themselves. Sequential multiplex analyte capturing addresses these problems by repeatedly probing the same sample with different sets of antibody-coated, magnetic suspension bead arrays. As a miniaturized immunoassay format, suspension bead array-based assays fulfill the criteria of the ambient analyte theory, and our experiments reveal that the analyte concentrations are not significantly changed. The value of sequential multiplex analyte capturing was demonstrated by probing tumor cell line lysates for the abundance of seven different receptor tyrosine kinases and their degree of phosphorylation and by measuring the complex phosphorylation pattern of the epidermal growth factor receptor in the same sample from the same cavity.Phosphorylation of proteins is an integral part of the signal transduction of eukaryotic cells as it modulates the activity of complex protein networks. Although Western blot- and immunoprecipitation-based MS approaches (1, 2) can lead to detailed insights into these processes, most of the integrated approaches only allow a static view of protein phosphorylation because they are not suitable for the screening of hundreds of samples. Either planar or bead array-based sandwich immunoassays can be used to analyze the quantity and activation state of signaling molecules in multiplex, enabling the systematic profiling of protein abundance and post-translational modifications (3–6) in hundreds of samples. However, multiplex immunoassays are only suitable for the simultaneous analysis of a limited number of proteins. The detection of comprehensive phosphorylation patterns is difficult as this involves assay systems that are incompatible with multiplexing.In principle, two sandwich immunoassay setups are possible for probing the phosphorylation state of a protein. The first setup applies a capture antibody specific for a non-modified part of the protein and uses a phosphorylation state-specific detection antibody. When applied to an array-based format, however, this setup does not allow for the simultaneous measurement of the abundance and the degree of phosphorylation (3, 4). A mixture of detection antibodies, one specific for the phosphorylation site and one specific for the non-modified site of the protein, would bind simultaneously to the two different epitopes, and assay signals could not be further deconvoluted by the spatial or color code of the array. The second sandwich immunoassay setup for the analysis of protein phosphorylation applies a phosphorylation state-specific capture antibody and a protein-specific detection antibody. In such a setup, an anti-phosphotyrosine antibody (e.g. mAb 4G10) cannot be applied as a capture antibody because a huge variety of tyrosine phosphorylated proteins would be captured, and specific signals could rarely be deconvoluted. Using capture antibodies that bind to phosphorylated epitopes in the context of their flanking amino acids is not a problem until a multiplex readout is desired. If one antibody specific for the phosphosite and one antibody specific for the abundance of a protein are used together in a multiplex assay panel they might compete for their analyte. The situation becomes even more complex if the protein of interest contains various phosphorylation sites such as e.g. the epidermal growth factor receptor. Several capture antibodies target different epitopes of the same protein and therefore compete for the overall amount of targeted protein in the sample, thus making a valid simultaneous measurement problematic.Although different ways of tackling the problem of assay multiplexing are in use, we demonstrated the feasibility to sequentially perform such incompatible assays from the same sample using a magnetic particle handler that moves particles through the samples and reagents (Fig. 1). Using a model assay, we confirmed that suspension bead array-based immunoassays work under ambient analyte conditions. As described by Roger Ekins (7), decreasing of the amount of capture antibody in a sandwich immunoassay setup from a macrospot (e.g. a microtiter plate assay) to a microspot generates a scenario where only a tiny fraction of the present target analytes is captured on the microspot. Therefore, the overall concentration of the analyte molecules in the sample does not change significantly even in the case of low target concentrations and high affinity binding reactions. Furthermore, as the initial concentration of the analyte is not significantly changed when performing a miniaturized sandwich immunoassay, multiple post-translational modifications within the same protein can be measured either in sequence or in parallel in the same multiplex panel.Open in a separate windowFig. 1.Sequential multiplex analyte capturing. Magnetic suspension bead array assays can be performed sequentially, reusing the same sample material (indicated by the blue arrow). The use of a magnetic particle handler enables the quantitative transfer (black arrow) of the magnetic beads from the sample well into the wells containing washing solutions or other assay reagents. Magnetic beads from the first bead array panel are incubated with the samples to capture their respective analyte. Then the magnetic beads are subjected to washing and detection steps and are finally transferred into the readout plate (first row). After retracting the magnetic suspension bead array of the first assay panel from the sample, a bead array from the second assay panel is added and processed as described above but using different detection antibodies (second row). A third bead array assay panel can be applied after removing the second panel (third row) and so on.By probing tumor cell lines for the abundance of seven different receptor tyrosine kinases and their generic tyrosine phosphorylation, we generated complex phosphorylation patterns and thereby demonstrated the potential of this approach. More importantly, demonstrating ambient analyte conditions allowed the parallel detection of phosphorylation at different sites of the EGFR1 using phosphorylation site-specific antibodies as capture molecules with one assay panel. Phosphorylation of eight different sites and the abundance of the EGFR could be quantified relative to one another without any interference of the different immunoassays during multiplexing because competition for the analyte can be prevented by running the assays under ambient analyte conditions.     

Individual mitochondrion characterization: a comparison of classical assays to capillary electrophoresis with laser-induced fluorescence detection.

A method has been developed that uses capillary electrophoresis (CE) with laser-induced fluorescence detection (LIF) for measuring protein abundance in individual mitochondria collected from a discontinuous density gradient and labeled with Mitotracker Green. From these measurements we determined the distribution of protein content per mitochondrion and the relative abundance of mitochondrial proteins in density gradient fractions. In addition, this method is useful for counting mitochondria and, as a consequence, determining the number of mitochondria per unit volume or estimate mitochondria copy number per cell. It was determined that mitochondria accumulate in two interfaces defined by consecutive layers of 35% Metrizamide, 17% Metrizamide, and 6% Percoll. The presence of mitochondria in these interfaces was also confirmed using a modified Lowry assay that prevents interference from Metrizamide and Percoll and determines total protein content, and a succinate dehydrogenase assay that uses dichloroindophenol as an electron acceptor and that specifically indicates abundance of mitochondria. The CE-LIF analysis of mitochondrial properties, based on the individual mitochondrial determinations, has a wider scope than the average values determined by enzymatic or bulk protein assays.     

Protein microarrays for highly parallel detection and quantitation of specific proteins and antibodies in complex solutions

Background  

We have developed and tested a method for printing protein microarrays and using these microarrays in a comparative fluorescence assay to measure the abundance of many specific proteins in complex solutions. A robotic device was used to print hundreds of specific antibody or antigen solutions in an array on the surface of derivatized microscope slides. Two complex protein samples, one serving as a standard for comparative quantitation, the other representing an experimental sample in which the protein quantities were to be measured, were labeled by covalent attachment of spectrally resolvable fluorescent dyes.     

Proteins exposed at the adult schistosome surface revealed by biotinylation

The human blood-dwelling parasite Schistosoma mansoni can survive in the hostile host environment for decades and must therefore display effective strategies to evade the host immune responses. The surface of the adult worm is covered by a living syncytial layer, the tegument, bounded by a complex multilaminate surface. This comprises a normal plasma membrane overlain by a secreted bilayer, the membranocalyx. Recent proteomic studies have identified constituents of the tegument, but their relative locations remain to be established. We labeled the most exposed surface proteins using two impermeant biotinylation reagents that differed only in length. We anticipated that the two reagents would display distinct powers of penetration, thereby producing a differential labeling pattern. The labeled proteins were recovered by streptavidin affinity and identified by tandem mass spectrometry. A total of 28 proteins was identified, 13 labeled by a long form reagent and the same 13 plus a further 15 labeled by a short form reagent. The parasite proteins included membrane enzymes, transporters, and structural proteins. The short form reagent additionally labeled some cytosolic and cytoskeletal proteins, the latter being constituents of the intracellular spines. Only a single secreted protein was labeled, implying a location between the plasma membrane and the membranocalyx or as part of the latter. Four host proteins, three immunoglobulin heavy chains and C3c/C3dg, a fragment of complement C3, were labeled by both reagents indicating their exposed situation. The presence of the degraded complement C3 implicates inhibition of the classical pathway as a major element of the immune evasion strategy, whereas the recovery of only one truly secreted protein points to the membranocalyx acting primarily as an inert protective barrier between the immune system and the tegument plasma membrane. Collectively the labeled parasite proteins merit investigation as potential vaccine candidates.     

Quantitative proteome analysis using differential stable isotopic labeling and microbore LC-MALDI MS and MS/MS

We demonstrate an approach for global quantitative analysis of protein mixtures using differential stable isotopic labeling of the enzyme-digested peptides combined with microbore liquid chromatography (LC) matrix-assisted laser desorption ionization (MALDI) mass spectrometry (MS). Microbore LC provides higher sample loading, compared to capillary LC, which facilitates the quantification of low abundance proteins in protein mixtures. In this work, microbore LC is combined with MALDI MS via a heated droplet interface. The compatibilities of two global peptide labeling methods (i.e., esterification to carboxylic groups and dimethylation to amine groups of peptides) with this LC-MALDI technique are evaluated. Using a quadrupole-time-of-flight mass spectrometer, MALDI spectra of the peptides in individual sample spots are obtained to determine the abundance ratio among pairs of differential isotopically labeled peptides. MS/MS spectra are subsequently obtained from the peptide pairs showing significant abundance differences to determine the sequences of selected peptides for protein identification. The peptide sequences determined from MS/MS database search are confirmed by using the overlaid fragment ion spectra generated from a pair of differentially labeled peptides. The effectiveness of this microbore LC-MALDI approach is demonstrated in the quantification and identification of peptides from a mixture of standard proteins as well as E. coli whole cell extract of known relative concentrations. It is shown that this approach provides a facile and economical means of comparing relative protein abundances from two proteome samples.     

赭曲霉毒素A和玉米赤霉烯酮-二联胶体金免疫层析试纸条的制备及应用

【背景】真菌毒素为真菌的有毒次级代谢产物,混合污染时毒性显著增强,可对人类和动物健康造成严重伤害。制备二联胶体金免疫层析试纸条,实现对常见真菌毒素混合污染的快速监测,具有重要意义。【目的】制备赭曲霉毒素A (Ochratoxin A,OTA)和玉米赤霉烯酮(Zeralenone,ZEN)金标单克隆抗体,基于免疫层析原理,采用竞争反应模式,建立二联胶体金免疫层析检测法用于污染样品中OTA和ZEN的同时快速检测。【方法】采用柠檬酸钠还原法制备胶体金颗粒,并标记获得两种真菌毒素金标单克隆抗体,通过优化相关条件,建立稳定的二联胶体金免疫层析检测方法,用于同时检测谷物和饲料样品中的OTA和ZEN。【结果】制备的OTA和ZEN二联胶体金试纸条对OTA和ZEN的检测限分别为0.625 ng/mL和1.25 ng/mL,且与谷物和饲料中其它真菌毒素(黄曲霉毒素B1、伏马毒素B1、桔青霉毒素、展青霉毒素和呕吐毒素)均无交叉反应,人工添加试验结果准确。对天然样本检测结果表明该方法与LC-MS/MS一致性良好。【结论】本研究制备的二联胶体金试纸条可用于实际样品中OTA和ZEN的同时快速筛查。     

Detecting differential and correlated protein expression in label-free shotgun proteomics

Recent studies have revealed a relationship between protein abundance and sampling statistics, such as sequence coverage, peptide count, and spectral count, in label-free liquid chromatography-tandem mass spectrometry (LC-MS/MS) shotgun proteomics. The use of sampling statistics offers a promising method of measuring relative protein abundance and detecting differentially expressed or coexpressed proteins. We performed a systematic analysis of various approaches to quantifying differential protein expression in eukaryotic Saccharomyces cerevisiae and prokaryotic Rhodopseudomonas palustris label-free LC-MS/MS data. First, we showed that, among three sampling statistics, the spectral count has the highest technical reproducibility, followed by the less-reproducible peptide count and relatively nonreproducible sequence coverage. Second, we used spectral count statistics to measure differential protein expression in pairwise experiments using five statistical tests: Fisher's exact test, G-test, AC test, t-test, and LPE test. Given the S. cerevisiae data set with spiked proteins as a benchmark and the false positive rate as a metric, our evaluation suggested that the Fisher's exact test, G-test, and AC test can be used when the number of replications is limited (one or two), whereas the t-test is useful with three or more replicates available. Third, we generalized the G-test to increase the sensitivity of detecting differential protein expression under multiple experimental conditions. Out of 1622 identified R. palustris proteins in the LC-MS/MS experiment, the generalized G-test detected 1119 differentially expressed proteins under six growth conditions. Finally, we studied correlated expression of these 1119 proteins by analyzing pairwise expression correlations and by delineating protein clusters according to expression patterns. Through pairwise expression correlation analysis, we demonstrated that proteins co-located in the same operon were much more strongly coexpressed than those from different operons. Combining cluster analysis with existing protein functional annotations, we identified six protein clusters with known biological significance. In summary, the proposed generalized G-test using spectral count sampling statistics is a viable methodology for robust quantification of relative protein abundance and for sensitive detection of biologically significant differential protein expression under multiple experimental conditions in label-free shotgun proteomics.     

Immunoproteomics

A novel immunoproteomic assay, combining specificity of antibody with precision of mass spectral analysis is described, and a number of practical applications are presented. The assay is carried out in three steps. The first step of the assay involves antibody immobilization, using a bacterial Fc binding support. The second step is antigen capture and washing to remove non-specific binding. The third step involves analysis of the captured antigens by SELDI-TOF. The assay has many advantages in sensitivity, speed, and economy of reagents in detection of specific antigens or antibodies. In addition, under appropriate experimental conditions, semi-quantitative data may be obtained. By combining the increasing range of selective specific antibody reagents available, in part due to advances in antibody engineering technology, and the resolving power available, using mass spectrometry, immunoproteomics is a valuable technique in proteomic analysis. A number of examples of the application of this technique to analysis of biological systems are presented.     

Detection of biological threat agents by immunomagnetic microsphere-based solid phase fluorogenic- and electro-chemiluminescence

This article reviews the recent development of two solid-phase chemiluminescence-based techniques, fluorogenic-chemiluminescence (FCL) and electro-chemiluminescence (ECL) for detection of biological threat agents. Both techniques entail a labeled sandwich immunoassay. The objectives of this work are to develop advanced techniques for sensitive and effective detection of a target analyte, particularly in cases where the analysis includes complex samples containing multiple contaminating factors. Other important considerations in developing such detection techniques include the ease of use, the rapid determination of the results, and system automation for field applications. In FCL, alkaline phosphatase is used as a label and this technique utilizes the dual features of fluorescence and visual color generated upon the presence of the fluorogenic compound, AttoPhos. The assay reaction is determined by measuring the fluorescence. In ECL, the label is a ruthenium-trisbipyridal, which is excited to a higher energy state by an electric current-driven redox reaction, and the extent of the reaction is assessed via photon emission. Both techniques depend upon the magnetic separation technique as a means to isolate the target immunological agents from the sample for analysis. This magnetic capture system allows for a reaction to occur on the electron effective-transfer zone in the ECL and also provides the reaction site for the labeled sandwich in the FCL. Comparative studies of these two techniques for detection of biological threat agents have been performed and the advantages of using magnetic microspheres versus conventional solid-phase matrices are discussed.     

Protein microarrays for highly parallel detection and quantitation of specific proteins and antibodies in complex solutions

Background

We describe a method for printing protein microarrays, and using these microarrays in a comparative fluorescence assay to measure the abundance of many specific proteins in complex solutions. A robotic device was used to print hundreds of specific antibody or antigen solutions in an array on the surface of derivatized microscope slides. Two complex protein samples, one serving as a standard for comparative quantitation, and the other representing an experimental sample in which the concentrations of specific proteins were to be measured, were labeled by covalent attachment of spectrally-resolvable fluorescent dyes. Specific antibody-antigen interactions localized specific components of the complex mixtures to defined cognate spots in the array, where the relative intensity of the fluorescent signals representing the experimental sample and the reference standard provided a measure of each protein's abundance in the experimental sample. To characterize the specificity, sensitivity and accuracy of this assay, we analyzed the performance of 115 antibody/antigen pairs.

Results

50% of the arrayed antigens, and 20% of the arrayed antibodies, provided specific and accurate measurements of their cognate ligands at or below concentrations of 1.6 µg/ml and 0.34 µg/ml, respectively. Some of the antibody/antigen pairs allowed detection of the cognate ligands at absolute concentrations below 1 ng/ml, and partial concentrations of less than 1 part in 10⁶, sensitivities sufficient for measurement of many clinically important proteins in patient blood samples.

Conclusions

Protein microarrays can provide a simple and practical means to characterize patterns of variation in hundreds or thousands of different proteins, in clinical or research applications.     

Modeling and Estimation of Kinetic Parameters and Replicative Fitness of HIV-1 from Flow-Cytometry-Based Growth Competition Experiments

Growth competition assays have been developed to quantify the relative fitness of HIV-1 mutants. In this article, we develop mathematical models to describe viral/cellular dynamic interactions in the assay system from which the competitive fitness indices or parameters are defined. In our previous HIV-viral fitness experiments, the concentration of uninfected target cells was assumed to be constant (Wu et al. 2006). But this may not be true in some experiments. In addition, dual infection may frequently occur in viral fitness experiments and may not be ignorable. Here, we relax these two assumptions and extend our earlier viral fitness model (Wu et al. 2006). The resulting models then become nonlinear ODE systems for which closed-form solutions are not achievable. In the new model, the viral relative fitness is a function of time since it depends on the target cell concentration. First, we studied the structure identifiability of the nonlinear ODE models. The identifiability analysis showed that all parameters in the proposed models are identifiable from the flow-cytometry-based experimental data that we collected. We then employed a global optimization approach (the differential evolution algorithm) to directly estimate the kinetic parameters as well as the relative fitness index in the nonlinear ODE models using nonlinear least square regression based on the experimental data. Practical identifiability was investigated via Monte Carlo simulations.     

Development of a bead-based aptamer/antibody detection system for C-reactive protein

A multiplexing bead-based platform provides an approach for the development of assays targeting specific analytes for biomonitoring and biosensing applications. Multi-Analyte Profiling (xMAP) assays typically employ a sandwich-type format using antibodies for the capture and detection of analytes of interest, and the system permits the simultaneous quantitation of multiple targets. In this study, an aptamer/antibody assay for the detection of C-reactive protein (CRP) was developed. CRP is an acute phase marker of inflammation whose elevated basal levels are correlated with an increased risk for a number of pathologies. For this assay, an RNA aptamer that binds CRP was conjugated to beads to act as the capture agent. Biotinylated anti-CRP antibody coupled to fluorescently labeled streptavidin was used for quantification of CRP. The detection limit of the CRP assay was 0.4 mg/L in diluted serum. The assay was then used to detect spiked CRP samples in the range of 0.4 to 10 mg/L in diluted serum with acceptable recoveries (extrapolated values of 70–130%), including that of a certified reference material (129% recovery). The successful incorporation of the CRP aptamer into this platform demonstrates that the exploration of other aptamer–target systems could increase the number of analytes measurable using xMAP-type assays.     

Four color compensation.

Four-color immunophenotyping can now be routinely performed using either a single laser or dual laser flow cytometer. When a single laser instrument is used, the fluorochromes evaluated are usually FITC, PE, PE-TR and PE-CY5 (or PerCP). For two-laser excitation APC is generally used in place of PE-TR. Since each tandem dye construct contains PE, three of the four detectors are affected and compensation can be problematic. In this report we show that each tandem conjugated antibody, whether different batches from the same supplier or conjugates from different suppliers all require unique compensation. This inconsistency results in erroneous data, negates the use of single labeled particles as a method for providing adequate compensation and requires dual and triple labeled cells of known pattern to verify compensation. It is also shown that improper compensation can reduce or eliminate completely the detection of fluorescence emission from PECY5 conjugated antibodies. These problems are caused by a variation in energy transfer between PE and either TR or CY5 because the chemistry involved in preparation and conjugation to antibodies is not sufficiently controlled to produce reagents with uniform compensation requirements. The variation in tandem dye compensation can be addressed by either using the same tandem conjugated antibody, by using the same second step tandem reagent to an appropriate first step antibody or by using software compensation. The latter provides an easy solution because a unique compensation matrix can be produced for each antibody tandem conjugate.     

Channel-resolved multianalyte immunosensing system for flow-through chemiluminescent detection of alpha-fetoprotein and carcinoembryonic antigen

A novel flow-through immunosensing system for chemiluminescent (CL) multianalyte immunoassay was designed based on channel-resolved technique. Using alpha-fetoprotein (AFP) and carcinoembryonic antigen (CEA) as model analytes, two polyethersulfone membranes modified with the corresponding capture antibodies were set in two channels of a flow cell, and then two mixtures of the sample and corresponding alkaline phosphatase labeled antibodies were introduced into the channels for on-line incubation, respectively. Upon injection of CL substrate the catalyzed CL signals from the two channels were sequentially collected with the aid of an optical shutter for CL detection of two analytes. The antibodies immobilized membranes could be regenerated for reuse. Under optimal conditions AFP and CEA could be assayed in the ranges of 5.0-150 and 0.50-80 ng/ml with detection limits of 1.5 and 0.25 ng/ml, respectively. The assay results of clinical serum samples with the proposed system were in acceptable agreement with those with the reference method in single-analyte test mode. This novel immunosensing system based on the designed channel-resolved technique provided an automated, reusable, simple, sensitive and low-cost approach for multianalyte immunoassay without using of expensive array detector.